Citations (161)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (19)
Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
Read now
Chandra Sekhar Rakurty, Himabindu Nunna & Alagar K. Balaji. (2023) Dosage Based Directional Minimum Quantity Fluid Application in Machining. Machining Science and Technology 27:5, pages 531-555.
Read now
Read now
Hamed Adibi, Omid Hatami & Seyed Mehdi Rezaei. (2023) Effects of minimum quantity lubrication (MQL) on grinding processes using eco-friendly nanofluids: a review. Advances in Materials and Processing Technologies 0:0, pages 1-42.
Read now
Read now
Kulothungan S, Poovazhagan Lakshmanan, Sarangapani Palani & S. Sathiyamurthy. (2023) Micro-hexagonal Profile Making on Alloy276 by Fiber Laser: Desirability Approach. Materials and Manufacturing Processes 38:5, pages 608-617.
Read now
Read now
Ramazan Hakkı Namlu, Bahram Lotfi Sadigh & Sadık Engin Kiliç. (2021) An experimental investigation on the effects of combined application of ultrasonic assisted milling (UAM) and minimum quantity lubrication (MQL) on cutting forces and surface roughness of Ti-6AL-4V. Machining Science and Technology 25:5, pages 738-775.
Read now
Read now
Kore Mahesh, Jibin T Philip, S N Joshi & Basil Kuriachen. (2021) Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes 36:7, pages 753-791.
Read now
Read now
Murali Mohan Gurusamy & Balkrishna C. Rao. (2020) A new constitutive relation for simulating plastic flow involving continuous-shear or shear-localisation during metal cutting. Philosophical Magazine 100:4, pages 486-511.
Read now
Read now
Guangming Zheng, Xiang Cheng, Li Li, Jun Zhao, Guoyong Zhao & Yebing Tian. (2019) Experimental investigations on the failure mechanism and self-sharpening of a graded tool. Machining Science and Technology 23:4, pages 511-529.
Read now
Read now
M. Agmell, A. Ahadi, J. M. Zhou, R. L. Peng, V. Bushlya & J.-E. Ståhl. (2017) Modeling subsurface deformation induced by machining of Inconel 718. Machining Science and Technology 21:1, pages 103-120.
Read now
Read now
Guangming Zheng, Jun Zhao, Xiang Cheng, Rufeng Xu & Guoyong Zhao. (2016) Experimental Investigation on Sialon Ceramic Inserts for Ultra-high-speed Milling of Inconel 718. Materials and Manufacturing Processes 31:5, pages 633-640.
Read now
Read now
Waseem Akhtar, Jianfei Sun & Wuyi Chen. (2016) Effect of Machining Parameters on Surface Integrity in High Speed Milling of Super Alloy GH4169/Inconel 718. Materials and Manufacturing Processes 31:5, pages 620-627.
Read now
Read now
L. Li, Z. Y. Li, X. T. Wei & X. Cheng. (2015) Machining Characteristics of Inconel 718 by Sinking-EDM and Wire-EDM. Materials and Manufacturing Processes 30:8, pages 968-973.
Read now
Read now
Xia Ji, Xueping Zhang, Beizhi Li & Steven Y. Liang. (2014) Modeling the Effects of Minimum Quantity Lubrication on Machining Force, Temperature, and Residual Stress. Machining Science and Technology 18:4, pages 547-564.
Read now
Read now
Yulin Wang, Long Li, Changguang Zhou, Qin Guo, Chunjian Zhang & Hutian Feng. (2014) The Dynamic Modeling and Vibration Analysis of the Large-Scale Thread Whirling System Under High-Speed Hard Cutting. Machining Science and Technology 18:4, pages 522-546.
Read now
Read now
Yusuf Kaynak, Tao Lu & I. S. Jawahir. (2014) Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining. Machining Science and Technology 18:2, pages 149-198.
Read now
Read now
Salman Pervaiz, Amir Rashid, Ibrahim Deiab & Mihai Nicolescu. (2014) Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review. Materials and Manufacturing Processes 29:3, pages 219-252.
Read now
Read now
Volodymyr Bushlya, Oleksandr Gutnichenko, Jinming Zhou, Pajazit Avdovic & Jan-Eric Ståhl. (2013) EFFECTS OF CUTTING SPEED WHEN TURNING AGE HARDENED INCONEL 718 WITH PCBN TOOLS OF BINDERLESS AND LOW-CBN GRADES. Machining Science and Technology 17:4, pages 497-523.
Read now
Read now
Manu Dogra & VishalS. Sharma. (2012) Machinability and Surface Quality Issues in Finish Turning of Hardened Steel with Coated Carbide and CBN Tools. Materials and Manufacturing Processes 27:10, pages 1110-1117.
Read now
Read now
Sanjeev Saini, Inderpreet
Singh Ahuja & VishalS. Sharma. (2012) Residual Stresses, Surface Roughness, and Tool Wear in Hard Turning: A Comprehensive Review. Materials and Manufacturing Processes 27:6, pages 583-598.
Read now
Read now
Articles from other publishers (142)
Bo Gao, Yang Liu, Xiangjun Chen, Zimo Han, Xinyu Xu & Zhenbo Wang. (2023) Effects of rare earth addition and service mode on surface integrity evolution of high-end machine tool spindle bearings under service. Journal of Materials Research and Technology 27, pages 2814-2821.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Muhammad Arif Mahmood & Saqib Anwar. (2023) Mathematical modeling and experimental evaluation of superalloy EDM using cryogenically treated electrodes and transformer oil-based dielectrics: a correlation study. The International Journal of Advanced Manufacturing Technology 129:3-4, pages 1649-1663.
Crossref
Crossref
Xiaoming Yin, Shenliang Yang, Xun Li & Deyuan Zhang. (2023) Research on surface integrity of Inconel 718 with various ultrasonic ball-end milling times. The International Journal of Advanced Manufacturing Technology 128:5-6, pages 2187-2197.
Crossref
Crossref
Kai Xue, Peng Chen, Wenbo Liu, Bin Zou, Lei Li, Wei Chen, Xinfeng Wang & Ziyue Xu. (2023) Geometric Structures for Sialon Ceramic Solid End Mills and Its Performance in High-Speed Milling of Nickel-Based Superalloys. Coatings 13:9, pages 1483.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Waqar Muhammad Ashraf, Saqib Anwar & Jaroslaw Krzywanski. (2023) Enhancing EDM Machining Precision through Deep Cryogenically Treated Electrodes and ANN Modelling Approach. Micromachines 14:8, pages 1536.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Umair Waseem, Saqib Anwar, Abdullah Yahia Alfaify & Abdul Wasy Zia. (2023) Surface quality investigation in surfactant-based EDM of Inconel 617 using deep cryogenically treated electrodes. The International Journal of Advanced Manufacturing Technology 127:1-2, pages 861-878.
Crossref
Crossref
Kashif Ishfaq, Muhammad Sana, Muhammad Arif Mahmood, Saqib Anwar & Muhammad Umair Waseem. (2023) Evaluating Surface Quality of Inconel 617 by Employing Deep Cryogenically Treated Electrodes in Surfactant-Added Dielectrics of Transformer Oil. Metals 13:6, pages 1092.
Crossref
Crossref
Renke Kang, Pengnan Zhang, Zhaocheng Wei, Zhigang Dong & Yidan Wang. (2023) Experimental Study on Ultrasonic Assisted Turning of GH4068 Superalloy. Materials 16:9, pages 3554.
Crossref
Crossref
Anu Tomy & Somashekhar S. Hiremath. (2022) An experimental investigation and multi-objective optimization of abrasive jet machining on Ti-6Al-4V ELI bio-material. Journal of Micromanufacturing 6:1, pages 50-59.
Crossref
Crossref
Dinesh Reddy Nallagangula, Abdul Md Mazid, Neamul Khandoker & Mohammad Yeakub Ali. 2023. Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering
359
365
.
Carlos Vinicius Lemes, Anselmo Eduardo Diniz & Victor Rossi Saciotto. (2022) Comparing the performance of several tool coatings in turning of commercially pure titanium grade 4. The International Journal of Advanced Manufacturing Technology 123:5-6, pages 1733-1743.
Crossref
Crossref
Shengsheng Zhang, Guoyu Hu, Jianping Zhou, Lizhong Wang, Yan Xu, Xiangyu Dai, Jiahao Wang & Xinyang Ma. (2022) Research on short electric arc–electrochemical combined machining performance of Ti–6Al–4V alloys using different electrode materials. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:10.
Crossref
Crossref
Monica C.R. Guimaraes, João B. Fogagnolo, Jose M. Paiva, Stephen C. Veldhuis & Anselmo E. Diniz. (2022) Evaluation of milling parameters on the surface integrity of welded inconel 625. Journal of Materials Research and Technology 20, pages 2611-2628.
Crossref
Crossref
Necati Uçak, Adem Çiçek & Kubilay Aslantas. (2022) Machinability of 3D printed metallic materials fabricated by selective laser melting and electron beam melting: A review. Journal of Manufacturing Processes 80, pages 414-457.
Crossref
Crossref
Kejia Zhuang, Shengqiang Zhou, Lingli Zou, Liangliang Lin, Yang Liu, Jian Weng & Jinqiang Gao. (2022) Numerical investigation of sequential cuts residual stress considering tool edge radius in machining of AISI 304 stainless steel. Simulation Modelling Practice and Theory 118, pages 102525.
Crossref
Crossref
Irfan Ullah, Song Zhang & Saad Waqar. (2022) Numerical and experimental investigation on thermo-mechanically induced residual stress in high-speed milling of Ti-6Al-4V alloy. Journal of Manufacturing Processes 76, pages 575-587.
Crossref
Crossref
N. E. ARUN KUMAR, A. SURESH BABU, M. SUBRAMANIAN & C. PRADEEP KUMAR. (2022) INFLUENCE OF WIRE-EDM PARAMETERS ON SURFACE CHARACTERISTICS OF SUPERALLOY MONEL 400. Surface Review and Letters 29:03.
Crossref
Crossref
Zhou Chang & Lai Hu. (2022) Study on scatter of surface integrity of bearing raceway grinding. Manufacturing Technology 21:6, pages 781-787.
Crossref
Crossref
A Palanisamy, N Jeyaprakash, V Sivabharathi & S Sivasankaran. (2021) Effects of dry turning parameters of Incoloy 800H superalloy using Taguchi-based Grey relational analysis and modeling by response surface methodology. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:1, pages 607-623.
Crossref
Crossref
D. Palanisamy, A. Devaraju, K. L. Narasimhamu, N. Manikandan, Ramesh Raju, P. Thejasree & D. Arulkirubakaran. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
39
50
.
Qianbing You, Ji Xiong, Zhixing Guo, Yunliang Huo, Lei Liang & Lu Yang. (2021) Study on coating performance of CVD coated cermet tools for 4340 steel cutting. International Journal of Refractory Metals and Hard Materials 98, pages 105554.
Crossref
Crossref
Huachen Peng, Wencheng Tang, Yan Xing & Xin Zhou. (2021) Semi-Empirical Prediction of Turned Surface Residual Stress for Inconel 718 Grounded in Experiments and Finite Element Simulations. Materials 14:14, pages 3937.
Crossref
Crossref
Xiaoping Ren, Zhanqiang Liu, Xiaoliang Liang & Pengcheng Cui. (2021) Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718. Materials 14:9, pages 2428.
Crossref
Crossref
Emine Şirin, Turgay Kıvak & Çağrı Vakkas Yıldırım. (2021) Effects of mono/hybrid nanofluid strategies and surfactants on machining performance in the drilling of Hastelloy X. Tribology International 157, pages 106894.
Crossref
Crossref
Guisen Wang & Fuzhu Han. (2021) A comparative study on the surface integrity of single-step and multi-step sequential machining in electric discharge machining. The International Journal of Advanced Manufacturing Technology 114:5-6, pages 1803-1817.
Crossref
Crossref
Bingjun Huo, Bo Zhao, Long Yin, Xingchen Guo & Xiaobo Wang. (2021) Effect of double-excitation ultrasonic elliptical vibration turning trajectory on surface morphology. The International Journal of Advanced Manufacturing Technology 113:5-6, pages 1401-1414.
Crossref
Crossref
Yishang Li, Bin Zou, Zhenyu Shi, Chuanzhen Huang, Lei Li, Hanlian Liu, Hongtao Zhu, Peng Yao & Jikai Liu. (2021) Wear patterns and mechanisms of sialon ceramic end-milling tool during high speed machining of nickel-based superalloy. Ceramics International 47:4, pages 5690-5698.
Crossref
Crossref
Avadhoot Rajurkar & Satish Chinchanikar. (2021) Performance study of dimple and channel textured tools during turning of Inconel-718. Materials Today: Proceedings 46, pages 8347-8351.
Crossref
Crossref
Muralidhara Rao, Vijeesh Vijayan, Athul Anil, Prithvi Kumar Rai & Nirmith R. Jain. (2021) Effect of wire electrode discharge machining process parameters on the surface roughness, hardness, and microstructure of the high carbon steels. Materials Today: Proceedings 46, pages 2625-2629.
Crossref
Crossref
Suresh L. Chittewar & Nilesh G. Patil. (2021) Surface integrity of conventional and additively manufactured nickel superalloys: A review. Materials Today: Proceedings 44, pages 701-708.
Crossref
Crossref
D. Palanisamy, N. Manikandan, J.S. Binoj, R. Ramesh & T.D. Shankar Narayana. (2021) Performance comparison of artificial neural network and multiple regression models for wire electrical discharge machining of haste alloy. Materials Today: Proceedings 39, pages 524-532.
Crossref
Crossref
D. Palanisamy, N. Manikandan, R. Ramesh, A. Devaraju & D. ArulKirubakaran. (2021) Development of neural network models for wire electrical discharge machining of Haste alloy. Materials Today: Proceedings 39, pages 438-445.
Crossref
Crossref
N. Manikandan, J.S. Binoj, P. Thejasree, P. Sasikala & P. Anusha. (2021) Application of Taguchi method on Wire Electrical Discharge Machining of Inconel 625. Materials Today: Proceedings 39, pages 121-125.
Crossref
Crossref
P. Thejasree, J. S. Binoj, P. C. Krishnamachary, N. Manikandan & D. Palanisamy. 2021. Advances in Industrial Automation and Smart Manufacturing. Advances in Industrial Automation and Smart Manufacturing
497
504
.
N. Manikandan, J. S. Binoj, K. C. Varaprasad, P. Thejasree & Ramesh Raju. 2021. Advances in Industrial Automation and Smart Manufacturing. Advances in Industrial Automation and Smart Manufacturing
267
274
.
M. Adam Khan & Kapil Gupta. 2021. Intelligent Manufacturing. Intelligent Manufacturing
37
56
.
Julian Uebel, Werner Ankener, Stephan Basten, Marek Smaga, Benjamin Kirsch, Jörg Seewig, Tilmann Beck & Jan C. Aurich. (2020) In-process and ex-situ measurement techniques for the characterization of surface conditions during cryogenic hard turning of AISI 52100. tm - Technisches Messen 87:11, pages 694-703.
Crossref
Crossref
Wei Fan, Wei Ji, Lihui Wang, Lianyu Zheng & Yahui Wang. (2020) A review on cutting tool technology in machining of Ni-based superalloys. The International Journal of Advanced Manufacturing Technology 110:11-12, pages 2863-2879.
Crossref
Crossref
Stefan Dzionk & Mieczysław S. Siemiątkowski. (2020) Studying the Effect of Working Conditions on WEDM Machining Performance of Super Alloy Inconel 617. Machines 8:3, pages 54.
Crossref
Crossref
Shrikant B. Thorat & Sadaiah Mudigonda. (2020) The relative influence of surface metallurgy and self-magnetization induced by different manufacturing processes on surface integrity of Co Cr alloy using PCM. Materials Characterization 167, pages 110526.
Crossref
Crossref
R. Acevedo, P. Sedlak, R. Kolman & M. Fredel. (2020) Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: State of the art review. Journal of Materials Research and Technology 9:4, pages 9457-9477.
Crossref
Crossref
Jinglin Tong, Junshuai Zhao, Peng Chen, Zhiming Zhang & Bo Zhao. (2019) Effect of ultrasonic longitudinal–torsional composite milling of the residual stress on the surface of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:8, pages 1598-1608.
Crossref
Crossref
Harvinder Singh, Vinod Kumar & Jatinder Kapoor. (2020) Effect of WEDM process parameters on machinability of Nimonic75 alloy using brass wire. World Journal of Engineering 17:3, pages 389-397.
Crossref
Crossref
Joona Vaara, Aleksi Kunnari & Tero Frondelius. (2020) Literature review of fatigue assessment methods in residual stressed state. Engineering Failure Analysis 110, pages 104379.
Crossref
Crossref
M Adam Khan & Kapil Gupta. (2020) A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools. Materials Research Express 7:1, pages 016537.
Crossref
Crossref
Harvinder Singh, Vinod Kumar & Jatinder Kapoor. (2020) Modeling of WEDM parameters and surface integrity characteristics in the machining of Nimonic75 alloy. Materials Today: Proceedings 28, pages 1363-1371.
Crossref
Crossref
Sandip Mane & Sanjay Kumar. 2020. Proceedings of International Conference on Intelligent Manufacturing and Automation. Proceedings of International Conference on Intelligent Manufacturing and Automation
177
186
.
Dileep Kumar Ganji & G. Rajyalakshmi. 2020. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering
537
555
.
Pietro Stolf, Jose Mario Paiva, Yassmin Seid Ahmed, Jose Luis Endrino, Saurav Goel & Stephen Clarence Veldhuis. (2019) The role of high-pressure coolant in the wear characteristics of WC-Co tools during the cutting of Ti–6Al–4V. Wear 440-441, pages 203090.
Crossref
Crossref
Mohamed Shnfir, Oluwole A. Olufayo, Walid Jomaa & Victor Songmene. (2019) Machinability Study of Hardened 1045 Steel When Milling with Ceramic Cutting Inserts. Materials 12:23, pages 3974.
Crossref
Crossref
Limin Feng, Guosheng Su, Jin Du, Jingjie Zhang & Baolin Wang. (2019) Effects of cutting fluid with different pressures and jetting paths on machined surface integrity in cutting compacted graphite iron: An experimental study. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:13, pages 2410-2418.
Crossref
Crossref
R A Rashid, M N Murad, R Hamidon & S Shariffuddin. (2019) Effect of metal cutting fluid (MCF) conditions on tool wear and thrust force in drilling Ti-6Al-4V using coated carbide tools. IOP Conference Series: Materials Science and Engineering 670:1, pages 012008.
Crossref
Crossref
Ramai Ranjan Panigrahi, Ramanuj Kumar, Amlana Panda & Ashok Kumar Sahoo. (2019) Optimization and Modeling Approaches in Machining of High Temperature Super Alloy Steels: An Overview. IOP Conference Series: Materials Science and Engineering 653:1, pages 012042.
Crossref
Crossref
Adam Khan M & Kapil Gupta. (2019) Experimental evaluation of surface quality characteristics in laser machining of nickel-based superalloy. Optik 196, pages 163199.
Crossref
Crossref
Weimin Huang, Jun Zhao & Suyu Wang. (2019) Necessity of multidimensional evaluation of the high-speed ball-end milled surface of hardened AISI D2 steel from a wear resistance perspective. The International Journal of Advanced Manufacturing Technology 103:9-12, pages 4085-4093.
Crossref
Crossref
Yusuf KaynakArmin Gharibi. (2019) Cryogenic Machining of Titanium Ti-5553 Alloy. Journal of Manufacturing Science and Engineering 141:4.
Crossref
Crossref
A. PALANISAMY & T. SELVARAJ. (2019) OPTIMIZATION OF TURNING PARAMETERS FOR SURFACE INTEGRITY PROPERTIES ON INCOLOY 800H SUPERALLOY USING CRYOGENICALLY TREATED MULTI-LAYER CVD COATED TOOL. Surface Review and Letters 26:02, pages 1850139.
Crossref
Crossref
Zhonglei Liu, Xuekun Li, Xiaodan Wang, Chenchen Tian & Liping Wang. (2018) Comparative investigation on grindability of Inconel 718 made by selective laser melting (SLM) and casting. The International Journal of Advanced Manufacturing Technology 100:9-12, pages 3155-3166.
Crossref
Crossref
Selim Gürgen, Dinçer Tali & Melih Cemal Kushan. (2019) An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718. Journal of Aerospace Technology and Management.
Crossref
Crossref
Qingzhong Xu, Jun Zhao, Xing Ai, Weimin Huang & Guijie Wang. (2017) Optimum selection of tool materials for machining of high-strength steels based on fuzzy comprehensive evaluation method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:1, pages 145-153.
Crossref
Crossref
Ramesh Rajguru & Hari Vasudevan. 2019. Advances in Forming, Machining and Automation. Advances in Forming, Machining and Automation
505
515
.
Ramesh Rajguru & Hari Vasudevan. 2019. Proceedings of International Conference on Intelligent Manufacturing and Automation. Proceedings of International Conference on Intelligent Manufacturing and Automation
425
432
.
Caixu Yue, Haining Gao, Xianli Liu & Steven Liang. (2018) Part Functionality Alterations Induced by Changes of Surface Integrity in Metal Milling Process: A Review. Applied Sciences 8:12, pages 2550.
Crossref
Crossref
Guang-Jun Liu, Zhao-Cheng Zhou, Xin Qian, Wei-Hai Pang, Guang-Hui Li & Guang-Yu Tan. (2018) Wear Mechanism of Cemented Carbide Tool in High Speed Milling of Stainless Steel. Chinese Journal of Mechanical Engineering 31:1.
Crossref
Crossref
SD Castellanos, AJ Cavaleiro, AMP de Jesus, R Neto & J Lino Alves. (2018) Machinability of titanium aluminides: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442071880938.
Crossref
Crossref
Afzaal Ahmed, M. Tanjilul, A. Fardin, Y. S. Wong, M. Rahman & A. Senthil Kumar. (2018) On the design and application of hybrid electrical discharge and arc machining process for enhancing drilling performance in Inconel 718. The International Journal of Advanced Manufacturing Technology 99:5-8, pages 1825-1837.
Crossref
Crossref
Bing Wang & Zhanqiang Liu. (2018) Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1925-1975.
Crossref
Crossref
Da Qu, Peng Zhang, Jiadai Xue, Yun Fan, Zuhui Chen & Bo Wang. (2018) Experimental Study on the Effects of Coolants on Surface Quality and Mechanical Properties of Micromilled Thin-Walled Elgiloy. Materials 11:9, pages 1497.
Crossref
Crossref
Vetri Velmurugan Kannan & Venkatesan Kannan. A Comparative Study on Machinability Characteristics in Dry Machining of Inconel X-750 Alloy Using Coated Carbide Inserts. A Comparative Study on Machinability Characteristics in Dry Machining of Inconel X-750 Alloy Using Coated Carbide Inserts.
Xiangyu Wang, Chuanzhen Huang, Bin Zou, Guoliang Liu, Hongtao Zhu & Jun Wang. (2017) Experimental study of surface integrity and fatigue life in the face milling of inconel 718. Frontiers of Mechanical Engineering 13:2, pages 243-250.
Crossref
Crossref
Neelesh Kumar Sahu, Atul B. Andhare, Sandip Andhale & Roja Raju Abraham. (2018) Prediction of surface roughness in turning of Ti-6Al-4V using cutting parameters, forces and tool vibration. IOP Conference Series: Materials Science and Engineering 346, pages 012037.
Crossref
Crossref
Jinxuan Bai, Qingshun Bai, Zhen Tong & Guoda Chen. (2017) The influence of cutting parameters on the defect structure of subsurface in orthogonal cutting of titanium alloy. Journal of Materials Research 33:6, pages 720-732.
Crossref
Crossref
Xin-Da Huang, Xiao-Ming Zhang, Jürgen Leopold & Han Ding. (2018) Analytical Model for Prediction of Residual Stress in Dynamic Orthogonal Cutting Process. Journal of Manufacturing Science and Engineering 140:1.
Crossref
Crossref
Simon Isakson, M. Ibrahim Sadik, Amir Malakizadi & Peter Krajnik. (2018) Effect of cryogenic cooling and tool wear on surface integrity of turned Ti-6Al-4V. Procedia CIRP 71, pages 254-259.
Crossref
Crossref
Jianfei Sun, Tianming Wang, Anpeng Su & Wuyi Chen. (2018) Surface integrity and its influence on fatigue life when turning nickel alloy GH4169. Procedia CIRP 71, pages 478-483.
Crossref
Crossref
A. Palanisamy & T. Selvaraj. (2018) Optimization of Machining Parameters for Dry Turning of Incoloy 800H Using Taguchi - Based Grey Relational Analysis. Materials Today: Proceedings 5:2, pages 7708-7715.
Crossref
Crossref
Welber Vasconcelos Leadebal Jr, Anderson Clayton Alves de Melo, Adilson José de Oliveira & Nicolau Apoena Castro. (2018) Effects of cryogenic cooling on the surface integrity in hard turning of AISI D6 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:1.
Crossref
Crossref
Farbod Akhavan Niaki & Laine Mears. (2017) A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy. Journal of Manufacturing Processes 30, pages 268-280.
Crossref
Crossref
Weixing Xu & Liangchi Zhang. (2017) A new approach to characterising the surface integrity of fibre-reinforced polymer composites during cutting. Composites Part A: Applied Science and Manufacturing 103, pages 272-282.
Crossref
Crossref
Jose Mario Paiva, Mohamed Abdul Monim Shalaby, Mohammad Chowdhury, Lev Shuster, Sergey Chertovskikh, Danielle Covelli, Edinei Locks Junior, Pietro Stolf, Amr Elfizy, Carlos Alberto Schuch Bork, German Fox-Rabinovich & Stephen Clarence Veldhuis. (2017) Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy. Coatings 7:11, pages 187.
Crossref
Crossref
F. Wang, Z. Y. Liu, Y. B. Guo, J. Zhao & Z. Q. Liu. (2017) Efficient Multiscale Modeling and Validation of Residual Stress Field in Cutting. Journal of Manufacturing Science and Engineering 139:9.
Crossref
Crossref
Palanisamy Angappan, Selvaraj Thangiah & Sivasankaran Subbarayan. (2017) Taguchi-based grey relational analysis for modeling and optimizing machining parameters through dry turning of Incoloy 800H. Journal of Mechanical Science and Technology 31:9, pages 4159-4165.
Crossref
Crossref
Akhtar Khan & Kalipada Maity. (2017) Comparative study of some machinability aspects in turning of pure titanium with untreated and cryogenically treated carbide inserts. Journal of Manufacturing Processes 28, pages 272-284.
Crossref
Crossref
Aziz UI Hassan Mohsan, Zhanqiang Liu & G. K. Padhy. (2016) A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions. The International Journal of Advanced Manufacturing Technology 91:1-4, pages 107-125.
Crossref
Crossref
Yong Feng Fang & Kong Fah Tee. (2017) Effects on Surface Integrity of Ti6Al4V in High Speed Milling. Key Engineering Materials 737, pages 156-161.
Crossref
Crossref
Qingzhong Xu, Jun Zhao & Xing Ai. (2017) Fabrication and cutting performance of Ti(C,N)-based cermet tools used for machining of high-strength steels. Ceramics International 43:8, pages 6286-6294.
Crossref
Crossref
Yan Wang, Duxing He, Lin Yang & Wei Xiong. (2017) Formation mechanism of surface topography in low-speed wire electrical discharge machining Inconel 718 and its on-line prediction based on acoustic emission technology. Advances in Mechanical Engineering 9:4, pages 168781401769457.
Crossref
Crossref
Yongjie Ma & Guang Cheng. (2017) Forming property and broaching error prediction of a forged nickel-based superalloy turbine disc. Aerospace Science and Technology 62, pages 55-64.
Crossref
Crossref
Mohammadreza Shabgard, Saeid Farzaneh & Ahad Gholipoor. (2016) Investigation of the surface integrity characteristics in wire electrical discharge machining of Inconel 617. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:3, pages 857-864.
Crossref
Crossref
Ruihu Zhou & Wenyu Yang. (2016) Analytical modeling of residual stress in helical end milling of nickel-aluminum bronze. The International Journal of Advanced Manufacturing Technology 89:1-4, pages 987-996.
Crossref
Crossref
A. Moufki, G. Le Coz & D. Dudzinski. (2017) End-milling of Inconel 718 Superalloy - An Analytical Modelling. Procedia CIRP 58, pages 358-363.
Crossref
Crossref
Iwona Wstawska & Krzysztof Ślimak. (2016) The influence of cooling techniques on cutting forces and surface roughness during cryogenic machining of titanium alloys. Archives of Mechanical Technology and Materials 36:1, pages 12-17.
Crossref
Crossref
Ian C. Garretson, Mahesh Mani, Swee Leong, Kevin W. Lyons & Karl R. Haapala. (2016) Terminology to support manufacturing process characterization and assessment for sustainable production. Journal of Cleaner Production 139, pages 986-1000.
Crossref
Crossref
C. J. Li, Y. Li, H. Tong, L. Zhao, Q. C. Kong & Z. Q. Wang. (2016) An EDM pulse power generator and its feasible experiments for drilling film cooling holes. The International Journal of Advanced Manufacturing Technology 87:5-8, pages 1813-1821.
Crossref
Crossref
Xin-Da Huang, Xiao-Ming Zhang & Han Ding. (2016) A novel relaxation-free analytical method for prediction of residual stress induced by mechanical load during orthogonal machining. International Journal of Mechanical Sciences 115-116, pages 299-309.
Crossref
Crossref
N.E. Karkalos, N.I. Galanis & A.P. Markopoulos. (2016) Surface roughness prediction for the milling of Ti–6Al–4V ELI alloy with the use of statistical and soft computing techniques. Measurement 90, pages 25-35.
Crossref
Crossref
Zhiyang Huang, Shaojie He, Zhuang Kejia, Xiaoming Zhang & Han Ding. (2016) An Analysis of Cutting Parameters, Coated Materials and Nose Radii on Residual Stresses When Turning Inconel 718. Procedia CIRP 46, pages 368-371.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
Crossref
Xun Li, Shuang Ma & Fanjun Meng. (2015) Surface integrity of GH4169 affected by cantilever finish grinding and the application in aero-engine blades. Chinese Journal of Aeronautics 28:5, pages 1539-1545.
Crossref
Crossref
J.B. Saedon, S.L. Soo, D.K. Aspinwall, A. Barnacle & N.H. Mohamad Nor. (2015) Surface Integrity in Micromilling of Hardened AISI D2 Tool Steel. Applied Mechanics and Materials 789-790, pages 151-155.
Crossref
Crossref
M. Manohar, K. Jayakumar, Roy M. Cherian & Koshy M. George. (2015) Experimental Study on the Machinability of Inconel 718 Alloy Using Coated Carbide Tool. Applied Mechanics and Materials 787, pages 448-453.
Crossref
Crossref
Li Xun, Meng Fanjun, Cui Wei & Ma Shuang. (2015) The CNC grinding of integrated impeller with electroplated CBN wheel. The International Journal of Advanced Manufacturing Technology 79:5-8, pages 1353-1361.
Crossref
Crossref
Quanren Zeng, Geng Liu, Lan Liu & Yi Qin. (2014) Investigation into grindability of a superalloy and effects of grinding parameters on its surface integrity. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 229:2, pages 238-250.
Crossref
Crossref
Abram Pleta, Durul Ulutan & Laine Mears. (2015) An Investigation of Alternative Path Planning Strategies for Machining of Nickel-Based Superalloys. Procedia Manufacturing 1, pages 556-566.
Crossref
Crossref
Xinda Huang, Xiaoming Zhang & Han Ding. (2015) An Analytical Model of Residual Stress for Flank Milling of Ti-6Al-4V. Procedia CIRP 31, pages 287-292.
Crossref
Crossref
Rodrigo Panosso Zeilmann, Fernando Moreira Bordin & Tiago Vacaro. (2014) Surface integrity of electrodischarge machined cavities for different depths and radii. Journal of the Brazilian Society of Mechanical Sciences and Engineering 37:1, pages 93-104.
Crossref
Crossref
P. Sivaprakasam, P. Hariharan & S. Gowri. (2014) Modeling and analysis of micro-WEDM process of titanium alloy (Ti–6Al–4V) using response surface approach. Engineering Science and Technology, an International Journal 17:4, pages 227-235.
Crossref
Crossref
Bogdan Chirita & Nicolae Catalin Tampu. (2014) Study of Residual Stresses Distribution Generated from Milling of Magnesium Alloy Parts. Applied Mechanics and Materials 657, pages 18-22.
Crossref
Crossref
L. Li, X.T. Wei & Z.Y. Li. (2014) Surface integrity evolution and machining efficiency analysis of W-EDM of nickel-based alloy. Applied Surface Science 313, pages 138-143.
Crossref
Crossref
A. Sequera, C. H. Fu, Y. B. Guo & X. T. Wei. (2014) Surface Integrity of Inconel 718 by Ball Burnishing. Journal of Materials Engineering and Performance 23:9, pages 3347-3353.
Crossref
Crossref
L. Li, X. T. Wei, Y. B. Guo, W. Li & J. F. Liu. (2014) Surface Integrity of Inconel 718 by Wire-EDM at Different Energy Modes. Journal of Materials Engineering and Performance 23:8, pages 3051-3057.
Crossref
Crossref
Esmaeil Ghadiri Zahrani & Ali Sedghi. (2014) Experimental investigation of precision turning of Monel K-500 under dry conditions. The International Journal of Advanced Manufacturing Technology 73:9-12, pages 1265-1272.
Crossref
Crossref
K. Kamdani, Sulaiman HasanMohd Amri Lajis. (2014) The Effects of TiAlN and TiN Coating during End Milling of INCONEL 718. Applied Mechanics and Materials 564, pages 566-571.
Crossref
Crossref
Fuzeng Wang, Jun Zhao, Anhai Li, Ningbo Zhu & Jiabang Zhao. (2013) Three-dimensional finite element modeling of high-speed end milling operations of Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:6, pages 893-902.
Crossref
Crossref
Sajjad Kolahdouz, Behrooz Arezoo & Mostafa Hadi. (2014) Surface integrity in high-speed milling of gamma titanium aluminide under MQL cutting conditions. Surface integrity in high-speed milling of gamma titanium aluminide under MQL cutting conditions.
Yusuf Kaynak. (2014) Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining. The International Journal of Advanced Manufacturing Technology 72:5-8, pages 919-933.
Crossref
Crossref
A. Madariaga, J. A. Esnaola, E. Fernandez, P. J. Arrazola, A. Garay & F. Morel. (2014) Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools. The International Journal of Advanced Manufacturing Technology 71:9-12, pages 1587-1598.
Crossref
Crossref
Jin Du, zhanqiang Liu & Shaoyu Lv. (2014) Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy. Applied Surface Science 292, pages 197-203.
Crossref
Crossref
Jinming Zhou, Volodymyr Bushlya, Ru Lin Peng, Zhe Chen, Sten Johansson & Jan Eric Stahl. (2014) Analysis of Subsurface Microstructure and Residual Stresses in Machined Inconel 718 with PCBN and Al2O3-SiCw Tools. Procedia CIRP 13, pages 150-155.
Crossref
Crossref
Piotr Niesłony, Wit Grzesik, Piotr Laskowski & Jan Sienawski. (2014) Numerical and Experimental Analysis of Residual Stresses Generated in the Machining of Ti6Al4V Titanium Alloy. Procedia CIRP 13, pages 78-83.
Crossref
Crossref
W. Li, Y.B. Guo, M.E. Barkey & J.B. Jordon. (2014) Effect Tool Wear During End Milling on the Surface Integrity and Fatigue Life of Inconel 718. Procedia CIRP 14, pages 546-551.
Crossref
Crossref
Laurent Tapie, Bernardin Mawussi, Walter Rubio & Benoît Furet. (2013) Machining of complex-shaped parts with guidance curves. The International Journal of Advanced Manufacturing Technology 69:5-8, pages 1499-1509.
Crossref
Crossref
M. Sayuti, Ahmed A.D. Sarhan & S. Salem. (2013) Development of SiO<sub>2</sub> Nanolubrication System for Better Surface Quality, more Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140. Advanced Materials Research 748, pages 56-60.
Crossref
Crossref
W. Li, H. M. Singh & Y. B. Guo. (2012) An online optical system for inspecting tool condition in milling of H13 tool steel and IN 718 alloy. The International Journal of Advanced Manufacturing Technology 67:5-8, pages 1067-1077.
Crossref
Crossref
Ahmet Hasçalık & Mustafa Ay. (2013) CO2 laser cut quality of Inconel 718 nickel – based superalloy. Optics & Laser Technology 48, pages 554-564.
Crossref
Crossref
C. Ezilarasan, V. S. Senthil kumar & A. Velayudham. (2012) Effect of Machining Parameters on Surface Integrity in Machining Nimonic C-263 Super Alloy Using Whisker-Reinforced Ceramic Insert. Journal of Materials Engineering and Performance 22:6, pages 1619-1628.
Crossref
Crossref
C. F. Yao, Q. C. Jin, X. C. Huang, D. X. Wu, J. X. Ren & D. H. Zhang. (2012) Research on surface integrity of grinding Inconel718. The International Journal of Advanced Manufacturing Technology 65:5-8, pages 1019-1030.
Crossref
Crossref
Sanjeev Saini, Inderpreet Singh Ahuja & Vishal S. Sharma. (2012) Modelling the effects of cutting parameters on residual stresses in hard turning of AISI H11 tool steel. The International Journal of Advanced Manufacturing Technology 65:5-8, pages 667-678.
Crossref
Crossref
R Suresh, S Basavarajappa, Vinayak N Gaitonde, GL Samuel & J Paulo Davim. (2013) State-of-the-art research in machinability of hardened steels. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:2, pages 191-209.
Crossref
Crossref
Antonio Del Prete, Luigino Filice & Domenico Umbrello. (2013) Numerical Simulation of Machining Nickel-Based Alloys. Procedia CIRP 8, pages 540-545.
Crossref
Crossref
L. Li, Y.B. Guo, X.T. Wei & W. Li. (2013) Surface Integrity Characteristics in Wire-EDM of Inconel 718 at Different Discharge Energy. Procedia CIRP 6, pages 220-225.
Crossref
Crossref
S. Zhang, W. Li & Y. B. Guo. (2012) Process design space for optimal surface integrity in finish hard milling of tool steel. Production Engineering 6:4-5, pages 355-365.
Crossref
Crossref
Jin Du & Zhan Qiang Liu. (2012) Influence of Tool Flank Wear on Surface Integrity in Orthogonal Milling of Powder Metallurgy Superalloy. Materials Science Forum 723, pages 182-187.
Crossref
Crossref
Du Jin & Zhanqiang Liu. (2011) Effect of cutting speed on surface integrity and chip morphology in high-speed machining of PM nickel-based superalloy FGH95. The International Journal of Advanced Manufacturing Technology 60:9-12, pages 893-899.
Crossref
Crossref
M Dogra, V Sharma, A Sachdeva & NM Suri. (2011) Tool life and surface integrity issues in continuous and interrupted finish hard turning with coated carbide and CBN tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226:3, pages 431-444.
Crossref
Crossref
Domenico Umbrello, Serafino Caruso & Giovanna Rotella. (2012) Hardness-Based Flow Stress for Numerical Simulation of Machining Inconel 718 Alloy. Key Engineering Materials 504-506, pages 1287-1292.
Crossref
Crossref
Manu Dogra, Vishal S. Sharma, Anish Sachdeva, Narinder Mohan Suri & Jasminder S. Dureja. (2011) Performance evaluation of CBN, coated carbide, cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel. The International Journal of Advanced Manufacturing Technology 57:5-8, pages 541-553.
Crossref
Crossref
Sanjeev Saini, Inderpreet Singh Ahuja & Vishal S. Sharma. (2011) The Effect of Cutting Parameters on Surface Integrity in Hard Turning. Applied Mechanics and Materials 110-116, pages 751-757.
Crossref
Crossref
A. Devillez, G. Le Coz, S. Dominiak & D. Dudzinski. (2011) Dry machining of Inconel 718, workpiece surface integrity. Journal of Materials Processing Technology 211:10, pages 1590-1598.
Crossref
Crossref
Durul Ulutan, Mohammad Sima & Tugrul Özel. (2011) Prediction of Machining Induced Surface Integrity Using Elastic-Viscoplastic Simulations and Temperature-Dependent Flow Softening Material Models in Titanium and Nickel-Based Alloys. Advanced Materials Research 223, pages 401-410.
Crossref
Crossref
Durul Ulutan & Tugrul Ozel. (2011) Machining induced surface integrity in titanium and nickel alloys: A review. International Journal of Machine Tools and Manufacture 51:3, pages 250-280.
Crossref
Crossref
I.S. Jawahir, E. Brinksmeier, R. M'Saoubi, D.K. Aspinwall, J.C. Outeiro, D. Meyer, D. Umbrello & A.D. Jayal. (2011) Surface integrity in material removal processes: Recent advances. CIRP Annals 60:2, pages 603-626.
Crossref
Crossref