Advanced search
Publication Cover
Philosophical Magazine Volume 83, 2003 - Issue 22
Submit an article Journal homepage
481
Views
113
CrossRef citations to date
0
Altmetric
Original Articles

The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal

C. A. Schuh Massachusetts Institute of Technology, Cambridge, Massachusetts, 02139, USA
,
A. S. Argon Massachusetts Institute of Technology, Cambridge, Massachusetts, 02139, USA
,
T. G. Nieh Lawrence Livermore National Laboratory, Livermore, California, 94550, USA
&
J. Wadsworth Battelle Memorial Institute, Columbus, Ohio, 43201, USA
Pages 2585-2597 | Published online: 15 Nov 2010

Citations (113)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

W H Jiang, F Jiang, F X Liu, Y D Wang, H M Dang, F Q Yang, H Choo & P K Liaw. (2012) Mechanical behaviours of workhardening and worksoftening bulk metallic glasses. Materials Science and Technology 28:2, pages 249-255.
Read now
Xu Huang, Jiri Nohava, Bin Zhang & A.G. Ramirez. (2011) Nanoindentation of NiTi shape memory thin films at elevated temperatures. International Journal of Smart and Nano Materials 2:1, pages 39-49.
Read now
Dinesh Kumar Misra, Sung Woo Sohn, Won Tae Kim & Do Hyang Kim. (2008) Rate-dependent serrated flow and plastic deformation in Ti45Zr16Be20Cu10Ni9 bulk amorphous alloy during nanoindentation. Science and Technology of Advanced Materials 9:4.
Read now
B. Moser, J. F. Löffler & J. Michler. (2006) Discrete deformation in amorphous metals: an SEM indentation study. Philosophical Magazine 86:33-35, pages 5715-5728.
Read now
H. W. Zhang, G. Subhash, X. N. Jing, L. J. Kecskes & R. J. Dowding. (2006) Evaluation of hardness–yield strength relationships for bulk metallic glasses. Philosophical Magazine Letters 86:5, pages 333-345.
Read now

Articles from other publishers (108)

Adnan Fareed, Julian M. Rosalie, Sourabh Kumar, Satyakam Kar, Tilmann Hickel, Sebastian Fähler & Robert Maaß. (2023) Constrained incipient phase transformation in Ni-Mn-Ga films: A small-scale design challenge. Materials & Design 233, pages 112259.
Crossref
Keke Meng, Shanglan Jing, Guangxin Geng & Xin Tan. (2023) Microstructure and strain rate dependences of plastic deformation in diamond-like carbon films during nanoindentation. Journal of Non-Crystalline Solids 616, pages 122467.
Crossref
Nengbin Hua, Shuaishuai Wan, Zhenlong Liao, Dehu Geng, Zhongya Qian & Jinyang Wang. (2023) The effects of normal load on the dry-sliding, micro-scratch and nanoindentation behaviors of the Zr-based bulk glassy alloys. Journal of Non-Crystalline Solids 615, pages 122427.
Crossref
J.C. Stinville, M.A. Charpagne, R. Maaß, H. Proudhon, W. Ludwig, P.G. Callahan, F. Wang, I.J. BeyerleinM.P. EchlinT.M. Pollock. (2023) Insights into Plastic Localization by Crystallographic Slip from Emerging Experimental and Numerical Approaches. Annual Review of Materials Research 53:1, pages 275-317.
Crossref
Mitsutoshi Kuroda. (2023) Characteristic material behaviors in conical indentation with friction. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik.
Crossref
Yuexin Chu, Guishen Zhou, Shaoshan Wan, Yue Zhang, Fuyu Dong, Xiaoguang Yuan, Binbin Wang, Liangshun Luo, Yanqing Su, Weidong Li & Peter K. Liaw. (2023) Shear transformation zones and serrated flow dynamics of metallic glasses revealed by nanoindentation. Journal of Alloys and Compounds 936, pages 168165.
Crossref
Yuexin Chu, Guishen Zhou, Yue Zhang, Fuyu Dong, Xiaoguang Yuan, Binbin Wang, Liangshun Luo, Yanqing Su, Weidong Li & Peter K. Liaw. (2022) Effect of nanoindentation experimental parameters on the estimation of the plastic events in metallic glasses employing various analysis methods. Intermetallics 151, pages 107748.
Crossref
Changshan Zhou, Hezhi Zhang, Xudong Yuan, Kaikai Song & Dan Liu. (2022) Applicability of Pre-Plastic Deformation Method for Improving Mechanical Properties of Bulk Metallic Glasses. Materials 15:21, pages 7574.
Crossref
M S Z Zhao, Z L Long & L Peng. (2021) Investigation on the serrated flow behavior of bulk metallic glasses based on machine learning. Materials Research Express 8:9, pages 095202.
Crossref
Anh-Son Tran. (2021) Control of plastic deformation in Cu 50 Ta 50 metallic glass by insertion of Cu crystalline cores . Physica Scripta 96:6, pages 065402.
Crossref
F. Khodabakhshi, A.P. Gerlich, D. Verma, M. Nosko & M. Haghshenas. (2021) Small-scale plasticity of ultra-fine grained alloy and nanostructured nanocomposite: Ambient and elevated-temperature nanoindentation. Materials Science and Engineering: A 807, pages 140873.
Crossref
Russell A. Rowe, Ali Tajyar, Michael Munther, Kurt E. Johanns, Paul G. Allison, Kasra Momeni & Keivan Davami. (2021) Nanoscale serration characteristics of additively manufactured superalloys. Journal of Alloys and Compounds 854, pages 156723.
Crossref
Y. Ikeda, J. Mancias, B. Gan & R. Maaß. (2021) Evidence of room-temperature shear-deformation in a Cu-Al intermetallic. Scripta Materialia 190, pages 126-130.
Crossref
Morgan R. Jones, Andrew B. Kustas, Ping Lu, Michael Chandross & Nicolas Argibay. (2020) Environment-Dependent Tribological Properties of Bulk Metallic Glasses. Tribology Letters 68:4.
Crossref
R. Maaß. (2020) Beyond Serrated Flow in Bulk Metallic Glasses: What Comes Next?. Metallurgical and Materials Transactions A 51:11, pages 5597-5605.
Crossref
Ran-ran He, Ming-fei Li, Babafemi Malomo & Liang Yang. (2020) Enhancing corrosion and mechanical properties of 304 stainless steel by depositing and annealing Zr75Cu25 thin-film metallic glass. Surface and Coatings Technology 400, pages 126221.
Crossref
Qiaoling Chu, Shuai Xu, Xiaofei Zhu, Zhengwang Zhu, Haifeng Zhang, Ruixiang Bai, Zhenkun Lei & Cheng Yan. (2019) Effects of testing conditions on the deformation behaviour of a Ti-based bulk metallic glass. Materials Science and Engineering: A 766, pages 138404.
Crossref
Abdur Rauf, Yini Fang, Hanxin Zhang, Guo Peng & Tao Feng. (2019) Thickness effects on microstructure, mechanical and soft magnetic properties of sputtered Fe Zr thin film metallic glass. Journal of Non-Crystalline Solids 521, pages 119500.
Crossref
M Imani, M H Enayati & A K Basak. (2019) A novel approach for mechanical alloying amorphisation in magnetic Fe–Co alloy system. Materials Research Express 6:7, pages 076575.
Crossref
Qing Zhou, Yin Du, Weichao Han, Yue Ren, Haimin Zhai & Haifeng Wang. (2019) Identifying the origin of strain rate sensitivity in a high entropy bulk metallic glass. Scripta Materialia 164, pages 121-125.
Crossref
H.Y. Cheng, S.H. Chen, Y.Q. Qin, S.D. Feng, K.C. Chan & Y.C. Wu. (2019) On the variation of the mechanical energy accumulation rates during the flow serrations of a Zr-based bulk metallic glass. Journal of Non-Crystalline Solids 508, pages 1-6.
Crossref
Shunhua Chen, Jingyuan Wang, Lei Xia & Yucheng Wu. (2019) Deformation Behavior of Bulk Metallic Glasses and High Entropy Alloys under Complex Stress Fields: A Review. Entropy 21:1, pages 54.
Crossref
H.H. Tang, Y.C. Cai, Q. Zuo, S.H. Chen & R.P. Liu. (2018) Achieving high uniformity of the elastic strain energy accumulation rate during the serrated plastic flows of bulk metallic glasses. Materials Science and Engineering: A 736, pages 269-275.
Crossref
Yuanli Xu & Bo Shi. (2018) Effects of strain and strain rate on the evolution of shear bands for room temperature rolled Pd 40 Ni 40 P 20 bulk metallic glass. Journal of Non-Crystalline Solids 485, pages 74-81.
Crossref
Shaofan Zhao, Haibin Wang, Jialun Gu, Nan Guo, Ling Shao, Yingqi Zhang, Kefu Yao & Na Chen. (2018) High strain rate sensitivity of hardness in Ti-Zr-Hf-Be-(Cu/Ni) high entropy bulk metallic glasses. Journal of Alloys and Compounds 742, pages 312-317.
Crossref
Shaofan Zhao, Haibin Wang, Lin Xiao, Nan Guo, Delin Zhao, Kefu Yao & Na Chen. (2017) High strain rate sensitivity of hardness in quinary Ti-Zr-Hf-Cu-Ni high entropy metallic glass thin films. Physica E: Low-dimensional Systems and Nanostructures 94, pages 100-105.
Crossref
Guangkai Liao, Zhilin Long, Mingshengzi Zhao, Min Zhong, Wei Liu & Wei Chai. (2017) Serrated flow behavior in a Pd-based bulk metallic glass under nanoindentation. Journal of Non-Crystalline Solids 460, pages 47-53.
Crossref
J. Q. Wang & J. H. Perepezko. (2016) Focus: Nucleation kinetics of shear bands in metallic glass. The Journal of Chemical Physics 145:21.
Crossref
Z. Fan, S. Xue, J. Wang, K.Y. Yu, H. Wang & X. Zhang. (2016) Unusual size dependent strengthening mechanisms of Cu/amorphous CuNb multilayers. Acta Materialia 120, pages 327-336.
Crossref
S.H. Chen, T.M. Yue, C.P. Tsui & K.C. Chan. (2016) Effect of external disturbances on the strain-rate dependent plastic deformation behavior of a bulk metallic glass. Materials Science and Engineering: A 669, pages 103-109.
Crossref
Y. M. Lu, B. A. Sun, L. Z. Zhao, W. H. Wang, M. X. Pan, C. T. Liu & Y. Yang. (2016) Shear-banding Induced Indentation Size Effect in Metallic Glasses. Scientific Reports 6:1.
Crossref
V. G. Tkachenko. (2016) Basic Physics of Long-Term Strength of Solid Solutions with Various Kinetics of Mobile Defects. Uspehi Fiziki Metallov 17:2, pages 173-200.
Crossref
Matthew B. Harris, Lars S. Watts & Eric R. Homer. (2016) Competition between shear band nucleation and propagation across rate-dependent flow transitions in a model metallic glass. Acta Materialia 111, pages 273-282.
Crossref
Gaurav Singh, R. L. Narayan, A. M. Asiri & U. Ramamurty. (2016) Discrete drops in the electrical contact resistance during nanoindentation of a bulk metallic glass. Applied Physics Letters 108:18.
Crossref
Liang Wang, Lu Wang, Yunfei Xue, Haifeng Zhang & Huameng Fu. (2015) Nanoindentation response of laser shock peened Ti-based bulk metallic glass. AIP Advances 5:5.
Crossref
Jun Yi, Wei Hua Wang & John J. Lewandowski. (2015) Sample size and preparation effects on the tensile ductility of Pd-based metallic glass nanowires. Acta Materialia 87, pages 1-7.
Crossref
S. Nachum & A.L. Greer. (2014) Indentation size effect in metallic glasses: Mean pressure at the initiation of plastic flow. Journal of Alloys and Compounds 615, pages S98-S101.
Crossref
D.V. Louzguine-Luzgin, S.V. Ketov, Z. Wang, M.J. Miyama, A.A. Tsarkov & A.Yu. Churyumov. (2014) Plastic deformation studies of Zr-based bulk metallic glassy samples with a low aspect ratio. Materials Science and Engineering: A 616, pages 288-296.
Crossref
Fabian Haag, Denise Beitelschmidt, Jürgen Eckert & Karsten Durst. (2014) Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – A nanoindentation and atomic force microscopy study. Acta Materialia 70, pages 188-197.
Crossref
John H. PerepezkoSeth D. ImhoffMing-Wei Chen, Jun-Qiang Wang & Sergio Gonzalez. (2014) Nucleation of shear bands in amorphous alloys. Proceedings of the National Academy of Sciences 111:11, pages 3938-3942.
Crossref
L. Cheng, Z. M. Jiao, S. G. Ma, J. W. Qiao & Z. H. Wang. (2014) Serrated flow behaviors of a Zr-based bulk metallic glass by nanoindentation. Journal of Applied Physics 115:8, pages 084907.
Crossref
A. S. Argon. 2013. The Physics of Deformation and Fracture of Polymers. The Physics of Deformation and Fracture of Polymers 174 227 .
Haiyan Ye, Tao Zhang, Zhihua Wang, Hefeng Zhou, Shengbo Sang, Huijun Yang & Junwei Qiao. (2013) Dynamic Compressive Deformation and Fracture of a Hollow Bulk Metallic Glass. Open Journal of Metal 03:03, pages 50-55.
Crossref
A. Iost. (2013) Détermination de la ténacité de matériaux fragiles ou ductiles à partir de l’essai d’indentation. Revue de Métallurgie 110:3, pages 215-233.
Crossref
S. González, E. Pellicer, S. Suriñach, M.D. Baró & J. Sort. (2012) Mechanical and corrosion behaviour of as-cast and annealed Zr60Cu20Al10Fe5Ti5 bulk metallic glass. Intermetallics 28, pages 149-155.
Crossref
J.M. Wheeler, R. Raghavan & J. Michler. (2012) Temperature invariant flow stress during microcompression of a Zr-based bulk metallic glass. Scripta Materialia 67:2, pages 125-128.
Crossref
P. Yiu, J.S.C. Jang, S.Y. Chang, Y.C. Chen, J.P. Chu & C.H. Hsueh. (2012) Plasticity enhancement of Zr-based bulk metallic glasses by direct current electropulsing. Journal of Alloys and Compounds 525, pages 68-72.
Crossref
Yunfei Xue, Lu Wang, Xingwang Cheng, Fuchi Wang, Huanwu Cheng, Haifeng Zhang & Aiming Wang. (2012) Strain rate dependent plastic mutation in a bulk metallic glass under compression. Materials & Design (1980-2015) 36, pages 284-288.
Crossref
R. Raghavan, B. Kombaiah, M. Döbeli, R. Erni, U. Ramamurty & J. Michler. (2012) Nanoindentation response of an ion irradiated Zr-based bulk metallic glass. Materials Science and Engineering: A 532, pages 407-413.
Crossref
Xu Huang & Ainissa G. Ramirez. (2011) Crystal orientation effects on the onset of plasticity in single-crystal NiTi. Scripta Materialia 65:10, pages 879-882.
Crossref
A. Rezaee-Bazzaz, M. Marvi-Mashhadi & M. Haddad-Sabzevar. (2011) Study of mechanical deformation of Zr55Cu30Al10Ni5 bulk metallic glass through instrumented indentation. Materials Science and Engineering: A 528:21, pages 6630-6635.
Crossref
R. Maaß, D. Klaumünzer & J.F. Löffler. (2011) Propagation dynamics of individual shear bands during inhomogeneous flow in a Zr-based bulk metallic glass. Acta Materialia 59:8, pages 3205-3213.
Crossref
Xu Huang, J. San Juan & A.G. Ramirez. (2010) Evolution of phase transformation behavior and mechanical properties with crystallization in NiTi thin films. Scripta Materialia 63:1, pages 16-19.
Crossref
R. Varadarajan & J. J. Lewandowski. (2010) Stress-State Effects on the Fracture of a Zr-Ti-Ni-Cu-Be Bulk Amorphous Alloy. Metallurgical and Materials Transactions A 41:7, pages 1758-1766.
Crossref
Abhishek Chatterjee, Andreas A. Polycarpou, John R. Abelson & Pascal Bellon. (2010) Nanoscratch study of hard HfB2 thin films using experimental and finite element techniques. Wear 268:5-6, pages 677-685.
Crossref
K.Y. Ng, L. Zuo & A.H.W. Ngan. (2009) Steady-state serrated deformation of metallic glass during indentation. Scripta Materialia 61:10, pages 955-958.
Crossref
Xu Huang & A. G. Ramirez. (2009) Structural relaxation and crystallization of NiTi thin film metallic glasses. Applied Physics Letters 95:12.
Crossref
M.Q. Jiang, S.Y. Jiang, Z. Ling & L.H. Dai. (2009) Smaller Deborah number inducing more serrated plastic flow of metallic glass. Computational Materials Science 46:3, pages 767-771.
Crossref
Haowen Xie, Yuncang Li, Dengke Yang, Peter Hodgson & Cui’e Wen. (2009) Plastic deformation in the annealed Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under indenter. Journal of Alloys and Compounds 475:1-2, pages 501-505.
Crossref
N. Li, L. Liu, K.C. Chan, Q. Chen & J. Pan. (2009) Deformation behavior and indentation size effect of Au49Ag5.5Pd2.3Cu26.9Si16.3 bulk metallic glass at elevated temperatures. Intermetallics 17:4, pages 227-230.
Crossref
J. Sort, J. Fornell, W. Li, S. Suriñach & M.D. Baró. (2011) Influence of the loading rate on the indentation response of Ti-based metallic glass. Journal of Materials Research 24:3, pages 918-925.
Crossref
SY Jiang, MQ Jiang, LH Dai & YG Yao. (2008) Atomistic Origin of Rate-Dependent Serrated Plastic Flow in Metallic Glasses. Nanoscale Research Letters 3:12.
Crossref
W.H. Jiang, F.X. Liu, H.H. Liao, H. Choo, P.K. Liaw, B.J. Edwards & B. Khomami. (2011) Temperature increases caused by shear banding in as-cast and relaxed Zr-based bulk metallic glasses under compression. Journal of Materials Research 23:11, pages 2967-2974.
Crossref
W. H. Jiang, F. X. Liu, D. C. Qiao, H. Choo, P. K. Liaw, R. Li & T. Zhang. (2008) Effects of Temperatures on Inhomogeneous Plastic Flows of a Bulk‐Metallic Glass. Advanced Engineering Materials 10:11, pages 1016-1019.
Crossref
L.A. Deibler & K.O. Findley. (2008) Characterization of an amorphous–crystalline Mg-based composite. Journal of Alloys and Compounds 463:1-2, pages 173-179.
Crossref
W.H. Jiang, H.H. Liao, F.X. Liu, H. Choo & P.K. Liaw. (2007) Rate-Dependent Temperature Increases in Shear Bands of a Bulk-Metallic Glass. Metallurgical and Materials Transactions A 39:8, pages 1822-1830.
Crossref
S.X. Song, J.S.C. Jang & T.G. Nieh. (2008) Analyses of shear band emission in a Mg-based bulk metallic glass deformed at different nanoindentation rates. Intermetallics 16:5, pages 676-681.
Crossref
V Keryvin, R Crosnier, R Laniel, V H Hoang & J-C Sanglebœuf. (2008) Indentation and scratching mechanisms of a ZrCuAlNi bulk metallic glass. Journal of Physics D: Applied Physics 41:7, pages 074029.
Crossref
L. Wang, S. X. Song & T. G. Nieh. (2008) Assessing plastic shear resistance of bulk metallic glasses under nanoindentation. Applied Physics Letters 92:10.
Crossref
T. G. Nieh. 2008. Bulk Metallic Glasses. Bulk Metallic Glasses 147 167 .
W.H. Jiang, F.X. Liu, F. Jiang, K.Q. Qiu, H. Choo & P.K. Liaw. (2011) Strain-rate dependence of hardening and softening in compression of a bulk-metallic glass. Journal of Materials Research 22:10, pages 2655-2658.
Crossref
Q.K. Jiang, X.P. Nie, J.Z. Jiang, N. Deyneka-Dupriez & H.-J. Fecht. (2007) Room-temperature nanoindentation measurements of La-based bulk metallic glass. Scripta Materialia 57:2, pages 149-152.
Crossref
Carl Koch, Ilya Ovid'ko, Sudipta Seal & Stan Veprek. 2009. Structural Nanocrystalline Materials. Structural Nanocrystalline Materials 134 203 .
Jae-il Jang, Byung-Gil Yoo & Ju-Young Kim. (2007) Rate-dependent inhomogeneous-to-homogeneous transition of plastic flows during nanoindentation of bulk metallic glasses: Fact or artifact?. Applied Physics Letters 90:21.
Crossref
L.C. Zhang, B.C. Wei, D.M. Xing, T.H. Zhang, W.H. Li & Y. Liu. (2007) The characterization of plastic deformation in Ce-based bulk metallic glasses. Intermetallics 15:5-6, pages 791-795.
Crossref
X.L. Fu, Y. Li & C.A. Schuh. (2007) Temperature, strain rate and reinforcement volume fraction dependence of plastic deformation in metallic glass matrix composites. Acta Materialia 55:9, pages 3059-3071.
Crossref
V. Keryvin. (2007) Indentation of bulk metallic glasses: Relationships between shear bands observed around the prints and hardness. Acta Materialia 55:8, pages 2565-2578.
Crossref
W. H. Jiang, F. X. Liu, P. K. Liaw & H. Choo. (2007) Shear strain in a shear band of a bulk-metallic glass in compression. Applied Physics Letters 90:18.
Crossref
L. Charleux, S. Gravier, M. Verdier, M. Fivel & J.J. Blandin. (2011) Indentation plasticity of amorphous and partially crystallized metallic glasses. Journal of Materials Research 22:2, pages 525-532.
Crossref
Antonia Antoniou, Ashraf Bastawros & Bulent Biner. (2011) Experimental observations of deformation behavior of bulk metallic glasses during wedge-like cylindrical indentation. Journal of Materials Research 22:2, pages 514-524.
Crossref
G.Y. Wang, P.K. Liaw, Y. Yokoyama, M. Freels, R.A. Buchanan, A. Inoue & C.R. Brooks. (2011) Effects of partial crystallization on compression and fatigue behavior of Zr-based bulk metallic glasses. Journal of Materials Research 22:2, pages 493-500.
Crossref
W.H. Jiang, F.X. Liu, H.H. Liao, H. Choo & P.K. Liaw. (2011) In situ thermographic observations on the compression behavior of a relaxed Zr-based bulk-metallic glass. Journal of Materials Research 22:2, pages 368-373.
Crossref
Florian H. Dalla Torre, Alban Dubach, Adrienne Nelson & Jörg F. Löffler. (2007) Temperature, Strain and Strain Rate Dependence of Serrated Flow in Bulk Metallic Glasses. MATERIALS TRANSACTIONS 48:7, pages 1774-1780.
Crossref
Byung-Gil Yoo, Ju-Young Kim & Jae-il Jang. (2007) Influence of Indenter Geometry on the Deformation Behavior of Zr<SUB>60</SUB>Cu<SUB>30</SUB>Al<SUB>10</SUB> Bulk Metallic Glass during Nanoindentation. MATERIALS TRANSACTIONS 48:7, pages 1765-1769.
Crossref
W. H. Jiang, F. Jiang, F. X. Liu, H. Choo, P. K. Liaw & K. Q. Qiu. (2006) Temperature dependence of serrated flows in compression in a bulk-metallic glass. Applied Physics Letters 89:26.
Crossref
Y F Gao. (2006) An implicit finite element method for simulating inhomogeneous deformation and shear bands of amorphous alloys based on the free-volume model. Modelling and Simulation in Materials Science and Engineering 14:8, pages 1329-1345.
Crossref
R.K. Guduru, K.A. Darling, R.O. Scattergood, C.C. Koch, K.L. Murty, M. Bakkal & A.J. Shih. (2006) Shear punch tests for a bulk metallic glass. Intermetallics 14:12, pages 1411-1416.
Crossref
W.H. Jiang, G.J. Fan, F.X. Liu, G.Y. Wang, H. Choo & P.K. Liaw. (2011) Rate dependence of shear banding and serrated flows in a bulk metallic glass. Journal of Materials Research 21:09, pages 2164-2167.
Crossref
Dongmei Xing, Taihua Zhang, Weihuo Li & Bingchen Wei. (2006) Characterization of plastic flow in two Zr-based bulk metallic glasses. Science in China Series E: Technological Sciences 49:4, pages 414-424.
Crossref
Zhang Lingchen, Xing Dongmei, Zhang Taihua, Wei Bingchen, Li Weihuo & Wang Yuren. (2006) Deformation behavior during nanoindentation in Ce-based bulk metallic glasses. Chinese Science Bulletin 51:13, pages 1639-1643.
Crossref
W.H. Jiang, F.X. Liu, D.C. Qiao, H. Choo & P.K. Liaw. (2006) Plastic flow in dynamic compression of a Zr-based bulk metallic glass. Journal of Materials Research 21:6, pages 1570-1575.
Crossref
Christopher A. Schuh. (2006) Nanoindentation studies of materials. Materials Today 9:5, pages 32-40.
Crossref
Benedikt Moser, Ruth Schwaiger & Ming Dao. 2006. Nanostructured Coatings. Nanostructured Coatings 27 77 .
H. Li, A.H.W. Ngan & M.G. Wang. (2011) Continuous Strain Bursts in Crystalline and Amorphous Metals During Plastic Deformation by Nanoindentation. Journal of Materials Research 20:11, pages 3072-3081.
Crossref
A. Concustell, J. Sort, G. Alcalá, S. Mato, A. Gebert, J. Eckert & M.D. Baró. (2011) Plastic Deformation and Mechanical Softening of Pd 40 Cu 30 Ni 10 P 20 Bulk Metallic Glass During Nanoindentation . Journal of Materials Research 20:10, pages 2719-2725.
Crossref
L.F. Liu, L.H. Dai, Y.L. Bai & B.C. Wei. (2005) Initiation and propagation of shear bands in Zr-based bulk metallic glass under quasi-static and dynamic shear loadings. Journal of Non-Crystalline Solids 351:40-42, pages 3259-3270.
Crossref
Xing Dong-Mei, Zhang Tai-Hua & Wei Bing-Chen. (2005) Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses. Chinese Physics Letters 22:8, pages 1994-1997.
Crossref
Hongwen Zhang, Xiaoning Jing, Ghatu Subhash, Laszlo J. Kecskes & Robert J. Dowding. (2005) Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation. Acta Materialia 53:14, pages 3849-3859.
Crossref
J. Michler, R. Rabe, J.-L. Bucaille, B. Moser, P. Schwaller & J.-M. Breguet. (2005) Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope. Wear 259:1-6, pages 18-26.
Crossref
G.P. Zhang, W. Wang, B. Zhang, J. Tan & C.S. Liu. (2005) On rate-dependent serrated flow behavior in amorphous metals during nanoindentation. Scripta Materialia 52:11, pages 1147-1151.
Crossref
A.C. Lund & C.A. Schuh. (2005) Strength asymmetry in nanocrystalline metals under multiaxial loading. Acta Materialia 53:11, pages 3193-3205.
Crossref
Y.F. Sun, T.L. Cheung, Y.R. Wang, C.H. Shek, W.H. Li & B.C. Wei. (2005) Effect of quasicrystalline phase on the deformation behavior of Zr62Al9.5Ni9.5Cu14Nb5 bulk metallic glass. Materials Science and Engineering: A 398:1-2, pages 22-27.
Crossref
B. Moser, J. Kuebler, H. Meinhard, W. Muster & J. Michler. (2005) Observation of Instabilities during Plastic Deformation by in‐situ SEM Indentation Experiments. Advanced Engineering Materials 7:5, pages 388-392.
Crossref
A. Antoniou, A.F. Bastawros, C.C.H. Lo & S.B. Biner. (2005) Deformation behavior of a zirconium based metallic glass during cylindrical indentation: in situ observations. Materials Science and Engineering: A 394:1-2, pages 96-102.
Crossref
Yunfeng Shi & Michael L. Falk. (2005) Structural transformation and localization during simulated nanoindentation of a noncrystalline metal film. Applied Physics Letters 86:1.
Crossref
Christopher A. Schuh, Alan C. Lund & T.G. Nieh. (2004) New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanistic modeling. Acta Materialia 52:20, pages 5879-5891.
Crossref
A.C. Lund & C.A. Schuh. (2004) The Mohr–Coulomb criterion from unit shear processes in metallic glass. Intermetallics 12:10-11, pages 1159-1165.
Crossref
C.A. Schuh & T.G. Nieh. (2011) A survey of instrumented indentation studies on metallic glasses. Journal of Materials Research 19:1, pages 46-57.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.