Citations (88)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (33)
Dingding Lin, MauryA. Nussbaum & MichaelL. Madigan. (2012) Efficacy of three interventions at mitigating the adverse effects of muscle fatigue on postural control. Ergonomics 55:1, pages 103-113.
Read now
Read now
DianeE. Gregory, Sonia Narula, SamuelJ. Howarth, Caryl Russell & JackP. Callaghan. (2008) The effect of fatigue on trunk muscle activation patterns and spine postures during simulated firefighting tasks. Ergonomics 51:7, pages 1032-1041.
Read now
Read now
DAVID H. DUPLESSIS, ELIZABETH H. GREENWAY, KRISTIN L. KEENE, IAN E. LEE, RODERICK L. CLAYTON, TERRI METZLER & FRANK B. UNDERWOOD. (1998) Effect of semi-rigid lumbosacral orthosis use on oxygen consumption during repetitive stoop and squat lifting *. Ergonomics 41:6, pages 790-797.
Read now
Read now
Swei-Pi Wu. (1998) 抬舉頻率與抬舉範圍對於男性偶發性抬舉能力之效應. Journal of the Chinese Institute of Industrial Engineers 15:3, pages 305-313.
Read now
Read now
PATRICK G. DEMPSEY. (1998) A critical review of biomechanical, epidemiological, physiological and psychophysical criteria for designing manual materials handling tasks. Ergonomics 41:1, pages 73-88.
Read now
Read now
P. CAPODAGLIO, E. M. CAPODAGLIO & G. BAZZINI. (1995) Tolerability to prolonged lifting tasks assessed by subjective perception and physiological responses. Ergonomics 38:10, pages 2118-2128.
Read now
Read now
GENEVIEVE BARIL-GINGRAS & MONIQUE LORTIE. (1995) The handling of objects other than boxes: univariate analysis of handling techniques in a large transport company. Ergonomics 38:5, pages 905-925.
Read now
Read now
TOMB. LEAMON. (1994) Research to reality: a critical review of the validity of various criteria for the prevention of occupationally induced low back pain disability. Ergonomics 37:12, pages 1959-1974.
Read now
Read now
THOMASR. WATERS, VERN PUTZ-ANDERSON, ARUN GARG & LAWRENCEJ. FINE. (1993) Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics 36:7, pages 749-776.
Read now
Read now
SHRAWAN KUMAR & ANIL MITAL. (1992) Margin of safety for the human back: a probable consensus based on published studies. Ergonomics 35:7-8, pages 769-781.
Read now
Read now
E. WELBERGEN, H. C. G. KEMPER, J. J. KNIBBE, H. M. TOUSSAINT & L. CLYSEN. (1991) Efficiency and effectiveness of stoop and squat lifting at different frequencies. Ergonomics 34:5, pages 613-624.
Read now
Read now
J. STEVENSON, T. BRYANT, D. GREENHORN, T. SMITH, J. DEAKIN & B. SURGENOR. (1990) The effect of lifting protocol on comparisons with isoinertial lifting performance. Ergonomics 33:12, pages 1455-1469.
Read now
Read now
YONGZHONG Yu & SIMEI LU. (1990) The acceptable load while marching at a speed of 5km h-1 for young Chinese males. Ergonomics 33:7, pages 885-890.
Read now
Read now
ZUXIANG ZHU & ZHIJUN ZHANG. (1990) Maximum acceptable repetitive lifting workload by Chinese subjects. Ergonomics 33:7, pages 875-884.
Read now
Read now
A. S. NICHOLSON. (1989) Review paper A comparative study of methods for establishing load handling capabilities. Ergonomics 32:9, pages 1125-1144.
Read now
Read now
J. M. STEVENSON, G. M. ANDREW, J. T. BRYANT, D. R. GREENHORN & J. M. THOMSON. (1989) Isoinertial tests to predict lifting performance.. Ergonomics 32:2, pages 157-166.
Read now
Read now
ASHRAFM. GENAIDY & SHIHABS. ASFOUR. (1989) Effects of frequency and load of lift on endurance time. Ergonomics 32:1, pages 51-57.
Read now
Read now
V. LOUHEVAARA, P. TERÄSLINNA, J. P. PIIRILÄ, S. SALMIO & J. ILMARINEN. (1988) Physiological responses during and after intermittent sorting of postal parcels. Ergonomics 31:8, pages 1165-1175.
Read now
Read now
A. GARG & J. BANAAG. (1988) Maximum acceptable weights, heart rates and RPEs for one hour's repetitive asymmetric lifting. Ergonomics 31:1, pages 77-96.
Read now
Read now
Y. ZHAO$suffix/text()$suffix/text(), S. K. UPADHYAYA & M. S. KAMINAKA. (1987) Foot-ground forces on sloping ground when lifting∗. Ergonomics 30:12, pages 1671-1687.
Read now
Read now
ANIL MITAL. (1987) Patterns of differences between the maximum weights of lift acceptable to experienced and inexperienced materials handlers. Ergonomics 30:8, pages 1137-1147.
Read now
Read now
ANIL MITAL & HAMIDF. FARD. (1986) Psychophysical and physiological responses to lifting symmetrical and asymmetrical loads symmetrically and asymmetrically. Ergonomics 29:10, pages 1263-1272.
Read now
Read now
Arun Garg, George Hagglund & Ken Mericle. (1986) A Physiological Evaluation of Time Standards For Warehouse Operations as Set by Traditional Work Measurement Techniques. IIE Transactions 18:3, pages 235-245.
Read now
Read now
BERNARDC. JIANG & ANIL MITAL. (1986) A procedure for designing/evaluating manual materials handling tasks. International Journal of Production Research 24:4, pages 913-925.
Read now
Read now
L. M. NICHOLSON & S. J. LEGG. (1986) A psychophysical study of the effects of load and frequency upon selection of workload in repetitive lifting. Ergonomics 29:7, pages 903-911.
Read now
Read now
. (1985) Bibliography. Ergonomics 28:1, pages 379-405.
Read now
Read now
WALDEMAR KARWOWSKI & M. M. Ayoub. (1984) Fuzzy modelling of stresses in manual lifting tasks. Ergonomics 27:6, pages 641-649.
Read now
Read now
S. KUMAR. (1984) The physiological cost of three different methods of lifting in sagittal and lateral planes. Ergonomics 27:4, pages 425-433.
Read now
Read now
S. J. LEGG & D. R. HASLAM. (1984) Effect of sleep deprivation on self-selected workload. Ergonomics 27:4, pages 389-396.
Read now
Read now
A. GARG & U. SAXENA. (1982) Maximum frequency acceptable to female workers for one-handed lifts in the horizontal plane. Ergonomics 25:9, pages 839-853.
Read now
Read now
A. -S. LJUNGBERG, F. GAMBERALE & Å. KILBOM. (1982) Horizontal lifting— Physiological and psychological responses. Ergonomics 25:8, pages 741-757.
Read now
Read now
S. J. LEGG & W. S. MYLES. (1981) Maximum acceptable repetitive lifting workloads for an 8-hour work-day using psychophysical and subjective rating methods. Ergonomics 24:12, pages 907-916.
Read now
Read now
JEANLANDA PYTEL & ELIEZIER KAMON. (1981) Dynamic strength test as a predictor for maximal and acceptable lifting. Ergonomics 24:9, pages 663-672.
Read now
Read now
Articles from other publishers (55)
Fares F. Alferdaws & Mohamed Z. Ramadan. (2020) Effects of Lifting Method, Safety Shoe Type, and Lifting Frequency on Maximum Acceptable Weight of Lift, Physiological Responses, and Safety Shoes Discomfort Rating. International Journal of Environmental Research and Public Health 17:9, pages 3012.
Crossref
Crossref
Nur Hajariah Che Hamid, Ayuni Che Zakaria, Nadia Mohd Mustafah, Aizreena Azaman & Khairunnisa Johar. (2020) Electromyography (EMG) for Assessment in Low Back Pain; Erector Spinae Muscle. IOP Conference Series: Materials Science and Engineering 834:1, pages 012043.
Crossref
Crossref
Verena C. Knott & Klaus Bengler. 2019. Advances in Manufacturing, Production Management and Process Control. Advances in Manufacturing, Production Management and Process Control
144
156
.
Helen Cristina Nogueira, Leticia Bergamin Januario, Roberta de Fátima Carreira Moreira & Ana Beatriz Oliveira. (2018) Adding Handles to Optimize Manual Box Handling. BioMed Research International 2018, pages 1-9.
Crossref
Crossref
N. Girish, Rauf Iqbal & Vivek Khanzode. (2017) LIFTING CAPACITY AMONG INDIAN MANUAL MATERIALS HANDLERS USING PROGRESSIVE ISOINERTIAL LIFTING EVALUATION. Journal of Musculoskeletal Research 20:01, pages 1750004.
Crossref
Crossref
Michael Yehoyakim, Sophie Bellefeuille, Julie N. Côté & André Plamondon. (2016) Relationship between leg and back strength with inter-joint coordination of females during lifting. International Journal of Industrial Ergonomics 56, pages 32-40.
Crossref
Crossref
Rosnah Mohd. Yusuff, Nor Hafeezah Kamarudin, Ariff Mubarak Kamal Ariffin, Siti Anom Ahmad & Mohd. Amin Mohd. Soom. 2016. Advances in Physical Ergonomics and Human Factors. Advances in Physical Ergonomics and Human Factors
829
838
.
Yi-Lang Chen & Wen-Ko Chiou. (2015) Comparison of static lifting capacity between experienced and novice Taiwanese female workers. Work 52:3, pages 549-558.
Crossref
Crossref
Yi-Lang Chen. (2014) Effects of work experience and exertion height on static lifting strengths and lift strategies of experienced and novice female participants. International Journal of Industrial Ergonomics 44:5, pages 607-614.
Crossref
Crossref
A. Plamondon, A. Delisle, S. Bellefeuille, D. Denis, D. Gagnon & C. Larivière. (2014) Lifting strategies of expert and novice workers during a repetitive palletizing task. Applied Ergonomics 45:3, pages 471-481.
Crossref
Crossref
A.D.J. Pinder & M.G. Boocock. (2014) Prediction of the maximum acceptable weight of lift from the frequency of lift. International Journal of Industrial Ergonomics 44:2, pages 225-237.
Crossref
Crossref
Robert R. Fox & James L. Smith. (2014) A psychophysical study of high-frequency arm lifting. International Journal of Industrial Ergonomics 44:2, pages 238-245.
Crossref
Crossref
Yi-Lang Chen & Yu-Chi Lee. 2012. Ergonomics in Asia: Development, Opportunities and Challenges. Ergonomics in Asia: Development, Opportunities and Challenges
201
207
.
Sheila Krawczyk. 2012. Occupational Ergonomics. Occupational Ergonomics
173
203
.
Yi-Lang Chen, Yu-Chi Lee & Chia-Jung Chen. (2011) Differences in lifting strength profiles between experienced workers and novices at various exertion heights. International Journal of Industrial Ergonomics 41:1, pages 53-58.
Crossref
Crossref
Vert Mooney, Leonard N. Matheson, Joe Verna, Scott Leggett, Thomas E. Dreisinger & John M. Mayer. (2010) Performance-integrated self-report measurement of physical ability. The Spine Journal 10:5, pages 433-440.
Crossref
Crossref
Anthony D. Banks & Fereydoun Aghazadeh. (2009) Progressive fatigue effects on manual lifting factors. Human Factors and Ergonomics in Manufacturing & Service Industries 19:5, pages 361-377.
Crossref
Crossref
Devender Singh, Woojin Park & Martin S. Levy. (2009) Obesity does not reduce maximum acceptable weights of lift. Applied Ergonomics 40:1, pages 1-7.
Crossref
Crossref
Tycho K. Fredericks, Anil R. Kumar & Sadat Karim. (2008) An ergonomic evaluation of a manual metal pouring operation. International Journal of Industrial Ergonomics 38:2, pages 182-192.
Crossref
Crossref
Devender Singh. (2016) Obesity Effects on Maximum Acceptable Weights of Lift. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 51:15, pages 918-922.
Crossref
Crossref
W.S. Marras, J. Parakkat, A.M. Chany, G. Yang, D. Burr & S.A. Lavender. (2006) Spine loading as a function of lift frequency, exposure duration, and work experience. Clinical Biomechanics 21:4, pages 345-352.
Crossref
Crossref
Leon Straker. (2003) Evidence to support using squat, semi-squat and stoop techniques to lift low-lying objects. International Journal of Industrial Ergonomics 31:3, pages 149-160.
Crossref
Crossref
R.E. Splittstoesser, K.G. Davis & W.S. Marras. (2016) Trade-offs between Trunk Flexion, Hip Flexion, and Knee Angle in Lifting below Waist Level. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 44:29, pages 5-9-5-12.
Crossref
Crossref
Natalie Revuelta, Anne Dauphin, Odile Kowslowski, Domitille Dubois & André Thevenon. (2000) Heart rate response to two lifting techniques. Archives of Physical Medicine and Rehabilitation 81:7, pages 958-959.
Crossref
Crossref
Leon Straker & Peter Duncan. (2000) Psychophysical and psychological comparison of squat and stoop lifting by young females. Australian Journal of Physiotherapy 46:1, pages 27-32.
Crossref
Crossref
Shrawan Kumar & Eugene C. Lechelt. (1999) Comparative resolution of metabolic and psychophysical variables in discriminating between small-difference low-demand lifting tasks. International Journal of Industrial Ergonomics 24:1, pages 61-71.
Crossref
Crossref
K.A. Khalaf, M. Parnianpour, P.J. Sparto & K. Barin. (1999) Feature extraction and quantification of the variability of dynamic performance profiles due to the different sagittal lift characteristics. IEEE Transactions on Rehabilitation Engineering 7:3, pages 278-288.
Crossref
Crossref
Patrick J. Sparto, Mohamad Parnianpour, Tom E. Reinsel & Sheldon Simon. (1997) The Effect of Fatigue on Multijoint Kinematics and Load Sharing During a Repetitive Lifting Test. Spine 22:22, pages 2647-2654.
Crossref
Crossref
JA Nicholls. (1997) Patient handling training and work-related back pain. British Journal of Therapy and Rehabilitation 4:8, pages 429-434.
Crossref
Crossref
Patrick G. Dempsey, Alex Burdorf & Barbara S. Webster. (1997) The Influence of Personal Variables on Work-Related Low-Back Disorders and Implications for Future Research. Journal of Occupational & Environmental Medicine 39:8, pages 748-759.
Crossref
Crossref
Ursula Wright & Anil Mital. (1997) Is there a need for psychophysical strength studies of the aged?. Journal of Occupational Rehabilitation 7:1, pages 53-60.
Crossref
Crossref
Yung-Hui Lee & Yi-Lang Chen. (2016) An Isometric Predictor for Maximum Acceptable Weight of Lift for Chinese Men. Human Factors: The Journal of the Human Factors and Ergonomics Society 38:4, pages 646-653.
Crossref
Crossref
Yung-Hui Lee & Yi-Lang Chen. (1996) Strength-limiting factors for the determination of frequent and infrequent lifting capacities. International Journal of Industrial Ergonomics 18:1, pages 51-60.
Crossref
Crossref
Marie Authier, Monique Lortie & Micheline Gagnon. (1996) Manual handling techniques: Comparing novices and experts. International Journal of Industrial Ergonomics 17:5, pages 419-429.
Crossref
Crossref
Gary A. Mirka & Daniel P. Kelaher. (2016) The Effects of Lifting Frequency on the Dynamics of Lifting. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 39:10, pages 650-654.
Crossref
Crossref
Robin Burgess-Limerick, Bruce Abernethy, Robert J. Neal & Vaughan Kippers. (2016) Self-Selected Manual Lifting Technique: Functional Consequences of the Interjoint Coordination. Human Factors: The Journal of the Human Factors and Ergonomics Society 37:2, pages 395-411.
Crossref
Crossref
KB Hagen, O Sørhagen & K Harms-Ringdahl. (1995) Influence of weight and frequency on thigh and lower-trunk motion during repetitive lifting employing stoop and squat techniques. Clinical Biomechanics 10:3, pages 122-127.
Crossref
Crossref
Sven-Erik Johansson & Gunnar Borg. (1993) Perception of heavy work operations by tank truck drivers. Applied Ergonomics 24:6, pages 421-426.
Crossref
Crossref
K�re B. Hagen, Jostein Hallen & Karin Harms-Ringdahl. (1993) Physiological and subjective responses to maximal repetitive lifting employing stoop and squat technique. European Journal of Applied Physiology and Occupational Physiology 67:4, pages 291-297.
Crossref
Crossref
Shrawan Kumar, Anil Mital, Doug Garand & A. Persad. (1993) Operator stress in palletizing tasks with restricted access and headroom. International Journal of Industrial Ergonomics 12:1-2, pages 153-162.
Crossref
Crossref
Sean Gallagher & Christopher A. Hamrick. (1991) The kyphotic lumbar spine: Issues in the analysis of the stresses in stooped lifting. International Journal of Industrial Ergonomics 8:1, pages 33-47.
Crossref
Crossref
Shrawan Kumar. (2016) Symmetric and Asymmetric Stoop-Lifting Strength. Proceedings of the Human Factors Society Annual Meeting 34:10, pages 762-766.
Crossref
Crossref
Clarence C. Rodrigues, J.J. Congleton, R.J. Koppa & R.D. Huchingson. (1989) Maximum acceptable weight of lift for an asymmetrical combination manual handling task. International Journal of Industrial Ergonomics 4:3, pages 245-253.
Crossref
Crossref
Shrawan Kumar & Anil Mital. (2016) Safety of Back! What is the Margin?. Proceedings of the Human Factors Society Annual Meeting 33:11, pages 677-681.
Crossref
Crossref
S. Kumar. (1988) The effects of the reach and level of lifting/lowering tasks on metabolic cost in symmetric and asymmetric planes. International Journal of Industrial Ergonomics 2:4, pages 273-284.
Crossref
Crossref
M.A. McCoy, J.J. Congleton, W.L. Johnston & B.C. Jiang. (1988) The role of lifting belts in manual lifting. International Journal of Industrial Ergonomics 2:4, pages 259-266.
Crossref
Crossref
F. Gamberale, A.-S. Ljungberg, G. Annwall & Å. Kilbom. (1987) An experimental evaluation of psychophysical criteria for repetitive lifting work. Applied Ergonomics 18:4, pages 311-321.
Crossref
Crossref
Anil Mital. (2016) Comparison of Lifting Capabilities of Industrial and Non-Industrial Populations. Proceedings of the Human Factors Society Annual Meeting 30:3, pages 239-243.
Crossref
Crossref
A. Mital, C. Channaveeraiah, H.F. Fard & H. Khaledi. (1986) Reliability of repetitive dynamic strengths as a screening tool for manual lifting tasks. Clinical Biomechanics 1:3, pages 125-129.
Crossref
Crossref
Bernard C. Jiang & Anil Mital. (2016) Job Design/Redesign Procedure for Manual Materials Handling Tasks. Proceedings of the Human Factors Society Annual Meeting 29:11, pages 1002-1006.
Crossref
Crossref
Toivo Niskanen. (1985) Accidents and minor accidents of the musculoskeletal system in heavy (concrete reinforcement work) and light (painting) construction work. Journal of Occupational Accidents 7:1, pages 17-32.
Crossref
Crossref
Ashraf M. Genaidy, Tarek M. Khalil, Shihab S. Asfour & Sherif M. Waly. (2016) The Maximum Efficiency of the Human Machine during Lifting. Proceedings of the Human Factors Society Annual Meeting 28:7, pages 591-594.
Crossref
Crossref
Arun Garg, Deven Sharma, Don B. Chaffin & John M. Schmidler. (2016) Biomechanical Stresses as Related to Motion Trajectory of Lifting. Human Factors: The Journal of the Human Factors and Ergonomics Society 25:5, pages 527-539.
Crossref
Crossref
Colin G. Drury, Chau-Hing Law & Christopher S. Pawenski. (2016) A Survey of Industrial Box Handling. Human Factors: The Journal of the Human Factors and Ergonomics Society 24:5, pages 553-565.
Crossref
Crossref
Arun Garg & U. Saxena. (2016)
Container Characteristics and Maximum Acceptable Weight of Lift
1
. Human Factors: The Journal of the Human Factors and Ergonomics Society 22:4, pages 487-495.
Crossref
Crossref