Advanced search
Publication Cover
International Journal of Smart and Nano Materials Volume 12, 2021 - Issue 3: Flexible Electronics
Submit an article Journal homepage
4,188
Views
9
CrossRef citations to date
0
Altmetric
Research Article

Hydrogel-elastomer-based stretchable strain sensor fabricated by a simple projection lithography method

Zhenqing Lia Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
,
Xiangnan Hea Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
,
Jianxiang Chenga Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
,
Honggeng Lia Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaView further author information
,
Yuan-Fang Zhangc Digital Manufacturing and Design Centre, Singapore University of Technology and Design, SingaporeCorrespondence[email protected]
View further author information
,
Xiaojuan Shid Department of Mechanical Engineering, University of Colorado Denver, Denver, CO, USA;e National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin, P. R. ChinaView further author information
,
Kai Yud Department of Mechanical Engineering, University of Colorado Denver, Denver, CO, USAView further author information
,
Hui Ying Yangc Digital Manufacturing and Design Centre, Singapore University of Technology and Design, SingaporeView further author information
&
Qi Gea Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China;b Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities, Southern University of Science and Technology, Shenzhen, ChinaCorrespondence[email protected]
View further author information
 show all
Pages 256-268 | Received 01 May 2021, Accepted 29 Jun 2021, Published online: 22 Jul 2021

Citations (9)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Huilin Ren, Xiaodan Yang, Zhenhu Wang, Xuguang Xu, Rong Wang, Qi Ge & Yi Xiong. (2022) Smart structures with embedded flexible sensors fabricated by fused deposition modeling-based multimaterial 3D printing. International Journal of Smart and Nano Materials 13:3, pages 447-464.
Read now

Articles from other publishers (8)

Kamalesh Tripathy & Mitradip Bhattacharjee. (2023) Stretching mode deformation analysis for an elastomeric encapsulation-assisted stable flexible electronic substrate. Flexible and Printed Electronics 8:2, pages 025002.
Crossref
Congjian Lin, Yuan‐Fang Zhang, Dingjie Lu, Arlindo Silva, Zhuangjian Liu & Hui Ying Yang. (2023) Low‐Temperature Resistant Stretchable Micro‐Supercapacitor Based on 3D Printed Octet‐Truss Design. Small 19:23.
Crossref
Xiangnan He, Jianxiang Cheng, Zhenqing Li, Haitao Ye, Zechu Sun, Qingjiang Liu, Honggeng Li, Rong Wang & Qi Ge. (2023) Stretchable Ultraviolet Curable Ionic Conductive Elastomers for Digital Light Processing Based 3D Printing. Advanced Materials Technologies.
Crossref
Binbin Guo, Yukun Zhong, Xiaoxia Song, Xiaoteng Chen, Peng Zhou, Fuxin Zhao & Jiaming Bai. (2022) 3D Printing of Mechanically Elastic, Self‐Adhesive, and Biocompatible Organohydrogels for Wearable and Breathable Strain Sensors. Advanced Materials Technologies 8:5.
Crossref
Weixuan Wang, Wei Zhou, Hengyi Shi, Dongyi He, Yunsong Pang, Xiaoliang Zeng & Chuanchang Li. (2023) Soft and thermally conductive gels by introducing free-movable polymer chains into network. Polymer 267, pages 125642.
Crossref
Yiming Zhao, Jiuyu Cui, Xiaoyong Qiu, Yonggan Yan, Zekai Zhang, Kezhong Fang, Yu Yang, Xiaolai Zhang & Jun Huang. (2022) Manufacturing and post-engineering strategies of hydrogel actuators and sensors: From materials to interfaces. Advances in Colloid and Interface Science 308, pages 102749.
Crossref
Dianbo Zhang, Minyue Zhang, Jingwen Wang, Hongling Sun, Hu Liu, Liwei Mi, Chuntai Liu & Changyu Shen. (2022) Impedance response behavior and mechanism study of axon-like ionic conductive cellulose-based hydrogel strain sensor. Advanced Composites and Hybrid Materials 5:3, pages 1812-1820.
Crossref
Congjian Lin & Hui Ying Yang. (2022) 3D printing of stretchable, ionic conductive, adhesive hydrogel with enhanced water retention for motion detection. Materials Today: Proceedings 70, pages 265-269.
Crossref

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.