Citations (60)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Marina Yiasemidou, Daniel Glassman, David Jayne & Danilo Miskovic. (2018) Is patient-specific pre-operative preparation feasible in a clinical environment? A systematic review and meta-analysis. Computer Assisted Surgery 23:1, pages 57-68.
Read now
Read now
Richard R. J. Cousley, Mark Bainbridge & P. Emile Rossouw. (2017) The accuracy of maxillary positioning using digital model planning and 3D printed wafers in bimaxillary orthognathic surgery. Journal of Orthodontics 44:4, pages 256-267.
Read now
Read now
Se-Ho Lim, Yeon-Ho Kim, Moon-Key Kim, Woong Nam & Sang-Hoon Kang. (2016) Validation of a fibula graft cutting guide for mandibular reconstruction: experiment with rapid prototyping mandible model. Computer Assisted Surgery 21:1, pages 9-17.
Read now
Read now
Waleed K. Saleh, Emy Ariffin, Martyn Sherriff & Dirk Bister. (2015) Accuracy and reproducibility of linear measurements of resin, plaster, digital and printed study-models. Journal of Orthodontics 42:4, pages 301-306.
Read now
Read now
Articles from other publishers (56)
Amir Yari, Mahboube Hasheminasab, Amirali Badri, Behrad Tanbakuchi & Paniz Fasih. (2023) Accuracy of maxillary repositioning surgery in teaching hospitals using conventional model surgery. Oral and Maxillofacial Surgery.
Crossref
Crossref
Farzin Sarkarat, Omid Tofighi, Abdolreza Jamilian, Ali Fateh & Farid Abbaszadeh. (2023) Are Virtually Designed 3D Printed Surgical Splints Accurate Enough for Maxillary Reposition as an Intermediate Orthognathic Surgical Guide. Journal of Maxillofacial and Oral Surgery.
Crossref
Crossref
Edward Riordan, Amanda Yung, Kai Cheng, Lydia Lim, Jonathan Clark, Michael Rtshiladze & Sydney Ch’ng. (2023) Modeling Methods in Craniofacial Virtual Surgical Planning. Journal of Craniofacial Surgery 34:4, pages 1191-1198.
Crossref
Crossref
Gaurav Dod, Rahul Jibhakate & Pramod Walke. (2023) A review on 3D printing maxillofacial surgery: Present work and future prospects. Materials Today: Proceedings.
Crossref
Crossref
Vincenzo Ronsivalle, Ferdinando Ruiz, Antonino Lo Giudice, Elisabetta Carli, Pietro Venezia, Gaetano Isola, Rosalia Leonardi & Stefano Mummolo. (2023) From Reverse Engineering Software to CAD-CAM Systems: How Digital Environment Has Influenced the Clinical Applications in Modern Dentistry and Orthodontics. Applied Sciences 13:8, pages 4986.
Crossref
Crossref
Sung-Ho Ha, Suk Min Youn, Ci Young Kim, Chun-Gi Jeong & Jin-Young Choi. (2023) Surgical Accuracy of 3D Virtual Surgery and CAD/CAM-Assisted Orthognathic Surgery for Skeletal Class III Patients. Journal of Craniofacial Surgery 34:1, pages 96-102.
Crossref
Crossref
Yong-Chan Lee, Hong-Bum Sohn, Young-Wook Park & Ji-Hyeon Oh. (2022) Evaluation of postoperative changes in condylar positions after orthognathic surgery using balanced orthognathic surgery system. Maxillofacial Plastic and Reconstructive Surgery 44:1.
Crossref
Crossref
Yipeng Wang, Peiqi Wang, Xiang Xiang, Hui Xu, Yuting Tang, Yumeng Zhou, Ding Bai & Chaoran Xue. (2022) Effect of occlusal coverage depths on the precision of 3D-printed orthognathic surgical splints. BMC Oral Health 22:1.
Crossref
Crossref
Kaleem S. Ahmed, Hamza Ibad, Zafar A. Suchal & Arun K. Gosain. (2022) Implementation of 3D Printing and Computer-Aided Design and Manufacturing (CAD/CAM) in Craniofacial Reconstruction. Journal of Craniofacial Surgery 33:6, pages 1714-1719.
Crossref
Crossref
Tulsi Roy & Derek M. Steinbacher. (2022) Virtual Planning and 3D Printing in Contemporary Orthognathic Surgery. Seminars in Plastic Surgery 36:03, pages 169-182.
Crossref
Crossref
Zhaokun Zhu, Ze He, Yue Tai, Yao Liu, Hanghang Liu & En Luo. (2022) Surgical Guides and Prebent Titanium Improve the Planning for the Treatment of Dentofacial Deformities Secondary to Condylar Osteochondroma. Journal of Craniofacial Surgery 33:5, pages 1488-1492.
Crossref
Crossref
Joshua Yoon, Isabelle Lock, Caleb K. Fan, Uma Maduekwe, Michael Ha, Yvonne Rasko, Michael P. Grant, Arthur J. Nam, Jordan P. Steinberg & Fan Liang. (2022) Many Moving Pieces: Virtual Preoperative Surgical Planning for Traumatic Occlusal Splints. Journal of Craniofacial Surgery 33:4, pages 1037-1041.
Crossref
Crossref
A. Williams, K. Walker, D. Hughes, A.M.C. Goodson & S.F. Mustafa. (2022) Accuracy and cost effectiveness of a waferless osteotomy approach, using patient specific guides and plates in orthognathic surgery: a systematic review. British Journal of Oral and Maxillofacial Surgery 60:5, pages 537-546.
Crossref
Crossref
Yuxian Chu, Bin Ye, Qionghui Wu, Yu Wang, Peng Wang & Jihua Li. (2022) The accuracy of virtual surgical planning in segmental Le Fort I surgery:comparison of planned and actual outcome. Journal of Plastic, Reconstructive & Aesthetic Surgery.
Crossref
Crossref
Francisco Samuel Rodrigues Carvalho, Déborah Isis de Oliveira Barbosa, Iara Furtado Torquato, André Mattos Britto de Souza, Roberta Dalcico, Filipe Nobre Chaves & Fábio Wildson Gurgel Costa. (2021) The Use of Surgical Splints in Orthognathic Surgery: A Bibliometric Study. Indian Journal of Plastic Surgery 55:01, pages 026-030.
Crossref
Crossref
Tingwu Su, Hongqi Zhang, Ting Kang, Mengqi Zhou, Jie Han, Nan Ning, Hai Lin, Xuepeng Chen & Qianming Chen. (2022) Application progress of three-dimensional printing technology in orthodontics. Digital Medicine 8:1, pages 31.
Crossref
Crossref
Roxanne Khalaj & Dennis Douroumis. 2022. Long-Acting Drug Delivery Systems. Long-Acting Drug Delivery Systems
83
127
.
Katrin Willinger, Godoberto Guevara-Rojas, Julia Cede, Kurt Schicho, Tanja Stamm & Clemens Klug. (2021) Comparison of feasibility, time consumption and costs of three virtual planning systems for surgical correction of midfacial deficiency. Maxillofacial Plastic and Reconstructive Surgery 43:1.
Crossref
Crossref
Roxanne Khalaj, Atabak Ghanizadeh Tabriz, Michael I. Okereke & Dennis Douroumis. (2021) 3D printing advances in the development of stents. International Journal of Pharmaceutics 609, pages 121153.
Crossref
Crossref
Hyun Jun Oh, Jun-Ho Moon, Hyunbin Ha, In Seon Son, Yong-Chan Lee, Shin-Jae Lee, Hong-Bum Sohn & Byoung-Moo Seo. (2021) Virtually-Planned Orthognathic Surgery Achieves an Accurate Condylar Position. Journal of Oral and Maxillofacial Surgery 79:5, pages 1146.e1-1146.e25.
Crossref
Crossref
Zhixing Chen, Shuixue Mo, Xuemin Fan, Yuting You, Guangrong Ye & Nuo Zhou. (2021) A Meta-analysis and Systematic Review Comparing the Effectiveness of Traditional and Virtual Surgical Planning for Orthognathic Surgery: Based on Randomized Clinical Trials. Journal of Oral and Maxillofacial Surgery 79:2, pages 471.e1-471.e19.
Crossref
Crossref
Faezeh Yousefi, Abbas Shokri, Maryam Farhadian, Fariborz Vafaei & Fereshte Forutan. (2021) Accuracy of maxillofacial prototypes fabricated by different 3-dimensional printing technologies using multi-slice and cone-beam computed tomography. Imaging Science in Dentistry 51:1, pages 41.
Crossref
Crossref
Islam Uzgenbayevich Vagabov, Edgar Sabirovich Kafarov & Oleg Konstantino-vich Zenin. (2021) Variants of Blood Supply to Kidney Segments According to 3d Anatomical Analysis. Entomology and Applied Science Letters 8:1, pages 60-65.
Crossref
Crossref
AF Alfouzan. (2021) The role of simulator and digital technologies in head and neck reconstruction. Nigerian Journal of Clinical Practice 24:10, pages 1415.
Crossref
Crossref
Lobat Tayebi, Reza Masaeli & Kavosh ZandsalimiLobat Tayebi, Reza Masaeli & Kavosh Zandsalimi. 2021. 3D Printing in Oral & Maxillofacial Surgery. 3D Printing in Oral & Maxillofacial Surgery
99
118
.
Farshid Bastami, Siamak Hemmatpour & Arash Khojasteh. 2021. Integrated Procedures in Facial Cosmetic Surgery. Integrated Procedures in Facial Cosmetic Surgery
767
783
.
Giuseppe Palazzo, Vincenzo Ronsivalle, Giacomo Oteri, Antonino Lo Giudice, Corrado Toro, Paola Campagna, Romeo Patini, Salvatore Bocchieri, Alberto Bianchi & Gaetano Isola. (2020) Comparison between Additive and Subtractive CAD-CAM Technique to Produce Orthognathic Surgical Splints: A Personalized Approach. Journal of Personalized Medicine 10:4, pages 273.
Crossref
Crossref
Hyung Joon Seo, Rafael Denadai, Betty Chien-Jung Pai & Lun-Jou Lo. (2020) Digital Occlusion Setup Is Quantitatively Comparable With the Conventional Dental Model Approach. Annals of Plastic Surgery 85:2, pages 171-179.
Crossref
Crossref
Letícia Liana Chihara, Jéssica de Fátima Segantin, Paulo Esteves Pinto Faria, Eduardo Sant’Ana, Eduardo Dias-Ribeiro, Renato Luiz Maia Nogueira & Osny Ferreira-Júnior. (2020) The Prediction Capacity 3-D Software, on a 2-D Analysis, in Planning the Positioning of the Upper Lip After Maxillary Advancement. Craniomaxillofacial Trauma & Reconstruction 13:2, pages 93-98.
Crossref
Crossref
David Silveira Alencar, Rhita Cristina Cunha Almeida, Caroline Pelagio Maues Casagrande, Roberto Prado, Alexandre Hermolin & Felipe de Assis Ribeiro Carvalho. (2020) Orthodontic-surgical treatment for a patient with Class II malocclusion and inadequate maxillary incisor inclination. American Journal of Orthodontics and Dentofacial Orthopedics 157:5, pages 690-703.
Crossref
Crossref
Sarayuth Dumrongwongsiri, Hsiu-Hsia Lin, Lien-Shin Niu & Lun-Jou Lo. (2019) Customized Three-Dimensional Printing Spacers for Bone Positioning in Orthognathic Surgery for Correction and Prevention of Facial Asymmetry. Plastic and Reconstructive Surgery 144:2, pages 246e-251e.
Crossref
Crossref
Leila Perea-Lowery & Pekka K. Vallittu. (2019) Resin adjustment of three-dimensional printed thermoset occlusal splints: Bonding properties – Short communication. Journal of the Mechanical Behavior of Biomedical Materials 95, pages 215-219.
Crossref
Crossref
Daniel Schneider, Peer W. Kämmerer, Matthias Hennig, Gerhard Schön, Daniel G. E. Thiem & Reinhard Bschorer. (2018) Customized virtual surgical planning in bimaxillary orthognathic surgery: a prospective randomized trial. Clinical Oral Investigations 23:7, pages 3115-3122.
Crossref
Crossref
Emanuele Zavattero, Michele Romano, Giovanni Gerbino, Diego Sergio Rossi, Aldo Bruno Giannì, Guglielmo Ramieri & Alessandro Baj. (2019) Evaluation of the Accuracy of Virtual Planning in Orthognathic Surgery. Journal of Craniofacial Surgery 30:4, pages 1214-1220.
Crossref
Crossref
Ashkan Shafiee, Elham Ghadiri, Haripriya Ramesh, Carlos Kengla, Jareer Kassis, Paul Calvert, David Williams, Ali Khademhosseini, Roger Narayan, Gabor Forgacs & Anthony Atala. (2019) Physics of bioprinting. Applied Physics Reviews 6:2.
Crossref
Crossref
Cheng-Ting HoHsiu-Hsia LinLun-Jou Lo. (2019) Intraoral Scanning and Setting Up the Digital Final Occlusion in Three-Dimensional Planning of Orthognathic Surgery: Its Comparison with the Dental Model Approach. Plastic & Reconstructive Surgery 143:5, pages 1027e-1036e.
Crossref
Crossref
P. Wang, Z. Zhang, Y. Wang, X. Li, B. Ye & J. Li. (2019) The accuracy of virtual-surgical-planning-assisted treatment of hemifacial microsomia in adult patients: distraction osteogenesis vs. orthognathic surgery. International Journal of Oral and Maxillofacial Surgery 48:3, pages 341-346.
Crossref
Crossref
Leonid Chepelev, Nicole Wake, Justin Ryan, Waleed Althobaity, Ashish Gupta, Elsa Arribas, Lumarie Santiago, David H Ballard, Kenneth C Wang, William Weadock, Ciprian N Ionita, Dimitrios Mitsouras, Jonathan Morris, Jane Matsumoto, Andy Christensen, Peter Liacouras, Frank J Rybicki & Adnan Sheikh. (2018) Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios. 3D Printing in Medicine 4:1.
Crossref
Crossref
Hyemin Lee, Jooly Cha, Youn-Sic Chun & Minji Kim. (2018) Comparison of the occlusal contact area of virtual models and actual models: a comparative in vitro study on Class I and Class II malocclusion models. BMC Oral Health 18:1.
Crossref
Crossref
Kan Chen, Di Xiao, Bassam Abotaleb, Haozhe Chen, Yunfeng Li & Songsong Zhu. (2018) Accuracy of Virtual Surgical Planning in Treatment of Temporomandibular Joint Ankylosis Using Distraction Osteogenesis: Comparison of Planned and Actual Results. Journal of Oral and Maxillofacial Surgery 76:11, pages 2422.e1-2422.e20.
Crossref
Crossref
Suhani Ghai, Yogesh Sharma, Neha Jain, Mrinal Satpathy & Ajay Kumar Pillai. (2018) Use of 3-D printing technologies in craniomaxillofacial surgery: a review. Oral and Maxillofacial Surgery 22:3, pages 249-259.
Crossref
Crossref
Ming Zhu, Fei Liu, Chaozheng Zhou, Li Lin, Yan Zhang, Gang Chai, Le Xie, Fazhi Qi & Qingfeng Li. (2018) Does intraoperative navigation improve the accuracy of mandibular angle osteotomy: Comparison between augmented reality navigation, individualised templates and free-hand techniques. Journal of Plastic, Reconstructive & Aesthetic Surgery 71:8, pages 1188-1195.
Crossref
Crossref
Hsiu-Hsia Lin, Daniel Lonic & Lun-Jou Lo. (2018) 3D printing in orthognathic surgery − A literature review. Journal of the Formosan Medical Association 117:7, pages 547-558.
Crossref
Crossref
Marina Yiasemidou, Raffaele Galli, Daniel Glassman, Matthew Tang, Rahoz Aziz, David Jayne & Danilo Miskovic. (2017) Patient-specific mental rehearsal with interactive visual aids: a path worth exploring?. Surgical Endoscopy 32:3, pages 1165-1173.
Crossref
Crossref
Carly A. Jacobs & Alexander Y. Lin. (2017) A New Classification of Three-Dimensional Printing Technologies: Systematic Review of Three-Dimensional Printing for Patient-Specific Craniomaxillofacial Surgery. Plastic & Reconstructive Surgery 139:5, pages 1211-1220.
Crossref
Crossref
E. Shaheen, Y. Sun, R. Jacobs & C. Politis. (2017) Three-dimensional printed final occlusal splint for orthognathic surgery: design and validation. International Journal of Oral and Maxillofacial Surgery 46:1, pages 67-71.
Crossref
Crossref
Philip Tack, Jan Victor, Paul Gemmel & Lieven Annemans. (2016) 3D-printing techniques in a medical setting: a systematic literature review. BioMedical Engineering OnLine 15:1.
Crossref
Crossref
Nan Zhang, Shuguang Liu, Zhiai Hu, Jing Hu, Songsong Zhu & Yunfeng Li. (2016) Accuracy of virtual surgical planning in two-jaw orthognathic surgery: comparison of planned and actual results. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology 122:2, pages 143-151.
Crossref
Crossref
Jonathan L. Jones, Stephen Evans & Simon D. Jones. (2016) Minimal-show orthognathic surgical splint. British Journal of Oral and Maxillofacial Surgery 54:6, pages e57-e58.
Crossref
Crossref
Saahil Mehta, Nicholas Byrne, Narayan Karunanithy & Jian Farhadi. (2016) 3D printing provides unrivalled bespoke teaching tools for autologous free flap breast reconstruction. Journal of Plastic, Reconstructive & Aesthetic Surgery 69:4, pages 578-580.
Crossref
Crossref
Miles J. Pfaff & Derek M. Steinbacher. (2016) Plastic Surgery Applications Using Three-Dimensional Planning and Computer-Assisted Design and Manufacturing. Plastic and Reconstructive Surgery 137:3, pages 603e-616e.
Crossref
Crossref
Ashkan Shafiee & Anthony Atala. (2016) Printing Technologies for Medical Applications. Trends in Molecular Medicine 22:3, pages 254-265.
Crossref
Crossref
Yunfeng Li, Yangmei Jiang, Bin Ye, Jing Hu, Qianming Chen & Songsong Zhu. (2016) Treatment of Dentofacial Deformities Secondary to Osteochondroma of the Mandibular Condyle Using Virtual Surgical Planning and 3-Dimensional Printed Surgical Templates. Journal of Oral and Maxillofacial Surgery 74:2, pages 349-368.
Crossref
Crossref
J. T. Bachelet, J. Y. Cliet, J. Chauvel-Picard & P. Bouletreau. (2016) La gouttière chirurgicale, place dans la chirurgie orthognathique et perspectives. Revue d'Orthopédie Dento-Faciale 50:1, pages 71-76.
Crossref
Crossref
M. Šrubař, T. Dostálová, P. Hofmanová, R. Foltán & H. Eliášová. (2015) Introduction to 3D Planning in Orthognatic Surgery. 3D Simulation of Orthognatic Surgery Using Dolphin Imaging 3D<sup>®</sup> Software. Česká stomatologie/Praktické zubní lékařství 115:2, pages 36-45.
Crossref
Crossref
Yunfeng Li, Yangmei Jiang, Nan Zhang, Rui Xu, Jing Hu & Songsong Zhu. (2015) Clinical Feasibility and Efficacy of Using Virtual Surgical Planning in Bimaxillary Orthognathic Surgery Without Intermediate Splint. Journal of Craniofacial Surgery 26:2, pages 501-505.
Crossref
Crossref