Materials Research Letters
Volume 12, 2024 - Issue 8
Open access
467
Views
0
CrossRef citations to date
0
Altmetric
Original Reports
Synergistic strengthening of crack-free Al–Zn–Mg–Cu alloys with hierarchical microstructures achieved via laser powder bed fusion
Jungho Choea Department of 3D Printing Materials, Korea Institute of Materials Science, Changwon, Republic of Korea;b Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of KoreaView further author information
, Kyung Tae Kima Department of 3D Printing Materials, Korea Institute of Materials Science, Changwon, Republic of KoreaCorrespondence[email protected]
https://orcid.org/0000-0003-2045-095XView further author information
Jeong Min Parka Department of 3D Printing Materials, Korea Institute of Materials Science, Changwon, Republic of KoreaView further author information
, Hyomoon Jooc Research & Development Division, Hyundai Motor Group, Hwaseong, Republic of Korea;d Department of Materials Science and Engineering, Yonsei University, Seoul, Republic of KoreaView further author information
, Sang Guk Jeongb Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of KoreaView further author information
, Eun Seong Kimb Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of KoreaView further author information
, Soung Yeoul Ahnb Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of KoreaView further author information
, Gang Hee Gub Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of KoreaView further author information
& Hyoung Seop Kimb Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea;e Graduate Institute of Ferrous & Eco Materials Technology (GIFT), Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea;f Institute for Convergence Research and Education in Advanced Technology, Yonsei University, Seoul, Republic of Korea;g Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, Sendai, JapanCorrespondence[email protected]
https://orcid.org/0000-0002-3155-583XView further author information
Pages 598-605
|
Received 28 Feb 2024, Published online: 06 Jun 2024
Reprints and Permissions
This is an open access article distributed under the terms of the Creative Commons CC BY license, which permits unrestricted use, distribution, reproduction in any medium, provided the original work is properly cited.
You are not required to obtain permission to reuse this article in part or whole.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.