References
- Pham DT, Yeo SH. Strategies for gripper design and selection in robotic assembly. Int. J. Prod. Res. 1991;29:303–316.
- Monkman GJ, Hesse S, Steinmann R, et al. Robot grippers. Wiley-VCH; 2007.
- Birglen L, Laliberte T, Gosselin C. Underactuated robotic hands. Springer; 2007.
- Meier RC. Adaptive robotic gripper assembly. US patent 4765669; 1987.
- Jorg S, Langwald J, Stelter J, et al. Robot assembly using a multi-sensory approach. Proceedings of IEEE International Conference on Robotics and Automation; San Francisco; 2000. p. 3687–3694.
- Zhuang H, Wang K, Roth ZS. Simultaneous calibration of a robot and hand-mounted camera. IEEE Trans. Rob. Autom. 1995;11:649–660.
- Brown E, Rodenberg N, Amend J, et al. Universal robotic gripper based on the jamming of granular material. Proc. Nat. Acad. Sci. 2010;107:18809–18814.
- Amend JR, Brown E, Rondenberg N, et al. A positive pressure universal gripper based on the jamming of granular material. IEEE Trans. Rob. 2012;28:341–350.
- Yoshikawa T. Passive and active closures by constraining mechanisms. Trans. ASME J. DSMC. 1999;121:418–424.
- van der Stappen AF, Goldberg K, Overmars MH. Geometric eccentricity and the complexity of manipulation Plans. Algorithmica. 2000;26:494–514.
- Zhang T, Smith G, Goldberg K. Compensatory grasping with parallel jaw gripper, algorithmic and computational robotics: new directions. A. K. Peters; 2001.
- Chen F, Goldberg K, Overmars MH, et al. Computing tolerance parameters for fixturing and feeding. Assembly Autom. 2002;22:163–172.
- Kehoe B, Berenson D, Goldberg K. Estimating part tolerance bounds based on adaptive cloud-based grasp planning with slip. IEEE Int. Conf. Autom Sci. Eng. 2012:1106–1113.
- Kato I. Robot hand. Kogyo-chosakai. 1981. In Japanese and not currently available.
- Watson PC. Remote center compliance system. US Patent 4098001; 1978.
- Hanafusa H, Asada H. A robot hand with elastic fingers and its application to assembly process. Brady M, et al., editor. Robot motion: planning and control. Boston, MA: MIT Press; 1982. p. 337–360.
- Hirose S, Umetani Y. The development of soft gripper for the versatile robot hand. Mech. Mach. Theory. 1978;13:351–359.
- Laliberte T, Gosselin C. Simulation and design of underactuated mechanical hands. Mech. Mach. Theory. 1998;33:39–57.
- Fukaya N, Toyama S, Asfour T, et al. Design of the TUAT/karlsruhe humanoid hand. In: Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems; Takamatsu; 2000.
- Catalano MG, Grioli G, Farnioli E, et al. Adaptive synergies for a humanoid robot hand. In: Proceedings of IEEE-RAS International Conference on Humanoid Robots; Osaka; 2012. pp. 7–14.
- Rojas J, Harada K, Onda H, et al. Towards snap sensing. Int. J. Mech. Autom. 2013;3:69–93.
- Rojas J, Harada K, Onda H, et al. A relative-change-based hierarchical taxonomy for cantilever-snap assembly verification. Proc. IEEE/RSJ Int. Conf. Intell. Rob. Syst. 2012;356–363.
- Rojas J, Harada K, Onda H, et al. Contextualized early failure characterization of cantilever snap assemblies. In: Proceedings of IEEE-RAS International Conference on Humanoid Robots. 2014. p. 380–387.
- Lynch KM. Locally controllable manipulation by stable pushing. IEEE Trans. Rob. Autom. 1999;15:318–327.
- Harada K, Nishiyama J, Murakami Y, et al. Pushing manipulation for multiple objects. Trans. ASME J. DSMC. 2006;128:422–427.
- Choreonoid. Available from: http://choreonoid.org.