Development of a small-scale spray-drying approach for amorphous solid dispersions (ASDs) screening in early drug development

References

• Amaro MI, Tajber L, Corrigan OI, Healy AM. 2011. Optimisation of spray drying process conditions for sugar nanoporous microparticles (NPMPs) intended for inhalation. Int J Pharm. 421:99–109.
   PubMedGoogle Scholar
• Ayad MH, Bonnet B, Quinton J, Leigh M, Poli SM. 2013. Amorphous solid dispersion successfully improved oral exposure of ADX71943 in support of toxicology studies. Drug Dev Ind Pharm. 39:1300–1305.
   PubMed Web of Science ®Google Scholar
• Baird JA, Taylor LS. 2012. Evaluation of amorphous solid dispersion properties using thermal analysis techniques. Adv Drug Deliv Rev. 64:396–421.
   PubMed Web of Science ®Google Scholar
• Brouwers J, Brewster ME, Augustijns P. 2009. Supersaturating drug delivery systems: the answer to solubility-limited oral bioavailability? J Pharm Sci. 98:2549–2572.
   PubMed Web of Science ®Google Scholar
• Cal K, Sollohub K. 2010. Spray drying technique. I: hardware and process parameters. J Pharm Sci. 99:575–586.
   PubMed Web of Science ®Google Scholar
• Chauhan H, Hui-Gu C, Atef E. 2013. Correlating the behavior of polymers in solution as precipitation inhibitor to its amorphous stabilization ability in solid dispersions. J Pharm Sci. 102:1924–1935.
   PubMed Web of Science ®Google Scholar
• Chen XQ, Stefanski K, Shen H, Huang C, Caporuscio C, Yang W, Lam P, Su C, Gudmundsson O, Hageman M. 2014. Oral delivery of highly lipophilic poorly water-soluble drugs: spray-dried dispersions to improve oral absorption and enable high-dose toxicology studies of a P2Y1 antagonist. J Pharm Sci. 103:3924–3931.
   PubMed Web of Science ®Google Scholar
• Chiang PC, Ran Y, Chou KJ, Cui Y, Sambrone A, Chan C, Hart R. 2012. Evaluation of drug load and polymer by using a 96-well plate vacuum dry system for amorphous solid dispersion drug delivery. AAPS PharmSciTech. 13:713–722.
   PubMed Web of Science ®Google Scholar
• Chowhan ZT. 1978. pH-Solubility Profiles or organic carboxylic acids and their salts. J Pharm Sci. 67:1257–1260.
   PubMed Web of Science ®Google Scholar
• Dai WG, Pollock-Dove C, Dong LC, Li S. 2008. Advanced screening assays to rapidly identify solubility-enhancing formulations: high-throughput, miniaturization and automation. Adv Drug Deliv Rev. 60:657–672.
   PubMed Web of Science ®Google Scholar
• Davis MT, Potter CB, Mohammadpour M, Albadarin AB, Walker GM. 2017. Design of spray dried ternary solid dispersions comprising itraconazole, soluplus and HPMCP: Effect of constituent compositions. Int J Pharm. 519:365–372.
   PubMedGoogle Scholar
• Demuth B, Nagy ZK, Balogh A, Vigh T, Marosi G, Verreck G, Van Assche I, Brewster ME. 2015. Downstream processing of polymer-based amorphous solid dispersions to generate tablet formulations. Int J Pharm. 486:268–286.
   PubMed Web of Science ®Google Scholar
• Djuris J, Nikolakakis I, Ibric S, Djuric Z, Kachrimanis K. 2013. Preparation of carbamazepine-Soluplus solid dispersions by hot-melt extrusion, and prediction of drug-polymer miscibility by thermodynamic model fitting. Eur J Pharm Biopharm. 84:228–237.
   PubMed Web of Science ®Google Scholar
• Duarte I, Santos JL, Pinto JF, Temtem M. 2015. Screening methodologies for the development of spray-dried amorphous solid dispersions. Pharm Res. 32:222–237.
   PubMed Web of Science ®Google Scholar
• Elsayed K, Lacor C. 2011. The effect of cyclone inlet dimensions on the flow pattern and performance. Appl Math Model. 35:1952–1968.
   Web of Science ®Google Scholar
• Engers D, Teng J, Jimenez-Novoa J, Gent P, Hossack S, Campbell C, Thomson J, Ivanisevic I, Templeton A, Byrn S, et al. 2010. A solid-state approach to enable early development compounds: selection and animal bioavailability studies of an itraconazole amorphous solid dispersion. J Pharm Sci. 99:3901–3922.
   PubMed Web of Science ®Google Scholar
• Gu B, Linehan B, Tseng YC. 2015. Optimization of the Buchi B-90 spray drying process using central composite design for preparation of solid dispersions. Int J Pharm. 491:208–217.
   PubMed Web of Science ®Google Scholar
• He Y, Ho C. 2015. Amorphous solid dispersions: utilization and challenges in drug discovery and development. J Pharm Sci. 104:3237–3258.
   PubMed Web of Science ®Google Scholar
• Huang Y, Dai WG. 2014. Fundamental aspects of solid dispersion technology for poorly soluble drugs. Acta Pharm Sin B. 4:18–25.
   PubMed Web of Science ®Google Scholar
• Kauppinen A, Broekhuis J, Grasmeijer N, Tonnis W, Ketolainen J, Frijlink HW, Hinrichs WLJ. 2018. Efficient production of solid dispersions by spray drying solutions of high solid content using a 3-fluid nozzle. Eur J Pharm Biopharm. 123:50–58.
   PubMed Web of Science ®Google Scholar
• Lebrun P, Krier F, Mantanus J, Grohganz H, Yang M, Rozet E, Boulanger B, Evrard B, Rantanen J, Hubert P. 2012. Design space approach in the optimization of the spray-drying process. Eur J Pharm Biopharm. 80:226–234.
   PubMed Web of Science ®Google Scholar
• Linn M, Collnot EM, Djuric D, Hempel K, Fabian E, Kolter K, Lehr CM. 2012. Soluplus® as an effective absorption enhancer of poorly soluble drugs in vitro and in vivo. Eur J Pharm Sci. 45:336–343.
   PubMed Web of Science ®Google Scholar
• Lipinski CA, Lombardo F, Dominy BW, Feeney PJ. 2012. Experimental and computational approaches to estimate solubility and permeability in drug discovery and development settings. Adv Drug Deliv Rev. 64:4–17.
   Web of Science ®Google Scholar
• Lohani S, Cooper H, Jin X, Nissley BP, Manser K, Rakes LH, Cummings JJ, Fauty SE, Bak A. 2014. Physicochemical properties, form, and formulation selection strategy for a biopharmaceutical classification system class II preclinical drug candidate. J Pharm Sci. 103:3007–3021.
   PubMed Web of Science ®Google Scholar
• Maas SG, Schaldach G, Littringer EM, Mescher A, Griesser UJ, Braun DE, Walzel PE, Urbanetz NA. 2011. The impact of spray drying outlet temperature on the particle morphology of mannitol. Powder Technol. 213:27–35.
   Web of Science ®Google Scholar
• Maury M, Murphy K, Kumar S, Shi L, Lee G. 2005. Effects of process variables on the powder yield of spray-dried trehalose on a laboratory spray-dryer. Eur J Pharm Biopharm. 59:565–573.
   PubMed Web of Science ®Google Scholar
• Miller DA, Gil M. 2012. Chapter spray-drying technology, spray-drying technology. In: Williams III RO, Watts AB, Miller DA, editors. Formulating Poorly Water Soluble Drugs. New-York: Springer-Verlag; p. 363–442.
   Google Scholar
• Ormes JD, Zhang D, Chen AM, Hou S, Krueger D, Nelson T, Templeton A. 2013. Design of experiments utilization to map the processing capabilities of a micro-spray dryer: particle design and throughput optimization in support of drug discovery. Pharm Dev Technol. 18:121–129.
   PubMed Web of Science ®Google Scholar
• Ousset A, Chavez PF, Meeus J, Robin F, Schubert MA, Somville P, Dodou K. 2018. Prediction of phase behavior of spray-dried amorphous solid dispersions: assessment of thermodynamic models, standard screening methods and a novel atomization screening device with regard to prediction accuracy. Pharmaceutics. 10:29.
   Web of Science ®Google Scholar
• Parikh T, Gupta SS, Meena AK, Vitez I, Mahajan N, Serajuddin ATM. 2015. Application of film-casting technique to investigate drug-polymer miscibility in solid dispersion and hot-melt extrudate. J Pharm Sci. 104:2142–2152.
   PubMed Web of Science ®Google Scholar
• Patel BB, Patel JK, Chakraborty S, Shukla D. 2015. Revealing facts behind spray dried solid dispersion technology used for solubility enhancement. Saudi Pharm J. 23:352–365.
   PubMed Web of Science ®Google Scholar
• Patel S, Kou X, Hou HH, Huang YB, Strong JC, Zhang GGZ, Sun CC. 2017. Mechanical properties and tableting behavior of amorphous solid dispersions. J Pharm Sci. 106:217–223.
   PubMed Web of Science ®Google Scholar
• Paterson AHJ, Brooks GF, Bronlund JE, Foster KD. 2005. Development of stickiness in amorphous lactose at constant T − Tg levels. Int Dairy J. 15:513–519.
   Web of Science ®Google Scholar
• Patnaik S. 2016. Novel nanoformulations for enhanced oral bioavailability of some poorly water soluble non steroidal anti inflammatory drugs. Andhra Pradesh: Sri Sathya Sai Institute of Higher Learning.
   Google Scholar
• Paudel A, Worku ZA, Meeus J, Guns S, Van den Mooter G. 2013. Manufacturing of solid dispersions of poorly water soluble drugs by spray drying: formulation and process considerations. Int J Pharm. 453:253–284.
   PubMed Web of Science ®Google Scholar
• ProCept. 2014. ProCept Information Brochure Spray dryer. Zelzate, Belgium. http://www.procept.be/spray-dryer-chiller [last accessed 17 October 2018].
   Google Scholar
• Puppolo MM, Hughey JR, Dillon T, Storey D, Jansen-Varnum S. 2017. Biomimetic dissolution: a tool to predict amorphous solid dispersion performance. AAPS Pharm Sci Tech. 18:2841–2853.
   PubMed Web of Science ®Google Scholar
• Rumondor AC, Stanford LA, Taylor LS. 2009. Effects of polymer type and storage relative humidity on the kinetics of felodipine crystallization from amorphous solid dispersions. Pharm Res. 26:2599–2606.
   PubMed Web of Science ®Google Scholar
• Schmid K, Arpagaus C, Friess W. 2011. Evaluation of the nano spray dryer B-90 for pharmaceutical applications. Pharm Dev Technol. 16:287–294.
   PubMed Web of Science ®Google Scholar
• Shamma RN, Basha M. 2013. Soluplus®: A novel polymeric solubilizer for optimization of Carvedilol solid dispersions: Formulation design and effect of method of preparation. Powder Technol. 237:406–414.
   Web of Science ®Google Scholar
• Singh A, Van den Mooter G. 2016. Spray drying formulation of amorphous solid dispersions. Adv Drug Deliv Rev. 100:27–50.
   PubMed Web of Science ®Google Scholar
• Six K, Leuner C, Dressman J, Verreck G, Peeters J, Blaton N, Augustijns P, Kinget R, Van den Mooter G. 2002. Thermal properties of Hot-stage extrudates of Itraconazole and Eudragit E100 Phase separation and polymorphism. J Therm Anal Calorim. 68:591–601.
   Web of Science ®Google Scholar
• Six K, Verreck G, Peeters J, Augustijns P, Kinget R, Van den Mooter G. 2001. Characterization of glassy itraconazole: a comparative study of its molecular mobility below Tg with that of structural analogues using MTDSC. Int J Pharm. 213:163–173.
   PubMed Web of Science ®Google Scholar
• Sun DD, Wen H, Taylor LS. 2016. Non-sink dissolution conditions for predicting product quality and in vivo performance of supersaturating drug delivery systems. J Pharm Sci. 105:2477–2488.
   PubMed Web of Science ®Google Scholar
• Teja SB, Patil SP, Shete G, Patel S, Bansal AK. 2013. Drug-excipient behavior in polymeric amorphous solid dispersions. J Excipients and Food Chem. 4:70–93.
   Google Scholar
• Thakral NK, Ray AR, Bar-Shalom D, Eriksson AH, Majumdar DK. 2012. Soluplus-solubilized citrated camptothecin-a potential drug delivery strategy in colon cancer. AAPS PharmSciTech. 13:59–66.
   PubMed Web of Science ®Google Scholar
• Tonon RV, Brabet C, Hubinger MD. 2008. Influence of process conditions on the physicochemical properties of açai (Euterpe oleraceae Mart.) powder produced by spray drying. J Food Eng. 88:411–418.
   Web of Science ®Google Scholar
• Ueda K, Higashi K, Yamamoto K, Moribe K. 2014. The effect of HPMCAS functional groups on drug crystallization from the supersaturated state and dissolution improvement. Int J Pharm. 464:205–213.
   PubMed Web of Science ®Google Scholar
• Van Bockstal PJ, Mortier S, Corver J, Nopens I, Gernaey KV, De Beer T. 2018. Global sensitivity analysis as good modelling practices tool for the identification of the most influential process parameters of the primary drying step during freeze-drying. Eur J Pharm Biopharm. 123:108–116.
   PubMed Web of Science ®Google Scholar
• Van Daele T, Gernaey KV, Ringborg RH, Börner T, Heintz S, Van Hauwermeiren D, Grey C, Krühne U, Adlercreutz P, Nopens I. 2017. Application of iterative robust model-based optimal experimental design for the calibration of biocatalytic models. Biotechnol Prog. 33:1278–1293.
   PubMed Web of Science ®Google Scholar
• Vasconcelos T, Sarmento B, Costa P. 2007. Solid dispersions as strategy to improve oral bioavailability of poor water soluble drugs. Drug Discov Today. 12:1068–1075.
   PubMed Web of Science ®Google Scholar
• Vicente J, Pinto J, Menezes J, Gaspar F. 2013. Fundamental analysis of particle formation in spray drying. Powder Technol. 247:1–7.
   Web of Science ®Google Scholar
• Wang B, Xu DL, Chu KW, Yu AB. 2006. Numerical study of gas–solid flow in a cyclone separator. Appl Math Model. 30:1326–1342.
   Web of Science ®Google Scholar