1,199
Views
36
CrossRef citations to date
0
Altmetric
Original Articles

Viscoelastic Characterization of Sage Seed Gum

, &
Pages 1604-1619 | Received 23 Nov 2010, Accepted 27 Jun 2011, Published online: 24 May 2013

REFERENCES

  • Will, R.; Loechner, U.; Yokose, K. Hydrocolloids. CEH report. (accessed April 12, 2010), 2010 http://www.sriconsulting.com/CEH/Public/Reports/582.7000 (http://www.sriconsulting.com/CEH/Public/Reports/582.7000)
  • Williams , P.A. and Phillips , G.O. 2000 . “ Introduction to good hydrocolloids ” . In Handbook of Hydrocolloids , Edited by: Phillips , G.O. and Williams , P.A. 1 – 19 . Cambridge , , UK : Woodhead Publishing .
  • Razavi , S.M.A. , Farhoosh , R. and Bostan , A. 2007 . Functional properties of hydrocolloid extract of some Iranian seeds. Research project No. 1475 , Iran : Unpublished report. Ferdowsi University of Mashhad .
  • Koocheki , A. , Mortazavi , S.A. , Shahidi , F. , Razavi , S.M.A. , Kadkhodaee , R. and Milani , J.M. 2010 . Optimization of mucilage extraction from Qodume Shirazi seed (Alyssum homolocarpum) using response surface methodology . Journal of Food Process Engineering , 33 ( 5 ) : 861 – 882 .
  • Koocheki , A. , Mortazavi , S.A. , Shahidi , F. , Razavi , S.M.A. and Taherian , A.R. 2009 . Rheological properties of mucilage extracted from Alyssum homalocarpum seed as a new source of thickening agent . Journal of Food Engineering , 91 : 490 – 496 .
  • Koocheki , A. and Razavi , S.M.A. 2009 . Effect of concentration and temperature on flow properties of Alyssum homolocarpum seed gum solutions: Assessment of time dependency and thixotropy . Food Biophysics , 4 : 353 – 364 .
  • Razavi , S.M.A. , Emadzadeh , B. and Zahedi , Y. June 15–19 2008 . “ Comparisons of different methods for measuring yield stress in selected hydrocolloids ” . In Proceedings of 9th International Hydrocolloids Conference (IHC) June 15–19 , Singapore
  • Razavi , S.M.A. and Kardzhiyan , H. 2009 . Flow properties and thixotropy of selected hydrocolloids: Experimental and modeling studies . Food Hydrocolloids , 23 ( 3 ) : 908 – 912 .
  • Razavi , S.M.A. , Mohammadi Moghaddam , T. and Amini , A.M. 2009 . Physico-mechanic and chemical properties of Balangu seeds (Lallemantia royleana) . International Journal of Food Engineering , 4 ( 5 ) : 1 – 12 .
  • Koocheki , A. , Taherian , A.R. , Razavi , S.M.A. and Bostan , A. 2009 . Response surface methodology for optimization of extraction yield, viscosity, hue and emulsion stability of mucilage extracted from Leidium perfoliatum seeds . Food Hydrocolloids , 23 : 2369 – 2379 .
  • Karazhiyan , H. , Razavi , S.M.A. and Phillips , G.O. 2011 . Extraction optimization of a hydrocolloid extract from cress seed (Lepidium sativum) using response surface methodology . Food Hydrocolloids , 25 : 915 – 920 .
  • Karazhiyan , H. , Razavi , S.M.A. , Phillips , G.O. , Fang , Y. , Al-Assaf , S. , Nishinari , K. and Farhoosh , R. 2009 . Rheological properties of Lepidium sativum hydrocolloid extract as a function of concentration, temperature and time . Food Hydrocolloids , 23 : 2062 – 2068 .
  • Razavi , S.M.A. , Mortazavi , S.A. , Matia-Merino , L. , Hosseini-Parvar , S.H. , Motamedzadegan , A. and Khanipour , E. 2009 . Optimization study of gum extraction from Basil seeds (Ocimum basilicum L.) . using response surface methodology. International Journal of Food Science and Technology , 44 : 1755 – 1762 .
  • Razavi , S.M.A. , Bostan , A. and Rezaie , M. 2010 . Image processing and physico-mechanical properties of Basil seed (Ocimum Basilicum) . Journal of Food Process Engineering , 33 ( 1 ) : 51 – 64 .
  • Hosseini-Parvar , S.H. , Matia-Merino , L. , Goh , K.K.T. , Razavi , S.M.A. and Mortazavi , S.A. 2010 . Steady shear flow behavior of gum extracted from Ocimum basilicum L. seed: Effect of concentration and temperature . Journal of Food Engineering , 101 : 236 – 241 .
  • Razavi , S.M.A. , Mahdavian Mehr , H. and Zahedi , Y. 2010 . Some engineering properties of Plantago major L. (Barhang) seed . Iranian Food Science and Technology Research Journal , 5 ( 2 ) : 10 – 17 .
  • Razavi , S.M.A. , Mahdavian Mehr , H. and Zahedi , Y. 2010 . Optimization of gum extraction conditions from Plantago major L. using the response surface method . Journal of Herbs, Spices and Medicinal Plants , Submitted manuscript
  • Bostan , A. , Razavi , S.M.A. and Farhoosh , R. 2010 . Optimization of hydrocolloid extraction from wild sage seed (Salvia macrosiphon) using response surface methodology . International Journal of Food Properties , 13 ( 6 ) : 1380 – 1392 .
  • Razavi , S.M.A. , Mahdavian Mehr , H. and Zahedi , Y. 2013 . Optimization of gum extraction conditions from Plantago major L. using the response surface method . Electronic Journal of Environmental, Agricultural and Food Chemistry , (Accepted paper)
  • Razavi , S.M.A. , Taheri , H. and Quinchia , L.A. 2011 . Steady shear flow properties of wild sage (Salvia macrosiphon) seed gum as a function of concentration and temperature . Food Hydrocolloids , 25 ( 3 ) : 451 – 458 .
  • Bourbon , A.L. , Pinherio , A.C. , Ribeiro , C. , Miranda , C. , Maia , J.M. , Teixeria , J.A. and Vicente , A.A. 2010 . Characterization of galactomannans extracted from seeds of Gleditsia triacanthos and Sophora japonica through shear and extensional rheology: Comparison with guar gum and locust bean gum . Food Hydrocolloids , 24 : 184 – 192 .
  • Koop , H.S. , Praes , C.E.O. , Reicher , F. , Petkowicz , C.L.O. and Silveria , J.L.M. 2009 . Rheological behavior of gel xanthan with seed galactomanan: Effect of hydroalcoholic-ascorbic acid . Materials Science and Engineering C , 29 : 559 – 563 .
  • Nwokocha , L.M. and Williams , P.A. 2009 . Isolation and rheological characterization of Mucuna flagellipes seed gum . Food Hydrocolloids , 23 : 1394 – 1397 .
  • Wu , Y. , Cui , W. , Eskin , N.A.M. and Goff , H.D. 2009 . An investigation of four commercial galactomannans on their emulsion and rheological properties . Food Research International , 42 : 1141 – 1146 .
  • Michon , C. , Chapius , C. , Langendroff , V. , Boulenguer , P. and Cuvelier , G. 2004 . Strain hardening properties of physical weak gels of biopolymers . Food Hydrocolloids , 18 : 999 – 1005 .
  • Brummer , Y. , Cui , W. and Wang , Q. 2003 . Extraction, purification and physicochemical characterization of fenugreek gum . Food Hydrocolloids , 17 : 229 – 236 .
  • Martin , S. , Freitas , R.A. , Obayashi , E. and Sierakowski , M.R. 2003 . Physico–chemical aspects of galactoxyloglucan from the seeds of Hymenaea courbaril and its tetraborate complex . Carbohydrate Polymers , 54 : 287 – 295 .
  • Oblonsek , M. , Sostar-Turk , S. and Lapasin , R. 2003 . Rheological studies of concentrated guar gum . Rheologica Acta , 42 : 491 – 499 .
  • Holser , R. , Carriere , C.J. and Abbott , T.P. 2000 . Rheological properties of lesquerella gum fractions recovered by aqueous extraction . Industrial Crops and Products , 12 : 63 – 69 .
  • Steffe , J.F. 1996 . Rheological Methods in Food Process Engineering , Second , East Lansing, MI : Freeman Press . Edition
  • Dolz , M. , Hernandez , M.J. and Delegido , J. 2008 . Creep and recovery experimental investigation of low oil content food emulsions . Food Hydrocolloids , 22 : 421 – 427 .
  • Mezger , T.G. 2002 . “ Rotational tests ” . In The Rheology Handbook: For Users of Rotational and Oscillatory Rheometers; Zorll, E , 55 – 68 . Hannover : Vincentz Verlag .
  • Clark , A.K. and Ross-Murphy , S.B. 1987 . Structural and mechanical properties of biopolymer gels . Advances in Polymer Sciences , 83 : 57 – 192 .
  • Farahnaky , A. , Askari , H. , Majzoobi , M. and Gh , Mesbahi . 2010 . The impact of concentration, temperature and pH on dynamic rheology of psyllium gels . Journal of Food Engineering , 100 : 294 – 301 .
  • Wang , B. , Wang , L. , Li , D. , Ozkan , N. , Li , S. and Mao , Z. 2009 . Rheological properties of waxy maize starch and xanthan gum mixtures in the presence of sucrose . Carbohydrate Polymer , 77 : 472 – 481 .
  • Yamazaki , E. , Kurita , O. and Matsumura , Y. 2009 . High viscosity of hydrocolloid from leaves of Corchorus olitorius L . Food Hydrocolloids , 23 ( 3 ) : 655 – 660 .
  • Fitzsimons , S.M. , Tobin , J.T. and Morris , E.R. 2008 . Synergistic binding of konjac gluco-mannan to xanthan on mixing at room temperature . Food Hydrocolloids , 22 : 485 – 491 .
  • Rodriguez-Hernandez , A.L. , Durand , S. , Garnier , C. , Tecante , A. and Doublier , J.L. 2003 . Rheology-structure properties of gellan systems: Evidence of network formation at low gellan concentration . Food Hydrocolloids , 17 : 621 – 628 .
  • Fernandez , P.B. , Goncalves , M.P. and Doublier , J.L. 1991 . A rheological characterization of kappa-carrageenan/galactomanan gels: A comparison of locust bean gum samples . Carbohydrate Polymers , 16 : 253 – 274 .
  • Ross-Murphy , S.B. , Morris , V.J. and Morris , E.R. 1983 . Molecular viscoelasticity of xanthan polysaccharide . Faraday Symposia the Chemistry Society , 18 : 115 – 129 .
  • Chenlo , F. , Moreira , R. and Silva , C. 2010 . Rheological behavior of aqueous systems of tragacanth and guar gums with storage time . Journal of Food Engineering , 96 : 107 – 113 .
  • Rao , M.A. 1999 . “ Rheological behavior of processed fluid and semisolid foods ” . In Rheology of Fluid and Semisolid Foods: Principles and Applications; Rao, M , 153 – 218 . USA : Aspen Publishers, Inc .
  • Ross-Murphy , S.B. 1984 . “ Rheological methods ” . In Biophysical Methods in Food Research; Chan, H.W.S , 138 – 199 . London : Blackwell Scientific Publication .
  • Ferry , J.D. 1948 . Mechanical properties of substances of high molecular weight IV. Rigidities of gelatin gels: Dependence on concentration, temperature and molecular weight . Journal of American Chemistry Society , 70 : 2244 – 2249 .
  • Koltisko , B. , Keller , A. , Litt , M. , Baer , E. and Hiltner , A. 1986 . Mechanical properties of thermoreversible atactic polystyrene gels . Macromolecules , 19 : 1207 – 1212 .
  • Mao , C.F. and Rwei , S.P. 2006 . Cascade analysis of mixed gels of xanthan and locust bean gum . Polymer , 47 : 7980 – 7987 .
  • Ross-Murphy , S.B. and McEvoy , H. 1986 . Fundamentals of hydrogels and gelation . Britain Polymer Journal , 18 ( 1 ) : 2 – 7 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.