Citations (172)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (70)
Guodong Huang & Yacob Khojasteh. (2024) Using an incentive-compatibility due-date quotation to improve the performance for one-of-a-kind production shop floors controlled by load-based pull systems. International Journal of Production Research 62:4, pages 1072-1091.
Read now
Read now
Nuno O. Fernandes, Matthias Thürer & Mark Stevenson. (2023) On the integration of card-allocation and dispatching decisions in POLCA systems: an assessment by simulation. Production Planning & Control 34:13, pages 1225-1232.
Read now
Read now
Matthias Thürer, Lin Ma, Mark Stevenson & Christoph Roser. (2022) Bottleneck detection in high-variety make-to-Order shops with complex routings: an assessment by simulation. Production Planning & Control 33:15, pages 1481-1492.
Read now
Read now
Matthias Thürer & Mark Stevenson. (2022) Order release, dispatching and resource assignment in multiple resource-constrained job shops: an assessment by simulation. International Journal of Production Research 60:12, pages 3669-3681.
Read now
Read now
Nuno O. Fernandes, Matthias Thürer & Mark Stevenson. (2022) Direct Workload Control: simplifying continuous order release. International Journal of Production Research 60:4, pages 1424-1437.
Read now
Read now
Hubert Missbauer & Reha Uzsoy. (2022) Order release in production planning and control systems: challenges and opportunities. International Journal of Production Research 60:1, pages 256-276.
Read now
Read now
Philipp Neuner & Stefan Haeussler. (2021) Rule based workload control in semiconductor manufacturing revisited. International Journal of Production Research 59:19, pages 5972-5991.
Read now
Read now
Nuno O. Fernandes, Matthias Thürer, Mark Stevenson & Sílvio Carmo-Silva. (2020) Lot synchronization in make-to-order shops with order release control: an assessment by simulation. International Journal of Production Research 58:21, pages 6724-6738.
Read now
Read now
Matthias Thürer, Haiwen Zhang, Mark Stevenson, Federica Costa & Lin Ma. (2020) Worker assignment in dual resource constrained assembly job shops with worker heterogeneity: an assessment by simulation. International Journal of Production Research 58:20, pages 6336-6349.
Read now
Read now
Luis Martins, Maria L. R. Varela, Nuno O. Fernandes, Sílvio Carmo–Silva & José Machado. (2020) Literature review on autonomous production control methods. Enterprise Information Systems 14:8, pages 1219-1231.
Read now
Read now
Stefan Haeussler & Pia Netzer. (2020) Comparison between rule- and optimization-based workload control concepts: a simulation optimization approach. International Journal of Production Research 58:12, pages 3724-3743.
Read now
Read now
Matthias Thürer & Mark Stevenson. (2020) The use of finite loading to guide short-term capacity adjustments in make-to-order job shops: an assessment by simulation. International Journal of Production Research 58:12, pages 3554-3569.
Read now
Read now
Matthias Thürer, Mark Stevenson, Martin J. Land & Larry D. Fredendall. (2019) On the combined effect of due date setting, order release, and output control: an assessment by simulation. International Journal of Production Research 57:6, pages 1741-1755.
Read now
Read now
Matthias Thürer, Mark Stevenson & Paolo Renna. (2019) Workload control in dual-resource constrained high-variety shops: an assessment by simulation. International Journal of Production Research 57:3, pages 931-947.
Read now
Read now
Pedro L. Gonzalez-R, Marcos Calle & Jose L. Andrade-Pineda. (2018) Job shop management of products under internal lifespan and external due date. International Journal of Production Research 56:16, pages 5457-5474.
Read now
Read now
Nuno O. Fernandes, Tiago Martins & Sílvio Carmo-Silva. (2018) Improving materials flow through autonomous production control. Journal of Industrial and Production Engineering 35:5, pages 319-327.
Read now
Read now
Thomas Hutter, Stefan Haeussler & Hubert Missbauer. (2018) Successful implementation of an order release mechanism based on workload control: a case study of a make-to-stock manufacturer. International Journal of Production Research 56:4, pages 1565-1580.
Read now
Read now
Kaustav Kundu, Matteo Rossini & Alberto Portioli-Staudacher. (2018) Analysing the impact of uncertainty reduction on WLC methods in MTO flow shops. Production & Manufacturing Research 6:1, pages 328-344.
Read now
Read now
Matthias Thürer, Martin J. Land, Mark Stevenson & Lawrence D. Fredendall. (2017) On the integration of due date setting and order release control. Production Planning & Control 28:5, pages 420-430.
Read now
Read now
Matthias Thürer & Mark Stevenson. (2016) Card-based delivery date promising in pure flow shops with order release control. International Journal of Production Research 54:22, pages 6798-6811.
Read now
Read now
Haoyun Yan, Mark Stevenson, Linda C. Hendry & Martin J. Land. (2016) Load-Oriented Order Release (LOOR) revisited: bringing it back to the state of the art. Production Planning & Control 27:13, pages 1078-1091.
Read now
Read now
Matthias Thürer & Mark Stevenson. (2016) Workload control in job shops with re-entrant flows: an assessment by simulation. International Journal of Production Research 54:17, pages 5136-5150.
Read now
Read now
Matthias Thürer, Mark Stevenson & Ting Qu. (2016) Job sequencing and selection within workload control order release: an assessment by simulation. International Journal of Production Research 54:4, pages 1061-1075.
Read now
Read now
Matthias Thürer, Mark Stevenson & Ting Qu. (2015) Simple subcontracting rules for make-to-order shops with limited subcontractor capacity: an assessment by simulation. Production Planning & Control 26:13, pages 1145-1161.
Read now
Read now
Mark Stevenson & Markus Vanharanta. (2015) The effects of managerial decision making behaviour and order book size on workload control system implementation in Make-To-Order companies. Production Planning & Control 26:2, pages 97-115.
Read now
Read now
Matthias Thürer, Ting Qu, Mark Stevenson, Thomas Maschek & Moacir Godinho Filho. (2014) Continuous workload control order release revisited: an assessment by simulation. International Journal of Production Research 52:22, pages 6664-6680.
Read now
Read now
Matthias Thürer, Cristovao Silva, Mark Stevenson & Martin Land. (2014) Controlled order release: a performance assessment in job shops with sequence-dependent set-up times. Production Planning & Control 25:7, pages 603-615.
Read now
Read now
Martin Land, Mark Stevenson & Matthias Thürer. (2014) Integrating load-based order release and priority dispatching. International Journal of Production Research 52:4, pages 1059-1073.
Read now
Read now
Nuno O. Fernandes, Martin J. Land & Sílvio Carmo-Silva. (2014) Workload control in unbalanced job shops. International Journal of Production Research 52:3, pages 679-690.
Read now
Read now
Matthias Thürer, Moacir Godinho Filho & Mark Stevenson. (2013) Coping with finite storage space in job shops through order release control: an assessment by simulation. International Journal of Computer Integrated Manufacturing 26:9, pages 830-838.
Read now
Read now
Matthias Thürer, Mark Stevenson, Cristovao Silva & Martin Land. (2013) Towards an Integrated Workload Control (WLC) Concept: The Performance of Due Date Setting Rules in Job Shops with Contingent Orders. International Journal of Production Research 51:15, pages 4502-4516.
Read now
Read now
Matthias Thürer, Mark Stevenson, Cristovao Silva, Martin Land & Moacir
Godinho Filho. (2013) Workload control and order release in two-level multi-stage job shops: an assessment by simulation. International Journal of Production Research 51:3, pages 869-882.
Read now
Read now
Matthias Thürer, Cristovao Silva, Mark Stevenson & Martin Land. (2012) Improving the applicability of workload control (WLC): the influence of sequence-dependent set-up times on workload controlled job shops. International Journal of Production Research 50:22, pages 6419-6430.
Read now
Read now
Matthias Thürer, George Huang, Mark Stevenson, Cristovao Silva & Moacir
Godinho Filho. (2012) The performance of Due Date setting rules in assembly and multi-stage job shops: an assessment by simulation. International Journal of Production Research 50:20, pages 5949-5965.
Read now
Read now
Matthias Thürer, Mark Stevenson, Cristovao Silva & George Huang. (2012) The application of workload control in assembly job shops: an assessment by simulation. International Journal of Production Research 50:18, pages 5048-5062.
Read now
Read now
Alberto Portioli-Staudacher & Marco Tantardini. (2012) A lean-based ORR system for non-repetitive manufacturing. International Journal of Production Research 50:12, pages 3257-3273.
Read now
Read now
G.D. Soepenberg, M.J. Land & G.J.C. Gaalman. (2012) Workload control dynamics in practice. International Journal of Production Research 50:2, pages 443-460.
Read now
Read now
Matthias Thürer, Mark Stevenson & Cristovao Silva. (2011) Three decades of workload control research: a systematic review of the literature. International Journal of Production Research 49:23, pages 6905-6935.
Read now
Read now
Matthias Thürer, Cristovao Silva & Mark Stevenson. (2011) Optimising workload norms: the influence of shop floor characteristics on setting workload norms for the workload control concept. International Journal of Production Research 49:4, pages 1151-1171.
Read now
Read now
H.L. Lu, George Q. Huang & H.D. Yang. (2011) Integrating order review/release and dispatching rules for assembly job shop scheduling using a simulation approach. International Journal of Production Research 49:3, pages 647-669.
Read now
Read now
Adil Baykasoğlu & Mustafa Göçken. (2011) A simulation based approach to analyse the effects of job release on the performance of a multi-stage job-shop with processing flexibility. International Journal of Production Research 49:2, pages 585-610.
Read now
Read now
Matthias Thürer, Cristovao Silva & Mark Stevenson. (2010) Workload control release mechanisms: from practice back to theory building. International Journal of Production Research 48:12, pages 3593-3617.
Read now
Read now
M. Ebadian, M. Rabbani, S.A. Torabi & F. Jolai. (2009) Hierarchical production planning and scheduling in make-to-order environments: reaching short and reliable delivery dates. International Journal of Production Research 47:20, pages 5761-5789.
Read now
Read now
James C. Chen, Yang-Chih Fan & Chia-Wen Chen. (2009) Capacity requirements planning for twin Fabs of wafer fabrication. International Journal of Production Research 47:16, pages 4473-4496.
Read now
Read now
M.R.A. Moreira & R.A.F.S. Alves. (2009) A methodology for planning and controlling workload in a job-shop: a four-way decision-making problem. International Journal of Production Research 47:10, pages 2805-2821.
Read now
Read now
M. X. Weng, Z. Wu, G. Qi & L. Zheng. (2008) Multi-agent-based workload control for make-to-order manufacturing. International Journal of Production Research 46:8, pages 2197-2213.
Read now
Read now
P. Rogers & A. Nandi. (2007) Judicious order acceptance and order release in make-to-order manufacturing systems. Production Planning & Control 18:7, pages 610-625.
Read now
Read now
P. Henrich, M. J. Land & G. J. C. Gaalman. (2007) Semi-interchangeable machines: implications for workload control. Production Planning & Control 18:2, pages 91-104.
Read now
Read now
Peter Henrich
, Martin Land, Gerard Gaalman & Durk-Jouke Van Der Zee. (2004) Reducing feedback requirements of workload control. International Journal of Production Research 42:24, pages 5235-5252.
Read now
Read now
Bryan Hosack, Farzad Mahmoodi & CharlesT. Mosier. (2003) A comparison of deadlock avoidance policies in flexible manufacturing systems. International Journal of Production Research 41:13, pages 2991-3006.
Read now
Read now
Brian Kingsman & Linda Hendry. (2002) The relative contributions of input and output controls on the performance of a workload control system in Make-To-Order companies. Production Planning & Control 13:7, pages 579-590.
Read now
Read now
J. W. M Bertrand & H. P. G. Van Ooijen. (2002) Workload based order release and productivity: a missing link. Production Planning & Control 13:7, pages 665-678.
Read now
Read now
S. T Enns & Myriam Prongué Costa. (2002) The effectiveness of input control based on aggregate versus bottleneck work loads. Production Planning & Control 13:7, pages 614-624.
Read now
Read now
Jan-Wilhelm Breithaupt, Martin Land & Peter Nyhuis. (2002) The workload control concept: theory and practical extensions of Load Oriented Order Release. Production Planning & Control 13:7, pages 625-638.
Read now
Read now
R Cigolini & A Portioli-Staudacher. (2002) An experimental investigation on workload limiting methods within ORR policies in a job shop environment. Production Planning & Control 13:7, pages 602-613.
Read now
Read now
S. Muda & L. Hendry. (2002) Proposing a world-class manufacturing concept for the make-to-order sector. International Journal of Production Research 40:2, pages 353-373.
Read now
Read now
L. D. FREDENDALL, S. A. MELNYK & G. RAGATZ. (1996) Information and scheduling in a dual resource constrained job shop. International Journal of Production Research 34:10, pages 2783-2802.
Read now
Read now
S. T. ENNS. (1995) An integrated system for controlling shop loading and work flow. International Journal of Production Research 33:10, pages 2801-2820.
Read now
Read now
R. PIPLANI & J. TALAVAGE. (1995) Launching and dispatching strategies for multi-criteria control of closed manufacturing systems with flexible routeing capability. International Journal of Production Research 33:8, pages 2181-2196.
Read now
Read now
P. S. PARK & G. J. SALEGNA. (1995) Load smoothing with feedback in a bottleneck job shop. International Journal of Production Research 33:6, pages 1549-1568.
Read now
Read now
L. D. FREDENDALL & S. A. MELNYK. (1995) Assessing the impact of reducing demand variance through improved planning on the performance of a dual resource constrained job shop. International Journal of Production Research 33:6, pages 1521-1534.
Read now
Read now
S. LINGAYAT, J. MITTENTHAL & R. M. O'KEEFE. (1995) An order release mechanism for a flexible flow system. International Journal of Production Research 33:5, pages 1241-1256.
Read now
Read now
L. C. HENDRY & S. K. WONG. (1994) Alternative order release mechanisms: a comparison by simulation. International Journal of Production Research 32:12, pages 2827-2842.
Read now
Read now
REHA UZSOY, CHUNG-YEE LEE & LOUISA. MARTIN-VEGA. (1994) A REVIEW OF PRODUCTION PLANNING AND SCHEDULING MODELS IN THE SEMICONDUCTOR INDUSTRY PART II: SHOP-FLOOR CONTROL. IIE Transactions 26:5, pages 44-55.
Read now
Read now
S. A. MELNYK, K. C. TAN, D. R. DENZLER & L. FREDENDALL. (1994) Evaluating variance control, order review/release and dispatching: a regression analysis. International Journal of Production Research 32:5, pages 1045-1061.
Read now
Read now
HÜSEYIN SARPER. (1994) Evaluation of simple dispatching rules for dynamic single-machine earliness/tardiness problem. Production Planning & Control 5:2, pages 185-192.
Read now
Read now
G. D. SCUDDER, T. R. HOFFMANN & T. R. ROHLEDER. (1993) Scheduling with forbidden early shipments: alternative performance criteria and conditions. International Journal of Production Research 31:10, pages 2287-2305.
Read now
Read now
CHING-JONG LIAO. (1992) Optimal release time on a stochastic single machine. International Journal of Systems Science 23:10, pages 1693-1701.
Read now
Read now
IZAK DUENYAS & WALLACEJ. HOPP. (1992) CONWIP ASSEMBLY WITH DETERMINISTIC PROCESSING AND RANDOM OUTAGES. IIE Transactions 24:4, pages 97-109.
Read now
Read now
FARZAD MAHMOODI & KEVINJ. DOOLEY. (1992) Group scheduling and order releasing: review and foundations for research. Production Planning & Control 3:1, pages 70-80.
Read now
Read now
Articles from other publishers (102)
Lei Yue, Qing Xu, Hao Wang, Mudassar Rauf & Jabir Mumtaz. (2024) Simulation‐based optimisation for order release of printed circuit board workshop with process switching constraints. IET Collaborative Intelligent Manufacturing 6:1.
Crossref
Crossref
Steven Alexander Melnyk, Matthias Thürer, Constantin Blome, Tobias Schoenherr & Stefan Gold. (2023) (Re)-discovering simulation as a critical element of OM/SCM research: call for research. International Journal of Operations & Production Management.
Crossref
Crossref
Mingze Yuan, Lin Ma, Ting Qu & Matthias Thürer. (2023) Shop floor dispatching with variable urgent operations based on Workload Control: An assessment by simulation. IET Collaborative Intelligent Manufacturing 5:3.
Crossref
Crossref
Stefan Haeussler, Philipp Neuner & Matthias Thürer. (2022) Balancing earliness and tardiness within workload control order release: an assessment by simulation. Flexible Services and Manufacturing Journal 35:2, pages 487-508.
Crossref
Crossref
Paolo Renna. (2023) Switch-Off Policies in Job Shop Controlled by Workload Control Concept. Applied Sciences 13:8, pages 5210.
Crossref
Crossref
T.A. Arno Kasper, Martin J. Land & Ruud H. Teunter. (2023) Non-hierarchical work-in-progress control in manufacturing. International Journal of Production Economics 257, pages 108768.
Crossref
Crossref
T.A. Arno Kasper, Martin J. Land & Ruud H. Teunter. (2023) Towards System State Dispatching in High‐Variety Manufacturing. Omega 114, pages 102726.
Crossref
Crossref
Juliana Keiko Sagawa, Allan Freitas Oliveira, Gašper Mušič, Martin J. Land & Arthur Sarro Maluf. (2022) Smart workload input-output control of production systems: A proof of concept. European Journal of Operational Research.
Crossref
Crossref
Davide Mezzogori, Giovanni Romagnoli & Francesco Zammori. (2022) A new perspective on Workload Control by measuring operating performances through an economic valorization. Scientific Reports 12:1.
Crossref
Crossref
Fernando José Gómez Paredes, Moacir Godinho Filho, Matthias Thürer, Nuno O. Fernandes & Charbel José Chiappeta Jabbour. (2020) Factors for choosing production control systems in make-to-order shops: a systematic literature review. Journal of Intelligent Manufacturing 33:3, pages 639-674.
Crossref
Crossref
Federica Costa & Alberto Portioli-Staudacher. (2021) Labor flexibility integration in workload control in Industry 4.0 era. Operations Management Research 14:3-4, pages 420-433.
Crossref
Crossref
Matthias Thürer, Nuno O. Fernandes & Mark Stevenson. (2020) Material Flow Control in High‐Variety Make‐to‐Order Shops: Combining COBACABANA and POLCA. Production and Operations Management 29:9, pages 2138-2152.
Crossref
Crossref
Paolo Renna. (2020) A Dynamic Adjusted Aggregate Load Method to Support Workload Control Policies. Applied Sciences 10:10, pages 3497.
Crossref
Crossref
Hubert Missbauer & Reha UzsoyHubert Missbauer & Reha Uzsoy. 2020. Production Planning with Capacitated Resources and Congestion. Production Planning with Capacitated Resources and Congestion
47
75
.
Rashmi Singh & M Mathirajan. (2019) Investigation of different inputs and a new release policy in the proposed simulation model for wafer fabrication system. Sādhanā 44:2.
Crossref
Crossref
Nuno O. Fernandes, Matthias Thürer, Luís Pinto Ferreira & S. Carmo-Silva. (2019) POLCA: Centralised vs. Decentralised Job Release. IFAC-PapersOnLine 52:13, pages 1427-1431.
Crossref
Crossref
Manuel Schneckenreither & Stefan Haeussler. 2019. Machine Learning, Optimization, and Data Science. Machine Learning, Optimization, and Data Science
545
559
.
James C. Chen, Tzu-Li Chen, Bayu Rezki Pratama & Qian-Fang Tu. (2016) Capacity planning with ant colony optimization for TFT-LCD array manufacturing. Journal of Intelligent Manufacturing 29:8, pages 1695-1713.
Crossref
Crossref
Bart Beemsterboer, Martin Land, Ruud Teunter & Jos Bokhorst. (2017) Reprint of “Integrating make-to-order and make-to-stock in job shop control”. International Journal of Production Economics 194, pages 3-12.
Crossref
Crossref
Nuno O. Fernandes, Matthias Thürer, Cristóvão Silva & Sílvio Carmo-Silva. (2017) Improving workload control order release: Incorporating a starvation avoidance trigger into continuous release. International Journal of Production Economics 194, pages 181-189.
Crossref
Crossref
Paolo Renna. (2017) Decision-making method of reconfigurable manufacturing systems’ reconfiguration by a Gale-Shapley model. Journal of Manufacturing Systems 45, pages 149-158.
Crossref
Crossref
Kaustav Kundu & Alberto Portioli Staudacher. (2017) Order review and release methods in internal logistics of a MTO company. Order review and release methods in internal logistics of a MTO company.
Matthias Thürer, Mark Stevenson, Cristovao Silva & Ting Qu. (2017) Drum-buffer-rope and workload control in High-variety flow and job shops with bottlenecks: An assessment by simulation. International Journal of Production Economics 188, pages 116-127.
Crossref
Crossref
Bart Beemsterboer, Martin Land, Ruud Teunter & Jos Bokhorst. (2017) Integrating make-to-order and make-to-stock in job shop control. International Journal of Production Economics 185, pages 1-10.
Crossref
Crossref
Matthias Thürer, Mark Stevenson & Martin J. Land. (2016) On the integration of input and output control: Workload Control order release. International Journal of Production Economics 174, pages 43-53.
Crossref
Crossref
Matthias Thürer, Martin J. Land, Mark Stevenson & Lawrence D. Fredendall. (2016) Card-based delivery date promising in high-variety manufacturing with order release control. International Journal of Production Economics 172, pages 19-30.
Crossref
Crossref
Kaustav Kundu & Alberto Portioli Staudacher. (2016) Investigation of Effectiveness of Order Review and Release Models in Make to Order Supply Chain. MATEC Web of Conferences 81, pages 06003.
Crossref
Crossref
Hermann LöddingHermann Lödding. 2016. Verfahren der Fertigungssteuerung. Verfahren der Fertigungssteuerung
373
386
.
Paolo Renna. (2015) Workload control policies under continuous order release. Production Engineering 9:5-6, pages 655-664.
Crossref
Crossref
Massimo Bertolini, Giovanni Romagnoli & Francesco Zammori. (2015) Simulation of two hybrid production planning and control systems: A comparative analysis. Simulation of two hybrid production planning and control systems: A comparative analysis.
Martin J. Land, Mark Stevenson, Matthias Thürer & Gerard J.C. Gaalman. (2015) Job shop control: In search of the key to delivery improvements. International Journal of Production Economics 168, pages 257-266.
Crossref
Crossref
Matthias Thürer, Martin J. Land, Mark Stevenson, Lawrence D. Fredendall & Moacir Godinho Filho. (2015) Concerning Workload Control and Order Release: The Pre‐Shop Pool Sequencing Decision. Production and Operations Management 24:7, pages 1179-1192.
Crossref
Crossref
Matthias Thürer, Mark Stevenson, Ting Qu & Moacir Godinho Filho. (2014) The design of simple subcontracting rules for make-to-order shops: An assessment by simulation. European Journal of Operational Research 239:3, pages 854-864.
Crossref
Crossref
Matthias Thürer, Mark Stevenson, Cristovao Silva, Martin J. Land, Lawrence D. Fredendall & Steven A. Melnyk. (2014) Lean Control for Make‐to‐Order Companies: Integrating Customer Enquiry Management and Order Release. Production and Operations Management 23:3, pages 463-476.
Crossref
Crossref
Matthias Thürer, Martin J. Land & Mark Stevenson. (2014) Card-based workload control for job shops: Improving COBACABANA. International Journal of Production Economics 147, pages 180-188.
Crossref
Crossref
Jae-Min Yu, Hyoung-Ho Doh, Ji-Su Kim, Yong-Ju Kwon, Dong-Ho Lee & Sung-Ho Nam. (2013) Input sequencing and scheduling for a reconfigurable manufacturing system with a limited number of fixtures. The International Journal of Advanced Manufacturing Technology 67:1-4, pages 157-169.
Crossref
Crossref
Hermann LöddingHermann Lödding. 2013. Handbook of Manufacturing Control. Handbook of Manufacturing Control
335
346
.
G.D. Soepenberg, M.J. Land & G.J.C. Gaalman. (2012) Adapting workload control for job shops with high routing complexity. International Journal of Production Economics 140:2, pages 681-690.
Crossref
Crossref
Matthias Thürer, Mark Stevenson, Cristovao Silva, Martin J. Land & Lawrence D. Fredendall. (2012) Workload Control and Order Release: A Lean Solution for Make‐to‐Order Companies. Production and Operations Management 21:5, pages 939-953.
Crossref
Crossref
Matthias Thurer & Moacir Godinho Filho. (2012) Redução do lead time e entregas no prazo em pequenas e médias empresas que fabricam sob encomenda: a abordagem Worload Control (WLC) para o Planejamento e Controle da Produção (PCP). Gestão & Produção 19:1, pages 43-58.
Crossref
Crossref
J. Xu, X. Xu & S.Q. Xie. (2011) Recent developments in Dual Resource Constrained (DRC) system research. European Journal of Operational Research 215:2, pages 309-318.
Crossref
Crossref
Kun-Yung Lu. (2011) A plug-and-play data gathering system using ZigBee-based sensor network sensor network. Computers in Industry 62:7, pages 719-728.
Crossref
Crossref
Mark Stevenson, Yuan Huang, Linda C. Hendry & Erik Soepenberg. (2011) The theory and practice of workload control: A research agenda and implementation strategy. International Journal of Production Economics 131:2, pages 689-700.
Crossref
Crossref
Lawrence D. Fredendall, Divesh Ojha & J. Wayne Patterson. (2010) Concerning the theory of workload control. European Journal of Operational Research 201:1, pages 99-111.
Crossref
Crossref
B. S. Nguyen Phan, M. J. Land & G. J. C. Gaalman. (2009) Workload Control with continuous release. Workload Control with continuous release.
Francesco Gentile & K.J. Rogers. (2009) Order release and dispatching in a sequence dependent job shop. Order release and dispatching in a sequence dependent job shop.
Chao Qi, A.I. Sivakumar & S.B. Gershwin. (2008) Impact of Production Control and System Factors in Semiconductor Wafer Fabrication. IEEE Transactions on Semiconductor Manufacturing 21:3, pages 376-389.
Crossref
Crossref
Adil Baykasoğlu, Mustafa Göçken & Zeynep D. Unutmaz. (2008) New approaches to due date assignment in job shops. European Journal of Operational Research 187:1, pages 31-45.
Crossref
Crossref
I. P. Tatsiopoulos, A. Batsis & A. G. Papadopoulos. 2008. Lean Business Systems and Beyond. Lean Business Systems and Beyond
75
92
.
S.Y. Hsu & D.Y. Sha. (2007) The integration of shop floor control in wafer fabrication. Journal of Manufacturing Technology Management 18:5, pages 598-619.
Crossref
Crossref
Chandrasekharan Rajendran & Knut Alicke. (2007) Dispatching in flowshops with bottleneck machines. Computers & Industrial Engineering 52:1, pages 89-106.
Crossref
Crossref
Mark Stevenson & Linda C. Hendry. (2006) Aggregate load-oriented workload control: A review and a re-classification of a key approach. International Journal of Production Economics 104:2, pages 676-693.
Crossref
Crossref
Martin Land. (2006) Parameters and sensitivity in workload control. International Journal of Production Economics 104:2, pages 625-638.
Crossref
Crossref
Hui Li & Liming Liu. (2006) Production control in a two-stage system. European Journal of Operational Research 174:2, pages 887-904.
Crossref
Crossref
Hans Corsten, Ralf Gössinger & Norbert Wolf. (2005) Flexibility-driven order releases in job-shop production. Technovation 25:8, pages 815-830.
Crossref
Crossref
James C. Chen, Chia-Wen Chen, C. Joe Lin & Hsin Rau. (2005) Capacity planning with capability for multiple semiconductor manufacturing fabs. Computers & Industrial Engineering 48:4, pages 709-732.
Crossref
Crossref
Ellen J. Dumond. (2005) Understanding and using the capabilities of finite scheduling. Industrial Management & Data Systems 105:4, pages 506-526.
Crossref
Crossref
Robert A. LeitchPatrick R. PhilipoomTimothy D. Fry. (2005) Opportunity Costing Decision Heuristics for Product Acceptance Decisions. Journal of Management Accounting Research 17:1, pages 95-117.
Crossref
Crossref
D.Y. Sha & Sheng‐Yuan Hsu. (2004) The effects of rework on the shopfloor control in wafer fabrication. Journal of Manufacturing Technology Management 15:2, pages 184-198.
Crossref
Crossref
Sameh M. Saad, N. Pickett & K. Kittiaram. (2004) An integrated model for order release and due‐date demand management. Journal of Manufacturing Technology Management 15:1, pages 76-89.
Crossref
Crossref
Ruey-Shun Chen, Kun-Yung Lu, Shien-Chiang Yu, Hong-Wei Tzeng & C.C. Chang. (2003) A case study in the design of BTO/CTO shop floor control system. Information & Management 41:1, pages 25-37.
Crossref
Crossref
Patrik Jonsson & Stig‐Arne Mattsson. (2003) The implications of fit between planning environments and manufacturing planning and control methods. International Journal of Operations & Production Management 23:8, pages 872-900.
Crossref
Crossref
Mohd Shaladdin Muda & Linda Hendry. (2003) The SHEN model for MTO SMEs. International Journal of Operations & Production Management 23:5, pages 470-486.
Crossref
Crossref
Amitava Nandi & P. Rogers. (2003) Behavior of an order release mechanism in a make-to-order manufacturing system with selected order acceptance. Behavior of an order release mechanism in a make-to-order manufacturing system with selected order acceptance.
Shaladdin Muda & Linda Hendry. (2002) Developing a new world class model for small and medium sized make-to-order companies. International Journal of Production Economics 78:3, pages 295-310.
Crossref
Crossref
Kum‐Khiong Yang, Scott Webster & Robert A. Ruben. (2007) An Evaluation of Flexible Workday Policies in Job Shops*. Decision Sciences 33:2, pages 223-250.
Crossref
Crossref
Yeong-Dae Kim, Dong-Ho Lee & Chi-Moon Yoon. (2001) Two-stage heuristic algorithms for part input sequencing in flexible manufacturing systems. European Journal of Operational Research 133:3, pages 624-634.
Crossref
Crossref
Satya S Chakravorty. (2001) An evaluation of the DBR control mechanism in a job shop environment. Omega 29:4, pages 335-342.
Crossref
Crossref
F.T.S. Chan, P. Humphreys & T.H. Lu. (2001) Order release mechanisms in supply chain management: a simulation approach. International Journal of Physical Distribution & Logistics Management 31:2, pages 124-139.
Crossref
Crossref
Bas Oosterman, Martin Land & Gerard Gaalman. (2000) The influence of shop characteristics on workload control. International Journal of Production Economics 68:1, pages 107-119.
Crossref
Crossref
I. Sabuncuoglu & H. Y. Karapinar. (2007) A Load‐based and Due‐date‐oriented Approach to Order Review/Release in Job Shops*. Decision Sciences 31:2, pages 413-447.
Crossref
Crossref
S.T Enns. (2000) Evaluating shop floor input control using rapid modeling. International Journal of Production Economics 63:3, pages 229-241.
Crossref
Crossref
Jeffrey W. Herrmann. 2000. Encyclopedia of Production and Manufacturing Management. Encyclopedia of Production and Manufacturing Management
495
500
.
Sukran N. Kadipasaoglu & V. Sridharan. 2000. Wiley Encyclopedia of Electrical and Electronics Engineering. Wiley Encyclopedia of Electrical and Electronics Engineering.
W. Rocky Newman & Mary Jo Maffei. (1999) Managing the job shop: simulating the effects of flexibility, order release mechanisms and sequencing rules. Integrated Manufacturing Systems 10:5, pages 266-275.
Crossref
Crossref
I. Sabuncuoglu & H.Y. Karapınar. (1999) Analysis of order review/release problems in production systems. International Journal of Production Economics 62:3, pages 259-279.
Crossref
Crossref
A. Subash Babu. (1999) Strategies for enhancing agility of make‐to‐order manufacturing systems. International Journal of Agile Management Systems 1:1, pages 23-29.
Crossref
Crossref
Nicholas Bilalis, Nicholas Alatsas, Franco Soppera & Alexandros Xanthas. (1999) Technical and qualitative information sharing between fabric finishing and garment manufacturer. Computers in Industry 38:2, pages 201-206.
Crossref
Crossref
Martin J. Land & Gerard J.C. Gaalman. (1998) The performance of workload control concepts in job shops: Improving the release method. International Journal of Production Economics 56-57, pages 347-364.
Crossref
Crossref
S.T. Enns. (1998) Lead time selection and the behaviour of work flow in job shops. European Journal of Operational Research 109:1, pages 122-136.
Crossref
Crossref
Kim Yeong-Dae, Lee Dong-Ho, Kim Jung-Ug & Roh Hwan-Kyun. (1998) A simulation study on lot release control, mask scheduling, and batch scheduling in semiconductor wafer fabrication facilities. Journal of Manufacturing Systems 17:2, pages 107-117.
Crossref
Crossref
L.C. Hendry, B.G. Kingsman & P. Cheung. (1998) The effect of workload control (WLC) on performance in make‐to‐order companies. Journal of Operations Management 16:1, pages 63-75.
Crossref
Crossref
V.Daniel R. GuideJr.Jr. & Rajesh Srivastava. (1997) An evaluation of order release strategies in a remanufacturing environment. Computers & Operations Research 24:1, pages 37-47.
Crossref
Crossref
Gary J. Salegna & Paul S. Park. (1996) Workload smoothing in a bottleneck job shop. International Journal of Operations & Production Management 16:1, pages 91-110.
Crossref
Crossref
Surendra M. Gupta. (1995) Interrelationship between controlling arrival and service in queueing systems. Computers & Operations Research 22:10, pages 1005-1014.
Crossref
Crossref
Joel D. Wisner. (1995) A review of the order release policy research. International Journal of Operations & Production Management 15:6, pages 25-40.
Crossref
Crossref
Sunil Lingayat, John Mittenthal & Robert M. O'Keefe. (2007) Order Release in Automated Manufacturing Systems. Decision Sciences 26:2, pages 175-208.
Crossref
Crossref
Emre Veral. (1999) Using production and transfer batches in flowshops under MRP control. Journal of Operations Management 12:2, pages 89-100.
Crossref
Crossref
James R. Ashby & Reha Uzsoy. (1995) Scheduling and order release in a single-stage production system. Journal of Manufacturing Systems 14:4, pages 290-306.
Crossref
Crossref
Manoj K. Malhotra, John B. Jensen & Patrick R. Philipoom. (2007) Management of Vital Customer Priorities in Job Shop Manufacturing Environments. Decision Sciences 25:5-6, pages 711-736.
Crossref
Crossref
S. Piramuthu, N. Raman & M.J. Shaw. (1994) Learning-based scheduling in a flexible manufacturing flow line. IEEE Transactions on Engineering Management 41:2, pages 172-182.
Crossref
Crossref
STEVEN A. MELNYK, DAVID R. DENZLER, GREGORY L. MAGNAN & LAWRENCE FREDENDALL. (1994) AN EXPERIMENTAL MODEL FOR INVESTIGATING THE SENSITIVITY OF JOB SHOP PERFORMANCE TO JOB RELEASE TIME DISTRIBUTION PARAMETERS. Production and Operations Management 3:1, pages 64-74.
Crossref
Crossref
C.-T.C. Ying & G.M. Clark. (1994) Order release planning in a job shop using a bi-directional simulation algorithm. Order release planning in a job shop using a bi-directional simulation algorithm.
Patrick R. Philipoom, Manoj K. Malhotra & John B. Jensen. (2007) An Evaluation of Capacity Sensitive Order Review and Release Procedures in Job Shops. Decision Sciences 24:6, pages 1109-1134.
Crossref
Crossref
Günther Zäpfel & Hubert Missbauer. (1993) New concepts for production planning and control. European Journal of Operational Research 67:3, pages 297-320.
Crossref
Crossref
Imtiaz Ahmed & Warren W. Fisher. (2007) Due Date Assignment, Job Order Release, and Sequencing Interaction in Job Shop Scheduling*. Decision Sciences 23:3, pages 633-647.
Crossref
Crossref
Ching-Jong Liao. (1992) Optimal control of jobs for production systems. Computers & Industrial Engineering 22:2, pages 163-169.
Crossref
Crossref
Steven A. Melnyk, Gary L. Ragatz & Lawrence Fredendall. (2002) Load smoothing by the planning and order review/release systems: A simulation experiment. Journal of Operations Management 10:4, pages 512-523.
Crossref
Crossref
Linda C. Hendry. (1991) MANUFACTURING MANAGEMENT IN MAKE‐TO‐ORDER COMPANIES. Management Research News 14:7/8/9, pages 69-71.
Crossref
Crossref
Linda Hendry & Brian Kingsman. (1991) A Decision Support System for Job Release in Make‐to‐order
Companies. International Journal of Operations & Production Management 11:6, pages 6-16.
Crossref
Crossref
Farzad Mahmoodi, Kevin J. Dooley & Patrick J. Starr. (2002) An evaluation of order releasing and due date assignment heuristics in a cellular manufacturing system. Journal of Operations Management 9:4, pages 548-573.
Crossref
Crossref
Gary D. Scudder, Dwight E. Smith‐Daniels & Thomas Rohleder. (2002) Use of the net present value criterion in a random job shop where early shipments are forbidden. Journal of Operations Management 9:4, pages 526-547.
Crossref
Crossref