Turali Narayana & Sheikh Shahid Saleem. (2024) Comparative investigation and characterization of the nano-mechanical and tribological behavior of RF magnetron sputtered TiN, CrN, and TiB2 coating on Ti6Al4V alloy. Tribology International 193, pages 109348.
Crossref
Ching-Yin Lee, Yi-Chia Tsai, Su-Jien Lin & Jien-Wei Yeh. (2024) Correction of substrate-induced thin-film modulus deviations in nanoindentation measurements. Ceramics International 50:8, pages 12771-12777.
Crossref
Michael Storchak, Larysa Hlembotska & Oleksandr Melnyk. (2024) Generation of Mechanical Characteristics in Workpiece Subsurface Layers through Milling. Materials 17:7, pages 1552.
Crossref
Xu Long, Ziyi Shen, Jiao Li, Ruipeng Dong, Ming Liu, Yutai Su & Chuantong Chen. (2024) Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates. Journal of Materials Research and Technology 29, pages 2437-2447.
Crossref
Rotana Hay, Shaheer Haider, Abdulrahman AlTantawi & Kemal Celik. (2024) Color modification of ceramics with controlled firing. Ceramics International 50:1, pages 566-574.
Crossref
J.C. Stallard, S. Vema, C.P. Grey, V.S. Deshpande & N.A. Fleck. (2023) The strength of a constrained lithium layer. Acta Materialia 260, pages 119313.
Crossref
Manish Kumar Mishra, Pinki Mahur, Praveena Manimunda & Kamini Mishra. (2023) Recent Advances in Nanomechanical Measurements and Their Application for Pharmaceutical Crystals. Molecular Pharmaceutics 20:10, pages 4848-4867.
Crossref
Edoardo Rossi, Jeffrey M. Wheeler & Marco Sebastiani. (2023) High-speed nanoindentation mapping: A review of recent advances and applications. Current Opinion in Solid State and Materials Science 27:5, pages 101107.
Crossref
José Leal, Guilherme Martiniano, Marcelo Paes, Waldek Bose Filho, Vera Franco, Rosenda Arencibia & Sinésio Franco. (2023) Nanomechanical characterization of the hydrogen effect on high strength steels. International Journal of Pressure Vessels and Piping 204, pages 104980.
Crossref
John B. Pethica. (2023) Nanoindentation in more than one dimension – Experimental challenges and opportunities. Current Opinion in Solid State and Materials Science 27:4, pages 101100.
Crossref
Marwa H. El Makdah, Nour El Ghouch, Mohammad H. El-Dakdouki, R. Awad & M. Matar. (2023) Synthesis, characterization, and Vickers microhardness for (YIG)x/(Bi,Pb)-2223 superconducting phase. Ceramics International 49:13, pages 22400-22422.
Crossref
S.I. Okocha, F. Yu, P.Y.B. Jar & M.T. Hendry. (2023) Indentation Testing Method for Determining Mechanical Properties and Tensile Flow Curve of High-Strength Rail Steels. Experimental Mechanics 63:5, pages 839-852.
Crossref
Bryer C. Sousa, Jennifer Hay & Danielle L. Cote. 2023. Elasticity of Materials. Elasticity of Materials.
Michael Storchak. (2023) Mechanical Characteristics Generation in the Workpiece Subsurface Layers through Cutting. Crystals 13:5, pages 761.
Crossref
Rafal Abram, Dariusz Chrobak, Jesper Byggmästar, Kai Nordlund & Roman Nowak. (2023) Comprehensive structural changes in nanoscale-deformed silicon modelled with an integrated atomic potential. Materialia 28, pages 101761.
Crossref
Rajiv Mukherjee & Santanu Misra. (2023) Nanomechanics of minerals: understandings and developments through instrumented nanoindentation techniques. Physics and Chemistry of Minerals 50:1.
Crossref
Trevor Bond, Nima Rhabar & Wole Soboyejo. 2023. Comprehensive Structural Integrity. Comprehensive Structural Integrity
294
307
.
Tao Shi, Yanming Liu, Xingyu Zhao, Jianmin Wang, Zhifang Zhao, David J. Corr & Surendra P. Shah. (2022) Study on mechanical properties of the interfacial transition zone in carbon nanofiber-reinforced cement mortar based on the PeakForce tapping mode of atomic force microscope. Journal of Building Engineering 61, pages 105248.
Crossref
Rahul Ghosh, Arjun Dey, M.K. Kavitha, Hari Krishna Thota, Sarmistha Dhan, A. Rajendra & Karabi Das. (2022) Nanoindentation responses of black anodic coating on additively manufactured Al–10Si–Mg alloy. Ceramics International 48:23, pages 35883-35895.
Crossref
Chaopeng Zhao, Weishan Yan, Suqin Han, Wangyang Zhang, Min Jin & Duo Liu. (2022) Mechanically accessible band engineering via indentation-induced phase transition on two-dimensional layered β-InSe. Applied Surface Science 604, pages 154573.
Crossref
Morgan Rusinowicz, Fabien Volpi, Guillaume Parry, Muriel Braccini, Chaymaa Boujrouf & Marc Verdier. (2022) Evidence of Plasticity‐Driven Conductivity Drop in an Ultra‐Low‐k Dielectric Organosilicate Glass. Advanced Functional Materials 32:47.
Crossref
H. Mahdavi, Ö. C. Kücükyildiz, K. V. Dahl, M. A. J. Somers, K. Poulios, T. L. Christiansen & M. Villa. (2022) Rapid Screening of the Mechanical Properties of 13 wt%Cr Steels with Uncharted Combinations of C and N Contents. HTM Journal of Heat Treatment and Materials 77:5, pages 336-356.
Crossref
Liuqing Yang, Youxing Chen, Jimmie Miller, William J. Weber, Hongbin Bei & Yanwen Zhang. (2022) Deformation mechanisms in single crystal Ni-based concentrated solid solution alloys by nanoindentation. Materials Science and Engineering: A 856, pages 143685.
Crossref
Ziyi Shen, Ruipeng Dong, Kainan Chong, Yongchao Liu, Yutai Su & Xu Long. (2022) Equivalence of nanoindentations by the load and displacement controlled manners. Equivalence of nanoindentations by the load and displacement controlled manners.
Siwei Zhao, Jianwei Zhang, Yuanxin Li, Haitao Liu, Bingbing Wang & Minghao Zhao. (2022) An indentation method for determining the film thickness, Young’s modulus, and hardness of bilayer materials. Journal of Physics D: Applied Physics 55:27, pages 274002.
Crossref
Chengkang Mo, Junliang Zhao & Dongxiao Zhang. (2022) Real-Time Measurement of Mechanical Behavior of Granite During Heating–Cooling Cycle: A Mineralogical Perspective. Rock Mechanics and Rock Engineering 55:7, pages 4403-4422.
Crossref
Gerald J. K. Schaffar, Johann Kappacher, Daniel Tscharnuter & Verena Maier-Kiener. (2022) The Phase Transformation of Silicon Assessed by an Unloading Contact Pressure Approach. JOM 74:6, pages 2220-2230.
Crossref
Simón Roa & Martín Sirena. (2022) AFM imaging analysis of nanoindentation-induced plastic strain in indium surface for calibrating nanoindenters area profiles. Physica B: Condensed Matter 633, pages 413773.
Crossref
Ifeanyi Emmanuel Kalu, Ericmoore Jossou, Emmanuel Kwesi Arthur, Simon Ja'afaru & Edith Yohanna Ishidi. (2022) Characterization and Mechanical Property Measurements by Instrumented Indentation Testing of Niger Delta Oil Shale Cuttings. International Journal of Engineering Research in Africa 59, pages 89-100.
Crossref
Hansol Jeon, Jeong-Hyun Woo, Eunji Song & Ju-Young Kim. (2022) Ligament size effect in creep of nanoporous gold. International Journal of Plasticity 150, pages 103192.
Crossref
Adebayo Badmos & Wole Soboyejo. (2022) Indentation Size Effect on the Microhardness of Ductile Iron. Indentation Size Effect on the Microhardness of Ductile Iron.
J. F. Palacio & S. J. Bull. (2022) Dynamic indentation measurements on amorphous materials. International Journal of Materials Research 95:5, pages 335-339.
Crossref
Inderjeet Singh, Rotana Hay & Kemal Celik. (2022) Recovery and direct carbonation of brucite from desalination reject brine for use as a construction material. Cement and Concrete Research 152, pages 106673.
Crossref
R. W. Armstrong, W. L. Elban & S. M. Walley. (2021) Nano-Indentation Hardness and Strain Hardening of Silicon, Sodium Chloride and Tungsten Crystals. Experimental Mechanics 62:2, pages 359-364.
Crossref
Hamidreza Mahdavi, Konstantinos Poulios & Christian F. Niordson. (2022) A Pragmatic Approach for the Evaluation of Depth-Sensing Indentation in the Self-Similar Regime. Journal of Applied Mechanics 89:1.
Crossref
Tushar Banerjee & Simanchal Kar. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers
688
699
.
B. Nagamani Jaya, Nidhin G. Mathews, Ashwini K. Mishra, Soudip Basu & Kevin Jacob. (2022) Non-conventional Small-Scale Mechanical Testing of Materials. Journal of the Indian Institute of Science 102:1, pages 139-171.
Crossref
Xiaoqing Jin, Pu Li & Feodor M. Borodich. 2022. Contact Problems for Soft, Biological and Bioinspired Materials. Contact Problems for Soft, Biological and Bioinspired Materials
181
198
.
Sara Jiménez-Alfaro & Dominique Leguillon. (2021) Finite fracture Mechanics at the micro-scale. Application to bending tests of micro cantilever beams. Engineering Fracture Mechanics 258, pages 108012.
Crossref
Hanna Tsybenko, Farnaz Farzam, Gerhard Dehm & Steffen Brinckmann. (2021) Scratch hardness at a small scale: Experimental methods and correlation to nanoindentation hardness. Tribology International 163, pages 107168.
Crossref
S. M. Dub, K. E. Pechkovs’kyi, I. M. Pechkovs’ka & M. L. Trunov. (2022) Viscoelasticity of Dental Hard Tissues. Strength of Materials 53:6, pages 918-927.
Crossref
Simón Roa & Martín Sirena. (2021) A finite element analysis of conical indentation in elastic-plastic materials: On strain energy based strategies for an area-independent determination of solids mechanical properties. International Journal of Mechanical Sciences 207, pages 106651.
Crossref
Kazue Orikasa, Nicole Bacca & Arvind Agarwal. (2021) Meso/macro-scale ultra-soft materials’ mechanical property evaluation device and testbed. Review of Scientific Instruments 92:7.
Crossref
Li Yang, Yuan Yuan, Tao Chen, Xu Dai, Ling Zhang, Dajian Li, Aitao Tang, Wang Yi, Lijun Zhang & Fusheng Pan. (2021) Diffusion behaviour and mechanical properties of binary Mg–Gd system. Intermetallics 133, pages 107171.
Crossref
Alessandro Schiavi, Claudio Origlia, Alessandro Germak, Andrea Prato & Gianfranco Genta. (2021) Indentation Modulus, Indentation Work and Creep of Metals and Alloys at the Macro-Scale Level: Experimental Insights into the Use of a Primary Vickers Hardness Standard Machine. Materials 14:11, pages 2912.
Crossref
Tuan Tran Quoc, Dung Nguyen Trong & Ştefan Ţălu. (2021) Study on the Influence of Factors on the Structure and Mechanical Properties of Amorphous Aluminium by Molecular Dynamics Method. Advances in Materials Science and Engineering 2021, pages 1-10.
Crossref
Per-Lennart Larsson. (2021) On the Behavior of Mechanical Stress Fields at Indentation of Materials with Residual Stresses. Journal of Materials Engineering and Performance 30:4, pages 2566-2573.
Crossref
P. Knotek, P. Kutálek, E. Černošková, M. Vlček & L. Tichý. (2020) The density, nanohardness and some optical properties of As–S and As–Se chalcogenide bulk glasses and thin films. RSC Advances 10:70, pages 42744-42753.
Crossref
Antanas Daugela & Jurgis Daugela. (2020) Opto-nanomechanical test instrument in mechanical characterization of DLC coated MEMS devices. Microsystem Technologies 26:11, pages 3323-3329.
Crossref
Bharat Bhushan. (2020) Frontiers in nanotribology: Magnetic storage, bio/nanotechnology, cosmetics, and bioinspiration. Journal of Colloid and Interface Science 577, pages 127-162.
Crossref
Xiang An, Kai Wang, Lubing Bai, Chuanxin Wei, Man Xu, Mengna Yu, Yamin Han, Ning Sun, Lili Sun, Jinyi Lin, Xuehua Ding, Linghai Xie, Qi Zhang, Tianshi Qin & Wei Huang. (2020) Intrinsic mechanical properties of the polymeric semiconductors. Journal of Materials Chemistry C 8:33, pages 11631-11637.
Crossref
Ricardo Garcia. (2020) Nanomechanical mapping of soft materials with the atomic force microscope: methods, theory and applications. Chemical Society Reviews 49:16, pages 5850-5884.
Crossref
Rotana Hay, Jiaqi Li & Kemal Celik. (2020) Influencing factors on micromechanical properties of calcium (alumino) silicate hydrate C-(A-)S-H under nanoindentation experiment. Cement and Concrete Research 134, pages 106088.
Crossref
M. Heller, J.S.K.-L. Gibson, R. Pei & S. Korte-Kerzel. (2020) Deformation of µm- and mm-sized Fe2.4wt%Si single- and bi-crystals with a high angle grain boundary at room temperature. Acta Materialia 194, pages 452-463.
Crossref
Jarosław Borc, Keshra Sangwal, Michał Świetlicki, Dariusz Chocyk & Grzegorz Gładyszewski. (2020) Vickers microindentation deformation of different cleavage faces of potassium bichromate single crystals: Anisotropy in microhardness and crack formation. Materials Science and Engineering: A 790, pages 139642.
Crossref
Yuan Xiao, Hossein Besharatloo, Bin Gan, Xavier Maeder, Ralph Spolenak & Jeffrey M. Wheeler. (2020) Combinatorial investigation of Al–Cu intermetallics using small-scale mechanical testing. Journal of Alloys and Compounds 822, pages 153536.
Crossref
Thomas Rousseau, Yooseob Song, Wenbin Wang, Shruti Rastogi, George Z. Voyiadjis & Jeffrey W. Kysar. (2020) Order in polycrystalline plasticity deformation fields: Short-range intermittency and long-range persistency. International Journal of Plasticity 128, pages 102674.
Crossref
Simón Roa Díaz. (2020) On the propagation of methodological uncertainties in Depth Sensing Indentation data analysis: A brief and critical review. Mechanics Research Communications 105, pages 103516.
Crossref
Owen Brazil, Johann P. de Silva, Mithun Chowdhury, Heedong Yoon, Gregory B. McKenna, Warren C. Oliver, Jason Kilpatrick, John B. Pethica & Graham L.W. Cross. (2020) In situ measurement of bulk modulus and yield response of glassy thin films via confined layer compression. Journal of Materials Research 35:6, pages 644-653.
Crossref
T. Oellers, V. G. Arigela, C. Kirchlechner, G. Dehm & A. Ludwig. (2020) Thin-Film Microtensile-Test Structures for High-Throughput Characterization of Mechanical Properties. ACS Combinatorial Science 22:3, pages 142-149.
Crossref
Kouqi Liu, Mehdi Ostadhassan & Xiaomeng Xu. (2020) A comparison study of the unloading behavior in shale samples in nanoindentation experiments using different models. Journal of Petroleum Science and Engineering 186, pages 106715.
Crossref
Jay F. Tu, Nilesh Rajule & Sang Don Mun. (2020) Novel Characterizations of Mechanical Properties for a Copper/Single-Walled Carbon Nanotube Nanocomposite Synthesized by Laser Surface Implanting. C — Journal of Carbon Research 6:1, pages 10.
Crossref
Ronald W. Armstrong & Wayne L. Elban. (2020) Crystal Strengths at Micro- and Nano-Scale Dimensions. Crystals 10:2, pages 88.
Crossref
S.J. Bull. (2019) Microstructure and indentation response of TiN coatings: The effect of measurement method. Thin Solid Films 688, pages 137452.
Crossref
Tuan Tran Quoc & Dung Nguyen Trong. (2019) Molecular dynamics factors affecting on the structure, phase transition of Al bulk. Physica B: Condensed Matter 570, pages 116-121.
Crossref
Hongxing Xiao, Xiaomin Wang, Chongsheng Long & Hongsheng Chen. (2019) Effect of burnup on the mechanical properties of doped UO2 ceramic pellets using the simfuel technique. Journal of Nuclear Materials 524, pages 247-255.
Crossref
Hyung N. Kim, Sourav Mandal, Bikramjit Basu & Surya R. Kalidindi. (2019) Probing Local Mechanical Properties in Polymer-Ceramic Hybrid Acetabular Sockets Using Spherical Indentation Stress-Strain Protocols. Integrating Materials and Manufacturing Innovation 8:3, pages 257-272.
Crossref
Mei Ren, Tao Shi, David J. Corr & Surendra P. Shah. (2019) Mechanical Properties of Micro-regions in Cement-based Material based on the PeakForce QNM Mode of AFM. Journal of Wuhan University of Technology-Mater. Sci. Ed. 34:4, pages 893-899.
Crossref
Naughton-Duszová, Csanádi, Sedlák, Hvizdoš & Dusza. (2019) Small-Scale Mechanical Testing of Cemented Carbides from the Micro- to the Nano-Level: A Review. Metals 9:5, pages 502.
Crossref
Marcello Conte, Gaurav Mohanty, Jakob J. Schwiedrzik, Jeffrey M. Wheeler, Bertrand Bellaton, Johann Michler & Nicholas X. Randall. (2019) Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C. Review of Scientific Instruments 90:4, pages 045105.
Crossref
Giacomo Po, Yue Huang & Nasr Ghoniem. (2019) A continuum dislocation-based model of wedge microindentation of single crystals. International Journal of Plasticity 114, pages 72-86.
Crossref
Hanae Chabba, Irmantas Gedzevičius, Valentinas Varnauskas, Driss Dafir & Fouzi Belmir. (2019) INFLUENCE OF HEAT TREATMENT ON MICROSTRUCTURAL EVOLUTION AND MECHANICAL CHARACTERISTICS OF AA6061 ALUMINUM ALLOY / TERMINIO APDOROJIMO ĮTAKA ALIUMINIO LYDINIO AA6061 MIKROSTRUKTŪRAI IR MECHANINĖMS SAVYBĖMS. Mokslas - Lietuvos ateitis 11:0, pages 1-5.
Crossref
Chi-Hua Yu, Kuan-Po Lin & Chuin-Shan Chen. 2019. Handbook of Mechanics of Materials. Handbook of Mechanics of Materials
759
794
.
Toshiaki Masuda, Yasutomo Omori, Ryoko Sakurai, Tomoya Miyake, Mirai Yamanouchi, Yumiko Harigane, Atsushi Okamoto & Katsuyoshi Michibayashi. (2018) Loop energy: A useful indicator of the hardness of minerals from depth-sensing indentation tests. Journal of Structural Geology 117, pages 96-104.
Crossref
Hongxing Xiao, Xiaomin Wang, Chongsheng Long, Yu Liu, Anyi Yin & Yuting Zhang. (2018) Investigation of the mechanical properties of ZrO2-doped UO2 ceramic pellets by indentation technique. Journal of Nuclear Materials 509, pages 482-487.
Crossref
Debjit Misra, Balmukund Dhakar, E. Anusha, S.M. Shariff, Suman Mukhopadhyay & Satyajit Chatterjee. (2018) Evaluation of nanomechanical and tribological properties of laser surface alloyed boride-nitride-carbide ceramic matrix composite coatings. Ceramics International 44:14, pages 17050-17061.
Crossref
Nadimul Haque Faisal, Rehan Ahmed, Saurav Goel & Graham Cross. (2018) Future of nanoindentation in archaeometry. Journal of Materials Research 33:17, pages 2515-2532.
Crossref
Lukman N. Abdulkadir, Khaled Abou-El-Hossein, Abubakar I. Jumare, Muhammad M. Liman, Tirimisiyu A. Olaniyan & Peter Babatunde Odedeyi. (2018) Review of molecular dynamics/experimental study of diamond-silicon behavior in nanoscale machining. The International Journal of Advanced Manufacturing Technology 98:1-4, pages 317-371.
Crossref
Markus Alfreider, Darjan Kozic, Otmar Kolednik & Daniel Kiener. (2018) In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing. Materials & Design 148, pages 177-187.
Crossref
A. Leitner, V. Maier-Kiener & D. Kiener. (2018) Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves. Materials & Design 146, pages 69-80.
Crossref
Joseph E. Jakes. (2017) Improved methods for nanoindentation Berkovich probe calibrations using fused silica. Journal of Materials Science 53:7, pages 4814-4827.
Crossref
A. Prasitthipayong, S.J. Vachhani, S.J. Tumey, A.M. Minor & P. Hosemann. (2018) Indentation size effect in unirradiated and ion-irradiated 800H steel at high temperatures. Acta Materialia 144, pages 896-904.
Crossref
V. Pfahl, C. Ma, W. Arnold & K. Samwer. (2018) Universal aspects of sonolubrication in amorphous and crystalline materials. Journal of Applied Physics 123:3.
Crossref
M. Muralidhar Singh, G. Vijaya, M.S. Krupashankara, B.K. Sridhara & T.N. Shridhar. (2018) Deposition and Characterization of Aluminium Thin film Coatings using DC Magnetron Sputtering Process. Materials Today: Proceedings 5:1, pages 2696-2704.
Crossref
G. Dehm, B.N. Jaya, R. Raghavan & C. Kirchlechner. (2018) Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales. Acta Materialia 142, pages 248-282.
Crossref
Chi-Hua Yu, Kuan-Po Lin & Chuin-Shan Chen. 2018. Handbook of Mechanics of Materials. Handbook of Mechanics of Materials
1
36
.
Shaker A. Meguid, Ahmed R. Alian & M. A. N. Dewapriya. 2018. Micromechanics and Nanomechanics of Composite Solids. Micromechanics and Nanomechanics of Composite Solids
39
70
.
Xiaowen Hu & Yushan Ni. (2017) The Effect of the Vertex Angles of Wedged Indenters on Deformation during Nanoindentation. Crystals 7:12, pages 380.
Crossref
Debapriya Pinaki Mohanty, Hao Wang, Maria Okuniewski & Vikas Tomar. (2017) A nanomechanical Raman spectroscopy based assessment of stress distribution in irradiated and corroded SiC. Journal of Nuclear Materials 497, pages 128-138.
Crossref
Youfeng Zhang, Hongbo Wang, Xinwei Li, Huan Tang & Andreas A. Polycarpou. (2017) A finite element correction method for sub-20 nm nanoindentation considering tip bluntness. International Journal of Solids and Structures 129, pages 49-60.
Crossref
H.L. Yang, S. Kano, Y. Matsukawa, J.J. Shen, Z.S. Zhao, Z.G. Duan, D.Y. Chen, K. Murakami, Y.F. Li, Y. Satoh & H. Abe. (2017) Tensile properties and microstructure of Zr–1.8Nb alloy subjected to 140-MeV C4+ ion irradiation. Journal of Nuclear Materials 495, pages 138-145.
Crossref
Sixie Huang & Caizhi Zhou. (2017) Modeling and Simulation of Nanoindentation. JOM 69:11, pages 2256-2263.
Crossref
Mao Liu, Jhe-yu Lin, Cheng Lu, Kiet Tieu, Kun Zhou & Toshihiko Koseki. (2017) Progress in Indentation Study of Materials via Both Experimental and Numerical Methods. Crystals 7:10, pages 258.
Crossref
Rezwanur Rahman. 2017. Applied Nanoindentation in Advanced Materials. Applied Nanoindentation in Advanced Materials
647
661
.
P‐L. Larsson. 2017. Applied Nanoindentation in Advanced Materials. Applied Nanoindentation in Advanced Materials
1
18
.
O. Iracheta, C.J. Bennett & W. Sun. (2017) The influence of the indentation size in relation to the size of the microstructure of three polycrystalline materials indented with a Berkovich indenter. Materials Science and Engineering: A 706, pages 330-341.
Crossref
Meng Xu, Junyan Yi, Zhongshi Pei, Decheng Feng, Yudong Huang & Yang Yang. (2017) Generation and evolution mechanisms of pavement asphalt aging based on variations in surface structure and micromechanical characteristics with AFM. Materials Today Communications 12, pages 106-118.
Crossref
M. Jamal & M. N. Morgan. (2017) Materials characterization part I: contact area of the Berkovich indenter for nanoindentation tests. The International Journal of Advanced Manufacturing Technology 92:1-4, pages 361-370.
Crossref
Selvaraj Mohana Roopan, T.V. Surendra & G. Madhumitha. 2017. Handbook of Composites from Renewable Materials. Handbook of Composites from Renewable Materials
363
379
.
Dipen K. Patel & Surya R. Kalidindi. (2017) Estimating the slip resistance from spherical nanoindentation and orientation measurements in polycrystalline samples of cubic metals. International Journal of Plasticity 92, pages 19-30.
Crossref
Bharat Bhushan. (2017) Depth-sensing nanoindentation measurement techniques and applications. Microsystem Technologies 23:5, pages 1595-1649.
Crossref
Christian E. Beck, Felix Hofmann, Jeffrey K. Eliason, Alexei. A. Maznev, Keith A Nelson & David E.J. Armstrong. (2017) Correcting for contact area changes in nanoindentation using surface acoustic waves. Scripta Materialia 128, pages 83-86.
Crossref
Bharat Bhushan. 2017. Nanotribology and Nanomechanics. Nanotribology and Nanomechanics
177
251
.
Oisik Das & Debes Bhattacharyya. 2016. Interface/Interphase in Polymer Nanocomposites. Interface/Interphase in Polymer Nanocomposites
337
378
.
Vincent Jardret. 2016. Medical Coatings and Deposition Technologies. Medical Coatings and Deposition Technologies
605
630
.
E. Olsson & P.-L. Larsson. (2016) A unified model for the contact behaviour between equal and dissimilar elastic–plastic spherical bodies. International Journal of Solids and Structures 81, pages 23-32.
Crossref
Saurav Goel, Andrii Kovalchenko, Alexander Stukowski & Graham Cross. (2016) Influence of microstructure on the cutting behaviour of silicon. Acta Materialia 105, pages 464-478.
Crossref
George M. Pharr. (2015) Recent advances in small-scale mechanical property measurement by nanoindentation. Current Opinion in Solid State and Materials Science 19:6, pages 315-316.
Crossref
Dave Maharaj & Bharat Bhushan. (2015) Friction, wear and mechanical behavior of nano-objects on the nanoscale. Materials Science and Engineering: R: Reports 95, pages 1-43.
Crossref
Nicolas Le Bail, Stéphane Benayoun & Bérangère Toury. (2015) Mechanical properties of sol–gel coatings on polycarbonate: a review. Journal of Sol-Gel Science and Technology 75:3, pages 710-719.
Crossref
Xiang Cheng, Li Li, Yumei Huang, Xianhai Yang & Shuangjie Zhou. (2014) Theoretical modeling of the critical conditions for ductile-regime milling of single crystalline silicon. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 229:8, pages 1462-1469.
Crossref
Per-Lennart Larsson & Erik Olsson. (2015) A numerical study of the mechanical behavior at contact between particles of dissimilar elastic–ideally plastic materials. Journal of Physics and Chemistry of Solids 77, pages 92-100.
Crossref
Q. Yu, M. Legros & A.M. Minor. (2015)
In situ
TEM nanomechanics
. MRS Bulletin 40:1, pages 62-70.
Crossref
Huiyang Luo, Yingjie Du, Zhenxing Hu & Hongbing Lu. 2015. Dynamic Behavior of Materials, Volume 1. Dynamic Behavior of Materials, Volume 1
325
333
.
Ronald F. Gibson. (2014) A review of recent research on nanoindentation of polymer composites and their constituents. Composites Science and Technology 105, pages 51-65.
Crossref
M. Göken. 2014. Moderne Methoden der WerkstoffprüFung. Moderne Methoden der WerkstoffprüFung
299
351
.
Zhenxing Hu, Yingjie Du, Huiyang Luo, Bin Zhong & Hongbing Lu. (2014) Internal Deformation Measurement and Force Chain Characterization of Mason Sand under Confined Compression using Incremental Digital Volume Correlation. Experimental Mechanics 54:9, pages 1575-1586.
Crossref
X. Cheng, X. T. Wei, X. H. Yang & Y. B. Guo. (2014) Unified Criterion for Brittle–Ductile Transition in Mechanical Microcutting of Brittle Materials. Journal of Manufacturing Science and Engineering 136:5.
Crossref
Dave Maharaj & Bharat Bhushan. (2014) Scale effects of nanomechanical properties and deformation behavior of Au nanoparticle and thin film using depth sensing nanoindentation. Beilstein Journal of Nanotechnology 5, pages 822-836.
Crossref
F. Wang, B. Fu, H. Luo, S. Staggs, R. A. Mirshams, W. L. Cooper, S. Y. Park, M. J. Kim, C. Hartley & H. Lu. (2014) Characterization of the Grain-Level Mechanical Behavior of Eglin Sand by Nanoindentation. Experimental Mechanics 54:5, pages 871-884.
Crossref
Yue-Ting Zhou & Kang Yong Lee. (2014) Dynamic behavior of a moving frictional punch over the surface of anisotropic materials. Applied Mathematical Modelling 38:9-10, pages 2311-2327.
Crossref
L. Charleux, V. Keryvin, M. Nivard, J.-P. Guin, J.-C. Sanglebœuf & Y. Yokoyama. (2014) A method for measuring the contact area in instrumented indentation testing by tip scanning probe microscopy imaging. Acta Materialia 70, pages 249-258.
Crossref
Milca Aponte-Roman, Beda Mohanty & Adrian B. Mann. (2014) Chemomechanical effects of self-assembled monolayers on gold films. Acta Materialia 68, pages 52-60.
Crossref
Per-Lennart Larsson. (2014) On the Determination of Biaxial Residual Stress Fields from Global Indentation Quantities. Tribology Letters 54:1, pages 89-97.
Crossref
Stephen Hsu, Charles Ying & Fei Zhao. (2013) The nature of friction: A critical assessment. Friction 2:1, pages 1-26.
Crossref
Marc Legros. (2014) In situ mechanical TEM: Seeing and measuring under stress with electrons. Comptes Rendus. Physique 15:2-3, pages 224-240.
Crossref
D. González, J. Alkorta, J.M. Martínez-Esnaola & J. Gil Sevillano. (2014) Numerical analysis of the indentation size effect using a strain gradient crystal plasticity model. Computational Materials Science 82, pages 314-319.
Crossref
Upadrasta Ramamurty & Jae-il Jang. (2014) Nanoindentation for probing the mechanical behavior of molecular crystals–a review of the technique and how to use it. CrystEngComm 16:1, pages 12-23.
Crossref
Zhi Qin, Xiaolu Pang, Yu Yan, Lijie Qiao, Hai T. Tran & Alex A. Volinsky. (2014) Passive film-induced stress and mechanical properties of α-Ti in methanol solution. Corrosion Science 78, pages 287-292.
Crossref
Feodor M. Borodich. 2014.
225
366
.
Derming Lian. (2013) Thermal Failure of Multilayer SiGe/Si. Tribology Letters 52:3, pages 461-467.
Crossref
Sidney R Cohen & Estelle Kalfon-Cohen. (2013) Dynamic nanoindentation by instrumented nanoindentation and force microscopy: a comparative review. Beilstein Journal of Nanotechnology 4, pages 815-833.
Crossref
Andy H. Tsou & Dalia G. Yablon. 2013. Scanning Probe Microscopy in Industrial Applications. Scanning Probe Microscopy in Industrial Applications
210
231
.
Duck Hyeong Jung, Kyoung Il Moon, Seung Yong Shin & Caroline Sunyong Lee. (2013) Influence of ternary elements (X=Si, B, Cr) on TiAlN coating deposited by magnetron sputtering process with single alloying targets. Thin Solid Films 546, pages 242-245.
Crossref
Po Tsung Hsieh, Tse Chang Li, Bo Hsiung Wu, Chung Jen Chung & Jen Fin Lin. (2013) Structural and mechanical properties of pre-strained transparent conducting oxide films on flexible substrate. Surface and Coatings Technology 231, pages 443-446.
Crossref
Denis Jelagin & Per-Lennart Larsson. (2013) Nonlocal Frictional Effects at Indentation of Elastic Materials. Tribology Letters 51:3, pages 397-407.
Crossref
T. Iqbal, B. J. Briscoe, S. Yasin & P. F. Luckham. (2013) Continuous stiffness mode nanoindentation response of poly(methyl methacrylate) surfaces. Chinese Journal of Polymer Science 31:8, pages 1096-1107.
Crossref
B. K. Nowakowski, D. T. Smith, S. T. Smith, L. F. Correa & R. F. Cook. (2013) Development of a precision nanoindentation platform. Review of Scientific Instruments 84:7.
Crossref
Erik Olsson & Per-Lennart Larsson. (2013) On the Appropriate Use of Representative Stress Quantities at Correlation of Spherical Contact Problems. Tribology Letters 50:2, pages 221-232.
Crossref
Yun-Hee Lee, Yong-Il Kim, Jong Seo Park & Kwang Ho Kim. (2013) Variation of Nanoindentation Curve due to Wear of Indenter Apex and Its Correction Method. Journal of the Korean Society for Nondestructive Testing 33:2, pages 129-137.
Crossref
R. W. ARMSTRONG, W. L. ELBAN & S. M. WALLEY. (2013) ELASTIC, PLASTIC, CRACKING ASPECTS OF THE HARDNESS OF MATERIALS. International Journal of Modern Physics B 27:08, pages 1330004.
Crossref
S. Bec, J. Fontaine, M. Belin, T. Takeno & H. Miki. (2013) Propriétés mécaniques de tribofilms formés dans un contact frottant CuDLC / acier. Matériaux & Techniques 101:3, pages 304.
Crossref
Per-Lennart Larsson. (2013) On the correlation of scratch testing using separated elastoplastic and rigid plastic descriptions of the representative stress. Materials & Design 43, pages 153-160.
Crossref
M. Cabibbo & P. Ricci. (2012) True Hardness Evaluation of Bulk Metallic Materials in the Presence of Pile Up: Analytical and Enhanced Lobes Method Approaches. Metallurgical and Materials Transactions A 44:1, pages 531-543.
Crossref
D. C. Hurley. 2013. Acoustic Scanning Probe Microscopy. Acoustic Scanning Probe Microscopy
351
373
.