https://orcid.org/0000-0003-4191-0142
Citations (17)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Vinay Kumar & R. S. Mishra. (2024) Effect of multipass friction stir processing on microstructure and mechanical properties of MIG welded joints of AA6082 and AA7075. Journal of Adhesion Science and Technology 38:7, pages 1062-1080.
Read now
Read now
Pradeep Kumar Mouria, Ranganath M. Singari & Reeta Wattal. (2024) Influence of rotational tool speed on metallurgical characterization of friction stir welded joint of AZ91D and AA2024. Journal of Adhesion Science and Technology 38:6, pages 969-989.
Read now
Read now
Kulbir Singh Sandhu, Hazoor Singh, Gurpreet Singh & Hreetabh Kishore. (2024) Performance evaluation of additive TiO2, MWCNT and GNP reinforced particles on Mg AZ31 based matrix composites by friction stir processing. Journal of Adhesion Science and Technology 38:5, pages 637-653.
Read now
Read now
Saeid Sajjadi Nikoo, Fathallah Qods & Mohammad Yousefieh. (2024) Microstructure evolution and mechanical properties of friction stir welded joint of ultrafine-grained dissimilar AA2024/AA5083 composite fabricated by accumulative roll bonding. Journal of Adhesion Science and Technology 38:1, pages 92-114.
Read now
Read now
Shwetanshu Gaurav, R.S. Mishra & M. Zunaid. (2023) Enhancement of microstructure and mechanical properties of similar and dissimilar aluminium alloy by friction stir welding/processing using nanoparticles: a review. Journal of Adhesion Science and Technology 37:22, pages 3125-3166.
Read now
Read now
M. Avadi Ammal & J. Sudha. Optimization of process parameters for improved surface characteristics in friction stir processed AA6061-ZrO2-GNP surface composite. Advances in Materials and Processing Technologies 0:0, pages 1-25.
Read now
Read now
Md Saquib Bin Reyaz & Amar Nath Sinha. Exploring the influence of pin geometry on metallurgical and mechanical characteristics of dissimilar aluminum TIG welds via friction stir processing. Journal of Adhesion Science and Technology 0:0, pages 1-24.
Read now
Read now
Mingxiao Shi, Jingyong Li, Weidong Mao, Zhidong Yang & Xiang Ma. Strengthening the HAZ of an MIG welded joint of 6082-T6 aluminum alloy via mechanical-thermal hybrid aging treatment. Journal of Adhesion Science and Technology 0:0, pages 1-15.
Read now
Read now
Articles from other publishers (9)
Ibrahim Sabry, Virendra Pratap Singh, Mohammad Alkhedher, Noah E. El-Zathry, Abdel-Hamid I. Mourad & Majid Naseri. (2024) Effect of rotational speed and penetration depth on Al-Mg-Si welded T-joints through underwater and conventional friction stir welding. Journal of Advanced Joining Processes 9, pages 100207.
Crossref
Crossref
Rajeev Rana, D. B. Karunakar, Anish Karmakar & Thomas Mathew. (2024) Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing. Journal of Materials Engineering and Performance.
Crossref
Crossref
Abhishek Saxena, Kuldeep K. Saxena, Bharat Singh, S. K. Rajput & Balram Yelamasetti. (2023) Study and effect of GTAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique. International Journal on Interactive Design and Manufacturing (IJIDeM) 18:3, pages 1231-1241.
Crossref
Crossref
Pradeep Kumar Mouria, Ranganath M. Singari & Reeta Wattal. (2023) Microstructural and mechanical response of SiC and TiO2 particles reinforced friction stir welded AA7075 and AA2024. International Journal on Interactive Design and Manufacturing (IJIDeM) 18:3, pages 1331-1343.
Crossref
Crossref
Srikanth Karumuri, Barun Haldar, A. Pradeep, Sai Ashish Kumar Karanam, M. Naga Swapna Sri, P. Anusha, N. Sateesh, Ram Subbiah & S. Vijayakumar. (2023) Multi-objective optimization using Taguchi based grey relational analysis in friction stir welding for dissimilar aluminium alloy. International Journal on Interactive Design and Manufacturing (IJIDeM) 18:3, pages 1627-1644.
Crossref
Crossref
Ajit Kumar Yadav, Manoj Kr. Agrawal, Kuldeep K. Saxena & Balram Yelamasetti. (2023) Effect of GTAW process parameters on weld characteristics and microstructural studies of dissimilar welded joints of AA5083 and AA6082: optimization technique. International Journal on Interactive Design and Manufacturing (IJIDeM) 18:3, pages 1151-1160.
Crossref
Crossref
Gaurav Pant, B Vijay Krishna, Noor kadhim Abed, Amandeep Nagpal, Asha V & Ankit Meheta. (2024) Advances in Dental Materials: Bioactive Glass and Ceramic Composites: A Review. E3S Web of Conferences 505, pages 01026.
Crossref
Crossref
Bhiksha Gugulothu, P. S. Satheesh Kumar, N. Srinivasa Rao, S. Vijayakumar, D. R. Rajkumar, T. V. Janardhana Rao & M. Naga Swapna Sri. 2024. 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023). 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023)
131
138
.
Bharat Singh Chittoriya, Arvind Jayant & Rakesh Kumar. (2023) Effect of Multipass FSP and (SiC + TiB2) Nanoparticles on the Mechanical and Metallurgical Characteristic of the Hybrid Metal Matrix Composite. Silicon 15:18, pages 7927-7941.
Crossref
Crossref