Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 31, 2016 - Issue 5
Submit an article Journal homepage
6,102
Views
242
CrossRef citations to date
0
Altmetric
Review

Fabrication and Machining of Metal Matrix Composites: A Review

Preetkanwal Singh BainsIKG Punjab Technical University, Kapurthala, IndiaCorrespondence[email protected]
,
Sarabjeet Singh SidhuDepartment of Mechanical Engineering, BCET, Gurdaspur, Punjab, India
&
H. S. PayalDepartment of Mechanical Engineering, St. Soldier Institute of Engineering and Technology, Jalandhar, Punjab, India
Pages 553-573 | Received 07 Jan 2015, Accepted 03 Mar 2015, Published online: 02 Sep 2015

Citations (242)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (35)

Seren Senol, Antonio Cutolo, Amit Datye, Brecht Van Hooreweder & Kim Vanmeensel. (2023) Enhanced fatigue life of additively manufactured high-strength TiB2-reinforced Al-Cu-Mg-Ag composite through in-process surface modification during hybrid laser processing. Virtual and Physical Prototyping 18:1.
Read now
S Soumyaranjan Baliarsingh, Abhishek Gautam Tripathy, Barada Prasanna Sahoo, Diptikanta Das, Rasmi Ranjan Behera, Mantra Prasad Satpathy & Ramanuj Kumar. (2023) Comprehensive review on fabrication methods of metal matrix composites and a case study on squeeze casting. Advances in Materials and Processing Technologies 0:0, pages 1-24.
Read now
Alok Ranjan, Harish Kumar, Leeladhar Nagdeve, Abhishek Mishra, Gajendra Kumar Gaurav & Jiří Jaromír Klemeš. (2022) Mechanical properties of rice husk ash, an environmental pollutant, based composites: A step towards sustainable hybrid composites. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44:4, pages 9584-9602.
Read now
Arvind M Sankhla, Kaushik M Patel, Mayur A Makhesana, Kuldeep K Saxena & Nakul Gupta. (2022) Experimental Investigation of Tool Wear in Machining of SiC Based Al-MMC. Advances in Materials and Processing Technologies 8:sup2, pages 635-654.
Read now
Vivudh Gupta, Balbir Singh & R.K. Mishra. (2022) Machinability assessment of AA7075 composite reinforced with rice husk ash using spark erosion machining process. Advances in Materials and Processing Technologies 0:0, pages 1-12.
Read now
V. K. Parikh, V. J. Badheka, A. D. Badgujar & N. D. Ghetiya. (2021) Fabrication and processing of aluminum alloy metal matrix composites. Materials and Manufacturing Processes 36:14, pages 1604-1617.
Read now
Silani Sahoo, Bharat Bhushan Jha & Animesh Mandal. (2021) Powder metallurgy processed TiB2-reinforced steel matrix composites: a review. Materials Science and Technology 37:14, pages 1153-1173.
Read now
Farhan Ahmad Shamim, Akshay Dvivedi & Pradeep Kumar. (2021) On near-dry wire ECDM of Al6063/SiC/10p MMC. Materials and Manufacturing Processes 36:1, pages 122-134.
Read now
A. Cunha, R. Ferreira, B. Trindade, F. S. Silva & O. Carvalho. (2020) Reinforcement of a laser-textured 316L steel with CuCoBe-diamond composites through laser sintering. Materials and Manufacturing Processes 35:9, pages 1032-1039.
Read now
Rita Ferreira, Jorge Martins, Óscar Carvalho, Luis Sobral, Sandra Carvalho & Filipe Silva. (2020) Tribological solutions for engine piston ring surfaces: an overview on the materials and manufacturing. Materials and Manufacturing Processes 35:5, pages 498-520.
Read now
R. Meenakshi & P. Suresh. (2020) WEDM of Cu/WC/SiC composites: development and machining parameters using artificial immune system. Journal of Experimental Nanoscience 15:1, pages 12-25.
Read now
Balasubramanian K, Nataraj M & Palanisamy Duraisamy. (2019) Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites. Materials and Manufacturing Processes 34:12, pages 1389-1400.
Read now
Padmakumar A. Bajakke, Vinayak R. Malik & Anand S. Deshpande. (2019) Particulate metal matrix composites and their fabrication via friction stir processing – a review. Materials and Manufacturing Processes 34:8, pages 833-881.
Read now
A. Manivannan & R. Sasikumar. (2019) Exemplary encapsulate feeding in stir casting for quality composites. Materials and Manufacturing Processes 34:6, pages 689-694.
Read now
Navin Kumar Jha, Tarlochan Singh, Akshay Dvivedi & Shivanna Rajesha. (2019) Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s. Materials and Manufacturing Processes 34:3, pages 243-255.
Read now
V. K. Parikh, A. D. Badgujar & N. D. Ghetiya. (2019) Joining of metal matrix composites using friction stir welding: a review. Materials and Manufacturing Processes 34:2, pages 123-146.
Read now
Kenneth Kanayo Alaneme, Eloho Anita Okotete, Adetomilola Victoria Fajemisin & Michael Oluwatosin Bodunrin. (2019) Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites: a review. Arab Journal of Basic and Applied Sciences 26:1, pages 311-330.
Read now
S. Sahoo, B. B. Jha, T.S. Mahata, J. Sharma, T. S. R. Ch. Murthy & A. Mandal. (2018) Impression creep behaviour of TiB2 particles reinforced steel matrix composites. Materials Science and Technology 34:16, pages 1965-1975.
Read now
E. Suneesh & M. Sivapragash. (2018) Comprehensive studies on processing and characterization of hybrid magnesium composites. Materials and Manufacturing Processes 33:12, pages 1324-1345.
Read now
A. Gnanavelbabu, Kaliyamoorthy Rajkumar & P. Saravanan. (2018) Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites. Materials and Manufacturing Processes 33:12, pages 1313-1323.
Read now
Preetkanwal Singh Bains, Sarabjeet Singh Sidhu & H. S. Payal. (2018) Investigation of magnetic field-assisted EDM of composites. Materials and Manufacturing Processes 33:6, pages 670-675.
Read now
C. Kannan, R. Ramanujam & A. S. S. Balan. (2018) Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments. Materials and Manufacturing Processes 33:5, pages 587-595.
Read now
Jigar Suthar & K. M. Patel. (2018) Processing issues, machining, and applications of aluminum metal matrix composites. Materials and Manufacturing Processes 33:5, pages 499-527.
Read now
Silani Sahoo, Bharat Bhusana Jha, Tapas Kumar Sahoo & Animesh Mandal. (2018) Influence of reinforcement and processing on steel-based composites: Microstructure and mechanical response. Materials and Manufacturing Processes 33:5, pages 564-571.
Read now
Sandeep Rathee, Sachin Maheshwari & Arshad Noor Siddiquee. (2018) Issues and strategies in composite fabrication via friction stir processing: A review. Materials and Manufacturing Processes 33:3, pages 239-261.
Read now
Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee & Manu Srivastava. (2018) Distribution of reinforcement particles in surface composite fabrication via friction stir processing: Suitable strategy. Materials and Manufacturing Processes 33:3, pages 262-269.
Read now
Satnam Singh, Dheeraj Gupta & Vivek Jain. (2018) Processing of Ni-WC-8Co MMC casting through microwave melting. Materials and Manufacturing Processes 33:1, pages 26-34.
Read now
H. G. Prashantha Kumar & M. Anthony Xavior. (2018) Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites. Materials and Manufacturing Processes 33:1, pages 19-25.
Read now
P. M. Gopal, K. Soorya Prakash & S. Jayaraj. (2018) WEDM of Mg/CRT/BN composites: Effect of materials and machining parameters. Materials and Manufacturing Processes 33:1, pages 77-84.
Read now
P. Ashwath & M. Anthony Xavior. (2018) Effect of ceramic reinforcements on microwave sintered metal matrix composites. Materials and Manufacturing Processes 33:1, pages 7-12.
Read now
Sravan Kumar Josyula & Suresh Kumar Reddy Narala. (2017) Machinability enhancement of stir cast Al-TiCp composites under cryogenic condition. Materials and Manufacturing Processes 32:15, pages 1764-1774.
Read now
M. Hussain, V. Kumar, V. Mandal, P. K. Singh, P. Kumar & A. K. Das. (2017) Development of cBN reinforced Ti6Al4V MMCs through laser sintering and process optimization. Materials and Manufacturing Processes 32:14, pages 1667-1677.
Read now
Ram Singar Yadav & Vinod Yadava. (2017) Experimental investigations on electrical discharge diamond face surface grinding (EDDFSG) of hybrid metal matrix composite. Materials and Manufacturing Processes 32:2, pages 135-144.
Read now
Preetkanwal Singh Bains, Sarabjeet Singh Sidhu & H. S. Payal. (2016) Study of Magnetic Field-Assisted ED Machining of Metal Matrix Composites. Materials and Manufacturing Processes 31:14, pages 1889-1894.
Read now
A. Pramanik & G. Littlefair. (2016) Wire EDM Mechanism of MMCs with the Variation of Reinforced Particle Size. Materials and Manufacturing Processes 31:13, pages 1700-1708.
Read now

Articles from other publishers (207)

Guangxian Li, Jianhai Ye, Weiwei Xu, Wei Wei, Chaojiang Li & Songlin Ding. (2024) Investigation of coatings with in-situ TiX reinforcements fabricated by additive-subtractive manufacturing: Hardness, microstructure and machinability. Surface and Coatings Technology 476, pages 130271.
Crossref
Zhiqiang Zhang, Daohui Xiang, Zhipeng Zhang, Yu Zhang & Bo Zhao. (2023) Study on tribology and cutting performance of boron doped diamond composite coated tool. International Journal of Refractory Metals and Hard Materials 117, pages 106385.
Crossref
Wang Shifeng, Li Guohua, Zhou Jiawei, Liu Kaian & Zhang Shibin. (2023) Preparation and Impact‐Abrasive Wear Behavior of NbC‐Reinforced Iron Matrix Composites. Advanced Engineering Materials 25:23.
Crossref
Ali Asgari, Mohammad Sedighi & Hassan Delavar. (2023) A comparative study on the machinability of Mg-based composites: Cemented carbide and cubic boron nitride tools performance. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Crossref
M. L. Seleznev, J. D. Roy-Mayhew & J. L. Faust. (2023) Fabrication and tunable reinforcement of net-shaped aluminum matrix composite parts via 3D printing. Scientific Reports 13:1.
Crossref
Xuezheng Zhang, Wenhao Lu & Tijun Chen. (2023) Elevating strength–ductility synergy in aluminum matrix composites by multiscale and dual-structured reinforcing particulates. Journal of Materials Research 38:17, pages 4130-4143.
Crossref
Wilson Rativa-Parada & Sabrina Nilufar. (2023) Nanocarbon-Infused Metal Matrix Composites: A Review. JOM 75:9, pages 4009-4023.
Crossref
Arun Kumar Sriram Pandey, Ankit Saroj & Anshuman Srivastava. (2023) Process Parameter Optimization of Abrasive Jet, Ultrasonic, Laser Beam, Electrochemical, and Plasma Arc Machining Processes Using Optimization Techniques: A Review. SAE International Journal of Materials and Manufacturing 16:3.
Crossref
Song-Jeng Huang, Sathiyalingam Kannaiyan, Manas Sarkar & Matoke Peter Mose. (2023) Enhancement of Mechanical Behaviors and Microstructure Evolution of Nano-Nb2O5/AZ31 Composite Processed via Equal-Channel Angular Pressing (ECAP). Journal of Composites Science 7:6, pages 230.
Crossref
Jamuna Sethi, Siddhartha Das & Karabi Das. (2023) The effect of milling time, and sintering temperature and time on the microstructure-property relationship of aluminium-matrix hybrid composites. Materials Today Communications 35, pages 106242.
Crossref
Ashish Kumar Srivastava, Suryank Dwivedi, Akash Nag, Deepak Kumar, Amit Rai Dixit & Sergej Hloch. (2023) Microstructural, mechanical and tribological performance of a magnesium alloy AZ31B/Si3N4/eggshell surface composite produced by solid-state multi-pass friction stir processing. Materials Chemistry and Physics 301, pages 127694.
Crossref
M. Kantha Shoba, K. Malar Mohan, K. Parthiban, K. Pazhanivel & N. Ramadoss. (2023) Microstructure, Mechanical, and Wear Characteristics of Hard-Coated C45 Mild Steel for Spur Gear Applications. Journal of Materials Engineering and Performance.
Crossref
Gurpreet Singh Matharou & Simran Kaur. 2023. Recent Developments in Nanofibers Research. Recent Developments in Nanofibers Research.
Zhaojie Yuan, Daohui Xiang, Peicheng Peng, Zhiqiang Zhang, Binghao Li, Mingyang Ma, Zhipeng Zhang, Guofu Gao & Bo Zhao. (2023) A comprehensive review of advances in ultrasonic vibration machining on SiCp/Al composites. Journal of Materials Research and Technology 24, pages 6665-6698.
Crossref
Xiao You, Qiuqi Zhang, Jinshan Yang & Shaoming Dong. (2023) Review on 3D-printed graphene-reinforced composites for structural applications. Composites Part A: Applied Science and Manufacturing 167, pages 107420.
Crossref
Pallab Sarmah & Promod Kumar Patowari. (2022) Mechanical and Tribological Analysis of the Fabricated Al 6063-based MMCs with SiC Reinforcement Particles. Silicon 15:6, pages 2781-2796.
Crossref
Nitin Kumar Gupta, Vivek Srivastava & Nalin Somani. (2023) Self-healing materials: fabrication technique and applications—a critical review. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Bhabani Shankar Meher, Rajib Saha, Bismay Kumar Sahoo & Debasis Chaira. (2022) Effect of Wet Milling and Reinforcement Content on Iron-Multi-walled Carbon Nanotube Metal Matrix Composite Fabricated by Conventional Powder Metallurgy. Journal of Materials Engineering and Performance 32:8, pages 3755-3771.
Crossref
Vivudh Gupta, Balbir Singh & RK Mishra. (2023) Electrical discharge machining assessment of AA7075/Rice Husk Ash composite using response surface methodology. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311609.
Crossref
Yong Yang, Jiyuan Zhang & Wenhou Wei. (2023) Microstructure and mechanical properties of TiC/Ti6Al4V nanocomposites fabricated by gas–liquid reaction laser powder bed fusion. Materials Science and Engineering: A 869, pages 144829.
Crossref
Abhishek Saxena, Kuldeep K. Saxena, Vivek K. Jain, S.K. Rajput & B.N. Pathak. (2023) A review of reinforcements and process parameters for powder metallurgy-processed metal matrix composites. Materials Today: Proceedings.
Crossref
R. Venkatesh, P. Sakthivel, M. Vivekanandan, C. Ramesh Kannan, J. Phani Krishna, S. Dhanabalan, T. Thirugnanasambandham & Manaye Majora. (2023) Synthesis and Thermal Adsorption Characteristics of Silver-Based Hybrid Nanocomposites for Automotive Friction Material Application. Adsorption Science & Technology 2023, pages 1-9.
Crossref
V.K. Parikh, Vivek Patel, D.P. Pandya & Joel Andersson. (2023) Current status on manufacturing routes to produce metal matrix composites: State-of-the-art. Heliyon 9:2, pages e13558.
Crossref
Y. Kurganova, D. Vinogradov & Y. Ivanova. (2023) Features of cutting processing of disperse-filled of aluminum-matrix composite materials. E3S Web of Conferences 376, pages 01010.
Crossref
K.R. Padmavathi, R. Ramakrishnan, L. Karthikeyan, S. Tamizhselvan & S. Chezhian Babu. (2023) Comparison of the mechanical properties of micro/nano SiC/TiO2 reinforced aluminium metal matrix composites. Materials Today: Proceedings 72, pages 1996-2001.
Crossref
Desmond E.P. Klenam & W.O. Soboyejo. 2023. Comprehensive Structural Integrity. Comprehensive Structural Integrity 116 145 .
M. Sangeetha, A. Vasanthaprabhu, Kannan Sivaprakasam, S. Nithya, V. Dhinakaran & P. Gunasekar. (2021) Surface roughness analysis for newly prepared CNT-coated metal matrix: RSM approach. Applied Nanoscience 13:1, pages 693-705.
Crossref
Mahesh Choudhary, Jinesh Kumar Jain & Toshit Jain. 2023. Advances in Additive Manufacturing and Metal Joining. Advances in Additive Manufacturing and Metal Joining 267 274 .
Shailesh Dewangan, Santosh Kumar Sharma, Amit Kumar Vishvakarma & Chitrakant Tiger. 2023. Recent Trends in Product Design and Intelligent Manufacturing Systems. Recent Trends in Product Design and Intelligent Manufacturing Systems 749 758 .
Isadora Schramm Deschamps, Daniel dos Santos Avila, Enzo Vanzuita Piazera, Robinson Carlos Dudley Cruz, Claudio Aguilar & Aloisio Nelmo Klein. (2022) Design of In Situ Metal Matrix Composites Produced by Powder Metallurgy—A Critical Review. Metals 12:12, pages 2073.
Crossref
Virat Khanna, Kamaljit Singh, Santosh Kumar, Suneev Anil Bansal, Manjunatha Channegowda, Ing Kong, Mohammad Khalid & Vishal Chaudhary. (2022) Engineering Electrical and Thermal Attributes of Two-Dimensional Graphene Reinforced Copper/Aluminium Metal Matrix Composites for Smart Electronics. ECS Journal of Solid State Science and Technology 11:12, pages 127001.
Crossref
Biplab Bhattacharjee, Nabarun Biswas, Ram Naresh Rai, Kishan Choudhuri, Ankuran Saha, Apurba Das & Arijit Sinha. (2022) Stir Cast Al–Cu–SiCp Metal Matrix Composites: Effect of SiC Particles on the Mechanical Properties and Optimization of EDM Process Parameters. Journal of The Institution of Engineers (India): Series D 103:2, pages 601-610.
Crossref
G. Ramya Devi, C. B. Priya, C. Dineshbabu, R. Karthick, K. Thanigavelmurugan & Prabhu Paramasivam. (2022) Modelling and Deliberation of Multireinforcement Surface on Tribothermal Adsorption Performance of Nickel Alloy Matrix Hybrid Nanocomposite. Adsorption Science & Technology 2022, pages 1-11.
Crossref
Aruna Kotlapati & Somashekhar S. Hiremath. (2022) Machinability and parametric optimization of aluminum silicon carbide metal matrix composite (Al-SiC MMC) machined through µ-EDM. Journal of Micromanufacturing, pages 251659842211231.
Crossref
Revathy Sreekumar, Aswathy S Nair & Sreejakumari S.S. (2022) Recent trends and developments in two-dimensional materials based electrodeposited nickel nanocomposite coatings. FlatChem 36, pages 100434.
Crossref
Amarjit Singh, Jarnail Singh, Harish Singh Dhami, Manoj Kumar Sinha, Koushik Viswanathan & Ravi Kumar. (2022) Quantifying the influences of coal fly ash on rheological and compaction behaviour of iron powder and mild steel machining chips. Advanced Powder Technology 33:11, pages 103819.
Crossref
Ângela Cunha, Ana Marques, Bruno Guimarães, Flávio Bartolomeu, Filipe Samuel Silva, Michael Gasik, Bruno Trindade & Óscar Carvalho. (2022) Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds. The International Journal of Advanced Manufacturing Technology 123:3-4, pages 1341-1352.
Crossref
Haniyeh Sajjadpour & Mohammad Alipour. (2022) Investigation of microstructure, mechanical properties, and wear behavior of aluminum A380 nanocomposite reinforced with graphene nanosheets produced by spark plasma sintering technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892211311.
Crossref
Burak Birol, Banu Süngü Misirlioğlu & Öznur ÇAKIR. (2022) Investigation of magnetite concentrate utilization as reinforcement in aluminum matrix composites. Journal of Composite Materials 56:25, pages 3897-3910.
Crossref
Shihao Zhang, Haiyun Jiang, Zhixiang Fu & Qinglin Hou. (2022) Effects of solution aging on mechanical and microstructures properties of Al6092/SiC p /β-eucryptite composites . Journal of Physics: Conference Series 2353:1, pages 012006.
Crossref
Sudheer KSD, Srinivasa Rao P & Ratnam Ch. (2022) Experimental investigation on mechanical properties of AA7068/marble dust/fly ash hybrid composite processed by stir casting technique. Engineering Research Express 4:3, pages 035010.
Crossref
Xueqi Yu, Xingwang Bai, Xiqiao Shi, Xiangman Zhou & Haiou Zhang. (2022) Microstructures and properties of wire and arc additively manufactured steel matrix composites with addition of WC by gravity-driven side powder feeding. Journal of Manufacturing Processes 81, pages 236-249.
Crossref
T. Sathish, Mohanavel Vinayagam, T. Raja, A. H. Seikh, M. H. Siddique, Ram Subbiah & Beruk Hailu. (2022) Synthesis of AA8050/B4C/TiB2 Hybrid Nanocomposites and Evaluation of Computer-Aided Machining Parameters. Journal of Nanomaterials 2022, pages 1-13.
Crossref
Zhuang Liu, Changshui Gao, Xiaoyu Yu & Chao Guo. (2021) Improving Machining Localization in Abrasive-Assisted Electrochemical Jet Machining of SiCp/Al Composites using Large Standoff Distance. Arabian Journal for Science and Engineering 47:7, pages 8629-8642.
Crossref
Fouzia Gillani, Muhammad Zubair Khan & Owaisur Rahman Shah. (2022) Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites. Materials 15:12, pages 4225.
Crossref
Abhijit Bhowmik & Ajay Biswas. (2021) Wear Resistivity of Al7075/6wt.%SiC Composite by Using Grey-Fuzzy Optimization Technique. Silicon 14:8, pages 3843-3856.
Crossref
Arvind M. Sankhla, Kaushik M. Patel, Mayur A. Makhesana, Khaled Giasin, Danil Yu Pimenov, Szymon Wojciechowski & Navneet Khanna. (2022) Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route. Journal of Materials Research and Technology 18, pages 282-292.
Crossref
Viktors Mironovs, Yulia Usherenko, Irina Boiko & Jekaterina Kuzmina. (2022) Recycling of Aluminum-Based Composites Reinforced with Boron-Tungsten Fibres. Materials 15:9, pages 3207.
Crossref
Wenhou Wei, Lei Zhu, Wenjie Wu & Shuqian Fan. (2022) TiC/Ti6Al4V functionally graded composite fabricated by in-situ laser additive manufacturing via gas–liquid reaction. Journal of Alloys and Compounds 900, pages 163406.
Crossref
Arundhati Wadewale, Shakti N. Bajaj, Shivaji Raut, Pradip D. Patil, Swati B. Kale & Santosh D. More. (2022) Preparation of Nickel Ferrite Nanoparticles and its Application in Nanofluids. Advanced Materials Research 1169, pages 35-41.
Crossref
Pardeep Saini, Pradeep K. Singh & Deepak Kumar. (2022) Effect of Machining Parameters for Surface Finish and Material Removal Rate of Al-4032/SiC Composite During End Milling Using TGRA and ANN. Journal of Advanced Manufacturing Systems 21:01, pages 85-109.
Crossref
A. Grabowski, A. Lisiecki, M. Dyzia, J. Łabaj & S. Stano. (2022) The effect of laser wavelength on surface layer melting of the AlSi/SiC composite. Journal of Manufacturing Processes 75, pages 627-636.
Crossref
Thomas Anita Jones Mary Pushpa, Jebaraj David Raja Selvam, Isaac Dinaharan & Eby Peter. (2022) Electromagnetic interference shielding effectiveness of in situ-synthesized ultrafine SiC- and Al2O3-reinforced AA6061 aluminum matrix composites. Journal of Materials Science: Materials in Electronics 33:7, pages 3774-3785.
Crossref
Marcelo S. MedeirosJr.Jr. & Leonardo Gonçalves Ribeiro. (2022) Micromechanical elastoplastic limit analysis of in-plane bending of Functionally Graded Pipe elbows. Thin-Walled Structures 171, pages 108778.
Crossref
Abhijit Bhowmik, Dipankar Dey & Ajay Biswas. (2021) Characteristics Study of Physical, Mechanical and Tribological Behaviour of SiC/TiB2 Dispersed Aluminium Matrix Composite. Silicon 14:3, pages 1133-1146.
Crossref
Abbas Fadhil. (2022) EVALUATION OF SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN ELECTRICAL DISCHARGE MACHINING OF AL-ALLOY WITH 10%SIC. IIUM Engineering Journal 23:1, pages 349-357.
Crossref
Vivudh Gupta, Pawandeep Singh, Balbir Singh & R.K. Mishra. (2022) Vegetable oil based dielectric fluids for electrical discharge Machining Process: Advancements and challenges. Materials Today: Proceedings 62, pages 3129-3132.
Crossref
V.K. Parikh, A.D. Badgujar & N.D. Ghetiya. (2022) Effect of Friction stir processing parameters on microstructure and microhardness of aluminium based Metal matrix composites. Materials Today: Proceedings 62, pages 7455-7460.
Crossref
M. Ayyanar Raja, V. Manikandan, S. Suresh Kumar, P. Amuthakkannan, I. Balasubramanian, S. Joe Patrick Gnanaraj & Subramania Bala Jeshurun. (2022) Parametric investigation and optimization of AWJM process on stir cast al7075/basalt composite materials using Taguchi based grey relational analysis. Materials Today: Proceedings 60, pages 815-821.
Crossref
Md. Sazedul Islam, Md. Shahruzzaman, M. Nuruzzaman Khan, Md. Minhajul Islam, Sumaya Farhana Kabir, Abul K. Mallik, Mohammed Mizanur Rahman & Papia Haque. 2022. Renewable Polymers and Polymer-Metal Oxide Composites. Renewable Polymers and Polymer-Metal Oxide Composites 1 43 .
Ritesh Jaiswal, Anil Kumar & Rajnish Singh. 2022. Recent Trends in Industrial and Production Engineering. Recent Trends in Industrial and Production Engineering 1 22 .
Amit Chauhan, Jaswinder Singh & Saroj Bala. 2022. Advanced Composites in Aerospace Engineering Applications. Advanced Composites in Aerospace Engineering Applications 237 262 .
Esra Zengin, Hayrettin Ahlatci & Huseyin Zengin. (2021) Investigation of microstructure, tribological and corrosion properties of AISI 316 L stainless steel matrix composites reinforced by carbon nanotubes. Materials Today Communications 29, pages 102758.
Crossref
Kammuluri Baburaja, K. Venkata Subbaiah, M. P. Arunkumar, Vinod S. Bhagat & R Kiran Kumar Reddy. (2020) Vibration and Acoustic Characteristics of Aluminium Silicon Carbide Metal Matrix Composite Under Uniform and Non Uniform Thermal Environment. Silicon 13:12, pages 4715-4736.
Crossref
Srinivas Prabhu, Padmakumar Bajakke & Vinayak Malik. (2021) A review on in-situ aluminum metal matrix composites manufactured via friction stir processing: meeting on-ground industrial applications. World Journal of Engineering 18:6, pages 956-970.
Crossref
V. Bhuvaneswari, L. Rajeshkumar & K. Nimel Sworna Ross. (2021) Influence of bioceramic reinforcement on tribological behaviour of aluminium alloy metal matrix composites: experimental study and analysis. Journal of Materials Research and Technology 15, pages 2802-2819.
Crossref
Srikant, Vipin Kumar Sharma, Vinod Kumar, Ravinder Singh Joshi, Sidharth Jain & Pardeep Kumar. (2021) A Review of Recent Research on Rare Earth Particulate Composite Materials and Structures with Their Applications. Transactions of the Indian Institute of Metals 74:11, pages 2569-2581.
Crossref
Sarabjeet Singh Sidhu, Timur Rizovich Ablyaz, Preetkanwal Singh Bains, Karim Ravilevich Muratov, Evgeny Sergeevich Shlykov & Vladislav Vitalyevich Shiryaev. (2021) Parametric Optimization of Electric Discharge Machining of Metal Matrix Composites Using Analytic Hierarchy Process. Micromachines 12:11, pages 1289.
Crossref
S. V. Kurganov, A. G. Kolmakov, I. V. Kostychev & M. E. Prutskov. (2021) High-Hardness and Wear-Resistant AK12 + SiC Composite Material for Bushes. Russian Metallurgy (Metally) 2021:10, pages 1261-1264.
Crossref
A. Parveen, N. R. Chauhan & M. Suhaib. (2021) Influence of Process Parameters and Reinforcements on Aluminum Hybrid Composites Developed by Powder Metallurgy Process. Physics of Metals and Metallography 122:10, pages 1007-1013.
Crossref
Üsame Ali Usca, Mahir Uzun, Mustafa Kuntoğlu, Emine Sap & Munish Kumar Gupta. (2021) Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites. The International Journal of Advanced Manufacturing Technology 116:9-10, pages 3011-3025.
Crossref
Vipin Kumar Sharma, Vinod Kumar & Ravinder Singh Joshi. (2020) Manufacturing of stable hydrophobic surface on rare-earth oxides aluminium hybrid composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235:4, pages 899-912.
Crossref
Shanmugam Vigneshwaran, KM John, R Deepak Joel Johnson, Marimuthu Uthayakumar, V Arumugaprabu & Sundaresan T Kumaran. (2020) Conventional and unconventional machining performance of natural fibre-reinforced polymer composites: A review. Journal of Reinforced Plastics and Composites 40:15-16, pages 553-567.
Crossref
Yijin Chen, D V Vinogradov & S V Kurganov. (2021) Cutting properties of aluminum matrix composites. Journal of Physics: Conference Series 1990:1, pages 012007.
Crossref
M. Senthil Kumar, M. Vanmathi & G. Sakthivel. (2020) SiC Reinforcement in the Synthesis and Characterization of A356/AL2O3/Sic/Gr Reinforced Composite- Paving a Way for the Next Generation of Aircraft Applications. Silicon 13:8, pages 2737-2744.
Crossref
Virat Khanna, Vanish Kumar & Suneev Anil Bansal. (2021) Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: Advancement, opportunities and perspective. Materials Research Bulletin 138, pages 111224.
Crossref
M. Adam Khan, S.P. Jani, A. Senthil Kumar & S. Rajesh. (2021) Machining parameter optimization using Adam – Gene Algorithm while turning lightweight composite using ceramic cutting tools. International Journal of Lightweight Materials and Manufacture 4:2, pages 262-267.
Crossref
Bin LIN, Haoji WANG, Jinhua WEI & Tianyi SUI. (2021) Diamond wheel grinding characteristics of 3D orthogonal quartz fiber reinforced silica ceramic matrix composite. Chinese Journal of Aeronautics 34:5, pages 404-414.
Crossref
Abimbola G. Olaremu, Williams R. Adedoyin, Odunayo T. Ore & Adedapo O. Adeola. (2021) Sustainable development and enhancement of cracking processes using metallic composites. Applied Petrochemical Research 11:1, pages 1-18.
Crossref
Timur Rizovich Ablyaz, Preetkanwal Singh Bains, Sarabjeet Singh Sidhu, Karim Ravilevich Muratov & Evgeny Sergeevich Shlykov. (2021) Impact of Magnetic Field Environment on the EDM Performance of Al-SiC Metal Matrix Composite. Micromachines 12:5, pages 469.
Crossref
Wenhou Wei, Wenjie Wu, Shuqian Fan & Xuanming Duan. (2021) In-situ laser additive manufacturing of Ti6Al4V matrix composites by gas–liquid reaction in dilute nitrogen gas atmospheres. Materials & Design 202, pages 109578.
Crossref
S. Parasuraman, I. Elamvazuthi, G. Kanagaraj, Elango Natarajan & A. Pugazhenthi. (2021) Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite. Materials 14:7, pages 1726.
Crossref
Anton Perminov, Gert Bartzsch, Armin Franke, Horst Biermann & Olena Volkova. (2020) Manufacturing Fe–TiC Composite Powder via Inert Gas Atomization by Forming Reinforcement Phase In Situ. Advanced Engineering Materials 23:3.
Crossref
A. Saravanakumar, D. Ravikanth, L. Rajeshkumar, D. Balaji & M. Ramesh. (2021) Tribological Behaviour of MoS 2 and Graphite Reinforced Aluminium Matrix Composites . IOP Conference Series: Materials Science and Engineering 1059:1, pages 012021.
Crossref
Godala Shaikshavali, M. Murali Mohan, G. Praveen Kumar Yadav, S. Krishnaraj, L. Girisha & Ram Subbiah. (2021) WITHDRAWN: Analysis of parametric effect on domex steel using plasma arc Machining process. Materials Today: Proceedings.
Crossref
R. Ranga Raj, J. Yoganandh, M. S. Senthil Saravanan & S. Sathiesh Kumar. (2020) Effect of graphene addition on the mechanical characteristics of AA7075 aluminium nanocomposites. Carbon Letters 31:1, pages 125-136.
Crossref
Mustafa BabanliYusif Tanriverdiyev. (2021) RESEARCH OF Al AND Mg MATRİX HYBRİD LAMİNATED COMPOSİTE MATERİALS. ETM - Equipment, Technologies, Materials 05:01, pages 11-15.
Crossref
Alexandra O. ZhidovichAlexander M. StolinAndrey P. ChizhikovPavel M. BazhinAlexander S. Konstantinov. (2021) The effect of gas atmosphere on the coating formation by electric arc surfacing with cermet SHS electrodes of the TiB2–Co2B composition. Image Journal of Advanced Materials and Technologies 6:3, pages 216-224.
Crossref
Qiong Wan, Fuguo Li, Wenjing Wang, Junhua Hou, Wanyue Cui & Yongsheng Li. (2021) Microstructure and properties of in situ Ti–Al intermetallic compound-reinforced Al matrix composites with dispersive distribution of core–shell-like structure. Composites and Advanced Materials 30, pages 263498332110061.
Crossref
Virat Khanna, Vanish Kumar & Suneev Anil Bansal. (2021) Aluminium-Carbon Fibre Metal Matrix Composites: A Review. IOP Conference Series: Materials Science and Engineering 1033:1, pages 012057.
Crossref
V N Vivek Bhandarkar, Bhaskar Pal & S.P. Shanmuganathan. (2021) Assessment and Modelling of Cutting Forces in Turning of Aluminium Metal Matrix Composite Using Response Surface Methodology. IOP Conference Series: Materials Science and Engineering 1013:1, pages 012022.
Crossref
Tejas Pramod Naik, Sandeep Gairola, Promod Kumar Patowari & Inderdeep Singh. (2021) Wire electrical discharge machining of AA6063/B4C composite fabricated by stir-casting process. Materials Today: Proceedings 46, pages 10845-10853.
Crossref
M. Prabhakaran, C. Sivakandhan, Chevvuri Venkata Sai Ram Gopal, Sai Nikhilesh Pilla, Ram Subbiah & S. Marichamy. (2021) Machinability investigations on cupronickel MMC through unconventional machining processes. Materials Today: Proceedings 45, pages 2220-2223.
Crossref
Virat Khanna, Vanish Kumar & Suneev Anil Bansal. (2021) Effect of carbonaceous nanomaterials’ reinforcement on mechanical properties of aluminium metal-based nanocomposite: A review. Materials Today: Proceedings 38, pages 289-295.
Crossref
Ashish Kumar Srivastava, Nagendra Kumar Maurya, Amit Rai Dixit, Shashi Prakash Dwivedi, Ambuj Saxena & Manish Maurya. (2021) Experimental investigations of A359/Si3N4 surface composite produced by multi-pass friction stir processing. Materials Chemistry and Physics 257, pages 123717.
Crossref
Madhusoodhanan Geethakumari Akhil, Kaimanikal Madhurananthan Nair Sree Manu, Thazhavilai Ponnu Devaraj Rajan & Ballambettu Chandrasekhara Pai. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites 160 172 .
Gurpreet Singh Matharou & Basanta Kumar Bhuyan. 2021. Advances in Engineering Materials. Advances in Engineering Materials 377 386 .
Shoaib Sarfraz, Essam Shehab, Konstantinos Salonitis & Wojciech Suder. 2021. Additive and Subtractive Manufacturing of Composites. Additive and Subtractive Manufacturing of Composites 105 135 .
Jatinder Kumar, Dilbag Singh, Nirmal S. Kalsi & Shubham Sharma. 2021. Additive and Subtractive Manufacturing of Composites. Additive and Subtractive Manufacturing of Composites 33 51 .
Satyendra Kumar Patel, Ashwani Pratap, Priyabrata Sahoo, Binayaka Nahak & Tej Pratap. 2021. Next Generation Materials and Processing Technologies. Next Generation Materials and Processing Technologies 285 295 .
A. Gnanavelbabu, V. Arunachalam, K. T. Sunu Surendran, K. Rajkumar & E. Anandhababu. 2021. Trends in Manufacturing and Engineering Management. Trends in Manufacturing and Engineering Management 111 122 .
Chao Luo, Jun Peng, Hongyan Yan, Hui Li & Jinglong Liang. 2021. TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings 935 942 .
Yanke Xu, Hongyan Yan, Chao Luo, Hui Li & Jinglong Liang. 2021. TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings 409 417 .
Qi Wu & Liangchi Zhang. (2020) Microstructure-based three-dimensional characterization of chip formation and surface generation in the machining of particulate-reinforced metal matrix composites. International Journal of Extreme Manufacturing 2:4, pages 045103.
Crossref
S. Vigneshwaran, R. Sundarakannan, K.M. John, R. Deepak Joel Johnson, K. Arun Prasath, S. Ajith, V. Arumugaprabu & M. Uthayakumar. (2020) Recent advancement in the natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production 277, pages 124109.
Crossref
Cécile Escaich, Zhongde Shi, Luc Baron & Marek Balazinski. (2020) Machining of Titanium Metal Matrix Composites: Progress Overview. Materials 13:21, pages 5011.
Crossref
Ali Beheshtipour, Seyed Mostafa Mahdizadeh, Davoud Khademi, Elahe Khodeir & Hamidreza Emamiyan. (2019) Comparison of Mechanical Properties and Corrosion Behavior of Al-NanoAl2O3 with Al-MicroAl2O3 Composites Made by SPS Process. Metals and Materials International 26:11, pages 1697-1709.
Crossref
Wenhou Wei, Qi Zhang, Wenjie Wu, Hongzhong Cao, Jun Shen, Shuqian Fan & Xuanming Duan. (2020) Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing. Scripta Materialia 187, pages 310-316.
Crossref
J. Vairamuthu, B. Stalin, V. Ananda Natarajan, B. Mohmed Fazil & R. Balaji. (2020) Material synthesis and spark erosion behavior of tantalum carbide based duralumin metal matrix composite. Materials Today: Proceedings.
Crossref
Ashish Kumar Singh, Sanjay Soni & Ravindra Singh Rana. (2020) A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities. Advanced Engineering Materials 22:10.
Crossref
Çağın BOLAT, İsmail Cem AKGÜN & Ali GÖKSENLİ. (2020) On the Way to Real Applications: Aluminum Matrix Syntactic Foams. European Mechanical Science 4:3, pages 131-141.
Crossref
R. Venkatesh, Vaddi Seshagiri Rao, S. Ashwin kannan & S.M. Mullaikodi. (2020) Analysis and Optimization of Abrasive water Jet Machiningprocesses on the hybrid nano particle reinforced Aluminum alloy matrix composite material. IOP Conference Series: Materials Science and Engineering 923:1, pages 012037.
Crossref
Mohd Bilal Naim Shaikh, Tariq Aziz, Sajjad Arif, Akhter H. Ansari, Panagiotis G. Karagiannidis & Mohammad Uddin. (2020) Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites. Surfaces and Interfaces 20, pages 100598.
Crossref
Ji-Peng Chen, Lin Gu & Guo-Jian He. (2020) A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites. Advances in Manufacturing 8:3, pages 279-315.
Crossref
Robert Sika, Michał Rogalewicz, Paweł Popielarski, Dorota Czarnecka-Komorowska, Damian Przestacki, Katarzyna Gawdzińska & Paweł Szymański. (2020) Decision Support System in the Field of Defects Assessment in the Metal Matrix Composites Castings. Materials 13:16, pages 3552.
Crossref
Gustavo Henrique Truppel, Marcelo Augusto Rosa, Milton Pereira & Paulo Antônio Pereira Wendhausen. (2020) Laser power influence on track’s geometry and microstructure aspects of Fe and Sn-based alloy processed by directed energy deposition. Journal of Laser Applications 32:3.
Crossref
A Raja Annamalai, Johny James, P Kuppan, S Hemakumar & Chun-Ping Jen. (2020) Studies on mechanical property of squeeze cast and heat treated AA6061-ZrO 2 composite . Materials Research Express 7:8, pages 086506.
Crossref
Guangxian Li, Khurram Munir, Cuie Wen, Yuncang Li & Songlin Ding. (2020) Machinablility of titanium matrix composites (TMC) reinforced with multi-walled carbon nanotubes. Journal of Manufacturing Processes 56, pages 131-146.
Crossref
Pei WANG, Jürgen ECKERT, Konda-gokuldoss PRASHANTH, Ming-wei WU, Ivan KABAN, Li-xia XI & Sergio SCUDINO. (2020) A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting. Transactions of Nonferrous Metals Society of China 30:8, pages 2001-2034.
Crossref
Ravi Butola, Vaibhav Sharma, Susheem Kanwar, Lakshay Tyagi, Ranganath M. Singari & Mohit Tyagi. (2020) Optimizing the machining variables in CNC turning of aluminum based hybrid metal matrix composites. SN Applied Sciences 2:8.
Crossref
Sweta Rani Biswal & Seshadev Sahoo. (2020) Fabrication of WS2 Dispersed Al-Based Hybrid Composites Processed by Powder Metallurgy: Effect of Compaction Pressure and Sintering Temperature. Journal of Inorganic and Organometallic Polymers and Materials 30:8, pages 2971-2978.
Crossref
Samuel Olukayode Akinwamide, Bolanle Tolulope Abe, Ojo Jeremiah Akinribide, Babatunde Abiodun Obadele & Peter Apata Olubambi. (2020) Characterization of microstructure, mechanical properties and corrosion response of aluminium-based composites fabricated via casting—a review. The International Journal of Advanced Manufacturing Technology 109:3-4, pages 975-991.
Crossref
Mingyang Zhang, Min Li, Jing Chi, Shufeng Wang, Min Fang, Chao Zhou, Bin Liang & Junxian Xue. (2020) In-situ (Ti,Nb)C reinforced Ni-based coatings: New insights into microstructure evolution, enhanced phase configuration behavior and tribological properties. Ceramics International 46:9, pages 14161-14172.
Crossref
K. V. V. N. R. Chandra Mouli, Balla Srinivasa Prasad, A. V. Sridhar & Sandeep Alanka. (2020) A review on multi sensor data fusion technique in CNC machining of tailor-made nanocomposites. SN Applied Sciences 2:5.
Crossref
Zhuang Liu, Changshui Gao, Yi Qiu & Chao Guo. (2020) Investigation on Electrochemical Jet Machining of High Volume Fraction SiCp/Al Composite. International Journal of Electrochemical Science 15:4, pages 3164-3179.
Crossref
Sohail M. A. K. Mohammed & Daolun L. Chen. (2019) Carbon Nanotube‐Reinforced Aluminum Matrix Composites. Advanced Engineering Materials 22:4, pages 1901176.
Crossref
M. Muralimanokar, Vignesh R. Vaira, R. Padmanaban & Priyadharshini G. Suganya. (2020) Characterization of AZ31-NbC surface composite fabricated by friction stir processing. Koroze a ochrana materialu 64:1, pages 29-37.
Crossref
D. Maneiah, M. Shunmugasundaram, A. Raji Reddy & Zareena Begum. (2020) Optimization of machining parameters for surface roughness during abrasive water jet machining of aluminium/magnesium hybrid metal matrix composites. Materials Today: Proceedings.
Crossref
Anupama Hiremath & Ritesh Bhat. (2020) Experimental analysis of the thermal properties of fused quartz-reinforced Al-6061alloy matrix composites using RSM approach. Journal of Mechanical Science and Technology 34:3, pages 1091-1097.
Crossref
Niranjan Channagiri Anandatirthachar, S. Srinivas & M. Ramachandra. 2020. Magnesium - The Wonder Element for Engineering/Biomedical Applications. Magnesium - The Wonder Element for Engineering/Biomedical Applications.
T Ablyaz, K Muratov, E Shlykov, E Morozov, V Karmanov, T Shakirzianov, S S Sarabjeet & D Sahil. (2020) Electrical discharge machining of polymer composite materials. IOP Conference Series: Materials Science and Engineering 754, pages 012013.
Crossref
Preetkanwal Singh Bains, Marjan Bahraminasab, Sarabjeet Singh Sidhu & Gurpreet Singh. (2019) On the machinability and properties of Ti–6Al–4V biomaterial with n-HAp powder–mixed ED machining. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 234:2, pages 232-242.
Crossref
Zhuang Liu, Chao Guo, Yi Qiu & Changshui Gao. (2020) Electrochemical Jet Machining of High Volume Fraction SiCp/Al Composite using Electrolyte of Sodium Chloride. IOP Conference Series: Earth and Environmental Science 440:2, pages 022006.
Crossref
Abhijit Bhowmik, Dipankar Dey & Ajay Biswas. (2020) Tribological behaviour of Aluminium-Titanium Diboride (Al7075-TiB2) Metal Matrix Composites prepared by stir casting process. Materials Today: Proceedings 26, pages 2000-2004.
Crossref
Jigar Suthar & Kaushik Patel. (2020) Effect of percentage reinforcement on mechanical and tribological properties of AHMMCs. Materials Today: Proceedings 32, pages 445-451.
Crossref
M. Shunmugasundaram, A. Praveen Kumar, L. Ponraj Sankar & S. Sivasankar. (2020) Experimental investigation and process parameters optimization of stir cast aluminium metal matrix composites to improve material removal rate. Materials Today: Proceedings.
Crossref
Amar Sheelwant, Suresh Kumar Reddy Narala & Palaparty Shailesh. (2020) Synthesis and tribological evaluation of aluminum-titanium diboride (Al-TiB2) metal matrix composite. Materials Today: Proceedings 28, pages 651-658.
Crossref
Mohit Kumar Saini, Ashok Kumar Bagha & Sanjay Kumar. (2020) Experimental study to measure the transmission loss of double panel natural fibers. Materials Today: Proceedings 26, pages 482-486.
Crossref
L. Rajesh kumar, A. Saravanakumar, V. Bhuvaneswari, G. Gokul, D. Dinesh kumar & M.P. Jithin karunan. (2020) Optimization of wear behaviour for AA2219-MoS2 metal matrix composites in dry and lubricated condition. Materials Today: Proceedings 27, pages 2645-2649.
Crossref
S. Dinesh Kumar, M. Ravichandran, S.V. Alagarsamy, M. Meignanamoorthy & S. Sakthivelu. (2020) Effect of EDM process parameters on material removal rate and surface roughness of metal matrix composites: A review. Materials Today: Proceedings 21, pages 616-618.
Crossref
H.Z. Zhang, H.Y. Wang, F.F. Liu & L. Wang. (2020) Investigation on femtosecond laser ablative processing of SiCp/AA2024 composites. Journal of Manufacturing Processes 49, pages 227-233.
Crossref
Qiulin Niu, Lu Jing, Chunhao Wang, Shujian Li, Xinyi Qiu, Changping Li & Daohui Xiang. (2019) Study on effect of vibration amplitude on cutting performance of SiCp/Al composites during ultrasonic vibration–assisted milling. The International Journal of Advanced Manufacturing Technology 106:5-6, pages 2219-2225.
Crossref
Suresh Gudipudi, Selvaraj Nagamuthu, Kanmani Subbu Subbian & Surya Prakasa Rao Chilakalapalli. 2020. Advances in Applied Mechanical Engineering. Advances in Applied Mechanical Engineering 1011 1019 .
Venkateshwar Reddy Pathapalli, Veerabhadra Reddy Basam, Suresh Kumar Gudimetta & Madhava Reddy Koppula. (2019) Optimization of machining parameters using WASPAS and MOORA. World Journal of Engineering 17:2, pages 237-246.
Crossref
P. Venkateshwar Reddy, P. Rajendra Prasad, D. Mohana Krishnudu & E. Venugopal Goud. (2019) An Investigation on Mechanical and Wear Characteristics of Al 6063/TiC Metal Matrix Composites Using RSM. Journal of Bio- and Tribo-Corrosion 5:4.
Crossref
Zhichao Niu & Kai Cheng. (2019) An experimental investigation on surface generation in ultraprecision machining of particle reinforced metal matrix composites. The International Journal of Advanced Manufacturing Technology 105:11, pages 4499-4507.
Crossref
Preetkanwal Singh BainsRewat MahajanSarabjeet Singh SidhuSandeep Kaur. (2019) Experimental investigation of abrasive assisted hybrid EDM of Ti-6Al-4V. Journal of Micromanufacturing 2:2, pages 123-132.
Crossref
M Y Zhang, M Li, S F Wang, J Chi, R S Hou & W K Wang. (2019) Effect of Nb on MC (M:Ti,Nb,Cr) precipitation and tribological behavior of TiC/Ni-based coating fabricated via plasma transferred arc. Materials Research Express 6:11, pages 1165c5.
Crossref
Lin Zhang, Jian Liu, Yi Yang, Gang Yang & Kyle Jiang. (2019) Reprint of: Sintering of BN/cemented carbide composites under an electric field for improved mechanical performances. Materials Science and Engineering: A 766, pages 138411.
Crossref
T S Senthilkumar & R Muralikannan. (2019) Evaluation of recast layer and parametric optimization of EDM process on aluminium based HMMCs using grey relational analysis. Materials Research Express 6:10, pages 1065a6.
Crossref
Zhirong Liao, Ali Abdelhafeez, Haonan Li, Yue Yang, Oriol Gavalda Diaz & Dragos Axinte. (2019) State-of-the-art of surface integrity in machining of metal matrix composites. International Journal of Machine Tools and Manufacture 143, pages 63-91.
Crossref
Parakh Agarwal, Abhimanyu Kishore, Vishnu Kumar, Sourabh Kumar Soni & Benedict Thomas. (2019) Fabrication and machinability analysis of squeeze cast Al 7075/h-BN/graphene hybrid nanocomposite. Engineering Research Express 1:1, pages 015004.
Crossref
Lin Zhang, Jian Liu, Yi Yang, Gang Yang & Kyle Jiang. (2019) Sintering of BN/cemented carbide composites under an electric field for improved mechanical performances. Materials Science and Engineering: A 761, pages 138018.
Crossref
Akhil Khajuria, Modassir Akhtar, Manish Kumar Pandey, Mayur Pratap Singh, Ankush Raina, Raman Bedi & Balbir Singh. (2019) Influence of ceramic Al 2 O 3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs . World Journal of Engineering 16:4, pages 526-538.
Crossref
Vipin Kumar Sharma, Vinod Kumar & Ravinder Singh Joshi. (2019) Experimental investigation on effect of RE oxides addition on tribological and mechanical properties of Al-6063 based hybrid composites. Materials Research Express 6:8, pages 0865d7.
Crossref
Mohammadreza Shabgard, Mohammad Rezaei Zaki & Hossein Abbasi. (2019) Experimental investigation on the effect of SiC particles in machining process of Al–5.3%CU-SiCp–Al2O3p hybrid nanocomposite by EDM. SN Applied Sciences 1:5.
Crossref
Silani Sahoo, Bharat B. Jha, Tarasankar Mahata, Jyothi Sharma, Tammana S. R. Ch. Murthy & Animesh Mandal. (2019) Mechanical and Wear Behaviour of Hot-Pressed 304 stainless Steel Matrix Composites Containing TiB2 Particles. Transactions of the Indian Institute of Metals 72:5, pages 1153-1165.
Crossref
T Ablyaz, K Muratov, S B Preetkanwal & S S Sarabjeet. (2019) Experimental investigation of wear resistance of copper coated electrode-tool during electrical discharge machining. IOP Conference Series: Materials Science and Engineering 510, pages 012001.
Crossref
Ram Singar Yadav & Vinod Yadava. (2018) Hybrid design-based modelling and multi-objective optimization of hybrid machining of hybrid metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:7, pages 2275-2301.
Crossref
Kunal Chopra, Aishwarya Payla & Eswara Krishna Mussada. (2019) Detailed Experimental Investigations on Machinability of EN31 Steel by WEDM. Transactions of the Indian Institute of Metals 72:4, pages 919-927.
Crossref
Jinguang Du, Wuyi Ming, Yang Cao, Jun Ma, Wenbin He & Xiaoke Li. (2019) Particle Removal Mechanism of High Volume Fraction SiCp/Al Composites by Single Diamond Grit Tool. Journal of Wuhan University of Technology-Mater. Sci. Ed. 34:2, pages 324-331.
Crossref
Gökhan SUR & İsmail KAYABAŞI. (2019) Hafif Metal Ana Fazlı Kompozit Malzeme Üretim Sisteminin Tasarım, İmalat Ve Performansının İncelenmesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 7:1, pages 63-79.
Crossref
Saurav Misra, Manowar Hussain, Ankit Gupta, Vikas Kumar, Shakti Kumar & Alok Kumar Das. (2019) Fabrication and characteristic evaluation of direct metal laser sintered SiC particulate reinforced Ti6Al4V metal matrix composites. Journal of Laser Applications 31:1.
Crossref
Preetkanwal Singh Bains, Sarabjeet Singh Sidhu, H. S. Payal & Sandeep Kaur. (2018) Magnetic Field Influence on Surface Modifications in Powder Mixed EDM. Silicon 11:1, pages 415-423.
Crossref
Jinguang Du, Haizhen Zhang, Wenbin He, Jun Ma, Wuyi Ming & Yang Cao. (2018) Simulation and Experimental Study on Surface Formation Mechanism in Machining of SiCp/Al Composites. Applied Composite Materials 26:1, pages 29-40.
Crossref

Displaying 200 of 242 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.