652
Views
189
CrossRef citations to date
0
Altmetric
Articles

On particle adhesion and removal mechanisms in turbulent flows

&
Pages 763-785 | Published online: 02 Apr 2012

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (38)

E. M. Esders, C. Georgi, W. Babel & C. K. Thomas. (2022) Quantitative detection of aerial suspension of particles with a full-frame visual camera for atmospheric wind tunnel studies. Aerosol Science and Technology 56:6, pages 530-544.
Read now
M. Hodaei, V. Rabbani, P. Maghoul, A. Bahari, K. Farhang & N. Wu. (2020) Analytical modeling of contact mechanics of helical gear tooth by considering surface roughness effects. Journal of Adhesion Science and Technology 34:20, pages 2176-2199.
Read now
Babak Nasr, Goodarz Ahmadi, Andrea R. Ferro & Suresh Dhaniyala. (2020) A model for particle removal from surfaces with large-scale roughness in turbulent flows. Aerosol Science and Technology 54:3, pages 291-303.
Read now
Babak Nasr, Goodarz Ahmadi, Andrea R. Ferro & Suresh Dhaniyala. (2019) Overview of mechanistic particle resuspension models: comparison with compilation of experimental data. Journal of Adhesion Science and Technology 33:24, pages 2631-2660.
Read now
Benjamin Figgis, Bing Guo, Wasim Javed, Said Ahzi & Yves Rémond. (2018) Dominant environmental parameters for dust deposition and resuspension in desert climates. Aerosol Science and Technology 52:7, pages 788-798.
Read now
Jana Kesavan, Pam Humphreys, Babak Nasr, Goodarz Ahmadi, Craig K. Knox, Erica Valdes, Vipin Rastogi & Suresh Dhaniyala. (2017) Experimental and computational study of reaerosolization of 1 to 5 μm PSL microspheres using jet impingement. Aerosol Science and Technology 51:3, pages 377-387.
Read now
Yoojeong Kim, Glyn Wellum, Kerrianne Mello, Kenneth E. Strawhecker, Richard Thoms, Arjan Giaya & Barbara E. Wyslouzil. (2016) Effects of relative humidity and particle and surface properties on particle resuspension rates. Aerosol Science and Technology 50:4, pages 339-352.
Read now
Iman Goldasteh, Goodarz Ahmadi & Andrea R. Ferro. (2015) Particle Detachment from Rough Surfaces in Turbulent Flows: An Analytical Expression for Resuspension Fraction. Particulate Science and Technology 33:5, pages 539-545.
Read now
Iman Goldasteh, Goodarz Ahmadi & Andrea R. Ferro. (2013) Wind tunnel study and numerical simulation of dust particle resuspension from indoor surfaces in turbulent flows. Journal of Adhesion Science and Technology 27:14, pages 1563-1579.
Read now
Asmaa Sadek Kassab, VictorM. Ugaz, MariaD. King & YassinA. Hassan. (2013) High Resolution Study of Micrometer Particle Detachment on Different Surfaces. Aerosol Science and Technology 47:4, pages 351-360.
Read now
B. Sajadi, M.H. Saidi, G. Ahmadi, S.M. Kenney & J. Taylor. (2013) On the Induced Airflow and Particle Resuspension Due to a Falling Disk. Particulate Science and Technology 31:2, pages 190-198.
Read now
Yoshihiro Kubota & Hiroshi Higuchi. (2013) Aerodynamic Particle Resuspension Due to Human Foot and Model Foot Motions. Aerosol Science and Technology 47:2, pages 208-217.
Read now
Basman Elhadidi & H. Ezzat Khalifa. (2013) Aerodynamic Resuspension of Particles Due to a Falling Flat Disk. Particulate Science and Technology 31:1, pages 35-44.
Read now
Iman Goldasteh, Goodarz Ahmadi & Andrea Ferro. (2012) A Model for Removal of Compact, Rough, Irregularly Shaped Particles from Surfaces in Turbulent Flows. The Journal of Adhesion 88:9, pages 766-786.
Read now
Yangying Zhu, Bin Zhao, Bin Zhou & Zhongchao Tan. (2012) A Particle Resuspension Model in Ventilation Ducts. Aerosol Science and Technology 46:2, pages 222-235.
Read now
Xinyu Zhang & Goodarz Ahmadi. (2011) Effects of Electrostatic and Capillary Forces and Surface Deformation on Particle Detachment in Turbulent Flows. Journal of Adhesion Science and Technology 25:11, pages 1175-1210.
Read now
Ilgaz Akseli, Mohammad Miraskari, Huan Zhang, Weiqiang Ding & Cetin Cetinkaya. (2011) Non-Contact Rolling Bond Stiffness Characterization of Polyvinylpyrrolidone (PVP) Particles. Journal of Adhesion Science and Technology 25:4-5, pages 407-434.
Read now
AllisonR. Harris & CliffI. Davidson. (2008) Particle Resuspension in Turbulent Flow: A Stochastic Model for Individual Soil Grains. Aerosol Science and Technology 42:8, pages 613-628.
Read now
Xinyu Zhang, Goodarz Ahmadi, Jing Qian & Andrea Ferro. (2008) Particle Detachment, Resuspension and Transport Due to Human Walking in Indoor Environments. Journal of Adhesion Science and Technology 22:5-6, pages 591-621.
Read now
M. D. Murthy Peri & Cetin Cetinkaya. (2008) Adhesion Characterization Based on Rolling Resistance of Individual Microspheres on Substrates: Review of Recent Experimental Progress. Journal of Adhesion Science and Technology 22:5-6, pages 507-528.
Read now
Bilsay Sümer & Metin Sitti. (2008) Rolling and Spinning Friction Characterization of Fine Particles Using Lateral Force Microscopy Based Contact Pushing. Journal of Adhesion Science and Technology 22:5-6, pages 481-506.
Read now
Goodarz Ahmadi & Shiguang Guo. (2007) Bumpy Particle Adhesion and Removal in Turbulent Flows Including Electrostatic and Capillary Forces. The Journal of Adhesion 83:3, pages 289-311.
Read now
H. Ezzat Khalifa & Basman Elhadidi. (2007) Particle Levitation Due to a Uniformly Descending Flat Object. Aerosol Science and Technology 41:1, pages 33-42.
Read now
Goodarz Ahmadi, Shiguang Guo & Xinyu Zhang. (2007) Particle Adhesion and Detachment in Turbulent Flows Including Capillary Forces. Particulate Science and Technology 25:1, pages 59-76.
Read now
Xinyu Zhang & Goodarz Ahmadi. (2007) Effects of capillary force and surface deformation on particle removal in turbulent flows. Journal of Adhesion Science and Technology 21:16, pages 1589-1611.
Read now
Goodarz Ahmadi, Haifeng Zhang, Ruijing Han & Bernard Greenspan. (2005) Removal of Particle Pairs from a Plane Surface. The Journal of Adhesion 81:2, pages 189-212.
Read now
Christopher Toscano & Goodarz Ahmadi. (2003) Particle removal mechanisms in cryogenic surface cleaning. The Journal of Adhesion 79:2, pages 175-201.
Read now
Jiadao Lin & Cetin Cetinkaya. (2003) Potential thermo-mechanical substrate damage in nanoparticle removal with pulsed lasers . Journal of Adhesion Science and Technology 17:1, pages 91-113.
Read now
C. Cetinkaya, J. Lin, R. Vanderwood & C. Li. (2002) Nanoparticle removal with a pulsed laser: thermoelastic transient surface acceleration simulations for analyzing edge effects . Journal of Adhesion Science and Technology 16:14, pages 1979-2003.
Read now
Cetin Cetinkaya, Richard Vanderwood & Matthew Rowell. (2002) Nanoparticle removal from substrates with pulsed-laser induced plasma and shock waves . Journal of Adhesion Science and Technology 16:9, pages 1201-1214.
Read now
Haifeng Zhang & Goodarz Ahmadi. (2000) Aerosol Particle Removal and Re-entrainment in Turbulent Channel Flows – A Direct Numerical Simulation Approach. The Journal of Adhesion 74:1-4, pages 441-493.
Read now
Gary Toikka, GeoffreyM. Spinks & HughR. Brown. (2000) Interactions Between Micron-sized Glass Particles and Poly(dimethyl siloxane) in the Absence and Presence of Applied Load. The Journal of Adhesion 74:1-4, pages 317-340.
Read now
Wiesław Wójcik, Bronisław Jańczuk & Robert Ogonowski. (2000) Adhesion of a coal grain to a coal grain in an alcohol . Journal of Adhesion Science and Technology 14:13, pages 1665-1676.
Read now
Mehdi Soltani & Goodarz Ahmadi. (1999) Detachment of rough particles with electrostatic attraction from surfaces in turbulent flows. Journal of Adhesion Science and Technology 13:3, pages 325-355.
Read now
Mehdi Soltani, Fa-Gung Fan, Goodarz Ahmadi & Steven C. Hart. (1997) Detachment of rigid-link fibers with linkage contact in a turbulent boundary layer flow. Journal of Adhesion Science and Technology 11:8, pages 1017-1037.
Read now
Fa-Gung Fan, Mehdi Soltani, Goodarz Ahmadi & StevenC. Hart. (1997) Flow-Induced Resuspension of Rigid-Link Fibers from Surfaces. Aerosol Science and Technology 27:2, pages 97-115.
Read now
Mehdi Soltani & Goodarz Ahmadi. (1995) Particle Detachment from Rough Surfaces in Turbulent Flows. The Journal of Adhesion 51:1-4, pages 105-123.
Read now
Mehdi Soltani, Goodarz Ahmadi, Raymond G. Bayer & Michael A. Gaynes. (1995) Particle detachment mechanisms from rough surfaces under substrate acceleration. Journal of Adhesion Science and Technology 9:4, pages 453-473.
Read now

Articles from other publishers (151)

Hassan Salem & Ehab Mina. (2024) Effect of Nanoparticles Deposition on Cooling Performance of Photovoltaic Panels. Journal of Solar Energy Engineering 146:2.
Crossref
Dongchi Yu, Jun-Li Lin & Jin-Han Xie. (2024) Investigation on the influence of vortex generator on particle resuspension. Particuology 86, pages 126-136.
Crossref
Gregory S. Shallcross, William A. Hoey, John R. Anderson, Carlos Soares & Moogega Cooper. (2024) Modeling adhesion and aerodynamic removal of particles and spores from substrates. Journal of Aerosol Science 176, pages 106294.
Crossref
Tianlun Zhang, Zhe Dong, Weichen Huang, Wenwu Zhou, Wei Tian, Di Peng & Yingzheng Liu. (2024) In situ multi-perspective scanning of 3D particle deposition on flat plates with film cooling and determination of practical model parameters. Experimental Thermal and Fluid Science 151, pages 111109.
Crossref
Liuxi Cai, Jiawei Yao, Yanfang Hou, Shunsen wang, Yun Li & Zhenping Feng. (2023) Numerical analysis of catalyst particle deposition characteristics in a flue gas turbine with an improved particle motion and deposition model. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 237:8, pages 1790-1807.
Crossref
Khoi Ngo, N.K. Anand & Yassin Hassan. (2023) Particle deposition model for a fully developed turbulent channel flow. Nuclear Engineering and Design 414, pages 112580.
Crossref
Feng Yuan, Runming Yao, Wei Yu, Sasan Sadrizadeh, Hazim Awbi & Prashant Kumar. (2023) Dynamic characteristics of particulate matter resuspension due to human activities in indoor environments: A comprehensive review. Journal of Building Engineering 79, pages 107914.
Crossref
Jingyu Cui, Mingjun Li, Weigang Xu, Zhe Lin, Linhang Zhu & Yuzhen Jin. (2023) A numerical analysis of ash fouling characteristics in elliptical tube bundles. Applied Thermal Engineering 235, pages 121436.
Crossref
Mohammad Amin Bagrezaie, Bahram Dabir, Fariborz Rashidi & Ali Reza Moazzeni. (2023) Modeling of formation damage during smart water flooding in sandstone reservoirs. Scientific Reports 13:1.
Crossref
Lei Liu, Ying Xi, Lin Zhang, Weigang Xu, Rui Zhao, Yi Liu, Zelin Wang, Bingjie Wu & Kexin Dong. (2023) Numerical study of particle deposition characteristics in a new type of reinforced pipe. Chemical Engineering and Processing - Process Intensification 189, pages 109371.
Crossref
Yan Zhang, Kai Yue, Xin Ru Zhang & Xin Xin Zhang. (2023) Numerical Analysis of the Deposition Characteristics in the Initial Deposition Stage in RSC. Journal of Physics: Conference Series 2534:1, pages 012008.
Crossref
. (2023) Droplets impact against the random rough surface with a liquid film. Physics of Fluids 35:6.
Crossref
Vishal Chaugule, Larissa Gomes dos Reis, David F. Fletcher, Paul M. Young, Daniela Traini & Julio Soria. (2023) A varying-swirl design concept for dry powder inhalers. Journal of Aerosol Science 171, pages 106162.
Crossref
Xing Yang, Zihan Hao, Florian Seibold, Zhenping Feng, Phillip Ligrani & Bernhard Weigand. (2023) Particulate Deposition Effects on Internal Swirl Cooling of Turbine Blades. Journal of Engineering for Gas Turbines and Power 145:5.
Crossref
S.Y. Yang, H.H. Zhang, T.C. Hsiao, A.R. Ferro & A.C.K. Lai. (2023) Evaluation of human walking-induced resuspension of bacteria on different flooring materials. Building and Environment 235, pages 110218.
Crossref
Liwen He, Lili Tong & Xuewu Cao. (2023) Investigation of aerosol resuspension model based on random contact with rough surface. Nuclear Engineering and Technology 55:3, pages 989-998.
Crossref
Riccardo Friso, Alessio Suman, Alessandro Vulpio, Nicola Zanini, Nicola Casari & Michele Pinelli. (2023) Towards an innovative mechanistic model to predict the detachment process of a deposited layer. International Journal of Heat and Mass Transfer 200, pages 123525.
Crossref
Shihao Zhang, Fangyuan Wang, Baimei Tan, Wei Li, Baohong Gao & Yangang He. (2022) Recent advances and future developments in PVA brush scrubbing cleaning: A review. Materials Science in Semiconductor Processing 152, pages 107122.
Crossref
Yao Xiong, Yinhe Liu, Yu Guan, Huizhen Liu & Sajie Geng. (2022) Numerical study on dynamic ash deposition and heat transfer characteristics of radiant syngas cooler. Energy 261, pages 125252.
Crossref
Tijana Šušteršič, Aleksandar Bodić, Jelisaveta Ignjatović, Sandra Cvijić, Svetlana Ibrić & Nenad Filipović. (2022) Numerical Modeling of Particle Dynamics Inside a Dry Powder Inhaler. Pharmaceutics 14:12, pages 2591.
Crossref
Gustavo L. Muniz, Antonio P. Camargo, Filipe Signorelli, Celso A. Bertran, Diego J.S. Pereira & José A. Frizzone. (2022) Influence of suspended solid particles on calcium carbonate fouling in dripper labyrinths. Agricultural Water Management 273, pages 107890.
Crossref
Chen Zhang, Xinhua Xie, Yuan Li, Teng Zhang, Pengfei Ma, Yunsong Yu, Geoff Wang & Yongzhi Zhao. (2022) Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor. Industrial & Engineering Chemistry Research.
Crossref
Alessio Suman, Alessandro Vulpio, Michele Pinelli & Lorenzo D'Amico. (2022) Microtomography of Soil and Soot Deposits: Analysis of Three-Dimensional Structures and Surface Morphology. Journal of Engineering for Gas Turbines and Power 144:10.
Crossref
Jongmuk Won. (2022) Assessment of internal stability of sand–fine mixture using particle detachment model and its implications on suffusion. Acta Geotechnica 17:10, pages 4667-4680.
Crossref
Mohammad Amin Bagrezaie, Bahram Dabir & Fariborz Rashidi. (2022) A novel approach for pore-scale study of fines migration mechanism in porous media. Journal of Petroleum Science and Engineering 216, pages 110761.
Crossref
Samuel Peillon, Thomas Gélain, Mickaël Payet, François Gensdarmes, Christian Grisolia & Olivier Pluchery. (2022) Adhesion forces of radioactive particles measured by the Aerodynamic Method–Validation with Atomic Force Microscopy and comparison with adhesion models. Journal of Aerosol Science 165, pages 106037.
Crossref
Yulong Yang, Weifeng Yuan, Jirui Hou & Zhenjiang You. (2022) Review on physical and chemical factors affecting fines migration in porous media. Water Research 214, pages 118172.
Crossref
Kevin Akermann, Peter Renze & Wolfgang Schröder. (2022) Large-eddy simulation for solid particle transport and deposition in a helically rib-roughened pipe using an Euler-Lagrange approach. Chemical Engineering Science 253, pages 117557.
Crossref
Alessio Suman, Alessandro Vulpio, Nicola Casari & Michele Pinelli. (2022) A Stochastic Model for Nanoparticle Deposits Growth. Journal of Engineering for Gas Turbines and Power 144:1.
Crossref
Hongjuan Bai, Junhang Chen, Yumu Hu, Gang Wang, Wenju Liu & Edvina Lamy. (2022) Biocolloid transport and deposition in porous media: A review. Korean Journal of Chemical Engineering 39:1, pages 38-57.
Crossref
Zefeng Guo, Nianqi Li, Jiří Jaromír Klemeš, Qiuwang Wang & Min Zeng. (2021) Mechanisms and strategies for ash deposition reduction in flue gas heat exchanger. Clean Technologies and Environmental Policy 24:1, pages 77-93.
Crossref
Andrea R. Ferro. 2022. Handbook of Indoor Air Quality. Handbook of Indoor Air Quality 331 348 .
Andrea R. Ferro. 2021. Handbook of Indoor Air Quality. Handbook of Indoor Air Quality 1 18 .
Alessio Suman, Alessandro Vulpio, Nicola Casari & Michele Pinelli. (2021) Outstretching population growth theory towards surface contamination. Powder Technology 394, pages 597-607.
Crossref
Kruttika S. Phadke, Deepak G. Madival, Janani Venkataraman, Debosmita Kundu, K. S. Ramanujan, Nisha Holla, Jaywant Arakeri, Gaurav Tomar, Santanu Datta & Arindam Ghatak. (2021) Novel non intrusive continuous use ZeBox technology to trap and kill airborne microbes. Scientific Reports 11:1.
Crossref
Matthew Ellis, Nicholas Bojdo, Stephen Covey-Crump, Merren Jones, Antonio Filippone & Alison Pawley. (2021) Generalized Predictions of Particle-Vane Retention Probability in Gas Turbine Engines. Journal of Turbomachinery 143:11.
Crossref
Pengzhan Liu, Seokjun Hong, Sanghuck Jeon, Jaewon Lee, Donggeon Kwak, Yutaka Wada, Hirokuni Hiyama, Satomi Hamada & Taesung Kim. (2021) Investigations on the mechanism of silica particle removal during the Cu buff cleaning process. Colloids and Surfaces A: Physicochemical and Engineering Aspects 627, pages 127156.
Crossref
Attia Iram, Xinmiao Wang & Ali Demirci. (2021) Electrolyzed Oxidizing Water and Its Applications as Sanitation and Cleaning Agent. Food Engineering Reviews 13:2, pages 411-427.
Crossref
Siddharth Rajupet, Adriaan A. Riet, Qizan Chen, Mamadou Sow & Daniel J. Lacks. (2021) Relative importance of electrostatic and van der Waals forces in particle adhesion to rough conducting surfaces. Physical Review E 103:4.
Crossref
Syed Haider Abbas Rizvi, Anil Yadav, Jyoti Phirani & Vikram Singh. (2021) Deposition and Removal Studies of Asphaltene from the Glass Surface. Energy & Fuels 35:4, pages 3228-3239.
Crossref
Lin Mu, Hongchao Miao, Chen Zhao, Zhende Zhai, Yan Shang & Hongchao Yin. (2021) Dynamic CFD modeling evaluation of ash deposition behavior and morphology evolution with different tube arrangements. Powder Technology 379, pages 279-295.
Crossref
Julien R. LandelD. Ian Wilson. (2021) The Fluid Mechanics of Cleaning and Decontamination of Surfaces. Annual Review of Fluid Mechanics 53:1, pages 147-171.
Crossref
Ana María Vidales, Jesica Benito, Rodolfo Uñac, Luc Oger & Irene Ippolito. (2021) Resuspension processes in a wide range of particle sizes. EPJ Web of Conferences 249, pages 01003.
Crossref
Dongchi Yu & Fei Hu. (2021) Application of the “Rock'n’Roll” (RNR) resuspension model with non-zero slip velocities on particle and substrate surfaces. Journal of Aerosol Science 151, pages 105675.
Crossref
Karina de los Ángeles Valenzuela Aracena, Rodolfo O. Uñac, Irene Ippolito & Ana M. Vidales. (2020) Movement initiation of millimeter particles on a rotating rough surface: The role of adhesion. Particuology 53, pages 92-99.
Crossref
Pengfei Zhang, Chengzhang Xu, Jianping Kuang, Shuigang Liu, Zhiwen Xia, Ke Wu & Yuqi Huang. (2020) Investigation on the ash deposition of a radiant syngas cooler using critical velocity model. Energy Reports 6, pages 112-126.
Crossref
Yujin Cho, Hoomi Choi, Sungwon Mo & Taesung Kim. (2020) Removal of nano-sized surface particles by CO2 gas cluster collisions for dry cleaning. Microelectronic Engineering 234, pages 111438.
Crossref
Song-Zhen Tang, Ming-Jia Li, Fei-Long Wang, Ya-Ling He & Wen-Quan Tao. (2020) Fouling potential prediction and multi-objective optimization of a flue gas heat exchanger using neural networks and genetic algorithms. International Journal of Heat and Mass Transfer 152, pages 119488.
Crossref
Haichao Yu, Xiao Wu, Hanyang Li, Yonggui Yuan & Jun Yang. (2020) Particle removal is explored by the motion of individual particles based on laser-induced plasma shock wave. Optics Communications 460, pages 125205.
Crossref
Ali Nasrollahi, Ali Akbar Salehi Neyshabouri, Goodarz Ahmadi & Masoud Montazeri Namin. (2020) Numerical simulation of incipient particle motion. International Journal of Sediment Research 35:1, pages 1-14.
Crossref
Franz JoosFranz Joos. 2020. Aerodynamik axialer Turbokompressoren. Aerodynamik axialer Turbokompressoren 373 520 .
Zhiming Xu, Aodi Sun, Zhimin Han, Xiaoyan Yu & Yu Zhang. (2019) Simulation of particle deposition in a plate-fin heat exchanger using a particle deposition model with a random function method. Powder Technology 355, pages 145-156.
Crossref
Christopher P. Bowen, Nathan D. Libertowski, Mehdi Mortazavi & Jeffrey P. Bons. (2019) Modeling Deposition in Turbine Cooling Passages With Temperature-Dependent Adhesion and Mesh Morphing. Journal of Engineering for Gas Turbines and Power 141:7.
Crossref
Yunpeng Jiang, Lee Li, Ming Lu, Rumeng Wang, Yiwen Jiang, Shanfeng Liu & Chao Su. (2019) Statistical characteristics and mechanism analysis of adhered particle on surface under strong electric field. Particuology 43, pages 110-122.
Crossref
Xiaoqiang Du, Feng Jiang, Enxiao Liu, Chuanyu Wu & Fathi H. Ghorbel. (2019) Turbulent airflow dust particle removal from solar panel surface: Analysis and experiment. Journal of Aerosol Science 130, pages 32-44.
Crossref
Yang Lv, Haifeng Wang, Yuwei Zhou, Hiroshi Yoshino, Hiroshi Yonekura, Rie Takaki & Genta Kurihara. (2019) The influence of ventilation mode and personnel walking behavior on distribution characteristics of indoor particles. Building and Environment 149, pages 582-591.
Crossref
Yongtie Cai, Kunlin Tay, Zhimin Zheng, Wenming Yang, Hui Wang, Guang Zeng, Zhiwang Li, Siah Keng Boon & Prabakaran Subbaiah. (2018) Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review. Applied Energy 230, pages 1447-1544.
Crossref
D. Malekian, B. Sajadi, G. Ahmadi & M. Pirhadi. (2018) A numerical study of electric force effects on detachment and deposition of particles due to a falling disk. Journal of Aerosol Science 124, pages 133-145.
Crossref
M.M. Stempniewicz, Chen Zhipeng, Zheng Yanhua & E.M.J. Komen. (2018) Resuspension models for monolayer and multilayer deposits of graphite dust. Annals of Nuclear Energy 120, pages 186-197.
Crossref
Daehyun Choi & Hyungmin Park. (2018) Flow around in-line sphere array at moderate Reynolds number. Physics of Fluids 30:9.
Crossref
Babak Yousefi-Lafouraki, Abas Ramiar & Ali Akbar Ranjbar. (2018) Modeling of two-phase particulate flows in a confined jet with a focus on two-way coupling. Particuology 39, pages 78-87.
Crossref
Bo Feng, Jinxiu Peng, Wenpu Zhang, Guodong Luo & Huihui Wang. (2018) Removal behavior of slime from pentlandite surfaces and its effect on flotation. Minerals Engineering 125, pages 150-154.
Crossref
Lei-Yong Jiang, Yinghua Han & Prakash Patnaik. (2018) Characteristics of Volcanic Ash in a Gas Turbine Combustor and Nozzle Guide Vanes. Journal of Engineering for Gas Turbines and Power 140:7.
Crossref
Nicola CasariMichele Pinelli, Alessio Suman, Luca di Mare & Francesco Montomoli. (2018) EBFOG: Deposition, Erosion, and Detachment on High-Pressure Turbine Vanes. Journal of Turbomachinery 140:6.
Crossref
Elizabeth Jens, Barry Nakazono, Iona Brockie, David Vaughan & Marlin Klatte. (2018) Design, development and qualification of a gas-based dust removal tool for mars exploration missions. Design, development and qualification of a gas-based dust removal tool for mars exploration missions.
Yu Jiang, Lin Lu, Andrea R. Ferro & Goodarz Ahmadi. (2018) Analyzing wind cleaning process on the accumulated dust on solar photovoltaic (PV) modules on flat surfaces. Solar Energy 159, pages 1031-1036.
Crossref
Song-Zhen Tang, Ya-Ling He, Fei-Long Wang & Yu-Bing Tao. (2018) Parametric study on fouling mechanism and heat transfer characteristics of tube bundle heat exchangers for reducing fouling considering the deposition and removal mechanisms. Fuel 211, pages 301-311.
Crossref
Bekir S. Yilbas, Ghassan Hassan & Abdullah Al-Sharafi. 2018. Comprehensive Energy Systems. Comprehensive Energy Systems 832 880 .
Yan Cui & Martin Sommerfeld. (2017) Application of Lattice-Boltzmann Method for Analysing Detachment of Micron-Sized Particles from Carrier Particles in Turbulent Flows. Flow, Turbulence and Combustion 100:1, pages 271-297.
Crossref
Salini Sasidharan, Scott A. Bradford, Saeed Torkzaban, Xueyan Ye, Joanne Vanderzalm, Xinqiang Du & Declan Page. (2017) Unraveling the complexities of the velocity dependency of E. coli retention and release parameters in saturated porous media. Science of The Total Environment 603-604, pages 406-415.
Crossref
Cai Yongtie, Yang Wenming, Zheng Zhimin, Xu Mingchen, Siah Keng Boon & Prabakaran Subbaiah. (2017) Modelling of ash deposition in biomass boilers: a review. Energy Procedia 143, pages 623-628.
Crossref
A. Benabed & K. Limam. (2017) Resuspension of Indoor Particles Due to Human Foot Motion. Energy Procedia 139, pages 242-247.
Crossref
T. Lu, E. Solis-Ramos, Y.B. Yi & M. Kumosa. (2017) Particle removal mechanisms in synergistic aging of polymers and glass reinforced polymer composites under combined UV and water. Composites Science and Technology 153, pages 273-281.
Crossref
Jun-hui Zhou & Jing-zhou Zhang. (2018) Numerical investigation of particle deposition on converging slot-hole film-cooled wall. Journal of Central South University 24:12, pages 2819-2828.
Crossref
Ming-Jia Li, Song-Zhen Tang, Fei-long Wang, Qin-Xin Zhao & Wen-Quan Tao. (2017) Gas-side fouling, erosion and corrosion of heat exchangers for middle/low temperature waste heat utilization: A review on simulation and experiment. Applied Thermal Engineering 126, pages 737-761.
Crossref
Anton Manoylov, Bruno Lebon, Georgi Djambazov & Koulis Pericleous. (2017) Coupling of Acoustic Cavitation with Dem-Based Particle Solvers for Modeling De-agglomeration of Particle Clusters in Liquid Metals. Metallurgical and Materials Transactions A 48:11, pages 5616-5627.
Crossref
Mohamad Kazzaz, Carine Habchi, Kamel Ghali, Nesreen Ghaddar, Sorour Alotaibi & Walid Chakroun. (2017) Micro-particle indoor resuspension under periodic airflows: A numerical-analytical study and experimentations. Building and Environment 123, pages 299-314.
Crossref
Benjamin Figgis, Ahmed Ennaoui, Said Ahzi & Yves Rémond. (2017) Review of PV soiling particle mechanics in desert environments. Renewable and Sustainable Energy Reviews 76, pages 872-881.
Crossref
Song-Zhen Tang, Fei-Long Wang, Qinlong Ren & Ya-Ling He. (2017) Fouling characteristics analysis and morphology prediction of heat exchangers with a particulate fouling model considering deposition and removal mechanisms. Fuel 203, pages 725-738.
Crossref
J. P. Bons, R. Prenter & S. Whitaker. (2017) A Simple Physics-Based Model for Particle Rebound and Deposition in Turbomachinery. Journal of Turbomachinery 139:8.
Crossref
Alvin C.K. Lai, Yilin Tian, Judy Y.L. Tsoi & Andrea R. Ferro. (2017) Experimental study of the effect of shoes on particle resuspension from indoor flooring materials. Building and Environment 118, pages 251-258.
Crossref
Chao Liu, Zhaohui Liu, Tai Zhang, Xiaohong Huang, Junjun Guo & Chuguang Zheng. (2017) Numerical Investigation on Development of Initial Ash Deposition Layer for a High-Alkali Coal. Energy & Fuels 31:3, pages 2596-2606.
Crossref
Elizabeth Jens, Paul Tarantino, Michael Preudhomme, Robyn Hinchman, Barry Nakazono & David Vaughan. (2017) Precision cleaning samples for science analysis using a gas-based dust removal tool. Precision cleaning samples for science analysis using a gas-based dust removal tool.
Jinbo Li, Wenjing Du & Lin Cheng. (2017) Numerical simulation and experiment of gas-solid two phase flow and ash deposition on a novel heat transfer surface. Applied Thermal Engineering 113, pages 1033-1046.
Crossref
Fei-Long Wang, Ya-Ling He, Zi-Xiang Tong & Song-Zhen Tang. (2017) Real-time fouling characteristics of a typical heat exchanger used in the waste heat recovery systems. International Journal of Heat and Mass Transfer 104, pages 774-786.
Crossref
Zi-Xiang Tong, Ming-Jia Li, Ya-Ling He & Hou-Zhang Tan. (2017) Simulation of real time particle deposition and removal processes on tubes by coupled numerical method. Applied Energy 185, pages 2181-2193.
Crossref
Babak Nasr, Suresh Dhaniyala & Goodarz Ahmadi. 2017. Developments in Surface Contamination and Cleaning: Types of Contamination and Contamination Resources. Developments in Surface Contamination and Cleaning: Types of Contamination and Contamination Resources 55 84 .
Carine Habchi, Kamel Ghali & Nesreen Ghaddar. (2016) Coupling CFD and analytical modeling for investigation of monolayer particle resuspension by transient flows. Building and Environment 105, pages 1-12.
Crossref
P Tolias, S Ratynskaia, M De Angeli, G De Temmerman, D Ripamonti, G Riva, I Bykov, A Shalpegin, L Vignitchouk, F Brochard, K Bystrov, S Bardin & A Litnovsky. (2016) Dust remobilization in fusion plasmas under steady state conditions. Plasma Physics and Controlled Fusion 58:2, pages 025009.
Crossref
T. Gélain, A. Rondeau, S. Peillon, J.C. Sabroux & F. Gensdarmes. (2015) CFD modelling of the wall friction velocity field in the ITER tokamak resulting from airflow during a loss of vacuum accident—Consequences for particle resuspension. Fusion Engineering and Design 100, pages 87-99.
Crossref
Anton Manoylov, Valdis Bojarevics & Koulis Pericleous. (2015) Modeling the Break-up of Nano-particle Clusters in Aluminum- and Magnesium-Based Metal Matrix Nano-composites. Metallurgical and Materials Transactions A 46:7, pages 2893-2907.
Crossref
Yan Cui & Martin Sommerfeld. (2015) Forces on micron-sized particles randomly distributed on the surface of larger particles and possibility of detachment. International Journal of Multiphase Flow 72, pages 39-52.
Crossref
Goodarz Ahmadi. 2015. Particle Adhesion and Removal. Particle Adhesion and Removal 81 104 .
Daniel Zagnoli, Robin Prenter, Ali Ameri & Jeffrey P. Bons. (2015) Experimental and Numerical Study of Deposition in Pin Fin Arrays with Impingement Cooling Jets. Experimental and Numerical Study of Deposition in Pin Fin Arrays with Impingement Cooling Jets.
Christophe Henry & Jean-Pierre Minier. (2014) Progress in particle resuspension from rough surfaces by turbulent flows. Progress in Energy and Combustion Science 45, pages 1-53.
Crossref
Caroline Weidemann, Nicole Barkholz & Hermann Nirschl. (2014) Removal mechanisms of particulate contaminations from polymer woven filter media. Separation and Purification Technology 136, pages 168-176.
Crossref
Maurizio Troiano, Piero Salatino, Roberto Solimene & Fabio Montagnaro. (2014) Wall effects in entrained particle-laden flows: The role of particle stickiness on solid segregation and build-up of wall deposits. Powder Technology 266, pages 282-291.
Crossref
Zuqiang Qi, Wanjia Lu & Weiming Lee. (2014) A novel design of brush scrubbing in post-CMP cleaning. International Journal of Machine Tools and Manufacture 85, pages 30-35.
Crossref
Iman Goldasteh, Yilin Tian, Goodarz Ahmadi & Andrea R. Ferro. (2014) Human induced flow field and resultant particle resuspension and transport during gait cycle. Building and Environment 77, pages 101-109.
Crossref
Jing Qian, Jordan Peccia & Andrea R. Ferro. (2014) Walking-induced particle resuspension in indoor environments. Atmospheric Environment 89, pages 464-481.
Crossref
Kenji KATOH, Sanghyeon SONG, Tatsuro WAKIMOTO, Kazuhiko SOEMOTOTakamasa YAMASHITA. (2014) A study on the removal of infinitesimal particles on a wall by high-speed air jet―Measurements of adhesive force and particle removal rate―. Journal of Fluid Science and Technology 9:3, pages JFST0032-JFST0032.
Crossref
Travis W. Walker, Tienyi T. Hsu, Sean Fitzgibbon, Curtis W. Frank, David S. L. Mui, Ji Zhu, Arjun Mendiratta & Gerald G. Fuller. (2014) Enhanced particle removal using viscoelastic fluids. Journal of Rheology 58:1, pages 63-88.
Crossref
Alexander Kartushinsky, Medhat Hussainov, Efstathios E. MichaelidesYlo Rudi, Igor Shcheglov, Sergei Tisler & Igor Krupenski. (2014) Particles deposition at horizontal flat plate in turbulent particulate flow. The Canadian Journal of Chemical Engineering 92:1, pages 1-12.
Crossref
Iman Goldasteh, Goodarz Ahmadi & Andrea R. Ferro. (2013) Monte Carlo simulation of micron size spherical particle removal and resuspension from substrate under fluid flows. Journal of Aerosol Science 66, pages 62-71.
Crossref
Scott A. Bradford, Saeed Torkzaban & Alexander Shapiro. (2013) A Theoretical Analysis of Colloid Attachment and Straining in Chemically Heterogeneous Porous Media. Langmuir 29:23, pages 6944-6952.
Crossref
F. Zhang, M. Reeks & M. Kissane. (2013) Particle resuspension in turbulent boundary layers and the influence of non-Gaussian removal forces. Journal of Aerosol Science 58, pages 103-128.
Crossref
Brian P. Casaday, Ali A. Ameri & Jeffrey P. Bons. (2013) Numerical Investigation of Ash Deposition on Nozzle Guide Vane Endwalls. Journal of Engineering for Gas Turbines and Power 135:3.
Crossref
B. Barker, B. Casaday, P. Shankara, A. Ameri & J. P. Bons. (2013) Coal Ash Deposition on Nozzle Guide Vanes—Part II: Computational Modeling. Journal of Turbomachinery 135:1.
Crossref
Weiguo Ai & Thomas H. Fletcher. (2012) Computational Analysis of Conjugate Heat Transfer and Particulate Deposition on a High Pressure Turbine Vane. Journal of Turbomachinery 134:4.
Crossref
A.B. Maynard & J.S. Marshall. (2011) Particle removal from a surface by a bounded vortex flow. International Journal of Heat and Fluid Flow 32:5, pages 901-914.
Crossref
Norbert Riefler, Michael Heiland, Anja Waske, Norbert R?biger, Stefan Odenbach & Udo Fritsching. (2011) Particle deposition and detachment in capillary sphere packings. Chemical Engineering Journal 174:1, pages 93-101.
Crossref
Y. Huang & J. S. Marshall. (2011) Experiments on Bounded Vortex Flows and Related Particle Transport. Journal of Fluids Engineering 133:7.
Crossref
Libardo V. Vanegas-Useche, Magd M. Abdel-Wahab & Graham A. Parker. (2011) Dynamic finite element model of oscillatory brushes. Finite Elements in Analysis and Design 47:7, pages 771-783.
Crossref
Weiguo Ai & John M. Kuhlman. (2011) Simulation of Coal Ash Particle Deposition Experiments. Energy & Fuels 25:2, pages 708-718.
Crossref
Scott A. Bradford, Saeed Torkzaban & Andreas Wiegmann. (2011) Pore‐Scale Simulations to Determine the Applied Hydrodynamic Torque and Colloid Immobilization. Vadose Zone Journal 10:1, pages 252-261.
Crossref
M. M. Abdel Wahab, C. Wang, L. V. Vanegas Useche & G. Parker. (2010) Finite element models for brush-debris interaction in road sweeping. Acta Mechanica 215:1-4, pages 71-84.
Crossref
P Kim & J Seok. (2016) Dynamic Modelling and Simulation of a Cryogenic Carbon Dioxide Cleaning Process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 224:4, pages 213-221.
Crossref
Yoojeong Kim, Ashok Gidwani, Barbara E. Wyslouzil & Chang W. Sohn. (2010) Source term models for fine particle resuspension from indoor surfaces. Building and Environment 45:8, pages 1854-1865.
Crossref
Matt Royer, Jane H. Davidson, Lorraine F. Francis & Susan C. Mantell. (2010) Shear Induced Removal of Calcium Carbonate Scale From Polypropylene and Copper Tubes. Journal of Solar Energy Engineering 132:1.
Crossref
A. I. Kartushinsky, I. A. Krupensky, S. V. Tisler, M. T. Hussainov & I. N. Shcheglov. (2009) Deposition of solid particles in laminar boundary layer on a flat plate. High Temperature 47:6, pages 892-901.
Crossref
Yoshihiro Kubota, Joseph W. Hall & Hiroshi Higuchi. (2009) An Experimental Investigation of the Flowfield and Dust Resuspension Due to Idealized Human Walking. Journal of Fluids Engineering 131:8.
Crossref
Scott A. Bradford, Saeed Torkzaban, Feike Leij, Jiri Šimůnek & Martinus T. van Genuchten. (2009) Modeling the coupled effects of pore space geometry and velocity on colloid transport and retention. Water Resources Research 45:2.
Crossref
A.H. Ibrahim, P.F. Dunn & M.F. Qazi. (2008) Experiments and validation of a model for microparticle detachment from a surface by turbulent air flow. Journal of Aerosol Science 39:8, pages 645-656.
Crossref
Scott A. Bradford & Saeed Torkzaban. (2008) Colloid Transport and Retention in Unsaturated Porous Media: A Review of Interface‐, Collector‐, and Pore‐Scale Processes and Models. Vadose Zone Journal 7:2, pages 667-681.
Crossref
Saeed Torkzaban, Shiva S. Tazehkand, Sharon L. Walker & Scott A. Bradford. (2008) Transport and fate of bacteria in porous media: Coupled effects of chemical conditions and pore space geometry. Water Resources Research 44:4.
Crossref
Sheng-Chung Yang & Yu-Cheng Lin. (2007) Removal of SU-8 photoresist using buckling-driven delamination assisted with a carbon dioxide snow jet for microfluidics fabrication. Journal of Micromechanics and Microengineering 17:12, pages 2447-2453.
Crossref
Sheng-Chung Yang, Keng-Shiang Huang & Yu-Cheng Lin. (2007) Optimization of a pulsed carbon dioxide snow jet for cleaning CMOS image sensors by using the Taguchi method. Sensors and Actuators A: Physical 139:1-2, pages 265-271.
Crossref
Kaveh Bakhtari & Ahmed Busnaina. 2006. Nanomanufacturing Handbook. Nanomanufacturing Handbook 251 280 .
A.H. Ibrahim & P.F. Dunn. (2006) Effects of temporal flow acceleration on the detachment of microparticles from surfaces. Journal of Aerosol Science 37:10, pages 1258-1266.
Crossref
Kenneth Harstad & Josette Bellan. (2006) On possible release of microbe-containing particulates from a Mars lander spacecraft. Planetary and Space Science 54:3, pages 273-286.
Crossref
Kaveh Bakhtari, Rasim O. Guldiken, Prashanth Makaram, Ahmed A. Busnaina & Jin-Goo Park. (2006) Experimental and Numerical Investigation of Nanoparticle Removal Using Acoustic Streaming and the Effect of Time. Journal of The Electrochemical Society 153:9, pages G846.
Crossref
G. Kumar & S. Beaudoin. (2006) Undercut Removal of Micrometer-Scale Particles from Surfaces. Journal of The Electrochemical Society 153:2, pages G175.
Crossref
G.M. Burdick, N.S. Berman & S.P. Beaudoin. (2005) Hydrodynamic particle removal from surfaces. Thin Solid Films 488:1-2, pages 116-123.
Crossref
M.D. Murthy Peri & Cetin Cetinkaya. (2005) Non-contact microsphere–surface adhesion measurement via acoustic base excitations. Journal of Colloid and Interface Science 288:2, pages 432-443.
Crossref
Merysia Enggalhardjo & Ganesan Narsimhan. (2006) Adhesion of Dry Seasoning Particles onto Tortilla Chip. Journal of Food Science 70:3, pages E215-E222.
Crossref
Hui-xia JIA, Guang XI, Li-min GAO & Shu-ping WEN. (2005) Effects of Deposition Models on Deposition and Performance Deterioration in Axial Compressor Cascade. Chinese Journal of Aeronautics 18:1, pages 20-24.
Crossref
A.H Ibrahim, P.F Dunn & R.M Brach. (2003) Microparticle detachment from surfaces exposed to turbulent air flow: controlled experiments and modeling. Journal of Aerosol Science 34:6, pages 765-782.
Crossref
G. M. Burdick, N. S. Berman & S. P. Beaudoin. (2003) A Theoretical Evaluation of Hydrodynamic and Brush Contact Effects on Particle Removal during Brush Scrubbing. Journal of The Electrochemical Society 150:10, pages G658.
Crossref
G. M. Burdick, N. S. Berman & S. P. Beaudoin. (2003) A Theoretical Analysis of Brush Scrubbing Following Chemical Mechanical Polishing. Journal of The Electrochemical Society 150:2, pages G140.
Crossref
A.A. Busnaina, Hong Lin, N. Moumen, Jiang-wei Feng & J. Taylor. (2002) Particle adhesion and removal mechanisms in post-CMP cleaning processes. IEEE Transactions on Semiconductor Manufacturing 15:4, pages 374-382.
Crossref
Mehrzad Shams, Goodarz Ahmadi & Duane H Smith. (2002) Computational modeling of flow and sediment transport and deposition in meandering rivers. Advances in Water Resources 25:6, pages 689-699.
Crossref
G Ziskind & C Gutfinger. (2002) Shear and gravity effects on particle motion in turbulent boundary layers. Powder Technology 125:2-3, pages 140-148.
Crossref
A.A. Busnaina & Hong Lin. (2002) Physical removal of nano-scale defects from surfaces. Physical removal of nano-scale defects from surfaces.
Warren H. Finlay. 2001. The Mechanics of Inhaled Pharmaceutical Aerosols. The Mechanics of Inhaled Pharmaceutical Aerosols 221 276 .
Denis J Phares, Gregory T Smedley & Richard C Flagan. (2000) EFFECT OF PARTICLE SIZE AND MATERIAL PROPERTIES ON AERODYNAMIC RESUSPENSION FROM SURFACES. Journal of Aerosol Science 31:11, pages 1335-1353.
Crossref
E Hontañón, A de los Reyes & J.A Capitão. (2000) THE CÆSAR CODE FOR AEROSOL RESUSPENSION IN TURBULENT PIPE FLOWS. ASSESSMENT AGAINST THE STORM EXPERIMENTS. Journal of Aerosol Science 31:9, pages 1061-1076.
Crossref
Mehdi Soltani, Goodarz Ahmadi & Steven C. Hart. (2000) Electrostatic effects on resuspension of rigid-link fibers in turbulent flows. Colloids and Surfaces A: Physicochemical and Engineering Aspects 165:1-3, pages 189-208.
Crossref
G. Chen, S. Grano, S. Sobieraj & J. Ralston. (1999) The effect of high intensity conditioning on the flotation of a nickel ore, part 2: Mechanisms. Minerals Engineering 12:11, pages 1359-1373.
Crossref
G. Zhang, G. Burdick, F. Dai, T. Bibby & S. Beaudoin. (1998) Assessment of post-CMP cleaning mechanisms using statistically-designed experiments. Thin Solid Films 332:1-2, pages 379-384.
Crossref
John Bergendahl & Domenico Grasso. (1998) Colloid generation during batch leaching tests: mechanics of disaggregation. Colloids and Surfaces A: Physicochemical and Engineering Aspects 135:1-3, pages 193-205.
Crossref
Mehdi Soltani & Goodarz Ahmadi. (1995) Direct numerical simulation of particle entrainment in turbulent channel flow. Physics of Fluids 7:3, pages 647-657.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.