Citations (334)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (23)
R.D.K. Misra. (2023) A perspective in the understanding of strength–toughness combination during processing of engineering ferrous alloys. Materials Technology 38:1.
Read now
Read now
Youliang He, Mehdi Mehdi, Erik J. Hilinski, Tihe Zhou, Chad Cathcart, Peter Badgley & Afsaneh Edrisy. (2023) Deformation heterogeneity and its effect on the recrystallisation texture of non-oriented electrical steel. Canadian Metallurgical Quarterly 62:1, pages 49-57.
Read now
Read now
Jiaqi Duan, Didier Farrugia, Claire Davis & Zushu Li. (2022) Effect of impurities on the microstructure and mechanical properties of a low carbon steel. Ironmaking & Steelmaking 49:2, pages 140-146.
Read now
Read now
Aline Silva Magalhães, Carlos Eduardo dos Santos, Aline Oliveira Vasconcelos Ferreira, Davi Silva Alves & Dagoberto Brandão Santos. (2019) Analysis of medium manganese steel through cold-rolling and intercritical annealing or warm-rolling. Materials Science and Technology 35:17, pages 2120-2133.
Read now
Read now
Nikhil Shajan, Kanwer Singh Arora, Vikram Sharma & Mahadev Shome. (2018) Effect of upset pressure on texture evolution and its correlation to toughness in flash butt joints. Science and Technology of Welding and Joining 23:5, pages 434-440.
Read now
Read now
P. Eftekharimilani, E.M. van der Aa, M.J.M. Hermans & I.M. Richardson. (2017) Microstructural characterisation of double pulse resistance spot welded advanced high strength steel. Science and Technology of Welding and Joining 22:7, pages 545-554.
Read now
Read now
L. A. I. Kestens & H. Pirgazi. (2016) Texture formation in metal alloys with cubic crystal structures. Materials Science and Technology 32:13, pages 1303-1315.
Read now
Read now
B. Hutchinson, T. Siwecki, J. Komenda, J. Hagström, R. Lagneborg, J.-E. Hedin & M. Gladh. (2014) New vanadium-microalloyed bainitic 700 MPa strip steel product. Ironmaking & Steelmaking 41:1, pages 1-6.
Read now
Read now
C Capdevila, I Toda, F G Caballero, C Garcia-Mateo & C G de Andres. (2012) Determination of hot and cold rolling textures of steels: combined Bayesian neural network model. Materials Science and Technology 28:3, pages 321-333.
Read now
Read now
A A Shirzadi, H Abreu, C Cayron & S Ubhi. (2011) Combined effect of stress and strain on crystallographic orientation of bainite. Ironmaking & Steelmaking 38:7, pages 519-524.
Read now
Read now
R. D. K. Misra. (2010) Understanding Strength-Toughness Combination in the Processing of Engineering Steels: A Perspective. Materials and Manufacturing Processes 25:1-3, pages 60-71.
Read now
Read now
C. L. Davis, P. Mukhopadhyay, M. Strangwood, M. Potter, S. Dixon & P. F. Morris. (2008) Comparison between elastic modulus and ultrasonic velocity anisotropy with respect to rolling direction in steels. Ironmaking & Steelmaking 35:5, pages 359-366.
Read now
Read now
M. Karlsen, J. Hjelen, Ø Grong, G. Rørvik, R. Chiron, U. Schubert & E. Nilsen. (2008) SEM/EBSD based in situ studies of deformation induced phase transformations in supermartensitic stainless steels. Materials Science and Technology 24:1, pages 64-72.
Read now
Read now
C. D. Singh & S. Kumar. (2003) Texture evolution in hot band and annealed hot bands of low alloyed ferritic stainless steel. Materials Science and Technology 19:8, pages 1037-1044.
Read now
Read now
C. Mesplont & B. C. De Cooman. (2003) Effect of austenite deformation on crystallographic texture during transformations in microalloyed bainitic steel. Materials Science and Technology 19:7, pages 875-886.
Read now
Read now
R. D. K. Misra & J. P. Anderson. (2002) Evolution of textures in hot rolled Nb - Ti and V - Nb microalloyed steels. Materials Science and Technology 18:12, pages 1513-1516.
Read now
Read now
R.
K. Ray & A. Haldar. (2002) TEXTURE DEVELOPMENT IN EXTRA LOW CARBON (ELC) AND INTERSTITIAL FREE (IF) STEELS DURING WARM ROLLING. Materials and Manufacturing Processes 17:5, pages 715-729.
Read now
Read now
R.D.K. Misra, G.C. Weatherly, J.E. Hartmann & A.J. Boucek. (2001) Ultrahigh strength hot rolled microalloyed steels: microstructural aspects of development. Materials Science and Technology 17:9, pages 1119-1129.
Read now
Read now
R.D.K. Misra & J.P. Anderson. (2001) Transformation textures in new ultrahigh strength hot rolled microalloyed steel. Materials Science and Technology 17:1, pages 116-118.
Read now
Read now
A. Girgensohn & A.R. Büchner. (2000) Twin roll strip casting of low carbon steels. Ironmaking & Steelmaking 27:4, pages 317-323.
Read now
Read now
D. Raabe. (1995) Experimental investigation and simulation of crystallographic rolling textures of Fe–11Cr steel. Materials Science and Technology 11:10, pages 985-993.
Read now
Read now
D. Raabe. (1995) Investigation of contribution of {123} slip planes to development of rolling textures in bee metals by use of Taylor models. Materials Science and Technology 11:5, pages 455-460.
Read now
Read now
R. K. Ray, J. J. Jonas & R. E. Hook. (1994) Cold rolling and annealing textures in low carbon and extra low carbon steels. International Materials Reviews 39:4, pages 129-172.
Read now
Read now
Articles from other publishers (311)
Reza Khatib Zadeh Davani, Enyinnaya George Ohaeri, Sandeep Yadav, Jerzy A. Szpunar, Jing Su, Michael Gaudet, Muhammad Rashid & Muhammad Arafin. (2024) Crystallographic texture and the mechanical properties of API 5L X70 pipeline steel designated for an arctic environment. Materials Science and Engineering: A 889, pages 145849.
Crossref
Crossref
Alok Kumar Singh, Basudev Bhattacharya & Somjeet Biswas. (2024) High strength, ductility and sheet formability by normalizing and quenching of low carbon microalloyed dual-phase steel. Materials Science and Engineering: A 890, pages 145848.
Crossref
Crossref
Shuwen Wang, Shujun Chen, Tao Yuan, Xiaoqing Jiang, Pengjing Zhao & Wutong Ding. (2024) Crystallographic characteristics and mechanical behavior of laser welded joints of hot roll bending parts. Materials Characterization 207, pages 113466.
Crossref
Crossref
Mohamed Gouné, Thierry Iung & Jean‐Hubert SchmittHélène RÉGLÉ & Brigitte BACROIX. 2023. New Advanced High Strength Steels. New Advanced High Strength Steels
43
69
.
A.K. Chandan, G. Mishra, K. Kishore, G.K. Bansal, B.K. Sahoo, P.S.M. Jena, S. Kumar, S.K. Rai, R. Saha, S. Kundu & J. Chakraborty. (2023) Evading the strength-ductility compromise in medium manganese steel by a novel low temperature warm rolling treatment. Materials Characterization 206, pages 113445.
Crossref
Crossref
Abhisek Mandal, Rakesh Kumar Barik, Ankita Bhattacharya, Debalay Chakrabarti & Claire Davis. (2023) The Correlation Between Bending, Tensile and Charpy Impact Properties of Ultra-high-Strength Strip Steels. Metallurgical and Materials Transactions A 54:10, pages 3820-3843.
Crossref
Crossref
Jong-Wook Park, Hee-Young Jung, Wonki Jeong, Se-Eun Shin, Hidetoshi Fujii, Hyun-Joon Kim & Seung-Joon Lee. (2023) Microstructure, mechanical properties, and wear properties of friction-stir processed S45C steel. Tribology International 186, pages 108646.
Crossref
Crossref
Tian-Wei Liu & Xiao-Lei Wu. (2023) Martensitic transformation pathways and crystallographic orientation relationships in steel. Journal of Materials Science & Technology.
Crossref
Crossref
Chao Fang, Chengning Li, Xinjie Di, Wen Fu, Wenyi Hu, Xiang Chen & Ziwei Ma. (2023) Evolution of Microstructure and Crystallographic Texture During Welding for 1.5 GPa Ultra-high Strength Steel Toughened by an Elongated Grain Structure With Intensive Texture. Metallurgical and Materials Transactions A 54:8, pages 3055-3068.
Crossref
Crossref
Arnab Sarkar, Pranabananda Modak, Abhisek Mandal, Debalay Chakrabarti & Anish Karmakar. (2023) Correlation Between Microstructure and Tensile Properties of Low-Carbon Steel Processed via Different Thermomechanical Routes. Journal of Materials Engineering and Performance.
Crossref
Crossref
Kopparthi Ravikiran, Leijun Li, Greg Lehnhoff, Nitin Kumar Sharma, Rangasayee Kannan, Nitin Saini, Suvan Dev Choudhury & Zhe Lyu. (2023) Microstructure and crystallographic texture of high frequency electric resistance welded X65 pipeline steel. Materials Chemistry and Physics 302, pages 127758.
Crossref
Crossref
Penghui Bai, Chunlei Shang, Hong-Hui Wu, Guoqiang Ma, Shuize Wang, Guilin Wu, Junheng Gao, Yimian Chen, Jinyong Zhang, Jiaming Zhu & Xinping Mao. (2023) A review on the advance of low-temperature toughness in pipeline steels. Journal of Materials Research and Technology 25, pages 6949-6964.
Crossref
Crossref
Xiaosheng Zhou, Yaran Zhang, Yanmo Li, Meini Yuan, Guodong Li, ZhenYa Chen & Huang Zhang. (2023) Dependency of Portevin-LeChatelier Effect and Microstructure Characteristics of 9Cr ODS Steels on Strain Rates Upon Hot Deformation. Metals and Materials International.
Crossref
Crossref
D. Bhuyan, G.V.S. Sastry, S. Patra, S.K. Pradhan & R. Manna. (2023) Effect of austempering time on bainite plate thickness and variant selection in a high carbon low alloy steel. Materials Characterization 200, pages 112923.
Crossref
Crossref
Ipsa Tripathy & Shiv Brat Singh. (2023) Effect of Austenitization Treatment on Texture Inheritance Characteristics of Near Eutectoid Pearlitic Steel. Transactions of the Indian Institute of Metals.
Crossref
Crossref
Yizhou Du, Ronald O’Malley & Mario F. Buchely. (2023) Review of Magnetic Properties and Texture Evolution in Non-Oriented Electrical Steels. Applied Sciences 13:10, pages 6097.
Crossref
Crossref
Haijun Pan, Wei Chaofan, Hongmin Zhang, Xinyu Li, Lin Liu, Jing Li & Zhiqiang Wu. (2023) Strain rate sensitivity of low-temperature superplastic cold-rolled medium Mn steel with ultrafine equiaxed dual-phase microstructure. Materials Science and Engineering: A 873, pages 145025.
Crossref
Crossref
Sk Md Hasan, Abhijit Ghosh, Debalay Chakrabarti & Shiv Brat Singh. (2023) Deformation-induced martensite transformation and variant selection in AISI 316L austenitic stainless steel during uniaxial tensile deformation. Materials Science and Engineering: A 872, pages 144930.
Crossref
Crossref
S. Kumar, S. Manda, S.K. Giri, S. Kundu, S. Karagadde, R. Balamuralikrishnan, S.V.S.N. Murty, C.R. Anoop & I. Samajdar. (2023) Relating Martensite variant selection with prior austenite microstructure: A coupled study of experiments and pixel-by-pixel reconstruction. Materials Characterization 199, pages 112822.
Crossref
Crossref
Rameez R. Tamboli, Benjamin Guennec, Hiroshi Fujiwara, Kei Ameyama, Basudev Bhattacharya & Suhash Ranjan Dey. (2022) Comprehensive Observations and Interpretations in Al-Rich Interstitial-Free High-Strength Steel via Process-Induced Structure Evolution. Journal of Materials Engineering and Performance 32:10, pages 4415-4426.
Crossref
Crossref
Pedro H. Pinheiro, Mohammad Masoumi, Luís Flávio G. Herculano, João Victor B. Xavier, Samille Kricia B. de Lima, Eden S. Silva, Gedeon S. Reis, Samuel F. Rodrigues & Hamilton F. Gomes de Abreu. (2023) Microstructural and Texture Evolution of Pearlite-Drawn Wires for Flexible Marine Pipelines: Investigating the Effect of Heat Treatments on Mechanical Properties. Metals 13:4, pages 805.
Crossref
Crossref
R. Hamshini, B. Tripathy, S. Paul, S. Narayanswamy, R. Saha & P. P. Bhattacharjee. (2023) Annealing-Mediated Microduplex Structure and Texture Evolution in Severely Cold-Rolled Nanolamellar Pearlite: A Perspective on the Effect of Starting Inter-lamellar Spacing. Metallurgical and Materials Transactions A 54:4, pages 1199-1212.
Crossref
Crossref
R.H. Duan, Y.Q. Wang, Z.A. Luo, G.D. Wang & G.M. Xie. (2023) Hydrogen embrittlement behavior in the nugget zone of friction stir welded X100 pipeline steel. International Journal of Hydrogen Energy 48:22, pages 8296-8309.
Crossref
Crossref
Seung-Hyeok Shin, Dong-Kyu Oh, Young-Chul Yoon & Byoungchul Hwang. (2022) Correlation of Microstructure with Anisotropy of Low‐Temperature Toughness in Two API X70 Pipeline Steels. steel research international 94:2.
Crossref
Crossref
Hongbin Li, Xiaoping Zheng, Lifeng Fan, Haiwei Xu, Yaqiang Tian, Xin Dai & Liansheng Chen. (2022) Ultrafine Grain Ferrite Transformed from Fine Austenite Grains Produced by Dynamic Reversal Transformation. Materials 15:24, pages 8727.
Crossref
Crossref
Nathan E. Peterson, Chris M. Fancher, Matthias Frontzek, Jeffrey Bunn, Andrew Payzant, Ke An & Sean Agnew. (2022)
Quantitative texture analysis at the WAND
2
and HIDRA diffractometers
. Journal of Applied Crystallography 55:6, pages 1432-1445.
Crossref
Crossref
Rameez R. Tamboli, Benjamin Guennec, Hiroshi Fujiwara, Kei Ameyama, Basudev Bhattacharya & Suhash Ranjan Dey. (2022) Fostering deep drawability through recrystallization texture strengthening in aluminum-rich interstitial free steel. Materials Characterization 193, pages 112264.
Crossref
Crossref
Rameez R. Tamboli, Srinivas Dudala, Dustin Andersen, Nathalie Valle, Santhana Eswara, Rajesh Korla, Hiroshi Fujiwara, Benjamin Guennec, Kei Ameyama, Basudev Bhattacharya & Suhash Ranjan Dey. (2022) Quantitative prediction of Al and learning grain boundary character in Al-rich interstitial free steel. Scripta Materialia 219, pages 114858.
Crossref
Crossref
Ariane Neves de Moura, Cláudio Moreira de Alcântara, Estéfano Aparecido Vieira, Daniella Gomes Rodrigues, Wilian da Silva Labiapari, Marco Antônio da Cunha, Tarcísio Reis de Oliveira & Marcos Tadeu D'Azeredo Orlando. (2022) Microstructure and crystallographic texture of martensitic stainless steels after cold rolling and subsequent recrystallization. Materials Characterization 192, pages 112190.
Crossref
Crossref
Sandeep Yadav, Tonye Alaso Jack, Reza Khatib Zadeh Davani, Enyinnaya Ohaeri & Jerzy Szpunar. (2022) Effect of post-processing heat treatment on hydrogen embrittlement susceptibility of API 5L X70 pipeline steel. International Journal of Pressure Vessels and Piping 199, pages 104762.
Crossref
Crossref
Chetan Kadgaye, Santosh Godase, Arnab Karani, Kaustav Barat, Debalay Chakrabarti & Anish Karmakar. (2022) Correlating in-plane strength anisotropy with its microstructural counterpart for a hot rolled line pipe steel. International Journal of Pressure Vessels and Piping 199, pages 104753.
Crossref
Crossref
Hongtao Wang, Yong Tian, Qibin Ye, Qinghai Wang, Zhaodong Wang & Guodong Wang. (2022) Effect of Delamination on Ductile Fracture during the Impact Test in Ultra-Heavy Steel. Journal of Materials Engineering and Performance 31:10, pages 7843-7855.
Crossref
Crossref
Dingbo Sun, Shuhai Huang, Chongmu Chen, Hui Wang, Xuguang An, Qiangguo Li & Xuefei Huang. (2022) Enhancement of the Mechanical Properties of a V–Ti–N Microalloyed Steel Treated by a Novel Precipitation-Quenching & Partitioning Process. Metallurgical and Materials Transactions A 53:10, pages 3696-3712.
Crossref
Crossref
Cheng-Yao Huang, Shao-Lun Lu & Hung-Wei Yen. (2022) Digital Reconstruction of Engineered Austenite: Revisiting Effects of Grain Size and Ausforming on Variant Selection of Martensite. Metals 12:9, pages 1511.
Crossref
Crossref
S.H. Mousavi Anijdan, H.R. Koohdar, M. Nili-Ahmadabadi, H.R. Jafarian & Terence G. Langdon. (2022) Evaluation of texture weakening and microstructural evolution in an Fe–10Ni–7Mn martensitic steel severely deformed by six turns of high-pressure torsion. Materials Science and Engineering: A 851, pages 143660.
Crossref
Crossref
Rishabh Bharadwaj, Aditya Sarkar & Bhushan Rakshe. (2022) Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb–Ti Microalloyed Low Carbon HSLA Steel. Metallography, Microstructure, and Analysis 11:4, pages 661-672.
Crossref
Crossref
S. Samuha, Y. Templeman, S. Haroush, G. M. Guttmann, M. Pinkas & L. Meshi. (2022) A crystallographic study of the deformation mechanisms during small punch testing of 14wt%Cr oxide dispersion steel. Journal of Materials Science 57:25, pages 11969-11982.
Crossref
Crossref
Soroush Bakhshi & Alireza Mirak. (2022) Textural development, martensite lath formation and mechanical properties variation of a super strength AISI4340 steel due to austenitization and tempering temperature changes. Materials Characterization 188, pages 111923.
Crossref
Crossref
Sushil K. Giri, Saurabh Kundu, Aditya Prakash, S. Cicale, L. Albini & Indradev Samajdar. (2022) Defining the Role of Hot Band Annealing in High-Permeability Grain-Oriented (GO) Electrical Steel. Metallurgical and Materials Transactions A 53:5, pages 1873-1888.
Crossref
Crossref
Ahmad Mirzaei, Razieh Ghaderi, Peter D. Hodgson, Xiang Ma, Gregory S. Rohrer & Hossein Beladi. (2022) The influence of parent austenite characteristics on the intervariant boundary network in a lath martensitic steel. Journal of Materials Science 57:19, pages 8904-8923.
Crossref
Crossref
Alexis Guzmán & Alberto Monsalve. (2022) Effect of Bainitic Isothermal Treatment on the Microstructure and Mechanical Properties of a CMnSiAl TRIP Steel. Metals 12:4, pages 655.
Crossref
Crossref
Ping Yang, Dandan Ma, Xinfu Gu & Fenge Cui. (2022) On the transformation textures influenced by deformation in electrical steels, high manganese steels and pure titanium sheets. Frontiers of Materials Science 16:1.
Crossref
Crossref
Hao Chen, Jinqiang Hou, Linlin Zhao, Qing Zhang, Yizhe Zhao & Zejun Chen. (2022) Microstructure evolution and mechanical properties during industrial intercritical quenching and partitioning (IQ&P) processing of a low alloy steel. Materials Research Express 9:2, pages 026519.
Crossref
Crossref
Kaushal Kishore, A.K. Chandan, B.K. Sahoo & L.K. Meena. (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics 277, pages 125522.
Crossref
Crossref
Liang Wang, Peishan Zhou, Yiwen Hu & Bin Wang. (2022) Effect of microstructure and texture on the mechanical properties in high strength pipeline bend. International Journal of Pressure Vessels and Piping 195, pages 104604.
Crossref
Crossref
D. A. Krivenok, S. V. Danilov, N. N. Nikul’chenkov & M. L. Lobanov. Crystallographic texture simulation of TMCP. Crystallographic texture simulation of TMCP.
Dan-dan Ma, Ping Yang, Xin-fu Gu & Feng-e Cui. (2022) Influences of initial microstructures on martensitic transformation and textures during cold rolling and tensile mechanical properties in high manganese TRIP steel. Materials Science and Engineering: A 829, pages 142147.
Crossref
Crossref
Eleanor Saliba & Maurice Grech. (2022) The effect of heat treatment parameters on the microstructure and torque response of a 13 wt% Cr steel. Journal of Magnetism and Magnetic Materials 541, pages 168543.
Crossref
Crossref
Vinothkumar Govindaraj, Ehsan Farabi, Sitarama Kada, Peter D. Hodgson, Rajkumar P Singh, Gregory S. Rohrer & Hossein Beladi. (2021) Effect of manganese on the grain boundary network of lath martensite in precipitation hardenable stainless steels. Journal of Alloys and Compounds 886, pages 161333.
Crossref
Crossref
B. Syed, P Maurya, S. Lenka, G. Padmanabham & SM Shariff. (2021) Analysis of high strength composite structure developed for low-carbon-low-manganese steel sheet by laser surface treatment. Optics & Laser Technology 143, pages 107285.
Crossref
Crossref
Sruthi Mohan, Alphy George, R. Vijay, C. David & G. Amarendra. (2021) Interfacial strain relief by periodic dislocation doublets arising from rotationally related orientation relationships of Y4Zr3O12 dispersions in ferrite matrix. Materials Science and Engineering: A 828, pages 142047.
Crossref
Crossref
G.A.W. Sweet, I.W. Donaldson, C.T. Schade, M.Y. Amegadzie & D.P. Bishop. (2021) Laser free-form fabrication of dual phase DP600 steel using water atomized feedstock powder. Additive Manufacturing 47, pages 102357.
Crossref
Crossref
Toshiro Tomida, Sven C. Vogel, Yusuke Onuki & Shigeo Sato. (2021) Texture Memory in Hexagonal Metals and Its Mechanism. Metals 11:10, pages 1653.
Crossref
Crossref
Hongtao Wang, Yong Tian, Qibin Ye, Liye Kan, Zhaodong Wang & Guodong Wang. (2021) Mechanism for Refining Grains and Effect of Microstructural Characteristics on Low‐Temperature Toughness for Industrial EH460 Heavy‐Gauge Steel. steel research international 92:8.
Crossref
Crossref
Jun Chen, Jia-kuan Ren & Zhen-yu Liu. (2021) Deformation microstructures as well as strengthening and toughening mechanisms of low-density high Mn steels for cryogenic applications. Journal of Materials Research and Technology 13, pages 947-961.
Crossref
Crossref
L. I. Éfron, E. A. Volkova, D. V. Kudashov, D. A. Ringinen, O. A. Bagmet & K. S. Smetanin. (2021) Formation of Structure and Properties of Low-Carbon Pipe Steel with Ultralow Manganese Content during Thermomechanical Treatment. Metallurgist 65:3-4, pages 277-293.
Crossref
Crossref
Edgar Gomes de Araujo, Hadi Pirgazi, Mehdi Sanjari, Mohsen Mohammadi & Leo A. I. Kestens. (2021) Automated reconstruction of parent austenite phase based on the optimum orientation relationship. Journal of Applied Crystallography 54:2, pages 569-579.
Crossref
Crossref
Toshiro Tomida, Elena Vakhitova, Denis Sornin, Jonathan Wright, Manuel François, Yusuke Onuki, Takashi Hirano, Akinori Hoshikawa, Toru Ishigaki & Shigeo Sato. (2021) Texture Memory in Si-Mn and ODS Steels Observed In Situ by Pulsed Neutron and Synchrotron X-Ray Diffractions and Prediction by Double Kurdjumov-Sachs Relation: A Concept for Intense Variant Selection. Metallurgical and Materials Transactions A 52:4, pages 1368-1381.
Crossref
Crossref
Mohammad Rezayat, Mohammad Sadegh Mohebbi, Mohammad Habibi Parsa, Stefan Nagy & Martin Nosko. (2020) Microstructure Evolution during Controlled Rolling of an Nb–Ti Microalloyed Steel. steel research international 92:4.
Crossref
Crossref
A Kaijalainen, V Javaheri, O Nousiainen, J Tulonen, P Steen & J Kömi. (2021) Texture Evolution During Cold Forming of Rectangular Hollow Section. IOP Conference Series: Materials Science and Engineering 1121:1, pages 012005.
Crossref
Crossref
Peijun Hou, Yuan Li, Dongchul Chae, Yang Ren, Ke An & Hahn Choo. (2021) Lean duplex TRIP steel: Role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning. Materialia 15, pages 100952.
Crossref
Crossref
Cheng-yang Hu, Hang-yu Dong, Kai-ming Wu, R. D. K. Misra, Lei Zhong, Xing Jin & Qiang Li. (2021) Effect of Zr-deoxidation on microstructure and mechanical behavior of microalloyed heavy plates with low impurity content. Journal of Iron and Steel Research International 28:2, pages 190-200.
Crossref
Crossref
Ariane Neves de Moura, Cláudio Moreira de Alcântara, Tarcísio Reis de Oliveira, Marco Antônio da Cunha & Marcelo Lucas Pereira Machado. (2021) Effect of cold rolling reduction on texture, recrystallization and mechanical properties of UNS S32304 Lean Duplex stainless steel. Materials Science and Engineering: A 802, pages 140577.
Crossref
Crossref
Divija Pandel, Malay Kumar Banerjee & Amit Kumar Singh. (2020) A Review of the Mg2(Si,Sn) Alloy System as Emerging Thermoelectric Material: Experimental and Modeling Aspects. Journal of Electronic Materials 50:1, pages 25-51.
Crossref
Crossref
Sourav Das, Anish Karmakar & Shiv Brat Singh. 2021. High-Performance Ferrous Alloys. High-Performance Ferrous Alloys
83
112
.
J. I. Omale, E. G. Ohaeri, K. M. Mostafijur, J. A. Szpunar, F. Fateh & M. Arafin. (2020) Through-Thickness Inhomogeneity of Texture, Microstructure, and Mechanical Properties After Rough and Finish Rolling Treatments in Hot-Rolled API 5L X70 Pipeline Steel. Journal of Materials Engineering and Performance 29:12, pages 8130-8144.
Crossref
Crossref
Sk. Jabed Miadad, T. Venugopalan, Nimai Halder & B. Ravi Kumar. (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance 29:11, pages 7598-7606.
Crossref
Crossref
E.I. Hernandez-Duran, T. Ros-Yanez, F.M. Castro-Cerda & R.H. Petrov. (2020) The influence of the heating rate on the microstructure and mechanical properties of a peak annealed quenched and partitioned steel. Materials Science and Engineering: A 797, pages 140061.
Crossref
Crossref
Sushil K. Giri, A. Durgaprasad, H. Mehtani, S. Kundu & I. Samajdar. (2020) Origin of Goss (110)〈001〉 Grains in Hot-Worked Grain-Oriented Steel. Metallurgical and Materials Transactions A 51:10, pages 5268-5284.
Crossref
Crossref
Y. Tian, H.T. Wang, Q.B. Ye, Q.H. Wang, Z.D. Wang & G.D. Wang. (2020) Effect of rolling reduction below γ non-recrystallization temperature on pancaked γ, microstructure, texture and low-temperature toughness for hot rolled steel. Materials Science and Engineering: A 794, pages 139640.
Crossref
Crossref
O. Heidary, O. Mirzaee, A. Honarbakhsh Raouf & E. Borhani. (2020) Texture development during austempering process of an AISI 4130 steel. Materials Science and Engineering: A 793, pages 139751.
Crossref
Crossref
Wen Wang, Shengyi Zhang, Ke Qiao, Kuaishe Wang, Pai Peng, Shengnan Yuan, Shanyong Chen, Ting Zhang, Qiang Wang, Tie Liu & Qi Yang. (2020) Microstructure and mechanical properties of friction stir welded joint of TRIP steel. Journal of Manufacturing Processes 56, pages 623-634.
Crossref
Crossref
Shih-Che Chen, Cheng-Yao Huang, Yuan-Tsung Wang, Ching-Yuan Huang & Hung-Wei Yen. (2020) Role of the crystallographic texture in anisotropic mechanical properties of a newly-developed hot-rolled TRIP steel. Materials Science and Engineering: A 790, pages 139683.
Crossref
Crossref
Subhajit Mitra, Kanwer Singh Arora, Basudev Bhattacharya & Shiv Brat Singh. (2020) Effect of Welding Speed on Texture in Laser-Welded Dual-Phase Steel. Metallurgical and Materials Transactions A 51:6, pages 2915-2926.
Crossref
Crossref
Ariane Neves Moura, Jetson Lemos Ferreira, João Batista Ribeiro Martins, Marden Valente Souza, Nicolau Apoena Castro & Marcos Tadeu D'Azeredo Orlando. (2020) Microstructure, Crystallographic Texture, and Stretch‐Flangeability of Hot‐Rolled Multiphase Steel. steel research international 91:6.
Crossref
Crossref
Dan-dan Ma, Ping Yang, Xin-Fu Gu, Yusuke Onuki & Shigeo Sato. (2020) In-situ neutron diffraction investigation on the martensite transformation, texture evolution and martensite reversion in high manganese TRIP steel. Materials Characterization 163, pages 110244.
Crossref
Crossref
Sk. Md. Hasan, Abhijit Ghosh, Debalay Chakrabarti & Shiv Brat Singh. (2020) Orientation Dependence of Deformation-Induced Martensite Transformation During Uniaxial Tensile Deformation of Carbide-Free Bainitic Steel. Metallurgical and Materials Transactions A 51:5, pages 2053-2063.
Crossref
Crossref
Ayda Shahriari, Ladan Khaksar, Ali Nasiri, Amir Hadadzadeh, Babak Shalchi Amirkhiz & Mohsen Mohammadi. (2020) Microstructure and corrosion behavior of a novel additively manufactured maraging stainless steel. Electrochimica Acta 339, pages 135925.
Crossref
Crossref
Ya. I. Matvienko, S. S. Polishchuk, A. D. Rud, T. M. Mika, A. I. Ustinov & S. A. Demchenkov. (2020) Effect of Non-Equilibrium Conditions of Reactions Between Cu and Al in the Solid-State on Al$_4$Cu$_9$ Phase Formation in Cu–Al System. METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 42:2, pages 143-157.
Crossref
Crossref
Alireza Vahedi Nemani, Mahya Ghaffari & Ali Nasiri. (2020) Comparison of microstructural characteristics and mechanical properties of shipbuilding steel plates fabricated by conventional rolling versus wire arc additive manufacturing. Additive Manufacturing 32, pages 101086.
Crossref
Crossref
Biraj Kumar Sahoo, Anjana Deva, Pratiksha Pandey, Lalit Kumar Meena, Sandip Ghosh Chowdhury & Bimal Kumar Jha. (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance 29:3, pages 1901-1908.
Crossref
Crossref
Ning Kong, Jie Zhang, Hongbo Li, Boyu Wei & David R. G. Mitchell. (2020) The Influence of a Novel Inorganic-Polymer Lubricant on the Microstructure of Interstitial-Free Steel during Ferrite Rolling. Metals 10:2, pages 178.
Crossref
Crossref
S. V. Danilov, N. V. Urtsev, K. B. Maslennikov, V. N. Urtsev & M. L. Lobanov. Influence of structural and textural states of low-carbon steels on the cracking resistance of tube products. Influence of structural and textural states of low-carbon steels on the cracking resistance of tube products.
P. L. Reznik, S. V. Danilov, A. A. Redikultsev & M. L. Lobanov. Formation algorithm of crystallographic texture in low-carbon steel in TMCP. Formation algorithm of crystallographic texture in low-carbon steel in TMCP.
B. Zhang, L.X. Du, Y. Dong, D.X. Han, H.Y. Wu, F.H. Lu & R.D.K. Misra. (2020) Structure-property relationship in novel low carbon hot-rolled TRIP steels via thermo-mechanical controlled processing and coiling. Materials Science and Engineering: A 771, pages 138643.
Crossref
Crossref
Tu Le Manh, José Alberto Pérez Benitez, José Hiram Espina Hernández & José Manuel Hallen López. 2020. Barkhausen Noise for Non-Destructive Testing and Materials Characterization in Low Carbon Steels. Barkhausen Noise for Non-Destructive Testing and Materials Characterization in Low Carbon Steels
95
114
.
Mohammad R. Kamali, L. Pentti Karjalainen, Ali R. Mashregi, Saeed Hasani, Vahid Javaheri & Jukka Kömi. (2019) Reobservations of ferrite recrystallization in a cold-rolled ordered Fe–50Co–10V alloy using the EBSD method. Materials Characterization 158, pages 109962.
Crossref
Crossref
Mehdi Mehdi, Youliang He, Erik J. Hilinski, Narayan C. Kar & Afsaneh Edrisy. (2019) Non-oriented electrical steel with core losses comparable to grain-oriented electrical steel. Journal of Magnetism and Magnetic Materials 491, pages 165597.
Crossref
Crossref
Arnab Sarkar, Souriddha Sanyal, Tapas K. Bandyopadhyay & Sumantra Mandal. (2019) Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel. Materials Science and Engineering: A 767, pages 138402.
Crossref
Crossref
Xin-jun Shen, De-zhi Li, Jun Chen, Shuai Tang & Guo-dong Wang. (2019) The Effect of Initial Microstructure on Microstructure Evolution and Mechanical Properties of Intercritically Rolled Low‐Carbon Microalloyed Steel Plates. steel research international 90:11.
Crossref
Crossref
N. Dudova, R. Mishnev & R. Kaibyshev. (2019) Creep behavior of a 10%Cr heat-resistant martensitic steel with low nitrogen and high boron contents at 650 °C. Materials Science and Engineering: A 766, pages 138353.
Crossref
Crossref
Mohammad Moallemi, Abbas Zarei-Hanzaki, Sung-Joon Kim & Hossein Alimadadi. (2019) On the microstructural-textural characterization and deformation analysis of a nano/ultrafine grained Fe-20Cr-8Mn-0.3N duplex alloy with superior mechanical properties. Materials Characterization 156, pages 109878.
Crossref
Crossref
Binbin YueFang HongNaohisa HiraoRoman Vasin, Hans-Rudolf WenkBin ChenHo-Kwang Mao. (2019) A simple variant selection in stress-driven martensitic transformation. Proceedings of the National Academy of Sciences 116:30, pages 14905-14909.
Crossref
Crossref
Xiaoqing Jiang, Shujun Chen, Jinlong Gong & Zhenyang Lu. (2019) Effect of Microstructure and Texture on Mechanical Properties of Resistance Spot Welded High Strength Steel 22MnB5 and 5A06 Aluminium Alloy. Metals 9:6, pages 685.
Crossref
Crossref
S Takajo, S C Vogel & C N Tomé. (2019) Viscoplastic self-consistent polycrystal modeling of texture evolution of ultra-low carbon steel during cold rolling. Modelling and Simulation in Materials Science and Engineering 27:4, pages 045003.
Crossref
Crossref
Jie Chen, Changsheng Li, Jinyi Ren, Xingyang Tu & Liqing Chen. (2019) Strength and toughness of Fe-1.2Mn-0.3Cr-1.4Ni-0.4Mo-C tempered steel plate in three cooling processes. Materials Science and Engineering: A 754, pages 178-189.
Crossref
Crossref
Eda Aydogan, Connor Rietema, Ursula Carvajal-Nunez, Sven Vogel, Meimei Li & Stuart Maloy. (2019) Effect of High-Density Nanoparticles on Recrystallization and Texture Evolution in Ferritic Alloys. Crystals 9:3, pages 172.
Crossref
Crossref
Zhijun Gao, Jingyuan Li & Yide Wang. (2019) Analysis of the Deep Drawing Behavior of 2507 Super Duplex Stainless Steel Based on Texture and Microstructure Evolutions. ISIJ International 59:3, pages 531-540.
Crossref
Crossref
S. Das Bakshi, T. Dhande, N. Javed, K.N. Sasidhar, V. Sharma, M. Mukherjee, B. Ghosh & V.V. Mahashabde. (2019) Effect of hot deformation and crystallographic texture on toughness anisotropy and fracture behavior of Nb+V microalloyed API X70 steel. International Journal of Pressure Vessels and Piping 171, pages 162-172.
Crossref
Crossref
Graziele Gianini Braga Maria, Carolina Arriel Dias Pedroso, Daniella Gomes Rodrigues & Dagoberto Brandão Santos. (2018) Strain‐Induced Martensite and Reverse Transformation in 2304 Lean Duplex Stainless Steel and its Influence on Mechanical Behavior. steel research international 90:3.
Crossref
Crossref
Sudipta Patra, Abhisek Mandal, Madhumanti Mandal, Vinod Kumar, Rahul Mitra & Debalay Chakrabarti. (2018) Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel. Metallurgical and Materials Transactions A 50:2, pages 947-965.
Crossref
Crossref
Arka Mandal, Badirujjaman Syed, Khilesh Kr. Bhandari, Basudev Bhattacharya, Arghya Deb, Shiv Brat Singh & Debalay Chakrabarti. (2019) Cold-bending of linepipe steel plate to pipe, detrimental or beneficial?. Materials Science and Engineering: A 746, pages 58-72.
Crossref
Crossref
Hyung-Won Park, Kei Shimojima, Sumio Sugiyama & Jun Yanagimoto. (2019) Formability of Bimodal Steel Strips Subjected to Heavy-reduction Controlled-rolling Process大圧下制御圧延により創製されたバイモーダル薄鋼板の成形性. Tetsu-to-Hagane 105:2, pages 190-196.
Crossref
Crossref
Lifeng Fan, Sai Li, Lijun Xiao, Guangbo Tang, Liang Bai & Jiao Huang. (2019) Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250. Metallurgical Research & Technology 116:6, pages 632.
Crossref
Crossref
Somjeet Biswas, Santigopal Samanta, Alok K. Singh, Basudev Bhattacharya & Shiv B. Singh. 2019. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Xiao-fei Zheng, Lu-hai Liao, Yong-lin Kang, Wei Liu & Quan-quan Qiu. (2018) The Effect of Chemical Composition and Processing Technology on the Microstructure, Texture and Earing Behavior of DR Tinplate. Journal of Materials Engineering and Performance 28:1, pages 485-497.
Crossref
Crossref
Alvaro Salinas, Alfredo Artigas, Juan Perez-Ipiña, Felipe Castro-Cerda, Nelson Garza-Montes-de-Oca, Rafael Colás, Roumen Petrov & Alberto Monsalve. (2018) Effects of Heat Treatment on Morphology, Texture, and Mechanical Properties of a MnSiAl Multiphase Steel with TRIP Behavior. Metals 8:12, pages 1021.
Crossref
Crossref
G. Mandal, S. K. Ghosh, D. Chakrabarti & S. Chatterjee. (2018) Correlation Between Structure and Properties of Low-Carbon Cu-Ni-Mo-Ti-Nb Ultrahigh-Strength Steel. Journal of Materials Engineering and Performance 27:12, pages 6516-6528.
Crossref
Crossref
Abhisek Mandal, Anish Karmakar, Debalay Chakrabarti & Claire Davis. (2018) Effect of Alloying and Coiling Temperature on the Microstructure and Bending Performance of Ultra-High-Strength Strip Steel. Metallurgical and Materials Transactions A 49:12, pages 6359-6374.
Crossref
Crossref
G. Sahoo, C.D. Singh, M. Deepa, S.K. Dhua & A. Saxena. (2018) Recrystallization behaviour and texture of non-oriented electrical steels. Materials Science and Engineering: A 734, pages 229-243.
Crossref
Crossref
J.Y. Wu, B. Wang, B.X. Wang, R.D.K. Misra & Z.D. Wang. (2018) Toughness and ductility improvement of heavy EH47 plate with grain refinement through inter-pass cooling. Materials Science and Engineering: A 733, pages 117-127.
Crossref
Crossref
A. Kaijalainen, V. Javaheri, D. Lindell & D.A. Porter. (2018) Development of crystallographic texture under plane and shear strain in ultrahigh-strength strip steels. IOP Conference Series: Materials Science and Engineering 375, pages 012026.
Crossref
Crossref
Pranabananda Modak, Sudipta Patra, Rahul Mitra & Debalay Chakrabarti. (2018) Effect of Starting As-cast Structure on the Microstructure–Texture Evolution During Subsequent Processing and Finally Ridging Behavior of Ferritic Stainless Steel. Metallurgical and Materials Transactions A 49:6, pages 2219-2234.
Crossref
Crossref
Shigehiro Takajo, Kendall Hollis, Dustin Cummins, Eric Tegtmeier, David Dombrowski & Sven Vogel. (2018) Texture Evolution in U-10Mo Nuclear Fuel Foils during Plasma Spray Coating with Zr. Quantum Beam Science 2:2, pages 12.
Crossref
Crossref
P. Gong, Lin Sun, B. P. Wynne, E. J. Palmiere & W. M. Rainforth. (2018) The effect of thermomechanical controlled processing on recrystallisation and subsequent deformation-induced ferrite transformation textures in microalloyed steels. Journal of Materials Science 53:9, pages 6922-6938.
Crossref
Crossref
E. Aydogan, O. El-Atwani, S. Takajo, S.C. Vogel & S.A. Maloy. (2018) High temperature microstructural stability and recrystallization mechanisms in 14YWT alloys. Acta Materialia 148, pages 467-481.
Crossref
Crossref
G. Mandal, S. K. Ghosh, D. Chakrabarti & S. Chatterjee. (2018) Effects of Thermo-mechanical Process Parameters on Microstructure and Crystallographic Texture of High Ni–Mo Ultrahigh Strength Steel. Metallography, Microstructure, and Analysis 7:2, pages 222-238.
Crossref
Crossref
Nikhil Shajan, Kanwer Singh Arora, Brajesh Asati, Vikram Sharma & Mahadev Shome. (2018) Effects of Post-Weld Heat Treatment on the Microstructure and Toughness of Flash Butt Welded High-Strength Low-Alloy Steel. Metallurgical and Materials Transactions A 49:4, pages 1276-1286.
Crossref
Crossref
Toshiro Tomida. (2018) Variant selection mechanism by elastic anisotropy and double K-S relation for transformation texture in steel; difference between martensite and ferrite. Acta Materialia 146, pages 25-41.
Crossref
Crossref
O. A. Bagmet, V. V. Naumenko & K. S. Smetanin. (2018) A Study of the Cold Resistance of Pipe Coiled Stock Produced at Foundry-Rolling Works. Part 2. Metal Science and Heat Treatment 59:11-12, pages 689-696.
Crossref
Crossref
S. Das Bakshi, N. Javed, K.N. Sasidhar, T. Dhande, V. Sharma & M. Mukherjee. (2018) Effect of microstructure and crystallographic texture on mechanical anisotropy of Ti-Nb microalloyed hot rolled 800 MPa HSLA steel. Materials Characterization 136, pages 346-357.
Crossref
Crossref
Shigeki Kitsuya, Hirofumi Ohtsubo, Noriki Fujita, Katsuyuki Ichimiya & Kazukuni Hase. (2018) Effect of Crystallographic Texture on Anisotropy of Mechanical Properties in High Strength Martensitic Steel高強度マルテンサイト鋼の機械的特性の異方性に及ぼす集合組織の影響. Tetsu-to-Hagane 104:5, pages 258-263.
Crossref
Crossref
R. Mishnev, N. Dudova & R. Kaibyshev. (2018) On the origin of the superior long-term creep resistance of a 10% Cr steel. Materials Science and Engineering: A 713, pages 161-173.
Crossref
Crossref
Sakari Pallaspuro, Antti Kaijalainen, Saara Mehtonen, Jukka Kömi, Zhiliang Zhang & David Porter. (2018) Effect of microstructure on the impact toughness transition temperature of direct-quenched steels. Materials Science and Engineering: A 712, pages 671-680.
Crossref
Crossref
Liang Wang, Bin Wang & Peishan Zhou. (2018) Misorientation, grain boundary, texture and recrystallization study in X90 hot bend related to mechanical properties. Materials Science and Engineering: A 711, pages 588-599.
Crossref
Crossref
Soumya Chatterjee, Soumyajit Koley, Subhankar Das Bakshi & Mahadev Shome. (2017) Role of crystallographic texture, delamination and constraint on anisotropy in fracture toughness of API X70 line pipe steels. Materials Science and Engineering: A 708, pages 254-266.
Crossref
Crossref
M. L. Lobanov, M. D. Borodina, S. V. Danilov, I. Yu. Pyshmintsev & A. O. Struin. (2018) Texture Inheritance on Phase Transition in Low-Carbon, Low-Alloy Pipe Steel after Thermomechanical Controlled Processing. Steel in Translation 47:11, pages 710-716.
Crossref
Crossref
Robert Krakow, Robbie J. Bennett, Duncan N. Johnstone, Zoja Vukmanovic, Wilberth Solano-Alvarez, Steven J. Lainé, Joshua F. Einsle, Paul A. Midgley, Catherine M. F. Rae & Ralf Hielscher. (2017) On three-dimensional misorientation spaces. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 473:2206, pages 20170274.
Crossref
Crossref
Xiaoping Ma, Chengliang Miao, Brian Langelier & Sundaresa Subramanian. (2017) Suppression of strain-induced precipitation of NbC by epitaxial growth of NbC on pre-existing TiN in Nb-Ti microalloyed steel. Materials & Design 132, pages 244-249.
Crossref
Crossref
Z.P. Xiong, A.A. Saleh, A.G. Kostryzhev & E.V. Pereloma. (2017) Strain-induced ferrite formation and its effect on mechanical properties of a dual phase steel produced using laboratory simulated strip casting. Journal of Alloys and Compounds 721, pages 291-306.
Crossref
Crossref
Md. Basiruddin Sk, A. Ghosh, N. Rarhi, R. Balamuralikrishnan & D. Chakrabarti. (2017) Effect of Reheating Temperature and Cooling Treatment on the Microstructure, Texture, and Impact Transition Behavior of Heat-Treated Naval Grade HSLA Steel. Metallurgical and Materials Transactions A 48:7, pages 3231-3247.
Crossref
Crossref
N. R. Dudova, R. V. Mishnev & R. O. Kaibyshev. (2017) Sources of ultrahigh creep resistance of advanced martensitic steels. Doklady Physical Chemistry 474:2, pages 103-105.
Crossref
Crossref
H. Tervo, A. Kaijalainen, T. Pikkarainen, S. Mehtonen & D. Porter. (2017) Effect of impurity level and inclusions on the ductility and toughness of an ultra-high-strength steel. Materials Science and Engineering: A 697, pages 184-193.
Crossref
Crossref
Arpan Das. (2017) Calculation of Crystallographic Texture of BCC Steels During Cold Rolling. Journal of Materials Engineering and Performance 26:6, pages 2708-2720.
Crossref
Crossref
Hossein Beladi & Gregory S. Rohrer. (2016) The Role of Thermomechanical Routes on the Distribution of Grain Boundary and Interface Plane Orientations in Transformed Microstructures. Metallurgical and Materials Transactions A 48:6, pages 2781-2790.
Crossref
Crossref
P.G. Xu, Y. Tomota, Y. Arakaki, S. Harjo & H. Sueyoshi. (2017) Evaluation of austenite volume fraction in TRIP steel sheets using neutron diffraction. Materials Characterization 127, pages 104-110.
Crossref
Crossref
Arya Chatterjee, A. Dutta, Md Basiruddin Sk, R. Mitra, A. K. Bhaduri & D. Chakrabarti. (2017) Effect of Microalloy Precipitates on the Microstructure and Texture of Hot-Deformed Modified 9Cr-1Mo Steel. Metallurgical and Materials Transactions A 48:5, pages 2410-2424.
Crossref
Crossref
K. Koumatos & A. Muehlemann. (2017) A theoretical investigation of orientation relationships and transformation strains in steels. Acta Crystallographica Section A Foundations and Advances 73:2, pages 115-123.
Crossref
Crossref
Badirujjaman Syed, Sulthan Mohiddin Shariff, Gadhe Padmanabham, Shaumik Lenka, Basudev Bhattacharya & Saurabh Kundu. (2017) Influence of laser surface hardened layer on mechanical properties of re-engineered low carbon steel sheet. Materials Science and Engineering: A 685, pages 168-177.
Crossref
Crossref
Н. Р. Дудова, Р. В. Мишнев & Р.О. Кайбышев. (2017) ПРИЧИНЫ СВЕРХВЫСОКОГО СОПРОТИВЛЕНИЯ ПОЛЗУЧЕСТИ СОВРЕМЕННЫХ МАРТЕНСИТНЫХ СТАЛЕЙ, "Доклады Академии наук". Доклады Академии Наук:5, pages 589-592.
Crossref
Crossref
Naoki Yoshinaga, Natsuko Sugiura & Shunji Hiwatashi. (2017) A Novel Texture Improving Young’s Modulus in Rolling Direction of Hot Rolled Low Carbon Sheet Steel. ISIJ International 57:12, pages 2263-2265.
Crossref
Crossref
M A Ramírez, R Schouwenaars, P Eyckens, J Gawad, L Kestens, A Van Bael & P Van Houtte. (2017) Experimental validation and effect of modelling assumptions in the hierarchical multi-scale simulation of the cup drawing of AA6016 sheets. Modelling and Simulation in Materials Science and Engineering 25:1, pages 015002.
Crossref
Crossref
X.J. Shen, S. Tang, J. Chen, Z.Y. Liu, R.D.K. Misra & G.D. Wang. (2017) Grain refinement in surface layers through deformation-induced ferrite transformation in microalloyed steel plate. Materials & Design 113, pages 137-141.
Crossref
Crossref
Pete Bate, Peter Lundin, Eva Lindh-Ulmgren & Bevis Hutchinson. (2017) Application of laser-ultrasonics to texture measurements in metal processing. Acta Materialia 123, pages 329-336.
Crossref
Crossref
Gadadhar Sahoo, M. Deepa, Balbir Singh & Atul Saxena. (2016) Effect of Alloying Elements on Mechanical Properties of High P Low Alloy Steels. Transactions of the Indian Institute of Metals 70:1, pages 209-216.
Crossref
Crossref
Sudipta Patra, Abhijit Ghosh, Lokesh Kumar Singhal, Arijit Saha Podder, Jagmohan Sood, Vinod Kumar & Debalay Chakrabarti. (2016) Hot Deformation Behavior of As-Cast 2101 Grade Lean Duplex Stainless Steel and the Associated Changes in Microstructure and Crystallographic Texture. Metallurgical and Materials Transactions A 48:1, pages 294-313.
Crossref
Crossref
Felipe Castro Cerda, Bernd Schulz, Spyros Papaefthymiou, Alfredo Artigas, Alberto Monsalve & Roumen Petrov. (2016) The Effect of Ultrafast Heating on Cold-Rolled Low Carbon Steel: Formation and Decomposition of Austenite. Metals 6:12, pages 321.
Crossref
Crossref
R. Mishnev, N. Dudova, A. Fedoseeva & R. Kaibyshev. (2016) Microstructural aspects of superior creep resistance of a 10%Cr martensitic steel. Materials Science and Engineering: A 678, pages 178-189.
Crossref
Crossref
Felipe Castro Cerda, Leo Kestens, Alberto Monsalve & Roumen Petrov. (2016) The Effect of Ultrafast Heating in Cold-Rolled Low Carbon Steel: Recrystallization and Texture Evolution. Metals 6:11, pages 288.
Crossref
Crossref
S. Patra, A. Ghosh, J. Sood, L.K. Singhal, A.S. Podder & D. Chakrabarti. (2016) Effect of coarse grain band on the ridging severity of 409L ferritic stainless steel. Materials & Design 106, pages 336-348.
Crossref
Crossref
C. D. Schwindt, M. A. Bertinetti, L. Iurman, C. A. Rossit & J. W. Signorelli. (2015) Numerical study of the effect of martensite plasticity on the forming limits of a dual-phase steel sheet. International Journal of Material Forming 9:4, pages 499-517.
Crossref
Crossref
F. Castro Cerda, C. Goulas, I. Sabirov, S. Papaefthymiou, A. Monsalve & R.H. Petrov. (2016) Microstructure, texture and mechanical properties in a low carbon steel after ultrafast heating. Materials Science and Engineering: A 672, pages 108-120.
Crossref
Crossref
Antti Juhani Kaijalainen, Mia Liimatainen, Vili Kesti, Jouko Heikkala, Tommi Liimatainen & David A. Porter. (2016) Influence of Composition and Hot Rolling on the Subsurface Microstructure and Bendability of Ultrahigh-Strength Strip. Metallurgical and Materials Transactions A 47:8, pages 4175-4188.
Crossref
Crossref
S.V. Subramanian, Ma Xiaoping, Kashif Rehman & Hatem Zurob. 2016. Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016). Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)
119
124
.
Jian Kang, Cheng-ning Li, Guo Yuan & Guo-dong Wang. (2016) Improvement of strength and toughness for hot rolled low-carbon bainitic steel via grain refinement and crystallographic texture. Materials Letters 175, pages 157-160.
Crossref
Crossref
I. Yu. Pyshmintsev, A. O. Struin, A. M. Gervasyev, M. L. Lobanov, G. M. Rusakov, S. V. Danilov & A. B. Arabey. (2016) Effect of Bainite Crystallographic Texture on Failure of Pipe Steel Sheets Made by Controlled Thermomechanical Treatment. Metallurgist 60:3-4, pages 405-412.
Crossref
Crossref
Hyung-Won Park, Kei Shimojima, Sumio Sugiyama, Hisanao Komine & Jun Yanagimoto. (2016) Mechanical Properties and Anisotropies of 0.2% Carbon Steel with Bimodal Microstructure Subjected to Heavy-Reduction Controlled-Rolling Process. steel research international 87:7, pages 947-956.
Crossref
Crossref
Abhijit Ghosh, Sudipta Patra, Arya Chatterjee & Debalay Chakrabarti. (2016) Effect of Local Crystallographic Texture on the Fissure Formation During Charpy Impact Testing of Low-Carbon Steel. Metallurgical and Materials Transactions A 47:6, pages 2755-2772.
Crossref
Crossref
Alberto Monsalve, Alexis Guzmán, Flavio De Barbieri, Alfredo Artigas, Linton Carvajal, Oscar Bustos, Nelson F. Garza-Montes-de Oca & Rafael Colás. (2016) Mechanical and Microstructural Characterization of an Aluminum Bearing Trip Steel. Metallurgical and Materials Transactions A 47:6, pages 3088-3094.
Crossref
Crossref
S. Mandal, N.K. Tewary, S.K. Ghosh, D. Chakrabarti & S. Chatterjee. (2016) Thermo-mechanically controlled processed ultrahigh strength steel: Microstructure, texture and mechanical properties. Materials Science and Engineering: A 663, pages 126-140.
Crossref
Crossref
Kumkum Banerjee. (2016) Hydrogen-Induced Cold Cracking in High-Frequency Induction Welded Steel Tubes. Metallurgical and Materials Transactions A 47:4, pages 1677-1685.
Crossref
Crossref
R. Mishnev, N. Dudova & R. Kaibyshev. (2016) Low cycle fatigue behavior of a 10Cr–2W–Mo–3Co–NbV steel. International Journal of Fatigue 83, pages 344-355.
Crossref
Crossref
Roumen H. Petrov, Jurij Sidor & Leo A.I. Kestens. 2016. Encyclopedia of Iron, Steel, and Their Alloys. Encyclopedia of Iron, Steel, and Their Alloys
70
99
.
A. Ghosh, P. Modak, R. Dutta & D. Chakrabarti. (2016) Effect of MnS inclusion and crystallographic texture on anisotropy in Charpy impact toughness of low carbon ferritic steel. Materials Science and Engineering: A 654, pages 298-308.
Crossref
Crossref
A.J. Kaijalainen, P.P. Suikkanen, L.P. Karjalainen & D.A. Porter. (2016) Influence of subsurface microstructure on the bendability of ultrahigh-strength strip steel. Materials Science and Engineering: A 654, pages 151-160.
Crossref
Crossref
S. V. Subramanian, Ma Xiaoping, Kashif Rehman & Hatem Zurob. 2016. Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016). Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)
119
124
.
Diana Pérez Escobar, Sara Silva Ferreira de Dafé, Kim Verbeken & Dagoberto Brandão Santos. (2016) Effect of the Cold Rolling Reduction on the Microstructural Characteristics and Mechanical Behavior of a 0.06%C-17%Mn TRIP/TWIP Steel. steel research international 87:1, pages 95-106.
Crossref
Crossref
O.N. Senkov & S.L. Semiatin. (2015) Microstructure and properties of a refractory high-entropy alloy after cold working. Journal of Alloys and Compounds 649, pages 1110-1123.
Crossref
Crossref
C. Schwindt, F. Schlosser, M.A. Bertinetti, M. Stout & J.W. Signorelli. (2015) Experimental and Visco-Plastic Self-Consistent evaluation of forming limit diagrams for anisotropic sheet metals: An efficient and robust implementation of the M-K model. International Journal of Plasticity 73, pages 62-99.
Crossref
Crossref
Xiao-Long Yang, Yun-Bo Xu, Xiao-Dong Tan & Di Wu. (2015) Relationships among crystallographic texture, fracture behavior and Charpy impact toughness in API X100 pipeline steel. Materials Science and Engineering: A 641, pages 96-106.
Crossref
Crossref
M. M. Humane, K. S. Thool, R. K. Minz & Leo A. I. Kestens. (2014) Microstructures and Textures of Hot Rolled and Hot Rolled-Normalized 2.9 % Silicon Steel Sheets. Transactions of the Indian Institute of Metals 68:3, pages 371-381.
Crossref
Crossref
Ercan Cakmak, Hahn Choo, Jun-Yun Kang & Yang Ren. (2015) Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies. Metallurgical and Materials Transactions A 46:5, pages 1860-1877.
Crossref
Crossref
A Kaijalainen, P Suikkanen & D A Porter. (2015) Effect of re-austenitization on the transformation texture inheritance. IOP Conference Series: Materials Science and Engineering 82, pages 012058.
Crossref
Crossref
Roumen H. Petrov, John J. Jonas, Leo A.I. Kestens & J. Malcolm Gray. 2015. Oil and Gas Pipelines. Oil and Gas Pipelines
157
186
.
Arya Chatterjee, D. Chakrabarti, A. Moitra, R. Mitra & A.K. Bhaduri. (2015) Effect of deformation temperature on the ductile–brittle transition behavior of a modified 9Cr–1Mo steel. Materials Science and Engineering: A 630, pages 58-70.
Crossref
Crossref
Diana Pérez Escobar, Sara Silva Ferreira de Dafé & Dagoberto Brandão Santos. (2015) Martensite reversion and texture formation in 17Mn-0.06C TRIP/TWIP steel after hot cold rolling and annealing. Journal of Materials Research and Technology 4:2, pages 162-170.
Crossref
Crossref
V. Venegas, F. Caleyo, L.E. Vázquez, T. Baudin & J.M. Hallen. (2015) On the Influence of Crystallographic Texture on Pitting Corrosion in Pipeline Steels. International Journal of Electrochemical Science 10:4, pages 3539-3552.
Crossref
Crossref
Displaying 200 of 334 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list