999
Views
249
CrossRef citations to date
0
Altmetric
Articles

Progress in joining of advanced materials

Pages 1-44 | Published online: 18 Jul 2013

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (31)

Bindhushree B S, Shanmuganatan S P, Saravanabavan D & Madhusudan M. (2024) An investigation of process parameter influences on dissimilar friction stir welding of cast aluminum alloy joints. Materials and Manufacturing Processes 39:2, pages 188-206.
Read now
T. N. Prasanthi, C. Sudha & S. Saroja. (2023) An overview on the microstructure and properties of Fe/Ti based dissimilar joints. Materials Science and Technology 39:17, pages 2595-2615.
Read now
Shravan C, N. Radhika, N. H. Deepak Kumar & B. Sivasailam. (2023) A review on welding techniques: properties, characterisations and engineering applications. Advances in Materials and Processing Technologies 0:0, pages 1-56.
Read now
Jeongwoo Heo, N. Hashimoto, H. Oka & H. Noto. (2022) Improvement of thermal conductivity by adding tungsten and/or copper wire in F82H. Journal of Nuclear Science and Technology 59:2, pages 216-221.
Read now
Chunyan Wang, Xianfen Li, Zhihong Zhong, Kuijing Song, Guoping Wang, Wei Zhou & Yucheng Wu. (2020) Microstructure and mechanical properties of W/steel joints diffusion bonded with Nb and Nb/Ni interlayers by spark plasma sintering. Journal of Adhesion Science and Technology 34:24, pages 2638-2651.
Read now
SGK. Manikandan, D. Sivakumar & M. Kamaraj. (2016) High temperature mechanical properties of cryogenically cooled alloy 718 weldments. Materials at High Temperatures 33:3, pages 257-269.
Read now
Q. Chu, X. W. Yang, W. Y. Li & Y. B. Li. (2016) Microstructure and mechanical behaviour of pinless friction stir spot welded AA2198 joints. Science and Technology of Welding and Joining 21:3, pages 164-170.
Read now
G. Çam, G. İpekoğlu & H. Tarık Serindağ. (2014) Effects of use of higher strength interlayer and external cooling on properties of friction stir welded AA6061-T6 joints. Science and Technology of Welding and Joining 19:8, pages 715-720.
Read now
S. Kundu, S. M. Bhola, B. Mishra & S. Chatterjee. (2014) Structure and properties of solid state diffusion bonding of 17-4PH stainless steel and titanium. Materials Science and Technology 30:2, pages 248-256.
Read now
D He, K Yang, M Li, H Guo, N Li, R Lai & S Ye. (2013) Comparison of single and double pass friction stir welding of skin–stringer aviation aluminium alloy. Science and Technology of Welding and Joining 18:7, pages 610-615.
Read now
Y Bozkurt, S Salman & G Çam. (2013) Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints. Science and Technology of Welding and Joining 18:4, pages 337-345.
Read now
. (2011) Letter to the Editor. Materials Science and Technology 27:10, pages 1610-1612.
Read now
L O Osoba, R K Sidhu & O A Ojo. (2011) On preventing HAZ cracking in laser welded DS Rene 80 superalloy. Materials Science and Technology 27:5, pages 897-902.
Read now
G. Çam. (2011) Friction stir welded structural materials: beyond Al-alloys. International Materials Reviews 56:1, pages 1-48.
Read now
SwarupK. Ghosh & S. Chatterjee. (2010) On the Direct Diffusion Bonding of Titanium Alloy to Stainless Steel. Materials and Manufacturing Processes 25:11, pages 1317-1323.
Read now
F. S. Qu, K. F. Zhang & B. Y. Li. (2010) Multisheet structure of Inconel 718 superalloy processed by LBW/SPF technology and its microstructure. Materials Science and Technology 26:10, pages 1232-1238.
Read now
H.R. Zhang & O.A. Ojo. (2009) Non-equilibrium liquid phase dissolution of δ phase precipitates in a nickel-based superalloy. Philosophical Magazine Letters 89:12, pages 787-794.
Read now
Y. Coo. (2007) Effect of in situ reaction on microstructure of TIG welding SiCp/A356 with Ti as filler metal. Materials Science and Technology 23:8, pages 917-922.
Read now
G.D. Janaki Ram, A. Venugopal Reddy, K. Prasad Rao & G. Madhusudhan Reddy. (2006) High temperature mechanical properties of Inconel 718 pulsed Nd–YAG laser welds. Materials at High Temperatures 23:1, pages 29-37.
Read now
G. D. Janaki Ram, A. Venugopal Reddy, K. Prasad Rao & G. Madhusudhan Reddy. (2005) Microstructure and mechanical properties of Inconel 718 electron beam welds. Materials Science and Technology 21:10, pages 1132-1138.
Read now
G.D. Janaki Ram, A. Venugopal Reddy, K. Prasad Rao & G. Madhusudhan Reddy. (2004) Control of Laves phase in Inconel 718 GTA welds with current pulsing. Science and Technology of Welding and Joining 9:5, pages 390-398.
Read now
M. B. Henderson, D. Arrell, R. Larsson, M. Heobel & G. Marchant. (2004) Nickel based superalloy welding practices for industrial gas turbine applications. Science and Technology of Welding and Joining 9:1, pages 13-21.
Read now
Guoge Zhang, Roop Singh Chandel, Hong Pheow Seow & Huey Hoon Hng. (2003) Microstructural Features of Solid-State Diffusion Bonded Incoloy MA 956. Materials and Manufacturing Processes 18:4, pages 599-608.
Read now
X. Cao, W. Wallace, J.-P. Immarigeon & C. Poon. (2003) Research and Progress in Laser Welding of Wrought Aluminum Alloys. II. Metallurgical Microstructures, Defects, and Mechanical Properties. Materials and Manufacturing Processes 18:1, pages 23-49.
Read now
X. Cao, W. Wallace, C. Poon & J.-P. Immarigeon. (2003) Research and Progress in Laser Welding of Wrought Aluminum Alloys. I. Laser Welding Processes. Materials and Manufacturing Processes 18:1, pages 1-22.
Read now
M. Koçak, M. Pakdil & G. Çam. (2002) Fracture behaviour of diffusion bonded titanium alloys with strength mismatch. Science and Technology of Welding and Joining 7:4, pages 187-196.
Read now
J. Ding, J. N. Wang, Z. H. Hu & D. Y. Ding. (2002) Joining of γ-TiAl to low alloy steel by electron beam welding. Materials Science and Technology 18:8, pages 908-912.
Read now
Zhang Guoge, R. S. Chandel & H. P. Seow. (2001) SOLID-STATE DIFFUSION BONDING OF INCONEL ALLOY 718 TO 17-4 PH STAINLESS STEEL. Materials and Manufacturing Processes 16:2, pages 265-279.
Read now
G. Çam, V. Ventzke, J.F. Dos Santos, M. Koçak, G. Jennequin & P. Gonthier-Maurin. (1999) Characterisation of electron beam welded aluminium alloys. Science and Technology of Welding and Joining 4:5, pages 317-323.
Read now

Articles from other publishers (218)

Jun Hu, Xin Lin & Yunlong Hu. (2024) High wear resistance and strength of Hastelloy X reinforced with TiC fabricated by laser powder bed fusion additive manufacturing. Applied Surface Science 648, pages 159004.
Crossref
A. Günen, U. Gürol, M. Koçak & G. Çam. (2023) Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature. Progress in Additive Manufacturing 8:6, pages 1281-1301.
Crossref
Naveen Reddy Thuniki, Krishna Prasad Gangavarapu, Vikram G. Brijendra, Kanakaiah Budda & V. V. Bhanu Prasad. (2023) Low‐temperature curable adhesive for joining SiC/SiC components: Their application in wide range of temperatures. International Journal of Applied Ceramic Technology.
Crossref
Uğur Gürol, Batuhan Turgut, Hülya Kumek, Savas Dilibal & Mustafa Koçak. (2023) Fabrication and Characterization of Wire Arc Additively Manufactured Ferritic-Austenitic Bimetallic Structure. Metals and Materials International.
Crossref
Wanyang Li, Weiwei Liu, Zeyuan Liu, Zhengkai Wang, Yukun Xia, Huanqiang Liu, Yujin Huang, Zongyu Ma, Jianrong Song, Fengtao Wang, Shujie Liu & Yingzhong Zhang. (2023) Effect of CNT content on the microstructure and friction characteristics of DED-fabricated CNTs-Ni60/WC coatings. Surface and Coatings Technology 473, pages 129938.
Crossref
Libing Huang, Honggang Dong, Jiachen Li, Chao Li, Peng Li, Dongsheng Zhao, Shuyan Shi, Xiaoying Liu & Xiong Ma. (2023) Regulating the interfacial microstructure in TiAl/Ti2AlNb vacuum diffusion bonded joints for superior mechanical performance. Materials Science and Engineering: A 887, pages 145761.
Crossref
Giridhar Gudivada & Ajoy Kumar Pandey. (2023) Recent developments in nickel-based superalloys for gas turbine applications: Review. Journal of Alloys and Compounds 963, pages 171128.
Crossref
Ömer Saltuk Bölükbaşı, Tarık Serindağ, Uğur Gürol, Ali Günen & Gürel Çam. (2023) Improving oxidation resistance of wire arc additive manufactured Inconel 625 Ni-based superalloy by pack aluminizing. CIRP Journal of Manufacturing Science and Technology 46, pages 89-97.
Crossref
Amirhossein Mashhuriazar, Mohammadhassan Badihehaghdam, C. Hakan Gur, Murat Tolga Ertürk, Caner Batıgün, Suha Tirkes, Zainuddin Sajuri & Hamid Omidvar. (2022) Investigating the Effects of Repair Welding on Microstructure, Mechanical Properties, and Corrosion Behavior of IN-939 Superalloy. Journal of Materials Engineering and Performance 32:15, pages 7016-7028.
Crossref
Tanvir Singh. (2023) Nanoparticles reinforced joints produced using friction stir welding: a review. Engineering Research Express 5:2, pages 022001.
Crossref
Caio B. S. Maior, Eduardo N. Menezes, Márcio C. Moura, Isis D. Lins, Manoel F. da Silva, Marcus V. C. Magalhães, Guilherme V. Ribeiro & Ricardo R. Vasques. (2023) Fatigue life assessment for incremental innovation of novel O&G equipment using a calibrated finite element and Monte Carlo samplings. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:6.
Crossref
Zhenguo Guo, Tiejun Ma, Xi Chen, Xiawei Yang, Jun Tao, Ju Li, Wenya Li & Achilles Vairis. (2023) Interfacial bonding mechanism of linear friction welded dissimilar Ti2AlNb–Ti60 joint: Grain intergrowth induced by combined effects of dynamic recrystallization, phase transformation and elemental diffusion. Journal of Materials Research and Technology 24, pages 5660-5668.
Crossref
Markus Ramsperger & Simon Eichler. (2023) Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization. Metallurgical and Materials Transactions A 54:5, pages 1730-1743.
Crossref
Akhil Reddy Beeravolu, Nagumothu Kishore Babu, Mahesh Kumar Talari, Ateekh Ur Rehman & Prakash Srirangam. (2023) Influence of Microstructure and Mechanical Properties of Dissimilar Rotary Friction Welded Inconel to Stainless Steel Joints. Materials 16:8, pages 3049.
Crossref
Sanjay Raj & Pankaj Biswas. (2023) Effect of induction preheating on microstructure and mechanical properties of friction stir welded dissimilar material joints of Inconel 718 and SS316L. CIRP Journal of Manufacturing Science and Technology 41, pages 160-179.
Crossref
Yong Wu, Gang Liu, Zhi-Qiang Liu, Ze-Jun Tang & Bin Wang. (2018) Microstructure, mechanical properties and post-weld heat treatments of dissimilar laser-welded Ti2AlNb/Ti60 sheet. Rare Metals 42:4, pages 1332-1342.
Crossref
Ferhat CERİTBİNMEZ, Ali GÜNEN, Uğur GÜROL & Gürel ÇAM. (2023) Dövme ve Eklemeli İmalat Yöntemiyle Üretilmiş Inconel 625 Alaşımların Termal Yöntemle Hızlı Delinmesinde Elektrot Aşınmasının İncelenmesi. International Journal of Advances in Engineering and Pure Sciences 35:1, pages 89-99.
Crossref
Xiufeng Han, Guoliang Zhu, Qingbiao Tan & Baode Sun. (2023) Effect of Semi-Aging Heat Treatment on Microstructure and Mechanical Properties of an Inertia Friction Welded Joint of FGH96 Powder Metallurgy Superalloy. Metals 13:3, pages 632.
Crossref
Ken'ichiro Kita & Mikinori Hotta. (2022) Joining of aluminum and ceramic substrates by interposing molten aluminum–silicon alloy. International Journal of Applied Ceramic Technology 20:2, pages 995-1001.
Crossref
Lin Li, Furong Liu, Shijin Nie, Qin Wang, Rongxia Zhao, Yongzhi Zhang, Haoyuan Feng & Xin Lin. (2023) Effect of Thermal Cycling on Grain Evolution and Micro-Segregation in Selective Laser Melting of FGH96 Superalloy. Metals 13:1, pages 121.
Crossref
Silviu-Adrian Oana, Olimpiu Karancsi, Ion Mitelea, Ion-Dragoş Uţu & Corneliu Marius Craciunescu. (2023) The role of filler material selection in the laser welding process of deformable 6xxx series aluminum alloys. Materials Today: Proceedings 78, pages 287-294.
Crossref
Dongdong Gu. 2023. Laser Additive Manufacturing of Metallic Materials and Components. Laser Additive Manufacturing of Metallic Materials and Components 107 139 .
Lukas Haußmann, Bernd Burbaum, Britta Stöhr, Andreas Förner, Lisa Freund, Mathias Göken & Steffen Neumeier. (2022) Crack‐Free Welding of a Co‐Base Superalloy with High γ' Precipitate Fraction. Advanced Engineering Materials 24:12.
Crossref
Manil Raj, Bidyapati Mishra, Umesh M. Ahire, Haripria T. Padmaganesan, M.J.N.V. Prasad & K. Narasimhan. (2022) Microstructure and mechanical response of dissimilar joint of ferritic interstitial-free steel to austenitic low-density steel produced by diffusion bonding. Materials Science and Engineering: A 856, pages 144020.
Crossref
Li Li, Shumei Lou & Chunming Wang. (2022) Improvement of Laser-Induction Hybrid Welding Processing on Electrochemical Corrosion Properties of S690QL Steel Weld Seam. JOM 74:9, pages 3607-3615.
Crossref
Igor Polozov, Anna Gracheva & Anatoly Popovich. (2022) Processing, Microstructure, and Mechanical Properties of Laser Additive Manufactured Ti2AlNb-Based Alloy with Carbon, Boron, and Yttrium Microalloying. Metals 12:8, pages 1304.
Crossref
Lei Sheng, Xue Zhengwei, Liu Yafeng, Li Yun, Jiang Dongsheng & Wang Ping. (2022) Effect of annealing temperature on the structure and properties of FeCoCrNiMo high-entropy alloy. High Temperature Materials and Processes 41:1, pages 417-423.
Crossref
Xuan Wang, Yan Tang, Maohua Quan, Lei Zheng & Ye Meng. (2022) Formation of columnar strengthening phases and mechanical properties of Nb–Ti–Al alloy by spark plasma sintering. Materials Science and Engineering: A 851, pages 143616.
Crossref
Yuxin Jiao, Jing Li, Weibing Wang, Longfei Zhang & Qinghua Li. (2022) Surface modification of Kevlar improves the mechanical and friction properties of Kevlar/low-carbon steel composite structures. Colloids and Surfaces A: Physicochemical and Engineering Aspects 647, pages 129128.
Crossref
Zhijie Zhang, Jian Huang, Chenwu Yao & Xing Zhang. (2022) Effect of Ag alloying on the microstructure and mechanical properties of laser welded-brazed Ti/Al dissimilar joints. Materials Science and Engineering: A 848, pages 143359.
Crossref
Li Li, Shumei Lou & Chunming Wang. (2022) Effect of molten pool and vapor/plasma plume dynamic behavior of laser-induction hybrid welding on weld formation of S690QL steel. Optics & Laser Technology 150, pages 107928.
Crossref
Nicholas Andreae, Dharmendra Chalasani & Mukesh Jain. (2022) Evaluating the Characteristics of Cast AZ91 Magnesium Alloy for Upset Protrusion Joining Method. Journal of Materials Engineering and Performance 31:5, pages 4006-4024.
Crossref
Nicholas Andreae, Dharmendra Chalasani & Mukesh Jain. (2022) Upset Protrusion Joining (UPJ) characteristics of cast AM60 magnesium alloy to join with dissimilar material. The International Journal of Advanced Manufacturing Technology 120:1-2, pages 329-348.
Crossref
Sibo Wang, Chunyan Yan & Zhengjia Gu. (2022) Weld Formation, Microstructure Evolution and Mechanical Property of Laser-Arc Hybrid Welded AZ31B Magnesium Alloy. Metals 12:4, pages 696.
Crossref
Amir Mostafaei, Cang Zhao, Yining He, Seyed Reza Ghiaasiaan, Bo Shi, Shuai Shao, Nima Shamsaei, Ziheng Wu, Nadia Kouraytem, Tao Sun, Joseph Pauza, Jerard V. Gordon, Bryan Webler, Niranjan D. Parab, Mohammadreza Asherloo, Qilin Guo, Lianyi Chen & Anthony D. Rollett. (2022) Defects and anomalies in powder bed fusion metal additive manufacturing. Current Opinion in Solid State and Materials Science 26:2, pages 100974.
Crossref
Qihang Xv, Gan Tian, Wei Zhang, Zhengwei Yang & Anbo Ming. (2022) Effect of the weld parameter strategy on mechanical properties of double-sided laser-welded 2195 Al–Li alloy joints with filler wire. High Temperature Materials and Processes 41:1, pages 92-110.
Crossref
Itshepeng Mogaleadi Christinah Bopape, Enoch Nifise Ogunmuyiwa, Mxolisi Brendon Shongwe, Nthape Percyval Mphasha & Nthabiseng Ntholeng. (2021) Effect of Co and Fe contents on the microstructure and corrosion behaviour of heat-treated Ni-Fe-Co superalloys in 3.5 wt% NaCl aqueous solution. The International Journal of Advanced Manufacturing Technology 119:1-2, pages 287-301.
Crossref
D. A. Baranov, S. S. Zhatkin, K. V. Nikitin, A. A. Parkin, E. Yu. Shchedrin & V. B. Deev. (2022) Study on the Influence of Different Energy Sources on the Structure and Mechanical Properties of a Welded Joint from an EP693 Nickel Alloy. Russian Journal of Non-Ferrous Metals 63:1, pages 57-62.
Crossref
Idir Hadji, Riad Badji, Mohamed Gaceb & Billel Cheniti. (2021) Dissimilar FSW of AA2024 and AA7075: effect of materials positioning and tool deviation value on microstructure, global and local mechanical behavior. The International Journal of Advanced Manufacturing Technology 118:7-8, pages 2391-2403.
Crossref
Qian Wang, Nan Chen, Guoping Du, Changshuang Jiang & Liang Chen. (2022) Cohesion properties and fracture toughness of Fe/W interfaces with additions of Re and Cr. Vacuum 195, pages 110703.
Crossref
J. Raute, T. Jokisch, M. Biegler & M. Rethmeier. (2022) Effects on crack formation of additive manufactured Inconel 939 sheets during electron beam welding. Vacuum 195, pages 110649.
Crossref
Sudarsanam S. Babu. 2022. Encyclopedia of Materials: Metals and Alloys. Encyclopedia of Materials: Metals and Alloys 245 262 .
Sudarsanam S. Babu. 2022. Encyclopedia of Materials: Metals and Alloys. Encyclopedia of Materials: Metals and Alloys 3 12 .
Bakhtiar Ariff Baharudin, Mazli Mustapha, Mohamad Azmeer Azman, Amirul Naim Shamsuddin, Azman Ismail, Tuan Muhammad Nurkholish Tuan Anuwa, Fauziah Ab Rahman, Fauzuddin Ayob, Darulihsan Abdul Hamid & Mohd Afendi Rojan. 2022. Design in Maritime Engineering. Design in Maritime Engineering 359 364 .
D. А. BaranovS. S. ZhatkinK. V. NikitinA. A. ParkinE. Yu. Shchedrin & V. B. Deev. (2021) Study into the effect of different energy sources on the structure and mechanical properties of EP693 nickel alloy weld joint. Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy) 27:6, pages 22-30.
Crossref
Serkan GÜLER, Hüseyin Tarık SERİNDAĞ & Gürel ÇAM. (2021) Tel Ark Eklemeli İmalat: Son Gelişmeler ve Değerlendirmeler**Wire Arc Additive Manufacturing (WAAM): Recent Developments and Prospects. Mühendis ve Makina 63:706, pages 82-116.
Crossref
Yan Zhang, YuanBo Bi, JianPing Zhou, DaQian Sun & HongMei Li. (2021) Weldability and machinability of the dissimilar joints of Ti alloy and stainless steel – A review. International Journal of Materials Research 112:10, pages 826-847.
Crossref
Bharath Bhushan Ravichander, Sourabh Thakare, Aditya Ganesh-Ram, Behzad Farhang, Manjunath Hanumantha, Yiran Yang, Narges Shayesteh Moghaddam & Amirhesam Amerinatanzi. (2021) Cost-Aware Design and Fabrication of New Support Structures in Laser Powder Bed Fusion: Microstructure and Metallurgical Properties. Applied Sciences 11:21, pages 10127.
Crossref
Yongpeng Tang, Kaveh Edalati, Takahiro Masuda, Yoichi Takizawa, Manabu Yumoto & Zenji Horita. (2021) Grain refinement and superplasticity of Inconel 718 processed by Multi-Pass High-Pressure sliding. Materials Letters 300, pages 130144.
Crossref
Wenquan Li, Kenjiro Sugio, Xingang Liu, Motomichi Yamamoto, Ying Guo, Song Zhu & Gen Sasaki. (2021) Microstructure evolution and mechanical properties of 308L stainless steel coatings fabricated by laser hot wire cladding. Materials Science and Engineering: A 824, pages 141825.
Crossref
Dmitry A. BaranovAnatoly A. ParkinSergey S. Zhatkin. (2021) Analysis of Defects at Laser Welding of Heat-Resistant Alloy KhN45VMTYuBR. Defect and Diffusion Forum 410, pages 108-114.
Crossref
Qian Ran, Song Xiang, Yuanbiao Tan & Shuang Hu. (2021) Effect of heat input on microstructure and mechanical properties of GH159 and GH4169 dissimilar joints by laser beam welding. Materials Research Express 8:8, pages 086520.
Crossref
Ying-Li Li, Wei-Jun Xia, Hong-Ge Yan, Ji-Hua Chen, Tian Ding, You-Ping Sun & Xin-Yu Li. (2020) Microstructure and mechanical properties of friction-stir-welded high-Mg-alloyed Al–Mg alloy plates at different rotating rates. Rare Metals 40:8, pages 2167-2178.
Crossref
D. A. Baranov, S. S. Zhatkin, V. I. Nikitin, V. B. Deev, K. V. Nikitin, A. Yu. Barinov & D. M. Yudin. (2021) Ensuring Strength in Laser Welds Made Using the Dispersion-Hardened EP693 Nickel Alloy. Russian Journal of Non-Ferrous Metals 62:4, pages 441-447.
Crossref
D. A. BaranovS. S. ZhatkinV. I. NikitinV. B. Deev, K. V. NikitinA. Yu. BarinovD. M. Yudin. (2021) Ensuring the strength of welded joints in laser welding of EP693 heat-resistant dispersion-hardening nickel alloy. Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy):3, pages 57-65.
Crossref
Peng LIN, Xian-zheng XI, Wen-kai ZHAO, Rui-hong YANG, Fei LIN, Xiao-lei CUI & Gang LIU. (2021) Microstructure and mechanical properties of Ti-6Al-4V/Ti-22Al-25Nb joint formed by diffusion bonding. Transactions of Nonferrous Metals Society of China 31:5, pages 1339-1349.
Crossref
Tanveer Majeed, Yashwant Mehta & Arshad Noor Siddiquee. (2020) Challenges in joining of unequal thickness materials for aerospace applications: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235:4, pages 934-945.
Crossref
Nicholas Andreae, Dharmendra Chalasani & Mukesh Jain. (2021) Development of a laboratory-scale Upset Protrusion Joining (UPJ) system for dissimilar materials. The International Journal of Advanced Manufacturing Technology 113:9-10, pages 2725-2738.
Crossref
So‐Yeon Park, Kyu‐Sik Kim, Min‐Cheol Kim, Michael E. Kassner & Kee‐Ahn Lee. (2020) Effect of Post‐heat Treatment on the Tensile and Cryogenic Impact Toughness Properties of Inconel 718 Manufactured by Selective Laser Melting. Advanced Engineering Materials 23:3.
Crossref
Wen Ding, Ning Liu, Jiacheng Fan, Jing Cao & Xiaojing Wang. (2021) Diffusion bonding of copper to titanium using CoCrFeMnNi high-entropy alloy interlayer. Intermetallics 129, pages 107027.
Crossref
Oana Silviu-Adrian, Ion Mitelea, Natanael Simon & Ciprian Pavel Lucian. (2021) Influence of laser beam power on the heterogeneous welded joints morphology of deformable aluminium alloys. Materials Today: Proceedings 45, pages 4349-4355.
Crossref
Rabindra Prasad, Harikishor Kumar, Nitesh K. Sinha, S.P. Tewari, J.K. Singh, Siddharth Yadav & Manish Deo. (2021) Characterization of A356/(fly ash + red mud) surface hybrid composite fabricated by friction stir processing. Materials Today: Proceedings 46, pages 1476-1480.
Crossref
Baoping Ji, Qingdong Zhang, Jianshu Cao, Hao Li & Boyang Zhang. (2021) Non-contact detection of delamination in stainless steel/carbon steel composites with laser ultrasonic. Optik 226, pages 165893.
Crossref
O.A. Ojo, N.L. Richards & K.R. Vishwakarma. 2021. Welding and Joining of Aerospace Materials. Welding and Joining of Aerospace Materials 199 228 .
Michael Robinson, Quanquan Han, Heng Gu, Shwe Soe & Rossitza Setchi. 2021. Sustainable Design and Manufacturing 2020. Sustainable Design and Manufacturing 2020 395 402 .
Yuzhou Sun, Lan Chen, Lin Li & Xudong Ren. (2020) High-temperature oxidation behavior and mechanism of Inconel 625 super-alloy fabricated by selective laser melting. Optics & Laser Technology 132, pages 106509.
Crossref
L. Delcuse, S. Bahi, U. Gunputh, A. Rusinek, P. Wood & M.H. Miguelez. (2020) Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy. Additive Manufacturing 36, pages 101339.
Crossref
Bingchun Jiang, Quan Chen & Jiang Yang. (2020) Advances in joining technology of carbon fiber-reinforced thermoplastic composite materials and aluminum alloys. The International Journal of Advanced Manufacturing Technology 110:9-10, pages 2631-2649.
Crossref
Min Min, Shuiting Ding, Xiao Yu, Shijian Zhang, Haowen Zhong, Gennady Efimovich Remnev, Xiaoyun Le & Yu Zhou. (2020) Investigation of the Effects of an Intense Pulsed Ion Beam on the Surface Melting of IN718 Superalloy Prepared with Selective Laser Melting. Metals 10:9, pages 1178.
Crossref
Mohammadreza Amelzadeh & Seyyed Ehsan Mirsalehi. (2020) Dissimilar joining of WC-Co to steel by low-temperature brazing. Materials Science and Engineering: B 259, pages 114597.
Crossref
Tanaporn Rojhirunsakool & Kumpanat Sirivedin. (2020) Investigation of Welding Speed Parameters on Ni-Base Superalloy by Laser Welding Process. Key Engineering Materials 856, pages 85-91.
Crossref
Igor Polozov, Vadim Sufiiarov, Artem Kantyukov, Nikolay Razumov, Ivan Goncharov, Tagir Makhmutov, Alexey Silin, Artem Kim, Kirill Starikov, Alexey Shamshurin & Anatoly Popovich. (2020) Microstructure, densification, and mechanical properties of titanium intermetallic alloy manufactured by laser powder bed fusion additive manufacturing with high-temperature preheating using gas atomized and mechanically alloyed plasma spheroidized powders. Additive Manufacturing 34, pages 101374.
Crossref
Gopinath Thirunavukarasu, Sukumar Kundu, Vivek V. Patel & Alankar Alankar. (2020) Analytical Investigation on the Evolution and Growth of β-Ti and Fe-Nb-Based Intermetallics in Diffusion Coupled Joints of Ti6Al4V|Nb|SS. Diffusion Foundations 27, pages 3-24.
Crossref
Yachao Wang & Jing Shi. (2020) Effect of Post Heat Treatment on the Microstructure and Tensile Properties of Nano TiC Particulate Reinforced Inconel 718 by Selective Laser Melting. Journal of Manufacturing Science and Engineering 142:5.
Crossref
Dang-Hyok Yoon & Ivar E. Reimanis. (2020) A review on the joining of SiC for high-temperature applications. Journal of the Korean Ceramic Society 57:3, pages 246-270.
Crossref
Enrique Soriano Heras, Higinio Rubio, Alejandro Bustos & Juan Carlos García Prada. (2020) Automatic Expanding Mandrel with Air Sensing Device: Design and Analysis. Applied Sciences 10:7, pages 2551.
Crossref
Susmita Datta, Mohammad Shahid Raza, Amit Kumar Das, Partha Saha & Dilip Kumar Pratihar. (2020) Experimental investigations and parametric optimization of laser beam welding of NiTinol sheets by metaheuristic techniques and desirability function analysis. Optics & Laser Technology 124, pages 105982.
Crossref
Huaqiang Fu, Yong Xiao, Rongguo Song, Zhe Wang, Hongjun Ji & Daping He. (2020) Rapid soldering of flexible graphene assembled films at low temperature in air with ultrasonic assistance. Carbon 158, pages 55-62.
Crossref
S. Kovacevic, R. Pan, D.P. Sekulic & S.Dj. Mesarovic. (2020) Interfacial energy as the driving force for diffusion bonding of ceramics. Acta Materialia 186, pages 405-414.
Crossref
Sipokazi Mabuwa & Velaphi Msomi. (2020) Review on Friction Stir Processed TIG and Friction Stir Welded Dissimilar Alloy Joints. Metals 10:1, pages 142.
Crossref
Haluk Kejanli. (2020) Diffusion welding of stainless steel 304L/Monel K-500 composite materials produced with different methods. Advanced Composites Letters 29, pages 2633366X2091798.
Crossref
Niraj Kumar & Ashish Das. (2020) Ecofriendly energy efficient welding of aluminium matrix composites for aerospace applications: A state of art review. Materials Today: Proceedings 26, pages 1666-1675.
Crossref
W. Tillmann, T. Ulitzka, L. Wojarski, M. Manka, H. Ulitzka & D. Wagstyl. (2019) Development of high entropy alloys for brazing applications. Welding in the World 64:1, pages 201-208.
Crossref
Adarsh Shukla, Sanket Sarkar, A. Durga, Raghav Adharapurapu, Laura Dial & Sanjay K. Sondhi. 2020. Superalloys 2020. Superalloys 2020 1066 1074 .
P. Shenbaga Velu, N. J. Vignesh & N. Rajesh Jesudoss Hynes. 2020. Surface Engineering of Modern Materials. Surface Engineering of Modern Materials 81 101 .
P. Shenbaga Velu, N. Rajesh Jesudoss Hynes & N. J. Vignesh. (2019) Joining of AA 6061/Ti–6Al–4V with zinc interlayer using friction welding process. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:12.
Crossref
Yachao Wang & Jing Shi. (2019) Microstructure and Properties of Inconel 718 Fabricated by Directed Energy Deposition with In-Situ Ultrasonic Impact Peening. Metallurgical and Materials Transactions B 50:6, pages 2815-2827.
Crossref
Li Li, Gaoyang Mi, Xiong Zhang, Lingda Xiong, Zhengwu Zhu & Chunming Wang. (2019) The influence of induction pre-heating on microstructure and mechanical properties of S690QL steel joints by laser welding. Optics & Laser Technology 119, pages 105606.
Crossref
M.-N. Avettand-Fènoël, K. Naji & Ph. Pouligny. (2019) Brazing vs. diffusion welding of graded Fe based matrix composite and yttria stabilized zirconia. Journal of Manufacturing Processes 45, pages 557-570.
Crossref
John H. Boswell, Daniel Clark, Wei Li & Moataz M. Attallah. (2019) Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy. Materials & Design 174, pages 107793.
Crossref
Jun Yang, Jinglong Li & Feng Jin. (2019) Effect of welding parameters on high-temperature tensile and fatigue properties of FGH96 inertia friction welded joints. Welding in the World 63:4, pages 1033-1053.
Crossref
Quanquan Han & Yang Jiao. (2019) Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting. The International Journal of Advanced Manufacturing Technology 102:9-12, pages 3315-3324.
Crossref
Christopher S. Lefky, Thomas G. Gallmeyer, Senthamilaruvi Moorthy, Aaron Stebner & Owen J. Hildreth. (2019) Microstructure and corrosion properties of sensitized laser powder bed fusion printed Inconel 718 to dissolve support structures in a self-terminating manner. Additive Manufacturing 27, pages 526-532.
Crossref
Jonathan P. Galler, John N. DuPont, Sudarsanam Suresh Babu & Mohan Subramanian. (2019) Microstructural Evolution of Graded Transition Joints. Metallurgical and Materials Transactions A 50:5, pages 2201-2217.
Crossref
V Rajkumar, T V Arjunan & A Rajesh Kannan. (2019) Metallurgical and mechanical investigations of Inconel 625 overlay welds produced by GMAW-hardfacing process on AISI 347 pipes. Materials Research Express 6:7, pages 076534.
Crossref
Khosro Bijanrostami & Reza Vatankhah Barenji. (2017) Underwater dissimilar friction stir welding of aluminum alloys: Elucidating the grain size and hardness of the joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:4, pages 763-775.
Crossref
Amir Hossein Baghdadi, Armin Rajabi, Nor Fazilah Mohamad Selamat, Zainuddin Sajuri & Mohd Zaidi Omar. (2019) Effect of post-weld heat treatment on the mechanical behavior and dislocation density of friction stir welded Al6061. Materials Science and Engineering: A 754, pages 728-734.
Crossref
. 2019. Welding the Inconel 718 Superalloy. Welding the Inconel 718 Superalloy 269 298 .
Che Yi Lin, Hui Yum Bor, Chao Nan Wei & Chien Hung Liao. (2018) Compositional Optimization of In718 Superalloy Powder for Additive Manufacturing. Materials Science Forum 941, pages 2167-2172.
Crossref
Nikolaos D Alexopoulos, Evangelos Migklis & Dimitrios Myriounis. (2018) Experimental analysis of constant-amplitude fatigue properties in 6156 (Al-Mg-Si) sheet aluminum alloy. The Journal of Strain Analysis for Engineering Design 53:8, pages 676-686.
Crossref
D. Texier, F. Atmani, P. Bocher, F. Nadeau, J. Chen, Y. Zedan, N. Vanderesse & V. Demers. (2018) Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation. International Journal of Fatigue 116, pages 220-233.
Crossref
Kalinga Simant BAL, Jyotsna DUTTA MAJUMDAR & Asimava ROY CHOUDHURY. (2018) Elemental micro-segregation characteristic of fiber laser welded Hastelloy C-276 sheet. Transactions of Nonferrous Metals Society of China 28:11, pages 2236-2247.
Crossref
D.A. Baranov, A.A. Parkin & S.S. Zhatkin. (2018) HN45VMTYUBR Alloy: Impact of Laser Beam Welding Modes on Microstructure and Distribution of Alloying Elements in the Seam. Solid State Phenomena 284, pages 530-535.
Crossref
André Seidel, Thomas Finaske, Ariane Straubel, Horst Wendrock, Tim Maiwald, Mirko Riede, Elena Lopez, Frank Brueckner & Christoph Leyens. (2018) Additive Manufacturing of Powdery Ni-Based Superalloys Mar-M-247 and CM 247 LC in Hybrid Laser Metal Deposition. Metallurgical and Materials Transactions A 49:9, pages 3812-3830.
Crossref
Lingda Xiong, Gaoyang Mi & Chunming Wang. (2018) Microstructure and mechanical properties of laser-welded joints of Ti-22Al-25Nb/Ti-6Al-4V dissimilar titanium alloys. Journal of Laser Applications 30:3.
Crossref
Ziwei Chen, Y. Sawa & N. Hashimoto. (2018) Development of F82H composite materials with a high thermal conductivity. Nuclear Materials and Energy 16, pages 133-136.
Crossref
Y. Liu, C. Liang, A. Wei, Y. Jiang, Q. Tian, Y. Wu, Z. Xu, Y. Li, F. Guo, Q. Yang, W. Gao, H. Wang & C. Gao. (2018) Solder-free electrical Joule welding of macroscopic graphene assemblies. Materials Today Nano 3, pages 1-8.
Crossref
S. T. Auwal, S. Ramesh, F. Yusof & S. M. Manladan. (2018) A review on laser beam welding of titanium alloys. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 1071-1098.
Crossref
Taosha Liang, Lei Wang, Yang Liu & Xiu Song. (2018) Microstructure and Mechanical Properties of Laser Welded Joints of DZ125L and IN718 Nickel Base Superalloys. Metals and Materials International 24:3, pages 604-615.
Crossref
Liyong Cheng, Gaoyang Mi, Shuo Li, Chunming Wang & Xiyuan Hu. (2018) Defects diagnosis in laser brazing using near-infrared signals based on empirical mode decomposition. Optics & Laser Technology 100, pages 12-20.
Crossref
S.A. Tsirkas. (2018) Numerical simulation of the laser welding process for the prediction of temperature distribution on welded aluminium aircraft components. Optics & Laser Technology 100, pages 45-56.
Crossref
Miao Wang, Wen-xian Wang, Hong-sheng Chen & Yu-li Li. (2018) Understanding micro-diffusion bonding from the fabrication of B4C/Ni composites. International Journal of Minerals, Metallurgy, and Materials 25:3, pages 365-374.
Crossref
Jyotirmaya Kar, Sanat Kumar Roy & Gour Gopal Roy. (2017) Influence of beam oscillation in electron beam welding of Ti-6AL-4V. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 4531-4541.
Crossref
Hrishikesh Das, Mounarik Mondal, Sung-Tae Hong, Doo-Man Chun & Heung Nam Han. (2018) Joining and fabrication of metal matrix composites by friction stir welding/processing. International Journal of Precision Engineering and Manufacturing-Green Technology 5:1, pages 151-172.
Crossref
Gaurav Sharma, Lokesh Tiwari & Dheerendra Kumar Dwivedi. (2017) Impulse Pressure Assisted Diffusion Bonding of Low Carbon Steel Using Silver Interlayer. Transactions of the Indian Institute of Metals 71:1, pages 11-21.
Crossref
Chunming Wang, Lingyue Cui, Gaoyang Mi, Ping Jiang, Xinyu Shao & Youmin Rong. (2017) The influence of heat input on microstructure and mechanical properties for dissimilar welding of galvanized steel to 6061 aluminum alloy in a zero-gap lap joint configuration. Journal of Alloys and Compounds 726, pages 556-566.
Crossref
Muralimohan Cheepu, M. Ashfaq & V. Muthupandi. (2017) A New Approach for Using Interlayer and Analysis of the Friction Welding of Titanium to Stainless Steel. Transactions of the Indian Institute of Metals 70:10, pages 2591-2600.
Crossref
Siti Norhana Selamat, Nik Hisyamudin Muhd Nor, Muhammad Hanif Abdul Rashid, Mohd Fauzi Ahmad, Fariza Mohamad, Al Emran Ismail, Mohd Fahrul Hassan, Faiz Mohd Turan, Mohd Zamzuri Mohd Zain, Elmi Abu Bakar & Yokoyama Seiji. (2017) Review of CO 2 Reduction Technologies using Mineral Carbonation of Iron and Steel Making Slag in Malaysia . Journal of Physics: Conference Series 914, pages 012012.
Crossref
A. J. Banerjee, H. Roy, M. K. Biswal, A. K. Lohar, H. Chattopadhyay & Naga Hanumaiah. (2017) Investigation on Tensile Behaviour of Laser Welded Al–Mg–Sc–Zr In Situ TiB2 Reinforced Metal Matrix Composite. Transactions of the Indian Institute of Metals 70:8, pages 2071-2077.
Crossref
Xiaoqing Wang, Xibing Gong & Kevin Chou. (2016) Review on powder-bed laser additive manufacturing of Inconel 718 parts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:11, pages 1890-1903.
Crossref
M Sun, S B Behravesh, L Wu, Y Zhou & H Jahed. (2017) Fatigue behaviour of dissimilar Al 5052 and Mg AZ31 resistance spot welds with Sn-coated steel interlayer. Fatigue & Fracture of Engineering Materials & Structures 40:7, pages 1048-1058.
Crossref
Xiang Xu, Gaoyang Mi, Yuanqing Luo, Ping Jiang, Xinyu Shao & Chunming Wang. (2017) Morphologies, microstructures, and mechanical properties of samples produced using laser metal deposition with 316 L stainless steel wire. Optics and Lasers in Engineering 94, pages 1-11.
Crossref
Martin Reimann, Jannik Goebel, Thomas M. Gartner & Jorge F. dos Santos. (2017) Refilling termination hole in AA 2198–T851 by refill friction stir spot welding. Journal of Materials Processing Technology 245, pages 157-166.
Crossref
Gürel Çam & Güven İpekoğlu. (2016) Recent developments in joining of aluminum alloys. The International Journal of Advanced Manufacturing Technology 91:5-8, pages 1851-1866.
Crossref
Chun-duo Dai, Rui-na Ma, Wei Wang, Xiao-ming Cao & Yan Yu. (2017) Microstructure and properties of an Al–Ti–Cu–Si brazing alloy for SiC–metal joining. International Journal of Minerals, Metallurgy, and Materials 24:5, pages 557-565.
Crossref
Joon-Phil Choi, Gi-Hun Shin, Sangsun Yang, Dong-Yeol Yang, Jai-Sung Lee, Mathieu Brochu & Ji-Hun Yu. (2017) Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting. Powder Technology 310, pages 60-66.
Crossref
Iman Harsini, Amirpasha Peyvandi, Parviz Soroushian & Anagi M. Balachandra. (2017) Nano-engineered joining employing surface modified graphite nanomaterials. Journal of Industrial and Engineering Chemistry 48, pages 16-23.
Crossref
L. Zhou, G. H. Li, C. L. Liu, J. Wang, Y. X. Huang, J. C. Feng & F. X. Meng. (2016) Effect of rotation speed on microstructure and mechanical properties of self-reacting friction stir welded Al-Mg-Si alloy. The International Journal of Advanced Manufacturing Technology 89:9-12, pages 3509-3516.
Crossref
Wang Tao, Zhibin Yang, Chunyuan Shi & Danyang Dong. (2017) Simulating effects of welding speed on melt flow and porosity formation during double-sided laser beam welding of AA6056-T4/AA6156-T6 aluminum alloy T-joint. Journal of Alloys and Compounds 699, pages 638-647.
Crossref
Xiangdong Gao, Yingying Liu, Chongzhou Lan, Zhenlin Xiao & Xiaohui Chen. (2016) Laser-induced infrared characteristic analysis for evaluating joint deviation during austenitic stainless steel laser welding. The International Journal of Advanced Manufacturing Technology 88:5-8, pages 1877-1888.
Crossref
Xiaohong Zhan, Gaoyang Mi, Qi Zhang, Yanhong Wei & Wenmin Ou. (2016) The hourglass-like heat source model and its application for laser beam welding of 6 mm thickness 1060 steel. The International Journal of Advanced Manufacturing Technology 88:9-12, pages 2537-2546.
Crossref
Ian Polmear, David StJohn, Jian-Feng Nie & Ma Qian. 2017. Light Alloys. Light Alloys 461 514 .
O. J. Adebajo & O. A. Ojo. (2016) Enhanced Corrosion Resistance of a Transient Liquid Phase Bonded Nickel-Based Superalloy. Metallurgical and Materials Transactions A 48:1, pages 26-33.
Crossref
Ting Rong, Dongdong Gu, Qimin Shi, Sainan Cao & Mujian Xia. (2016) Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting. Surface and Coatings Technology 307, pages 418-427.
Crossref
Pei Wang, Baicheng Zhang, Cheng Cheh Tan, Srinivasan Raghavan, Yee-Fun Lim, Chen-Nan Sun, Jun Wei & Dongzhi Chi. (2016) Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting. Materials & Design 112, pages 290-299.
Crossref
Chen Zhang, Ming Gao, Ming Jiang & Xiaoyan Zeng. (2016) Effect of Weld Characteristic on Mechanical Strength of Laser-Arc Hybrid-Welded Al-Mg-Si-Mn Aluminum Alloy. Metallurgical and Materials Transactions A 47:11, pages 5438-5449.
Crossref
Wasif Safeen, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Haris Aziz & Hassan Abdalla. (2016) Predicting the tensile strength, impact toughness, and hardness of friction stir-welded AA6061-T6 using response surface methodology. The International Journal of Advanced Manufacturing Technology 87:5-8, pages 1765-1781.
Crossref
Amit Bansal, Apurbba Kumar Sharma, Shantanu Das & Pradeep Kumar. (2016) On microstructure and strength properties of microwave welded Inconel 718/ stainless steel (SS-316L). Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230:5, pages 939-948.
Crossref
Markus Ramsperger & Carolin Körner. 2016. Superalloys 2016. Superalloys 2016 341 349 .
Joydeep Pal, Dheepa Srinivasan & Eric Cheng. 2016. Superalloys 2016. Superalloys 2016 285 291 .
N A Saprykina, A A Saprykin, D A Arkhipova & I F Borovikov. (2016) Improvement of the Sintered Surface and Bulk of the Product Via Differentiating Laser Sintering (Melting) Modes. IOP Conference Series: Materials Science and Engineering 142, pages 012089.
Crossref
Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao & Damera Nageswara Rao. (2015) Optimization of fusion zone grain size, hardness, and ultimate tensile strength of pulsed current micro plasma arc welded Inconel 625 sheets using genetic algorithm. The International Journal of Advanced Manufacturing Technology 85:9-12, pages 2287-2295.
Crossref
Dai Jun, Liu Zheng, Yang Li, Wang Yang, Zhou Chiyu & Zhang Yaocheng. (2015) Research on pulsed laser welding of TiB2-enhanced aluminum matrix composites. The International Journal of Advanced Manufacturing Technology 85:1-4, pages 157-162.
Crossref
A. A. Saprykin, N. A. Saprykina & D. A. Arkhipova. (2016) The effect of layer-by-layer laser sintering on the quality of copper powder sintered surface layer. The effect of layer-by-layer laser sintering on the quality of copper powder sintered surface layer.
Wang Tao, Bing Han & Yanbin Chen. (2016) Microstructural and mechanical characterization of aluminum-lithium alloy 2060 welded by fiber laser. Journal of Laser Applications 28:2.
Crossref
Gianluca Buffa, Davide Campanella, Sergio Pellegrino & Livan Fratini. (2016) Weld quality prediction in linear friction welding of AA6082-T6 through an integrated numerical tool. Journal of Materials Processing Technology 231, pages 389-396.
Crossref
Dalong Li, Shengsun Hu, Junqi Shen, Hao Zhang & Xianzheng Bu. (2016) Microstructure and Mechanical Properties of Laser-Welded Joints of Ti-22Al-25Nb/TA15 Dissimilar Titanium Alloys. Journal of Materials Engineering and Performance 25:5, pages 1880-1888.
Crossref
Markus Ramsperger, Robert F. Singer & Carolin Körner. (2016) Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting. Metallurgical and Materials Transactions A 47:3, pages 1469-1480.
Crossref
Omar S. Salih, Hengan Ou, W. Sun & D.G. McCartney. (2015) A review of friction stir welding of aluminium matrix composites. Materials & Design 86, pages 61-71.
Crossref
Hong-Yu Chen, Lai-Ma Luo, Jun Zhang, Xiang Zan, Xiao-Yong Zhu, Guang-Nan Luo & Yu-Cheng Wu. (2015) Investigation on W/Fe diffusion bonding using Ti foil and Ti powder interlayer by SPS. Journal of Nuclear Materials 467, pages 566-571.
Crossref
R. M. Miranda, E. Assunção, R. J. C. Silva, J. P. Oliveira & L. Quintino. (2015) Fiber laser welding of NiTi to Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology 81:9-12, pages 1533-1538.
Crossref
E.O. Olakanmi, R.F. Cochrane & K.W. Dalgarno. (2015) A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties. Progress in Materials Science 74, pages 401-477.
Crossref
Hassan Ghorbani, Mahmoud Heydarzadeh Sohi, Mohammad Javad Torkamany & Babak Mehrjou. (2015) Liquid Phase Surface Treatment of Ti-6Al-4V Titanium Alloy by Pulsed Nd:YAG Laser. Journal of Materials Engineering and Performance 24:9, pages 3634-3642.
Crossref
Ranadip Acharya & Suman Das. (2015) Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control. Metallurgical and Materials Transactions A 46:9, pages 3864-3875.
Crossref
Ranadip Acharya, Rohan Bansal, Justin J. Gambone, Max A. Kaplan, Gerhard E. Fuchs, N. G. Rudawski & Suman Das. (2015) Additive Manufacturing and Characterization of René 80 Superalloy Processed Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair. Advanced Engineering Materials 17:7, pages 942-950.
Crossref
Gang Li, Jian Huang & Yixiong Wu. (2014) An investigation on microstructure and properties of dissimilar welded Inconel 625 and SUS 304 using high-power CO2 laser. The International Journal of Advanced Manufacturing Technology 76:5-8, pages 1203-1214.
Crossref
Xi Shao, Xianglong Guo, Yuanfei Han, Weijie Lu, Jining Qin & Di Zhang. (2015) Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing. Materials & Design (1980-2015) 65, pages 1001-1010.
Crossref
Qingshan Cai, Wensheng Liu, Yunzhu Ma & Haoyang Liu. (2015) Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer. International Journal of Refractory Metals and Hard Materials 48, pages 312-317.
Crossref
Ranadip Acharya, Rohan Bansal, Justin J. Gambone & Suman Das. (2014) A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I). Metallurgical and Materials Transactions B 45:6, pages 2247-2261.
Crossref
Kezhao Zhang, Ming Liu, Zhenglong Lei & Yanbin Chen. (2014) Microstructure Evolution and Tensile Properties of Laser-TIG Hybrid Welds of Ti2AlNb-Based Titanium Aluminide. Journal of Materials Engineering and Performance 23:10, pages 3778-3785.
Crossref
Ziqin Chen & Xiangdong Gao. (2014) Detection of weld pool width using infrared imaging during high-power fiber laser welding of type 304 austenitic stainless steel. The International Journal of Advanced Manufacturing Technology 74:9-12, pages 1247-1254.
Crossref
Qingbo Jia & Dongdong Gu. (2014) Selective laser melting additive manufacturing of TiC/Inconel 718 bulk-form nanocomposites: Densification, microstructure, and performance. Journal of Materials Research 29:17, pages 1960-1969.
Crossref
Xiuyang Fang & Jianxun Zhang. (2014) Effect of underfill defects on distortion and tensile properties of Ti-2Al-1.5Mn welded joint by pulsed laser beam welding. The International Journal of Advanced Manufacturing Technology 74:5-8, pages 699-705.
Crossref
Mohammad Akbari, Seyfolah Saedodin, Davood Toghraie, Reza Shoja-Razavi & Farshad Kowsari. (2014) Experimental and numerical investigation of temperature distribution and melt pool geometry during pulsed laser welding of Ti6Al4V alloy. Optics & Laser Technology 59, pages 52-59.
Crossref
M. Mazar Atabaki, M. Nikodinovski, P. Chenier, J. Ma, W. Liu & R. Kovacevic. (2014) Experimental and numerical investigations of hybrid laser arc welding of aluminum alloys in the thick T-joint configuration. Optics & Laser Technology 59, pages 68-92.
Crossref
J. C. Hou, H. J. Liu & Y. Q. Zhao. (2014) Influences of rotation speed on microstructures and mechanical properties of 6061-T6 aluminum alloy joints fabricated by self-reacting friction stir welding tool. The International Journal of Advanced Manufacturing Technology 73:5-8, pages 1073-1079.
Crossref
Gürel Çam & Selcuk Mistikoglu. (2014) Recent Developments in Friction Stir Welding of Al-alloys. Journal of Materials Engineering and Performance 23:6, pages 1936-1953.
Crossref
Güven İpekoğlu & Gürel Çam. (2014) Effects of Initial Temper Condition and Postweld Heat Treatment on the Properties of Dissimilar Friction-Stir-Welded Joints between AA7075 and AA6061 Aluminum Alloys. Metallurgical and Materials Transactions A 45:7, pages 3074-3087.
Crossref
Liming Liu, Daxin Ren & Fei Liu. (2014) A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys. Materials 7:5, pages 3735-3757.
Crossref

Displaying 200 of 249 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.