Citations (385)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (67)
Andreea Tintatu, Claudiu Badulescu, Pierre Bidaud, Philippe Le Grognec, Jérôme Adrien, Eric Maire, Hervé Bindi & Corentin Coguenanff. (2024) Understanding of water uptake mechanisms in an epoxy joint characterized by pore-type defects. The Journal of Adhesion 100:1, pages 1-33.
Read now
Read now
Brock Watson, Michael J. Worswick & Duane S. Cronin. (2023) A novel cohesive zone modelling approach to represent mixed mode loading and bond line thickness effects. The Journal of Adhesion 99:16, pages 2361-2380.
Read now
Read now
Melissa M. Gibbons, Stephen McNeela & James G. Kohl. (2023) Assessing the effect of a thickness gradient on the shear stress profile at the epoxy/silicone interface of thin coatings subjected to transverse shear loads with finite element analyses. The Journal of Adhesion 99:15, pages 2222-2237.
Read now
Read now
Jailto A.P. da Silva, Lucas F.M. da Silva, António J.M. Ferreira, Volnei Tita & Ricardo De Medeiros. (2023) Parametric investigation of bonded composite joints under Mode II using a new methodology based on design of experiments. The Journal of Adhesion 0:0, pages 1-22.
Read now
Read now
Estève Ernault, Julie Diani & Quentin Schmid. (2023) Single-lap joint creep behaviour of two soft adhesives. The Journal of Adhesion 99:8, pages 1282-1298.
Read now
Read now
Guido Di Bella, Tiziana Alderucci, Chiara Borsellino, Riccardo Miranda & Antonino Valenza. (2023) Comparative analysis between co-curing and adhesive bonding of glass-epoxy composite laminates and AA5083 aluminium sheets for Maritime application: effect of surface pattern. Journal of Adhesion Science and Technology 37:6, pages 945-960.
Read now
Read now
Yang Xue, Hiro Tanaka & Yoji Shibutani. (2023) Shape optimization of adhesives of multi-materials under multiaxial stress failure criteria. The Journal of Adhesion 99:4, pages 558-583.
Read now
Read now
Thulasidhas Dhilipkumar & Murugan Rajesh. (2023) Influence of manufacturing process and GFRP pin loading on shear and dynamic behaviour of composite joints. The Journal of Adhesion 99:4, pages 538-557.
Read now
Read now
Nidhal Naat, Yasmina Boutar, Sami Naïmi, Salah Mezlini & Lucas Filipe Martins Da Silva. (2023) Effect of surface texture on the mechanical performance of bonded joints: a review. The Journal of Adhesion 99:2, pages 166-258.
Read now
Read now
Michal K. Budzik, Markus Wolfahrt, Paulo Reis, Marcin Kozłowski, José Sena-Cruz, Loucas Papadakis, Mohamed Nasr Saleh, Klara V. Machalicka, Sofia Teixeira de Freitas & Anastasios P. Vassilopoulos. (2022) Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview. The Journal of Adhesion 98:14, pages 2133-2209.
Read now
Read now
Konstantinos Tserpes, Alberto Barroso-Caro, Paolo Andrea Carraro, Vinicius Carrillo Beber, Ioannis Floros, Wojciech Gamon, Marcin Kozłowski, Fabio Santandrea, Moslem Shahverdi, Davor Skejić, Chiara Bedon & Vlatka Rajčić. (2022) A review on failure theories and simulation models for adhesive joints. The Journal of Adhesion 98:12, pages 1855-1915.
Read now
Read now
Morten Voß & Till Vallée. (2022) Effects of Curie particle induced accelerated curing on thermo-mechanical performance of 2K structural adhesives – Part II: Lap shear properties. The Journal of Adhesion 98:9, pages 1167-1217.
Read now
Read now
Hamidreza Borghei, Bashir Behjat & Mojtaba Yazdani. (2022) Effect of adhesive and nanocomposite layers on lap shear strength of layup bonded joints. Journal of Adhesion Science and Technology 36:7, pages 731-747.
Read now
Read now
Youdong Xing, Siyi Yang, Shiqing Lu, Pengfei Zhang, Yukun An & John Zhai. (2022) Effect of bonding parameters on compression mechanical properties of bi-directional corrugated honeycomb aluminum. The Journal of Adhesion 98:4, pages 348-366.
Read now
Read now
Boling He & Yingguang Pan. (2022) Failure mechanism of single lap, adhesively bonded composite-titanium joints subjected to solid projectile impact. Journal of Adhesion Science and Technology 36:4, pages 370-391.
Read now
Read now
Sunil Kumar Gupta. (2022) Effect of adhesive thickness and adherend material with a surface roughness on lap shear strength of joints in tensile and compressive loading. Advances in Materials and Processing Technologies 8:1, pages 1023-1043.
Read now
Read now
M.A. Martínez, S. López de Armentia & J. Abenojar. (2021) Influence of sample dimensions on single lap joints: effect of interactions between parameters. The Journal of Adhesion 97:14, pages 1358-1369.
Read now
Read now
Wang Guo, Peijian Chen, Hao Liu, Yugui Yang, Guangjian Peng & Zhitong Chen. (2021) On the strength and interfacial properties of square wave joints with defects and mismatches. The Journal of Adhesion 97:13, pages 1211-1233.
Read now
Read now
Ana Passos, Ricardo de Aguiar, Hector Costa, Eduardo Sampaio & Silvio de Barros. (2021) Adherence of geopolymer and pultruded composite substrates: influence of adhesive type and surface treatment. Journal of Adhesion Science and Technology 35:16, pages 1723-1733.
Read now
Read now
Zhiwen Qin, Ke Yang, Jihui Wang, Lixin Zhang, Ji Huang, Haijun Peng & Jianzhong Xu. (2021) The effects of geometrical dimensions on the failure of composite-to-composite adhesively bonded joints. The Journal of Adhesion 97:11, pages 1024-1051.
Read now
Read now
Lorena M. Fernández-Cañadas, Ines Ivañez, Sonia Sanchez-Saez & Ever J. Barbero. (2021) Effect of adhesive thickness and overlap on the behavior of composite single-lap joints. Mechanics of Advanced Materials and Structures 28:11, pages 1111-1120.
Read now
Read now
Clayton Neff, Edwin Elston, Amanda Schrand & Nathan Crane. (2021) Adhesion testing of printed inks while varying the surface treatment of polymer substrates. The Journal of Adhesion 97:5, pages 399-416.
Read now
Read now
M.Z. Sadeghi, J. Zimmermann, A. Gabener & K.U. Schröder. (2021) On the bondline thickness effect in mixed-mode fracture characterisation of an epoxy adhesive. The Journal of Adhesion 97:3, pages 282-304.
Read now
Read now
Alpesh H. Makwana & A. A. Shaikh. (2021) The role of patch hybridization on tensile response of cracked panel repaired with hybrid composite patch: experimental and numerical investigation. The Journal of Adhesion 97:1, pages 53-87.
Read now
Read now
Mohammad Shishesaz & Mohammad Hosseini. (2020) Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview. The Journal of Adhesion 96:12, pages 1053-1121.
Read now
Read now
Dharun Vadugappatty Srinivasan, Atin Aggarwal, I. Sridhar & Charles Ng. (2020) Effect of residual epoxy on single lap joints performance. The Journal of Adhesion 96:10, pages 883-901.
Read now
Read now
Brock Watson, Chi-Hsiang Liao, Michael J. Worswick & Duane Steven Cronin. (2020) Mode I traction-separation measured using rigid double cantilever beam applied to structural adhesive. The Journal of Adhesion 96:8, pages 717-737.
Read now
Read now
I.J. Sánchez-Arce, L.D.C. Ramalho, R.D.S.G. Campilho & J. Belinha. (2020) Evaluation of an elastic meshless formulation to adhesive joints’ strength prediction against established methods. Journal of Adhesion Science and Technology 34:11, pages 1206-1232.
Read now
Read now
Xiaochun Wu, Kai He, Zhihong Gong, Zhijie Liu & Jun Jiang. (2020) The shear strength of composite secondary bonded single-lap joints with different fabrication methods. Journal of Adhesion Science and Technology 34:9, pages 936-948.
Read now
Read now
M. R. Gheibi, M. H. Shojaeefard & H. Saeidi Googarchin. (2019) Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints. The Journal of Adhesion 95:10, pages 943-970.
Read now
Read now
Minoo Dokht Shokrian, Karim Shelesh-Nezhad & Reza Najjar. (2019) Effect of CNT dispersion methods on the strength and fracture mechanism of interface in epoxy adhesive/Al joints. Journal of Adhesion Science and Technology 33:13, pages 1394-1409.
Read now
Read now
O. Völkerink, J. Kosmann, M. J. Schollerer, D. Holzhüter & C. Hühne. (2019) Strength prediction of adhesively bonded single lap joints with the eXtended Finite Element Method. The Journal of Adhesion 95:5-7, pages 474-494.
Read now
Read now
Xinkuo Ji, Gesheng Xiao, Tao Jin & Xuefeng Shu. (2019) Shear properties of isotropic conductive adhesive joints under different loading rates. The Journal of Adhesion 95:3, pages 204-217.
Read now
Read now
Ali Nemati Giv, Majid R. Ayatollahi, S. Hengameh Ghaffari & Lucas F.M. da Silva. (2018) Effect of reinforcements at different scales on mechanical properties of epoxy adhesives and adhesive joints: a review. The Journal of Adhesion 94:13, pages 1082-1121.
Read now
Read now
J. J. M. Machado, E. A. S. Marques & Lucas F. M. da Silva. (2018) Adhesives and adhesive joints under impact loadings: An overview. The Journal of Adhesion 94:6, pages 421-452.
Read now
Read now
Dong Quan, Philip Cardiff, Neal Murphy & Alojz Ivankovic. (2018) Damage behaviour of nano-modified epoxy adhesives subject to high stress constraint. The Journal of Adhesion 94:5, pages 387-405.
Read now
Read now
Özkan Öz & Halil Özer. (2017) An experimental investigation on the failure loads of the mono and bi-adhesive joints. Journal of Adhesion Science and Technology 31:19-20, pages 2251-2270.
Read now
Read now
A. Akhavan-Safar, M. R. Ayatollahi, S. Rastegar & L. F. M. da Silva. (2017) Impact of geometry on the critical values of the stress intensity factor of adhesively bonded joints. Journal of Adhesion Science and Technology 31:18, pages 2071-2087.
Read now
Read now
Marco Cocconcelli & Andrea Spaggiari. (2017) Mounting of accelerometers with structural adhesives: Experimental characterization of the dynamic response. The Journal of Adhesion 93:8, pages 585-598.
Read now
Read now
Sugiman Sugiman & Hilton Ahmad. (2017) Comparison of cohesive zone and continuum damage approach in predicting the static failure of adhesively bonded single lap joints. Journal of Adhesion Science and Technology 31:5, pages 552-570.
Read now
Read now
Yasmina Boutar, Sami Naïmi, Salah Mezlini, Lucas F. M. da Silva, Mohamed Hamdaoui & Moez Ben Sik Ali. (2016) Effect of adhesive thickness and surface roughness on the shear strength of aluminium one-component polyurethane adhesive single-lap joints for automotive applications. Journal of Adhesion Science and Technology 30:17, pages 1913-1929.
Read now
Read now
Quantian Luo & Liyong Tong. (2016) Solutions for Clamped Adhesively Bonded Single Lap Joint With Movement of Support End and Its Application to a Carbon Nanotube Junction in Tension. The Journal of Adhesion 92:5, pages 349-379.
Read now
Read now
Haibo Luo, Ying Yan, Taotao Zhang & Zudian Liang. (2016) Progressive failure and experimental study of adhesively bonded composite single-lap joints subjected to axial tensile loads. Journal of Adhesion Science and Technology 30:8, pages 894-914.
Read now
Read now
Jianfeng Li, Ying Yan, Zudian Liang & Taotao Zhang. (2016) Experimental and Numerical Study of Adhesively Bonded CFRP Scarf-Lap Joints Subjected to Tensile Loads. The Journal of Adhesion 92:1, pages 1-17.
Read now
Read now
Yu Zhang, Menglan Duan, Yi Wang & Gui Chu. (2015) Analytical study of the strength of adhesive joints of riser pipes. Ships and Offshore Structures 10:5, pages 545-553.
Read now
Read now
Jin-Ho Hong, Min-Gu Han & Seung-Hwan Chang. (2015) The Effects of Environmental Temperature and Additional Pressure on the Bonding Characteristics of Co-cured Carbon/Epoxy-Aluminum Single Lap Joints. The Journal of Adhesion 91:3, pages 197-213.
Read now
Read now
M. D. Banea, L. F. M. da Silva & R. D. S. G. Campilho. (2015) The Effect of Adhesive Thickness on the Mechanical Behavior of a Structural Polyurethane Adhesive. The Journal of Adhesion 91:5, pages 331-346.
Read now
Read now
Shiuh-Chuan Her & Shou-Jen Liu. (2014) Load transfer in adhesive double-sided patch joints. Journal of Adhesion Science and Technology 28:14-15, pages 1517-1529.
Read now
Read now
Sen Yang, Wei Xu, Lihong Liang, Tzuchiang Wang & Yueguang Wei. (2014) An experimental study on the dependence of the strength of adhesively bonded joints with thickness and mechanical properties of the adhesives. Journal of Adhesion Science and Technology 28:11, pages 1055-1071.
Read now
Read now
Daniel Bürger, CalvinD. Rans & Rinze Benedictus. (2014) Influence of Fabric Carrier on the Fatigue Disbond Behavior of Metal-to-Metal Bonded Interfaces. The Journal of Adhesion 90:5-6, pages 482-495.
Read now
Read now
R.J.C. Carbas, L.F.M. da Silva, E.A.S. Marques & A.M. Lopes. (2013) Effect of post-cure on the glass transition temperature and mechanical properties of epoxy adhesives. Journal of Adhesion Science and Technology 27:23, pages 2542-2557.
Read now
Read now
A. Spaggiari, D. Castagnetti & E. Dragoni. (2013) Mixed-Mode Strength of Thin Adhesive Films: Experimental Characterization Through a Tubular Specimen with Reduced Edge Effect. The Journal of Adhesion 89:8, pages 660-675.
Read now
Read now
Wei Xu & Yueguang Wei. (2013) Assessments for impact of adhesive properties: modeling strength of metallic single lap joints. Journal of Adhesion Science and Technology 27:1, pages 9-29.
Read now
Read now
M.D. Banea, L.F. M. da Silva & R.D. S. G. Campilho. (2012) Mode II Fracture Toughness of Adhesively Bonded Joints as a Function of Temperature: Experimental and Numerical Study. The Journal of Adhesion 88:4-6, pages 534-551.
Read now
Read now
A. Spaggiari, D. Castagnetti & E. Dragoni. (2012) Experimental Tests on Tubular Bonded Butt Specimens: Effect of Relief Grooves on Tensile Strength of the Adhesive. The Journal of Adhesion 88:4-6, pages 499-512.
Read now
Read now
R. Hunter, N. Ibacache, J. Möller, R. Betancourt, T. Mora, E. Diez & B. Pavez. (2012) Influence of Roughness on the Mechanical Adhesion of Single Lap Joints. The Journal of Adhesion 88:4-6, pages 376-390.
Read now
Read now
D. Castagnetti, A. Spaggiari & E. Dragoni. (2011) Effect of Bondline Thickness on the Static Strength of Structural Adhesives Under Nearly-Homogeneous Shear Stresses. The Journal of Adhesion 87:7-8, pages 780-803.
Read now
Read now
X. Zhao,
R. D. Adams &
L. F. M. da Silva. (2011) Single Lap Joints with Rounded Adherend Corners: Stress and Strain Analysis. Journal of Adhesion Science and Technology 25:8, pages 819-836.
Read now
Read now
LucasF. M. da Silva, F. A. C. R. G. de Magalhães, F. J. P. Chaves & M. F. S. F. de Moura. (2010) Mode II Fracture Toughness of a Brittle and a Ductile Adhesive as a Function of the Adhesive Thickness. The Journal of Adhesion 86:9, pages 891-905.
Read now
Read now
MarianaD. Banea & LucasF. M. da Silva. (2009) Mechanical Characterization of Flexible Adhesives. The Journal of Adhesion 85:4-5, pages 261-285.
Read now
Read now
E. A. S. Marques & LucasF. M. da Silva. (2008) Joint Strength Optimization of Adhesively Bonded Patches. The Journal of Adhesion 84:11, pages 915-934.
Read now
Read now
A. Adnan & C. T. Sun. (2008) Effect of Adhesive Thickness on Joint Strength: A Molecular Dynamics Perspective. The Journal of Adhesion 84:5, pages 401-420.
Read now
Read now
LucasF. M. da Silva,
G.W. Critchlow &
M. A. V. Figueiredo. (2008) Parametric Study of Adhesively Bonded Single Lap Joints by the Taguchi Method. Journal of Adhesion Science and Technology 22:13, pages 1477-1494.
Read now
Read now
Nao Terasaki, Yuki Fujio, Yoshitaro Sakata, Keiji Houjou, Kazumasa Shimamoto, Haruhisa Akiyama, Kiyoshi Yase, Shin Horiuchi, Sven Hartwig, Julian Steinberg, Christian Gundlach & Rio Hirakawa. Effect of laser pre-treatment on adhesive joint performance and evaluation of interfacial strain distribution using mechanoluminescence. The Journal of Adhesion 0:0, pages 1-18.
Read now
Read now
Charline van Innis & Thomas Pardoen. Thickness-dependent selection of adhesive joints. The Journal of Adhesion 0:0, pages 1-54.
Read now
Read now
Silke Golob, Jens Holtmannspötter, Michael Johlitz, Elisa Arikan, Antje Struck & Alexander Lion. Accelerating environmental ageing effects of adhesively bonded aluminium joints by using smaller bonding areas. The Journal of Adhesion 0:0, pages 1-19.
Read now
Read now
Chao Kang, Ming Ji, Yu Sekiguchi, Masanobu Naito & Chiaki Sato. A high-throughput technique to evaluate the probability distribution of strength of adhesively bonded joints after moisture absorption. The Journal of Adhesion 0:0, pages 1-23.
Read now
Read now
Articles from other publishers (318)
Hao Wu, Jinli Qin, Xiangdong Hua, Zhaolu Wang, Zejun Zhang & Jianming Zhang. (2024) Self-assembly behavior and adhesive performance of imidazolium cation grafted cellulose nanocrystals in confined space. Carbohydrate Polymers 336, pages 122127.
Crossref
Crossref
F.Castro Sousa, P. Zamani, A. Akhavan-Safar & L.F.M. da Silva. (2024) A comprehensive review of the S-N fatigue behaviour of adhesive joints. Journal of Advanced Joining Processes 9, pages 100178.
Crossref
Crossref
Yang Wei, Xihong Jin, Quantian Luo, Qing Li & Guangyong Sun. (2024) Adhesively bonded joints – A review on design, manufacturing, experiments, modeling and challenges. Composites Part B: Engineering 276, pages 111225.
Crossref
Crossref
Vasco DC Pires, Ricardo JC Carbas, Eduardo AS Marques & Lucas FM da Silva. (2024) Delamination prevention of composite joints with asymmetric carbon-fiber reinforced plastic adherends. Journal of Composite Materials 58:8, pages 1015-1029.
Crossref
Crossref
Andrea Corrado & Wilma Polini. (2024) A Unique Numerical Model to Evaluate the Influence of Adherends' Misalignment on Adhesive Joint Strength. Manufacturing Technology.
Crossref
Crossref
Ting Lin, Yuchen Wu, Elizabeth Santos, Xiaoyun Chen, Frederic Gubbels, Nick Shephard, Carol Mohler, Dongchan Ahn, Tzu-Chi Kuo & Zhan Chen. (2024) Elucidating the Changes in Molecular Structure at the Buried Interface of RTV Silicone Elastomers during Curing. Langmuir 40:11, pages 5968-5977.
Crossref
Crossref
Robert Setter & Katrin Wudy. (2024) Investigation of the bonding behavior between thermosets and thermoplastic elastomers in multi-material additive manufacturing. Polymer Testing 132, pages 108366.
Crossref
Crossref
Ege Gülçiçek, Ege Anıl Diler & Onur Ertugrul. (2024) Synergistic effect of surface treatment and adhesive type on bonding performance of thin Al6061 joints for automotive applications. International Journal of Adhesion and Adhesives 130, pages 103641.
Crossref
Crossref
Ahmet Çalık, Salih Akpınar & Murat Demiral. (2024) The effects of using intermittent metal part reinforcement and countersink on the strength of adhesively bonded joints. International Journal of Adhesion and Adhesives 130, pages 103613.
Crossref
Crossref
T.S. Methfessel, C. El Yaakoubi-Mesbah & W. Becker. (2024) Failure analysis of crack-prone joints with Finite Fracture Mechanics using an advanced modeling approach for the adhesive layer. International Journal of Adhesion and Adhesives 130, pages 103608.
Crossref
Crossref
Machar Devine, Ankur Bajpai, Conchúr M. Ó Brádaigh & Dipa Ray. (2024) ‘Resin welding’: A novel route to joining acrylic composite components at room temperature. Composites Part B: Engineering 272, pages 111212.
Crossref
Crossref
Pedro Morais, Alireza Akhavan-Safar, Ricardo J. C. Carbas, Eduardo A. S. Marques, Bala Karunamurthy & Lucas F. M. da Silva. (2024) Mode I Fatigue and Fracture Assessment of Polyimide–Epoxy and Silicon–Epoxy Interfaces in Chip-Package Components. Polymers 16:4, pages 463.
Crossref
Crossref
Maruri Takamura, Minori Isozaki, Shinichi Takeda, Yutaka Oya & Jun Koyanagi. (2024) Evaluation of True Bonding Strength for Adhesive Bonded Carbon Fiber-Reinforced Plastics. Materials 17:2, pages 394.
Crossref
Crossref
Caio Adler, Pedro Morais, Alireza Akhavan-Safar, Ricardo J. C. Carbas, Eduardo A. S. Marques, Bala Karunamurthy & Lucas F. M. da Silva. (2024) Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach. Materials 17:2, pages 289.
Crossref
Crossref
Koichi Yokozeki, Kazumasa Hisazumi, Till Vallée, Tobias Evers, Thomas Ummenhofer, Jakob Boretzki & Matthias Albiez. (2024) Hybrid joints consisting of pre-tensioned bolts and a bonded connection, Part II: Large-scale experiments. International Journal of Adhesion and Adhesives 128, pages 103523.
Crossref
Crossref
Nao Terasaki. 2024. Interfacial Phenomena in Adhesion and Adhesive Bonding. Interfacial Phenomena in Adhesion and Adhesive Bonding
209
290
.
Daniel A. Souto-Silvar, Ana Álvarez-García, Ana Díaz-Díaz, Francisco J. Rodríguez-Dopico & Jorge López-Beceiro. (2023) The effect of marine ageing on the mechanical properties of a structural adhesive. Mechanics of Time-Dependent Materials.
Crossref
Crossref
Mohammed Yusuf A. Yadwad, Vishwas G.N. Rajesh Mathivanan. 2023. Manufacturing and Processing of Advanced Materials. Manufacturing and Processing of Advanced Materials
183
197
.
Yu-Zhen Mao, Chin-Ting Ho, Chao-Hsuan Kuo & Chun-Wei Liu. (2023) Defect analysis of cementing lenses and parameter optimization based on a convolutional neural network algorithm. Optical Engineering 62:12.
Crossref
Crossref
Xumin Zhang, Jiacheng Zhao, Shuoran Tong, Yuhao Huang, Dong Zha, Lan Luo & Yong Liu. (2023) Evolution of mechanical and corrosion properties of TiN/TiO2 nanocomposite multi-stage coating on AZ31 magnesium alloy using atomic layer deposition and in-situ oxidation. Thin Solid Films 787, pages 140145.
Crossref
Crossref
Wenlei Zhang, Yang Gao, Yifan Zhou, Hou Wu, Zhigang Suo & Tongqing Lu. (2023) Strength and toughness of tissue adhesives depend on thickness. Giant 16, pages 100200.
Crossref
Crossref
Yaqi Zhang, Ruquan Zhang & Yongzhen Tao. (2023) Conductive, water-retaining and knittable hydrogel fiber from xanthan gum and aniline tetramer modified-polysaccharide for strain and pressure sensors. Carbohydrate Polymers 321, pages 121300.
Crossref
Crossref
Tobias Evers, Frank Mohr, Till Vallée & Koichi Yokozeki. (2023) Präzise Messung von Klebstoffschichtdicken in Hybridverbindungen. adhäsion KLEBEN & DICHTEN 67:12, pages 36-41.
Crossref
Crossref
Oktay Çavuşoğlu, Işıl Bolova, Hakan Aydın, Ali Kara, Berna Güzeldağ & Haluk Dinkçi. (2023) Effect of bonding conditions on mechanical performance of DP600 steels at different ambient temperatures. Materials Testing 65:11, pages 1686-1695.
Crossref
Crossref
Yang Wei, Quantian Luo, Qing Li & Guangyong Sun. (2023) On adhesively bonded joints with a mixed failure mode—An experimental and numerical study. Thin-Walled Structures 192, pages 110987.
Crossref
Crossref
Jonathan Freund, Isabel Lützenkirchen, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang Wu, Thomas Tröster & Jan Haubrich. (2023) Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints. Journal of Composites Science 7:10, pages 427.
Crossref
Crossref
Yao Qiao, Robert J. Seffens, Ethan K. Nickerson, Timothy J. Roosendaal, Daniel R. Merkel, Yongsoon Shin, Jose L. Ramos, Seunghyun Ko, Avik Samanta, Madhusudhan R. Pallaka, Angel Ortiz & Kevin L. Simmons. (2023) A study of adhesive bonding in metal–metal, metal–CFRP, and CFRP–CFRP material combinations under shear deformation: Fracture morphologies and damage mechanisms. International Journal of Adhesion and Adhesives 127, pages 103511.
Crossref
Crossref
Hang Xu, Xiaorui Zhang, Yating Yu, Yang Yu, Zhou Yang, Xingsong Zhu & Ling Weng. (2023) Enhancement of mechanical properties of epoxy resin matrix adhesives by high-performance fillers. Journal of Polymer Research 30:10.
Crossref
Crossref
Hossein Malekinejad, Ricardo J. C. Carbas, Alireza Akhavan-Safar, Eduardo A. S. Marques, Fernando Castro Sousa & Lucas F. M. da Silva. (2023) Enhancing Fatigue Life and Strength of Adhesively Bonded Composite Joints: A Comprehensive Review. Materials 16:19, pages 6468.
Crossref
Crossref
Radim Kupčák, Jan Zouhar, Jindřich Viliš, Lukáš Gregor & Denisa Hrušecká. (2023) Precision and Dimensional Stability of Bonded Joints of Carbon-Fibre-Reinforced Polymers Parts. Applied Sciences 13:18, pages 10413.
Crossref
Crossref
Anurag Kamal, Anoop Kumar Shukla & Vijay M. Shinde. (2023) High-strength C/SiC joints prepared using a novel Ni-Si-CNTs-based filler. Journal of the European Ceramic Society.
Crossref
Crossref
Mohammadreza Gheibi, Mohammad Hassan Shojaeefard, Hamed Saeidi Googarchin & Ahmadreza Zaeri. (2023) A generalized- Park-Paulinho-Roesler cohesive zone model to simulate moderate ductile adhesive joints. International Journal of Adhesion and Adhesives 126, pages 103489.
Crossref
Crossref
Kailiang Chen, Yidi Wu, Weiguang Han, Binglin Liu, Wang Wenjie, Huihong Liu & Yongbing Li. (2023) Influence of adhesive thickness and defect on mechanical property of adhesive bonded joint of flexible polymer substrate and cable for solar panel application. International Journal of Adhesion and Adhesives 126, pages 103485.
Crossref
Crossref
Y.M. Haddou, M. Salem, A. Amiri, R. Amiri & S. Abid. (2023) Numerical analysis and optimization of adhesively-bonded single lap joints by adherend notching using a full factorial design of experiment. International Journal of Adhesion and Adhesives 126, pages 103482.
Crossref
Crossref
Erhan Cetin & Chamberlain Tagni Fossi. (2023) Experimental investigation on mechanical strength of adhesively bonded 3D-printed joints under hygrothermal conditions using Taguchi method. International Journal of Adhesion and Adhesives 126, pages 103472.
Crossref
Crossref
Özkan Öz & Fatih Huzeyfe Öztürk. (2023) An investigation on failure behaviour of bonded polylactic acid adherends produced by 3D printing process: experimental and numerical approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:8.
Crossref
Crossref
Laxmikant S. Kane & M.R. Bhat. (2023) Evaluation of Influence of Surface Roughness Orientation in CFRP Lap Joints using AE and DIC. Materials Evaluation 81:6, pages 43-51.
Crossref
Crossref
Xiaoyu Cui, Hongjian Wang, Lin Ye & Kunkun Fu. (2023) Effect of boundary dimension on energy absorption behaviour of shear thickening fluids under impact. Smart Materials and Structures 32:5, pages 055005.
Crossref
Crossref
Marco Lamberti, Aurelien Maurel-Pantel & Frederic Lebon. (2023) Experimental characterization and modelling of adhesive bonded joints under static and non-monotonic fracture loading in the mode II regime. International Journal of Adhesion and Adhesives 124, pages 103394.
Crossref
Crossref
Pei He, Weikang Feng & Marko Pavlovic. (2023) Influence of steel yielding and resin toughness on debonding of wrapped composite joints. Composite Structures 312, pages 116862.
Crossref
Crossref
Shouming Shang, Pengfei Hou, Qiuhua Li & Wenhua Zhang. (2023) Three-dimensional exact solutions of double-coated structure with arbitrary thickness under normal point load. Applied Mathematical Modelling 117, pages 762-785.
Crossref
Crossref
Yuki Ogawa, Kimiyoshi Naito, Keisuke Harada & Hiroyuki Oguma. (2023) Proposal of Evaluation Method for Crack Propagation Behaviors of Second-Generation Acrylic Adhesives under Mode I Static Loading. Polymers 15:8, pages 1878.
Crossref
Crossref
Pankaj R. Jaiswal, R. Iyer Kumar, Thibault Juwet, Geert Luyckx, Cedric Verhaeghe & Wim De Waele. (2023) Experimental deformation analysis of an adhesively bonded multi‐material joint for marine applications. Strain 59:2.
Crossref
Crossref
Patrick Schmidt, Tabea J. Koch, Christoph Berthold, Frieder Lauxmann & Klaus G. Nickel. (2022) The evolution of strength, elasticity and rupture behaviour of birch tar made with ‘double‐pot’ techniques during tar cooking. Archaeometry 65:2, pages 409-422.
Crossref
Crossref
Yi Liu, Roman B. Goncharov & Valery N. Zuzov. (2023) Study of the effects of deformation rate and adhesive layer thickness under impact loading on parameters of adhesive joints in a vehicle. Izvestiya MGTU MAMI 16:3, pages 251-263.
Crossref
Crossref
Raffaele Ciardiello, Carlo Boursier Niutta & Luca Goglio. (2023) Adhesive Thickness and Ageing Effects on the Mechanical Behaviour of Similar and Dissimilar Single Lap Joints Used in the Automotive Industry. Processes 11:2, pages 433.
Crossref
Crossref
M.A. Khan, R. Tipireddy, B. Dattaguru & S. Kumar. (2023) Stochastic modeling of functionally graded double lap adhesive joints. Mechanics of Materials 177, pages 104553.
Crossref
Crossref
Farin Ramezani, Beatriz D. Simões, Ricardo J. C. Carbas, Eduardo A. S. Marques & Lucas F. M. da Silva. (2023) Developments in Laminate Modification of Adhesively Bonded Composite Joints. Materials 16:2, pages 568.
Crossref
Crossref
Sena SEVİNÇ & Melis TAŞKIN. (2023) Numerical Analysis of Single Lap Pretension Bolted Joint. International Journal of Engineering and Applied Sciences 14:3, pages 77-90.
Crossref
Crossref
Amirhossein Darbandi & Amin Mirzaei. (2023) Quasi-static cyclic loading assessment of GFRP single-lap adhesive joints reinforced with z-pins. Thin-Walled Structures 182, pages 110247.
Crossref
Crossref
Gui-hua Xie, Yi You, Zi-an Tao & Shi-quan Li. (2023) Experimental and theoretical study on mechanical behaviors of CFRP–steel interface. Thin-Walled Structures 182, pages 110208.
Crossref
Crossref
Wang Guo, Peijian Chen, Hao Liu, Guangjian Peng, Jiaming Zhu & Yufei Wu. (2023) Interfacial behavior of thin film bonded to plastically graded substrate under tensile loading. European Journal of Mechanics - A/Solids 97, pages 104818.
Crossref
Crossref
Sofia Teixeira de Freitas & Michal K. Budzik. 2023. Advances in Structural Adhesive Bonding. Advances in Structural Adhesive Bonding
615
641
.
Kshitish A. Patankar, Tom Kalantar, Simon Cook, Edoardo Nicoli, Brad Tuft & Matthew Crimmins. 2023. Advances in Structural Adhesive Bonding. Advances in Structural Adhesive Bonding
751
775
.
John-Alan Pascoe. 2023. Comprehensive Structural Integrity. Comprehensive Structural Integrity
2
23
.
Berkant Dindar, İnan Ağır & Hasan Çallıoğlu. (2022) Experimental investigation of single-lap bolted and bolted/bonded (hybrid) joints of polymeric plates. Open Chemistry 20:1, pages 1612-1621.
Crossref
Crossref
Jaemin Jo, So-Yeon Jeong, Junhyeok Lee, Chulhwan Park & Bonwook Koo. (2022) Green and Sustainable Hot Melt Adhesive (HMA) Based on Polyhydroxyalkanoate (PHA) and Silanized Cellulose Nanofibers (SCNFs). Polymers 14:23, pages 5284.
Crossref
Crossref
Henrique F.M de Queiroz & Mariana D. Banea. (2022) Methods to increase the mechanical performance of composite adhesive joints: An overview with focus on joints with natural fibre composite adherends. Journal of Composite Materials 56:26, pages 3993-4010.
Crossref
Crossref
Avishek Chanda, Nam Kyeun Kim & Debes Bhattacharyya. (2022) Effects of adhesive systems on the mechanical and fire-reaction properties of wood veneer laminates. Composites Science and Technology 230, pages 109331.
Crossref
Crossref
Ben H. Skopic, Sean R. Koebley & Hannes C. Schniepp. (2022) Self-strengthening tape junctions inspired by recluse spider webs. Materials Horizons 9:10, pages 2581-2591.
Crossref
Crossref
Jianjun Pan, Wei Hou, Liangying Wang, Zisong Zou & Fan Xiao. (2022) Design and experimental study of a fiber Bragg grating strain sensor with enhanced sensitivity. Applied Optics 61:28, pages 8172.
Crossref
Crossref
Xuhai Xiong, Yingfan Deng, Jian Wei, Rong Ren, Jing Wang, Xu Cui, Fang Qu & Guiyang Li. (2022) The effect of inclusions embedded in the adhesive on the stress distribution and strength of single-lap adhesive joints: analytical and numerical analysis. International Journal of Adhesion and Adhesives 118, pages 103235.
Crossref
Crossref
Ali Sadeghi, Rasoul Mahshid, Mohammad Heidari-Rarani & Larry Lessard. (2022) Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints. International Journal of Adhesion and Adhesives 118, pages 103232.
Crossref
Crossref
Myong-Ho Kim, Jun-Hyok Ri & Hyon-Sik Hong. (2022) A 3-D numerical modeling for prediction of mixed failure characteristics in composite single lap joints with hybrid adhesive layer. International Journal of Adhesion and Adhesives 118, pages 103223.
Crossref
Crossref
Özkan Öz & Fatih Huzeyfe Öztürk. (2022) Effect of carbon filler–modified epoxy adhesive on failure behavior of bonded single-lap joint: an experimental study combined with digital image correlation method. Welding in the World 66:10, pages 2143-2156.
Crossref
Crossref
Simin Zhang, Wenxiong Shi, Biao Yu & Xun Wang. (2022) Versatile Inorganic Subnanometer Nanowire Adhesive. Journal of the American Chemical Society 144:36, pages 16389-16394.
Crossref
Crossref
T. Alderucci, C. Borsellino & G. Di Bella. (2022) Effect of surface pattern on strength of structural lightweight bonded joints for marine applications. International Journal of Adhesion and Adhesives 117, pages 103005.
Crossref
Crossref
Hossein Abdollahi, Ali Samadi, Farzaneh Amiri, Vahid Mousapour-Khaneshan, Payam Zarrintaj & Majid Kavanlouei. (2022) Kinetics of thermal degradation, adhesion and dynamic-mechanical properties of flexible polyamine-epoxy systems. Journal of Polymer Research 29:9.
Crossref
Crossref
Vincent Pang, Zachary J. Thompson, Guy D. Joly, Frank S. Bates & Lorraine F. Francis. (2022) Adhesion of Silica and Block Copolymer Toughened Epoxy Composites. ACS Applied Polymer Materials 4:8, pages 6169-6178.
Crossref
Crossref
Faidra Oikonomopoulou & Telesilla Bristogianni. (2022) Adhesive solutions for cast glass assemblies: ground rules emerging from built case studies on adhesive selection and experimental validation. Glass Structures & Engineering 7:2, pages 293-317.
Crossref
Crossref
Rahul Iyer Kumar, Pankaj Jaiswal & Wim De Waele. (2022) Fatigue damage and life evaluation of thick bi‐material double strap joints for use in marine applications. Fatigue & Fracture of Engineering Materials & Structures 45:7, pages 2099-2111.
Crossref
Crossref
C. Belei, R. Pommer & S.T. Amancio-Filho. (2022) Optimization of additive manufacturing for the production of short carbon fiber-reinforced polyamide/Ti-6Al-4V hybrid parts. Materials & Design 219, pages 110776.
Crossref
Crossref
Jun-Hyok Ri, Myong-Ho Kim & Hyon-Sik Hong. (2022) A mixed mode elasto-plastic damage model for prediction of failure in single lap joint. International Journal of Adhesion and Adhesives 116, pages 103134.
Crossref
Crossref
Karthik Ramaswamy, Ronan M. O'Higgins & Conor T. McCarthy. (2022) Impact damage tolerance and residual performance of novel interlocked-hybrid structural joints. Composites Part B: Engineering 241, pages 109996.
Crossref
Crossref
P.F. Liu & J.W. Liu. (2022) Finite element analysis of competitive damage mechanisms of composite scarf adhesive joints by considering thickness effect. Theoretical and Applied Fracture Mechanics 119, pages 103347.
Crossref
Crossref
F. Delzendehrooy, A. Akhavan-Safar, A.Q. Barbosa, R.J.C. Carbas, E.A.S. Marques & L.F.M. da Silva. (2022) Investigation of the mechanical performance of hybrid bolted-bonded joints subjected to different ageing conditions: Effect of geometrical parameters and bolt size. Journal of Advanced Joining Processes 5, pages 100098.
Crossref
Crossref
Hao Long, Yueguang Wei, Yanwei Liu & Jingchuan Li. (2022) Trans-scale characterization of the thickness-dependent interfacial strength of adhesively bonded cylindrical scarf joints. International Journal of Adhesion and Adhesives 115, pages 103133.
Crossref
Crossref
F. Delzendehrooy, A. Akhavan-Safar, A.Q. Barbosa, R. Beygi, D. Cardoso, R.J.C. Carbas, E.A.S. Marques & L.F.M. da Silva. (2022) A comprehensive review on structural joining techniques in the marine industry. Composite Structures 289, pages 115490.
Crossref
Crossref
Hasan NajiMehr, Mahmoud Shariati, Pedram Zamani, Lucas F. M. da Silva & Danial Ghahremani Moghadam. (2021) Investigating on the influence of multi‐walled carbon nanotube and graphene nanoplatelet additives on residual strength of bonded joints subjected to partial fatigue loading. Journal of Applied Polymer Science 139:18.
Crossref
Crossref
A. Akhavan-Safar, F. Ramezani, F. Delzendehrooy, M.R. Ayatollahi & L.F.M. da Silva. (2022) A review on bi-adhesive joints: Benefits and challenges. International Journal of Adhesion and Adhesives 114, pages 103098.
Crossref
Crossref
Mojtaba Karimi, Amir Nourani & Sobhan Honarvar. (2022) Geometry Influence on Fracture Behavior of Lap-Shear Solder Joints. IEEE Transactions on Components, Packaging and Manufacturing Technology 12:1, pages 80-88.
Crossref
Crossref
Aun Naa Sung. Quality requirement and process parameters of optical bonding. Quality requirement and process parameters of optical bonding.
Wilma Polini & Andrea Corrado. (2022) Effects of adherends’ misalignment on the 3-point flexural strength of single lap bonded joints. Procedia CIRP 114, pages 165-170.
Crossref
Crossref
T.S. Sahana, Vadivuchezhian Kaliveeran & Subrahmanya Kundapura. (2022) Mechanical characterization of adhesive layer using Double strap joint specimens. Materials Today: Proceedings 66, pages 509-513.
Crossref
Crossref
M.N. Vinay. (2022) Optimization of process parameters of aluminium 2024 – T3 joints bonded using modified epoxy resin. Materials Today: Proceedings 54, pages 325-329.
Crossref
Crossref
S.CH. Djebbar, N. Kaddouri, K. Madani, M. Eladjrami, A. Houari & M. Mokhtari. (2022) Effect of the use of a hybrid material on stress reduction in an adhesive used for a single lap joint; bending loading effect. Materials Today: Proceedings 49, pages 1056-1065.
Crossref
Crossref
Claudio Russo, Francesc Bustamante, Xavier Fernández-Francos & Silvia De la Flor. (2022) Adhesive properties of thiol-acrylate-epoxy composites obtained by dual-curing procedures. International Journal of Adhesion and Adhesives 112, pages 102959.
Crossref
Crossref
Akash Pisharody & D.E. Smith. (2022) An experimental and numerical investigation into the effects of bond line thickness variations on the strength of composite bonded joints. Composite Structures 279, pages 114789.
Crossref
Crossref
Mohamed Mustafa Abdul Kader & Govindarasu Jeevi. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers
353
365
.
Patrick Schmidt, Matthias A. Blessing, Tabea J. Koch & Klaus G. Nickel. (2021) On the performance of birch tar made with different techniques. Heritage Science 9:1.
Crossref
Crossref
Mohammad Reza Khosravani, Payam Soltani & Tamara Reinicke. (2021) Fracture and structural performance of adhesively bonded 3D-printed PETG single lap joints under different printing parameters. Theoretical and Applied Fracture Mechanics 116, pages 103087.
Crossref
Crossref
Morgan Dundu & Lance T. Chikore. (2021) Plastic response of laterally restrained adhesive-bonded compound steel beams. Journal of Constructional Steel Research 187, pages 107007.
Crossref
Crossref
N. Carrere, A. Doitrand, E. Martin & D. Leguillon. (2021) Theoretical study based on 2D assumptions of the influence of small pores on crack initiation in adhesively bonded joints. International Journal of Adhesion and Adhesives 111, pages 102979.
Crossref
Crossref
Leonardo Dalseno Antonino, Guilherme Elias Saltarelli Garcia, Camila de Oliveira Viani, Júlia Rocha Gouveia, Suel Eric Vidotti & Demetrio Jackson dos Santos. (2021) Effects of core–shell and reactive liquid rubbers incorporation on practical adhesion and fracture energy of epoxy adhesives. Iranian Polymer Journal 30:12, pages 1329-1338.
Crossref
Crossref
Amal Narayanan, Ali Dhinojwala & Abraham Joy. (2021) Design principles for creating synthetic underwater adhesives. Chemical Society Reviews 50:23, pages 13321-13345.
Crossref
Crossref
Yiding Liu, Craig Carnegie, Helen Ascroft, Wenhao Li, Xiao Han, Hua Guo & Darren J. Hughes. (2021) Investigation of Adhesive Joining Strategies for the Application of a Multi-Material Light Rail Vehicle. Materials 14:22, pages 6991.
Crossref
Crossref
Dawei Zhang & Ying Huang. (2021) The bonding performances of carbon nanotube (CNT)-reinforced epoxy adhesively bonded joints on steel substrates. Progress in Organic Coatings 159, pages 106407.
Crossref
Crossref
J.-B. Charpentier, C. Perderiset, J.L. Bouvard, F. Georgi, D. Pino-Muñoz & F. Rasselet. (2021) On the influence of eccentricity on Thick Adherend Shear Tests. International Journal of Adhesion and Adhesives 110, pages 102910.
Crossref
Crossref
L. R. R. Silva, E. A. S. Marques & Lucas F. M. da Silva. (2021) Polymer joining techniques state of the art review. Welding in the World 65:10, pages 2023-2045.
Crossref
Crossref
S. Bremm, S. Dölling, W. Becker, L. Blum, Ro. Peters, J. Malzbender & D. Stolten. (2021) A methodological contribution to failure prediction of glass ceramics sealings in high-temperature solid oxide fuel cell stacks. Journal of Power Sources 507, pages 230301.
Crossref
Crossref
Myong-Ho Kim, Un-Il Ri, Hyon-Sik Hong & Yong-Chol Kim. (2021) Comparative study of failure models for prediction of mixed-mode failure characteristics in composite adhesively bonded joint with brittle/Quai-brittle adhesive using finite element analysis. International Journal of Adhesion and Adhesives 109, pages 102911.
Crossref
Crossref
Mohammad Reza Khosravani, Payam Soltani, Kerstin Weinberg & Tamara Reinicke. (2021) Structural integrity of adhesively bonded 3D-printed joints. Polymer Testing 100, pages 107262.
Crossref
Crossref
Nabard Habibi & Shadi Ramezani. (2021) Experimental study of nanocomposite hybrid adhesive-rivet joints. Archives of Civil and Mechanical Engineering 21:3.
Crossref
Crossref
S. Dasilva, A. Jimenez-Suarez, E. Rodríguez & S. G. Prolongo. (2021) Influence of Manufacturing Process in Structural Health Monitoring and Mechanical Behaviour of CNT Reinforced CFRP and Ti6Al4V Multi-Material Joints. Polymers 13:15, pages 2488.
Crossref
Crossref
Chien-Wei Chu, Yucheng Zhang, Kakeru Obayashi, Ken Kojio & Atsushi Takahara. (2021) Single-Lap Joints Bonded with Epoxy Nanocomposite Adhesives: Effect of Organoclay Reinforcement on Adhesion and Fatigue Behaviors. ACS Applied Polymer Materials 3:7, pages 3428-3437.
Crossref
Crossref
Seonghyun Kim, Seung Hui Lee, Subi Choi, Suk-kyun Ahn, Gi-Deog Jang, Jong S. Park & Dong Gi Seong. (2021) Overcoming the trade-off relationship between mechanical and adhesive properties of acrylic pressure sensitive adhesive thin-film by reinforcing polydopamine-coated silica nanoparticles. Polymer 228, pages 123937.
Crossref
Crossref
S. Dölling, S. Bremm, A. Kohlstetter, J. Felger & W. Becker. (2021) Predicting thermally induced edge-crack initiation using finite fracture mechanics. Engineering Fracture Mechanics 252, pages 107808.
Crossref
Crossref
R.J.C. Carbas, M.A. Dantas, E.A.S. Marques & L.F.M. da Silva. (2021) Effect of the adhesive thickness on butt adhesive joints under torsional loads. Journal of Advanced Joining Processes 3, pages 100061.
Crossref
Crossref
A.C. Passos, M.M. Arouche, R.A.A. Aguiar, H.R.M. Costa, S. de Barros & E.M. Sampaio. (2021) Adhesion of epoxy and polyurethane adhesives in pultruded composite material. Journal of Advanced Joining Processes 3, pages 100045.
Crossref
Crossref
C. Sun, P. Jia, C. Chen, A. Moradi, J. Zhou, M. Al Teneiji, W.J. Cantwell & Z.W. Guan. (2021) The effect of carbon fibre stitching on the tensile behaviour of secondary bonded single- and double-lap composite joints. Composite Structures 265, pages 113774.
Crossref
Crossref
Witold Rządkowski, Jan Tracz, Adam Cisowski, Kamil Gardyjas, Hubert Groen, Marek Palka & Michał Kowalik. (2021) Evaluation of Bonding Gap Control Methods for an Epoxy Adhesive Joint of Carbon Fiber Tubes and Aluminum Alloy Inserts. Materials 14:8, pages 1977.
Crossref
Crossref
Dawei Zhang & Ying Huang. (2021) Influence of surface roughness and bondline thickness on the bonding performance of epoxy adhesive joints on mild steel substrates. Progress in Organic Coatings 153, pages 106135.
Crossref
Crossref
Eduardo Pires Bonhin, Sarah David-Müzel, Manoel Cléber de Sampaio Alves, Edson Cocchieri Botelho & Marcos Valério Ribeiro. (2020) A review of mechanical drilling on fiber metal laminates. Journal of Composite Materials 55:6, pages 843-869.
Crossref
Crossref
H N Firmansyah, IW Brillian & DA Bangga. (2021) Adhesive Bonding Analysis of Single Lap Joint Composite E-Glass Fiber WR 600. IOP Conference Series: Earth and Environmental Science 700:1, pages 012005.
Crossref
Crossref
Lei Guo, Jianhua Liu, Huanxiong Xia, Xiayu Li, Xiumin Zhang & Hongfan Yang. (2021) Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints. Polymer Testing 94, pages 107063.
Crossref
Crossref
Yunpeng Liu, Li Han, Huan Zhao & Xianping Liu. (2021) Numerical modelling and experimental investigation of the Riv-Bonding process. Journal of Materials Processing Technology 288, pages 116914.
Crossref
Crossref
Pedram Zamani, Abdolrahman Jaamialahmadi & Lucas F.M. da Silva. (2021) The influence of GNP and nano-silica additives on fatigue life and crack initiation phase of Al-GFRP bonded lap joints subjected to four-point bending. Composites Part B: Engineering 207, pages 108589.
Crossref
Crossref
Atsushi Takano, Chao Li & Ryuta Kitamura. (2021) Effect of Lap Length and Stiffness of Peel-Stop Fasteners in Single Lap Joints. Applied Sciences 11:3, pages 1086.
Crossref
Crossref
Kin On Ho, Man Yin Leung, Yiu Yung Pang, King Cho Wong, Ping Him Ng & Sen Yang. (2020)
In
Situ
Studies of Stress Environment in Amorphous Solids Using Negatively Charged Nitrogen Vacancy (NV
–
) Centers in Nanodiamond
. ACS Applied Polymer Materials 3:1, pages 162-170.
Crossref
Crossref
Dan Wang, Jianfu Zhang & Zhongmin Su. (2021) Fabrication of metal/polymer layer structure composites by demulsification-induced fast solidification. Journal of Physics: Conference Series 1759:1, pages 012010.
Crossref
Crossref
M. N. Vinay. Optimization of adhesive bonding parameters of aluminium 6082 joints. Optimization of adhesive bonding parameters of aluminium 6082 joints.
Sergey Smirnov, Dmitry Konovalov, Irina Veretennikova & Aleksander Pestov. (2021) Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State. Procedia Structural Integrity 33, pages 259-264.
Crossref
Crossref
I.J. Sánchez-Arce, L.D.C. Ramalho, R.D.S.G. Campilho & J. Belinha. (2021) Material non-linearity in the numerical analysis of SLJ bonded with ductile adhesives: A meshless approach. International Journal of Adhesion and Adhesives 104, pages 102716.
Crossref
Crossref
Sukhmanjot Kaur, Michael C. Wilson & Ali Dhinojwala. 2021. Macromolecular Engineering. Macromolecular Engineering
257
276
.
Ricardo J.C. Carbas, Catarina Borges, Eduardo A.S. Marques, Alireza Akhavan-Safar & Lucas F.M. da Silva. 2021. Advanced Joining Processes. Advanced Joining Processes
271
317
.
Alireza Akhavan-Safar, Eduardo A.S. Marques, Ricardo J.C. Carbas & Lucas F.M. da Silva. 2021. Adhesive Bonding. Adhesive Bonding
159
192
.
Mariana D. Banea. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites
324
333
.
I. J. Sánchez-Arce, L. D. C. Ramalho, R. D. S. G. Campilho & J. Belinha. 2021. Industrial Applications of Adhesives. Industrial Applications of Adhesives
57
77
.
Haibo Luo, Xin Li, Yiding Li, Xiaohui He, Jinxin Ye & Zhaojie Li. (2020) Damage properties of pre-embedded connection of carbon fiber wound composite tubes. Materials Today Communications 25, pages 101525.
Crossref
Crossref
Fan Liu, Tiantian Li, Xihang Jiang, Zian Jia, Zhiping Xu & Lifeng Wang. (2020) The effect of material mixing on interfacial stiffness and strength of multi-material additive manufacturing. Additive Manufacturing 36, pages 101502.
Crossref
Crossref
D.V. Srinivasan, V. Ravichandran & S. Idapalapati. (2020) Failure analysis of GFRP single lap joints tailored with a combination of tough epoxy and hyperelastic adhesives. Composites Part B: Engineering 200, pages 108255.
Crossref
Crossref
Yohanes Yohanes, Agus Sigit Pramono & Adib B. Hudayya. (2020) Non-Monotonous Effect of Adhesive Thickness on The Dynamic Stiffness of Adhesive Butt Joint. Key Engineering Materials 867, pages 188-195.
Crossref
Crossref
Yecheng Wang, Xuxu Yang, Guodong Nian & Zhigang Suo. (2020) Strength and toughness of adhesion of soft materials measured in lap shear. Journal of the Mechanics and Physics of Solids 143, pages 103988.
Crossref
Crossref
Displaying 200 of 385 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list