Advanced search
Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 70, 2016 - Issue 6
Submit an article Journal homepage
331
Views
16
CrossRef citations to date
0
Altmetric
Original Articles

Effects of deposition height and width on film cooling

Jin WangSchool of Energy and Environmental Engineering, Hebei University of Technology, Tianjin, China
,
Pei CuiSchool of Energy and Environmental Engineering, Hebei University of Technology, Tianjin, China
,
Bengt SundénDepartment of Energy Sciences, Division of Heat Transfer, Lund University, Lund, SwedenCorrespondence[email protected]
&
Milan VujanovićDepartment of Energy, Power Engineering and Environment, University of Zagreb, Zagreb, Croatia
Pages 673-687 | Received 10 Jan 2016, Accepted 20 Apr 2016, Published online: 18 Aug 2016

Citations (16)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (6)

Mojtaba Kazemi Kelishami & Soheil Porkhial. (2023) Numerical investigation of forward, lateral, and backward injection of the coolant fluid in various flow characteristics to find the optimum film cooling effectiveness. Numerical Heat Transfer, Part A: Applications 0:0, pages 1-20.
Read now
Jin Wang, Ke Tian, Hengxuan Zhu, Min Zeng & Bengt Sundén. (2020) Numerical investigation of particle deposition in film-cooled blade leading edge. Numerical Heat Transfer, Part A: Applications 77:6, pages 579-598.
Read now
Wei Du, Lei Luo, Songtao Wang, Jian Liu & Bengt Sunden. (2019) Heat transfer and flow structure in a rotating duct with detached pin fins. Numerical Heat Transfer, Part A: Applications 75:4, pages 217-241.
Read now
Rui Zhu, Terrence W. Simon & Gongnan Xie. (2018) Influence of secondary hole injection angle on enhancement of film cooling effectiveness with horn-shaped or cylindrical primary holes. Numerical Heat Transfer, Part A: Applications 74:5, pages 1207-1227.
Read now
Kun Du, Zhigang Li, Jun Li & Bengt Sunden. (2018) Influence of the pressure side injection slot on the cooling performance of endwall surface. Numerical Heat Transfer, Part A: Applications 73:8, pages 517-534.
Read now
Jin Wang, QianQian Li, Bengt Sundén, Jakov Baleta & Milan Vujanović. (2017) Two-phase flow simulation of mist film cooling with deposition for various boundary conditions. Numerical Heat Transfer, Part A: Applications 71:9, pages 895-909.
Read now

Articles from other publishers (10)

Gi Mun Kim, Jae Su Kwak & Jung Uk Choi. (2022) An experimental investigation on the effects of a slot exit protrusion on film cooling effectiveness. International Journal of Thermal Sciences 172, pages 107306.
Crossref
Jin Wang, Zhanming Zhao, Gongnan Xie, Hrvoje Mikulčić, Milan Vujanović & Bengt Sundén. (2021) Effects of Particle Size and Mainstream Inlet Angle on Deposition in a Turbine Cascade. Journal of Energy Resources Technology 143:12.
Crossref
Jishnu Handique, Kuldeep Singh & Dushyant Singh. (2021) Effects of soot deposition and slot erosion on the mist film-cooling of a flat plate in the presence of upstream ramp. Thermal Science and Engineering Progress 22, pages 100784.
Crossref
Jin Wang, Zhanming Zhao, Liang Tian, Xiaodong Ren & Bengt Sundén. (2021) Effects of hole configuration on film cooling effectiveness and particle deposition on curved surfaces in gas turbines. Applied Thermal Engineering 190, pages 116861.
Crossref
Jishnu Handique. (2021) Numerical study of mist film cooling on a flat plate with various numbers of deposition. Journal of Mechanical Science and Technology 35:1, pages 351-360.
Crossref
Y. Lian, Z. Xu, H. Pei, C. Liang, Y. Zhang, Z. Wen & Z. Yue. (2019) Influence of Film-Cooling Hole Arrangement on Mechanical Properties of Cooled Turbine Blade Based on the Crystal Plastic Theory. Journal of Mechanics 35:6, pages 809-828.
Crossref
Kun Du, Jun Li & Bengt Sunden. (2018) Effects of the cooling configurations layout near the first-stage vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface. International Journal of Heat and Mass Transfer 123, pages 1021-1034.
Crossref
Jin Wang, Qianqian Li, Bengt Sundén, Ting Ma & Pei Cui. (2017) Effect of an upstream bulge configuration on film cooling with and without mist injection. Journal of Environmental Management 203, pages 1072-1079.
Crossref
Jin Wang, Yiwei Liu, Bengt Sundén, Ran Yang, Jakov Baleta & Milan Vujanović. (2017) Analysis of slab heating characteristics in a reheating furnace. Energy Conversion and Management 149, pages 928-936.
Crossref
Zhe Wang, Bengt Sundén & Yanzhong Li. (2017) A novel optimization framework for designing multi-stream compact heat exchangers and associated network. Applied Thermal Engineering 116, pages 110-125.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.