2,945
Views
118
CrossRef citations to date
0
Altmetric
Original Articles

Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (18)

John Kechagias & Dimitrios Chaidas. (2023) Fused filament fabrication parameter adjustments for sustainable 3D printing. Materials and Manufacturing Processes 38:8, pages 933-940.
Read now
Sayed Kaes Maruf Hossain, Azul Toledo Vega, Delia Valles-Rosales, Young Ho Park, Sarada Kuravi & Hansuk Sohn. (2023) Particulate suspension: a review of studies characterizing particulates and volatile organic compounds emissions during additive manufacturing processes. Particulate Science and Technology 41:3, pages 350-360.
Read now
Teresa Vera, F. Villanueva, L. Wimmerová & E. I. Tolis. (2022) An overview of methodologies for the determination of volatile organic compounds in indoor air. Applied Spectroscopy Reviews 57:8, pages 625-674.
Read now
Antti Väisänen, Lauri Alonen, Sampsa Ylönen & Marko Hyttinen. (2022) Volatile organic compound and particulate emissions from the production and use of thermoplastic biocomposite 3D printing filaments. Journal of Occupational and Environmental Hygiene 19:6, pages 381-393.
Read now
A.B. Stefaniak, S Du Preez & JL Du Plessis. (2021) Additive Manufacturing for Occupational Hygiene: A Comprehensive Review of Processes, Emissions, & Exposures. Journal of Toxicology and Environmental Health, Part B 24:5, pages 173-222.
Read now
Ruikang He, Taewon Han, Daniel Bachman, Dominick J Carluccio, Rudolph Jaeger, Jie Zhang, Sanjeevi Thirumurugesan, Clinton Andrews & Gediminas Mainelis. (2021) Evaluation of two low-cost PM monitors under different laboratory and indoor conditions. Aerosol Science and Technology 55:3, pages 316-331.
Read now
Rachel E. Zisook, Brooke D. Simmons, Mark Vater, Angela Perez, Ellen P. Donovan, Dennis J. Paustenbach & William D. Cyrs. (2020) Emissions associated with operations of four different additive manufacturing or 3D printing technologies. Journal of Occupational and Environmental Hygiene 17:10, pages 464-479.
Read now
Felix L Chan, Chun-Yip Hon, Susan M Tarlo, Nikhil Rajaram & Ronald House. (2020) Emissions and health risks from the use of 3D printers in an occupational setting. Journal of Toxicology and Environmental Health, Part A 83:7, pages 279-287.
Read now
Jinghai Yi, Matthew G. Duling, Lauren N. Bowers, Alycia K. Knepp, Ryan F. LeBouf, Timothy R. Nurkiewicz, Anand Ranpara, Todd Luxton, Stephen B. Martin$suffix/text()$suffix/text(), Dru A. Burns, Derek M. Peloquin, Eric J. Baumann, M. Abbas Virji & Aleksandr B. Stefaniak. (2019) Particle and organic vapor emissions from children’s 3-D pen and 3-D printer toys. Inhalation Toxicology 31:13-14, pages 432-445.
Read now
Mauro Petretta, Giovanna Desando, Brunella Grigolo & Livia Roseti. (2019) 3D printing of musculoskeletal tissues: impact on safety and health at work. Journal of Toxicology and Environmental Health, Part A 82:16, pages 891-912.
Read now
A. B. Stefaniak, L. N. Bowers, A. K. Knepp, T. P. Luxton, D. M. Peloquin, E. J. Baumann, J. E. Ham, J. R. Wells, A. R. Johnson, R. F. LeBouf, F.-C. Su, S. B. Martin & M. A. Virji. (2019) Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers. Journal of Occupational and Environmental Hygiene 16:8, pages 519-531.
Read now
Antti J. K. Väisänen, Marko Hyttinen, Sampsa Ylönen & Lauri Alonen. (2019) Occupational exposure to gaseous and particulate contaminants originating from additive manufacturing of liquid, powdered, and filament plastic materials and related post-processes. Journal of Occupational and Environmental Hygiene 16:3, pages 258-271.
Read now
Qian Zhang, Girish Sharma, Jenny P. S. Wong, Aika Y. Davis, Marilyn S. Black, Pratim Biswas & Rodney J. Weber. (2018) Investigating particle emissions and aerosol dynamics from a consumer fused deposition modeling 3D printer with a lognormal moment aerosol model. Aerosol Science and Technology 52:10, pages 1099-1111.
Read now
Qian Zhang, Jenny P. S. Wong, Aika Y. Davis, Marilyn S. Black & Rodney J. Weber. (2017) Characterization of particle emissions from consumer fused deposition modeling 3D printers. Aerosol Science and Technology 51:11, pages 1275-1286.
Read now
Aleksandr B. Stefaniak, Ryan F. LeBouf, Jinghai Yi, Jason Ham, Timothy Nurkewicz, Diane E. Schwegler-Berry, Bean T. Chen, J. Raymond Wells, Matthew G. Duling, Robert B. Lawrence, Stephen B. Martin$suffix/text()$suffix/text(), Alyson R. Johnson & M. Abbas Virji. (2017) Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer. Journal of Occupational and Environmental Hygiene 14:7, pages 540-550.
Read now
Evan L. Floyd, Jun Wang & James L. Regens. (2017) Fume emissions from a low-cost 3-D printer with various filaments. Journal of Occupational and Environmental Hygiene 14:7, pages 523-533.
Read now
Szymon Wojtyła, Piotr Klama & Tomasz Baran. (2017) Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon. Journal of Occupational and Environmental Hygiene 14:6, pages D80-D85.
Read now
Jinghai Yi, Ryan F. LeBouf, Matthew G. Duling, Timothy Nurkiewicz, Bean T. Chen, Diane Schwegler-Berry, M. Abbas Virji & Aleksandr B. Stefaniak. (2016) Emission of particulate matter from a desktop three-dimensional (3D) printer. Journal of Toxicology and Environmental Health, Part A 79:11, pages 453-465.
Read now

Articles from other publishers (100)

Chun-Yip Hon, Nikhil Rajaram & Susan M Tarlo. 2024. Encyclopedia of Toxicology. Encyclopedia of Toxicology 949 955 .
Qian Zhang & Marilyn S. Black. (2023) Exposure hazards of particles and volatile organic compounds emitted from material extrusion 3D printing: Consolidation of chamber study data. Environment International 182, pages 108316.
Crossref
Yaone Rapitsenyane, Patience Erick, Oanthata Jester Sealetsa & Richie Moalosi. 2023. Intelligent Manufacturing Management Systems. Intelligent Manufacturing Management Systems 319 348 .
Anneli Kangas, Kirsi Kukko, Tomi Kanerva, Arto Säämänen, Jan Sher Akmal, Jouni Partanen & Anna-Kaisa Viitanen. (2023) Workplace Exposure Measurements of Emission from Industrial 3D Printing. Annals of Work Exposures and Health 67:5, pages 596-608.
Crossref
Giorgio Felici, Joanna Izabela Lachowicz, Simone Milia, Emanuele Cannizzaro, Luigi Cirrincione, Terenzio Congiu, Mariusz Jaremko, Marcello Campagna & Luigi Isaia Lecca. (2023) A pilot study of occupational exposure to ultrafine particles during 3D printing in research laboratories. Frontiers in Public Health 11.
Crossref
Xin Qian, Arezou Anvari, Eric M.V. Hoek & Jeffrey R. McCutcheon. (2023) Advancements in conventional and 3D printed feed spacers in membrane modules. Desalination 556, pages 116518.
Crossref
Ilona Pavlovska, Lāsma Akūlova, Anna Lece, Žanna Martinsone, Linda Paegle, Aneka Kļaviņa, Klinta Luīze Sprūdža & Inese Mārtiņsone. 2023. Advances in 3D Printing. Advances in 3D Printing.
Chi-Long Tang, Stefan Seeger & Mathias Röllig. (2023) Improving the comparability of FFF-3D printing emission data by adjustment of the set extruder temperature. Atmospheric Environment: X 18, pages 100217.
Crossref
Qian Zhang, Rodney J. Weber, Todd P. Luxton, Derek M. Peloquin, Eric J. Baumann & Marilyn S. Black. (2023) Metal compositions of particle emissions from material extrusion 3D printing: Emission sources and indoor exposure modeling. Science of The Total Environment 860, pages 160512.
Crossref
Heike Romanowski, Frank S. Bierkandt, Andreas Luch & Peter Laux. (2023) Summary and derived Risk Assessment of 3D printing emission studies. Atmospheric Environment 294, pages 119501.
Crossref
Derek M. Peloquin, Logan N. Rand, Eric J. Baumann, Ali Gitipour, Joanna Matheson & Todd P. Luxton. (2022) Variability in the inorganic composition of colored acrylonitrile–butadiene–styrene and polylactic acid filaments used in 3D printing. SN Applied Sciences 5:1.
Crossref
Hermann FrommeHermann Fromme. 2023. Indoor Air Quality. Indoor Air Quality 93 156 .
Hermann FrommeHermann Fromme. 2023. Indoor Air Quality. Indoor Air Quality 37 91 .
Seymur Hasanov, Ankit Gupta, Frank Alifui-Segbaya & Ismail Fidan. 2023. Springer Handbook of Additive Manufacturing. Springer Handbook of Additive Manufacturing 547 557 .
H Gleissner, G Castrillon-Oberndorfer & St Gehrlich. (2021) Introduction of 3D Printing in a German Municipal Hospital—Practice Guide for CMF Surgery. Craniomaxillofacial Trauma & Reconstruction 15:4, pages 369-378.
Crossref
Sylvia Van Der Walt, Sonette Du Preez & Johannes L Du Plessis. (2022) Particle emissions and respiratory exposure to hazardous chemical substances associated with binder jetting additive manufacturing utilizing poly methyl methacrylate. Hygiene and Environmental Health Advances 4, pages 100033.
Crossref
W. Cary Hill, Daniel W. Seitz, Matthew S. Hull, Mark L. Ballentine & Alan J. Kennedy. (2022) Additives influence 3D printer emission profiles: Implications for working safely with polymer filament composites . Indoor Air 32:10.
Crossref
Mariana T. Farcas, Walter McKinney, Jayme Coyle, Marlene Orandle, W. Kyle Mandler, Aleksandr B. Stefaniak, Lauren Bowers, Lori Battelli, Diana Richardson, Mary A. Hammer, Sherri A. Friend, Samantha Service, Michael Kashon, Chaolong Qi, Duane R. Hammond, Treye A. Thomas, Joanna Matheson & Yong Qian. (2022) Evaluation of Pulmonary Effects of 3-D Printer Emissions From Acrylonitrile Butadiene Styrene Using an Air-Liquid Interface Model of Primary Normal Human-Derived Bronchial Epithelial Cells. International Journal of Toxicology 41:4, pages 312-328.
Crossref
Jie Zhang, Da-Ren Chen & Sheng-Chieh Chen. (2022) A review of emission characteristics and control strategies for particles emitted from 3D fused deposition modeling (FDM) printing. Building and Environment 221, pages 109348.
Crossref
Jie Zhang, Da-Ren Chen & Sheng-Chieh Chen. (2022) Sampling and characterization of particle emission from the 3D FDM printing. Journal of Building Engineering 52, pages 104476.
Crossref
Tanay Kuclourya, Roberto Monroy, Enrique Cuan-Urquizo, Armando Roman-Flores & Rafiq Ahmad. (2022) Scientometric analysis and critical review of fused deposition modeling in the plastic recycling context. Cleaner Waste Systems 2, pages 100008.
Crossref
Qian Zhang, Aika Y. Davis & Marilyn S. Black. (2022) Emissions and Chemical Exposure Potentials from Stereolithography Vat Polymerization 3D Printing and Post-processing Units. ACS Chemical Health & Safety 29:2, pages 184-191.
Crossref
Boowook Kim, Jae Hoon Shin, Hoi Pin Kim, Mi Seong Jo, Hee Sang Kim, Jong Sung Lee, Hong Ku Lee, Hyuk Cheol Kwon, Sung Gu Han, Noeul Kang, Mary Gulumian, Dhimiter Bello & Il Je Yu. (2022) On-Site Deployment of an Air-Liquid-Interphase Device to Assess Health Hazard Potency of Airborne Workplace Contaminants: The Case of 3-D Printers. Frontiers in Toxicology 4.
Crossref
Panagiotis Karayannis, Stratos Saliakas, Ioannis Kokkinopoulos, Spyridon Damilos, Elias P. Koumoulos, Eleni Gkartzou, Julio Gomez & Constantinos Charitidis. (2022) Facilitating Safe FFF 3D Printing: A Prototype Material Case Study. Sustainability 14:5, pages 3046.
Crossref
Chi‐Long Tang & Stefan Seeger. (2022) Systematic ranking of filaments regarding their particulate emissions during fused filament fabrication 3D printing by means of a proposed standard test method. Indoor Air 32:3.
Crossref
Getachew Tedla, Annie M. Jarabek, Peter Byrley, William Boyes & Kim Rogers. (2022) Human exposure to metals in consumer-focused fused filament fabrication (FFF)/ 3D printing processes. Science of The Total Environment 814, pages 152622.
Crossref
Xin Qian, Mayur Ostwal, Ayse Asatekin, Geoffrey M. Geise, Zachary P. Smith, William A. Phillip, Ryan P. Lively & Jeffrey R. McCutcheon. (2022) A critical review and commentary on recent progress of additive manufacturing and its impact on membrane technology. Journal of Membrane Science 645, pages 120041.
Crossref
Boowook Kim, Jae Hoo Shin, Hoi Pin Kim, Mi Seong Jo, Hee Sang Kim, Jong Sung Lee, Hong Ku Lee, Hyuk Cheol Kwon, Sung Gu Han, Noeul Kang, Mary Gulumian, Dhimiter Bello & Il Je Yu. (2022) Assessment and Mitigation of Exposure of 3-D Printer Emissions. Frontiers in Toxicology 3.
Crossref
Gunilla Runström Eden, Håkan Tinnerberg, Lars Rosell, Rickie Möller, Ann-Charlotte Almstrand & Anna Bredberg. (2022) Exploring Methods for Surveillance of Occupational Exposure from Additive Manufacturing in Four Different Industrial Facilities. Annals of Work Exposures and Health 66:2, pages 163-177.
Crossref
Anna Karwasz, Filip Osiński & Krzysztof Łukaszewski. (2022) Pollutants Emitted from 3D Printers onto Operators. Sustainability 14:3, pages 1400.
Crossref
Remigiusz Knitter, Andrzej Blazejewski & Tomasz Królikowski. (2022) Modeling and simulation of Vibro-isolator Rapid Prototyping using additive manufacturing. Procedia Computer Science 207, pages 1293-1302.
Crossref
Dipti Vaya, Babita Kaushik & Praveen K. Surolia. (2022) Recent advances in graphitic carbon nitride semiconductor: Structure, synthesis and applications. Materials Science in Semiconductor Processing 137, pages 106181.
Crossref
Rong-Fu Kuo, Yu-Sheng Lin, Tai-Hua Yang & Anh-Thu Nguyen. 2022. 3D Printing in Oral Health Science. 3D Printing in Oral Health Science 269 291 .
Anna Karwasz & Filip Osiński. 2022. Advances in Manufacturing III. Advances in Manufacturing III 216 226 .
Anna Dudkowiak, Ewa Dostatni, Izabela Rojek & Dariusz Mikołajewski. 2022. Advances in Manufacturing III. Advances in Manufacturing III 76 89 .
Izabela Rojek, Marek Macko, Jakub Kopowski & Dariusz Mikołajewski. 2022. Innovations in Mechanical Engineering. Innovations in Mechanical Engineering 82 91 .
Bruce W. Jo & Christina Soyoung Song. (2021) Thermoplastics and Photopolymer Desktop 3D Printing System Selection Criteria Based on Technical Specifications and Performances for Instructional Applications. Technologies 9:4, pages 91.
Crossref
Elżbieta Dobrzyńska, Dorota Kondej, Joanna Kowalska & Małgorzata Szewczyńska. (2021) State of the art in additive manufacturing and its possible chemical and particle hazards—review. Indoor Air 31:6, pages 1733-1758.
Crossref
Antti Juho Kalevi Väisänen, Lauri Alonen, Sampsa Ylönen, Isa Lyijynen & Marko Hyttinen. (2021) The impact of thermal reprocessing of 3D printable polymers on their mechanical performance and airborne pollutant profiles. Journal of Polymer Research 28:11.
Crossref
Phillip M. Potter, Souhail R. Al-Abed, Farhana Hasan & Slawomir M. Lomnicki. (2021) Influence of polymer additives on gas-phase emissions from 3D printer filaments. Chemosphere 279, pages 130543.
Crossref
Ke Min, Yong Li, Dingyi Wang, Bo Chen, Ming Ma, Ligang Hu, Qian Liu & Guibin Jiang. (2021) 3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk. Environmental Science & Technology Letters 8:8, pages 616-625.
Crossref
Rajae Jemghili, Abdelmajid Ait Taleb & Mansouri Khalifa. (2021) A bibliometric indicators analysis of additive manufacturing research trends from 2010 to 2020. Rapid Prototyping Journal 27:7, pages 1432-1454.
Crossref
Aleksandr B. Stefaniak, Lauren N. Bowers, Stephen B. MartinJr.Jr., Duane R. Hammond, Jason E. Ham, J. R. Wells, Alyson R. Fortner, Alycia K. Knepp, Sonette du Preez, Jack R. Pretty, Jennifer L. Roberts, Johan L. du Plessis, Austin Schmidt, Matthew G. Duling, Andrew Bader & M. Abbas Virji. (2021) Large-Format Additive Manufacturing and Machining Using High-Melt-Temperature Polymers. Part II: Characterization of Particles and Gases. ACS Chemical Health & Safety 28:4, pages 268-278.
Crossref
Anna‐Kaisa Viitanen, Kimmo Kallonen, Kirsi Kukko, Tomi Kanerva, Erkka Saukko, Tareq Hussein, Kaarle Hämeri & Arto Säämänen. (2021) Technical control of nanoparticle emissions from desktop 3D printing. Indoor Air 31:4, pages 1061-1071.
Crossref
Aleksandr B. Stefaniak, Lauren N. Bowers, Stephen B. MartinJr.Jr., Duane R. Hammond, Jason E. Ham, J. R. Wells, Alyson R. Fortner, Alycia K. Knepp, Sonette du Preez, Jack R. Pretty, Jennifer L. Roberts, Johan L. du Plessis, Austin Schmidt, Matthew G. Duling, Andrew Bader & M. Abbas Virji. (2021) Large-Format Additive Manufacturing and Machining Using High-Melt-Temperature Polymers. Part I: Real-Time Particulate and Gas-Phase Emissions. ACS Chemical Health & Safety 28:3, pages 190-200.
Crossref
Izabela Rojek, Dariusz Mikołajewski, Marek Macko, Zbigniew Szczepański & Ewa Dostatni. (2021) Optimization of Extrusion-Based 3D Printing Process Using Neural Networks for Sustainable Development. Materials 14:11, pages 2737.
Crossref
Wojciech Wojnowski, Renata Marcinkowska & Bożena Zabiegała. (2021) Real-time monitoring of volatiles and particles emitted from thermoplastic filaments during 3D printing. IOP Conference Series: Materials Science and Engineering 1150:1, pages 012001.
Crossref
Jihoon Park, Oh‐hun Kwon, Chungsik Yoon & Mijin Park. (2020) Estimates of particulate matter inhalation doses during three‐dimensional printing. Indoor Air 31:2, pages 392-404.
Crossref
John P. Springston, Elliott Horner & Joseph Lstiburek. 2001. Patty's Industrial Hygiene. Patty's Industrial Hygiene 1 57 .
Sarka Bernatikova, Ales Dudacek, Radka Prichystalova, Vit Klecka & Lucie Kocurkova. (2021) Characterization of Ultrafine Particles and VOCs Emitted from a 3D Printer. International Journal of Environmental Research and Public Health 18:3, pages 929.
Crossref
Aluri Manoj, Monami Bhuyan, Swarup Raj Banik & Mamilla Ravi Sankar. (2021) Review on particle emissions during fused deposition modeling of acrylonitrile butadiene styrene and polylactic acid polymers. Materials Today: Proceedings 44, pages 1375-1383.
Crossref
Alice Melocchi, Francesco Briatico-Vangosa, Marco Uboldi, Federico Parietti, Maximilian Turchi, Didier von Zeppelin, Alessandra Maroni, Lucia Zema, Andrea Gazzaniga & Ahmed Zidan. (2021) Quality considerations on the pharmaceutical applications of fused deposition modeling 3D printing. International Journal of Pharmaceutics 592, pages 119901.
Crossref
Erik Alberts, Mark Ballentine, Eftihia Barnes & Alan Kennedy. (2021) Impact of metal additives on particle emission profiles from a fused filament fabrication 3D printer. Atmospheric Environment 244, pages 117956.
Crossref
. (2020) Richtwerte für Methylmethacrylat in der Innenraumluft. Bundesgesundheitsblatt - Gesundheitsforschung - Gesundheitsschutz 64:1, pages 126-135.
Crossref
Shirun Ding, Man Pun Wan & Bing Feng Ng. (2020) Dynamic Analysis of Particle Emissions from FDM 3D Printers through a Comparative Study of Chamber and Flow Tunnel Measurements. Environmental Science & Technology 54:22, pages 14568-14577.
Crossref
Wojciech Wojnowski, Kaja Kalinowska, Jacek Gębicki & Bożena Zabiegała. (2020) Monitoring the BTEX Volatiles during 3D Printing with Acrylonitrile Butadiene Styrene (ABS) Using Electronic Nose and Proton Transfer Reaction Mass Spectrometry. Sensors 20:19, pages 5531.
Crossref
Fabio A. Cruz Sanchez, Hakim Boudaoud, Mauricio Camargo & Joshua M. Pearce. (2020) Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy. Journal of Cleaner Production 264, pages 121602.
Crossref
Ignacio Muro-Fraguas, Ana Sainz-García, Paula Fernández Gómez, María López, Rodolfo Múgica-Vidal, Elisa Sainz-García, Paula Toledano, Yolanda Sáenz, Mercedes López, Montserrat González-Raurich, Miguel Prieto, Avelino Alvarez-Ordóñez, Ana González-Marcos & Fernando Alba-Elías. (2020) Atmospheric pressure cold plasma anti-biofilm coatings for 3D printed food tools. Innovative Food Science & Emerging Technologies 64, pages 102404.
Crossref
Mariusz Marć. (2020) Emissions of selected monoaromatic hydrocarbons as a factor affecting the removal of single-use polymer barbecue and kitchen utensils from everyday use. Science of The Total Environment 720, pages 137485.
Crossref
Kevin L. Dunn, Duane Hammond, Kevin Menchaca, Gary Roth & Kevin H. Dunn. (2020) Reducing ultrafine particulate emission from multiple 3D printers in an office environment using a prototype engineering control. Journal of Nanoparticle Research 22:5.
Crossref
Haejoon Jeon, Jihoon Park, Sunju Kim, Kyungho Park & Chungsik Yoon. (2019) Effect of nozzle temperature on the emission rate of ultrafine particles during 3D printing. Indoor Air 30:2, pages 306-314.
Crossref
Szymon Wojtyła, Klaudyna Śpiewak & Tomasz Baran. (2020) Synthesis, characterization and activity of doped graphitic carbon nitride materials towards photocatalytic oxidation of volatile organic pollutants emitted from 3D printer. Journal of Photochemistry and Photobiology A: Chemistry 391, pages 112355.
Crossref
Lynn E. Secondo, Hayat I. Adawi, John Cuddehe, Kenneth Hopson, Allison Schumacher, Larry Mendoza, Charles Cartin & Nastassja A. Lewinski. (2020) Comparative analysis of ventilation efficiency on ultrafine particle removal in university MakerSpaces. Atmospheric Environment 224, pages 117321.
Crossref
Kevin L. Dunn, Kevin H. Dunn, Duane Hammond & Samuel Lo. (2020) Three-dimensional printer emissions and employee exposures to ultrafine particles during the printing of thermoplastic filaments containing carbon nanotubes or carbon nanofibers. Journal of Nanoparticle Research 22:2.
Crossref
Adam J Janvier, Elizabeth Canty-Laird & James R Henstock. (2020) A universal multi-platform 3D printed bioreactor chamber for tendon tissue engineering. Journal of Tissue Engineering 11, pages 204173142094246.
Crossref
Seong Je Park, Ji Eun Lee, Han Bit Lee, Jeanho Park, Nak-Kyu Lee, Yong Son & Suk-Hee Park. (2020) 3D printing of bio-based polycarbonate and its potential applications in ecofriendly indoor manufacturing. Additive Manufacturing 31, pages 100974.
Crossref
S. Wojtyła, P. Klama, K. Śpiewak & T. Baran. (2019) 3D printer as a potential source of indoor air pollution. International Journal of Environmental Science and Technology 17:1, pages 207-218.
Crossref
Luis Suárez & Manuel Domínguez. (2019) Sustainability and environmental impact of fused deposition modelling (FDM) technologies. The International Journal of Advanced Manufacturing Technology 106:3-4, pages 1267-1279.
Crossref
Mikko Poikkimäki, Ville Koljonen, Niko Leskinen, Mikko Närhi, Oskari Kangasniemi, Oskari Kausiala & Miikka Dal Maso. (2019) Nanocluster Aerosol Emissions of a 3D Printer. Environmental Science & Technology 53:23, pages 13618-13628.
Crossref
Mariana T. Farcas, Aleksandr B. Stefaniak, Alycia K. Knepp, Lauren Bowers, William K. Mandler, Michael Kashon, Stephen R. Jackson, Todd A. Stueckle, Jenifer D. Sisler, Sherri A. Friend, Chaolong Qi, Duane R. Hammond, Treye A. Thomas, Joanna Matheson, Vincent Castranova & Yong Qian. (2019) Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) filaments three-dimensional (3-D) printer emissions-induced cell toxicity. Toxicology Letters 317, pages 1-12.
Crossref
Panagiotis Karayannis, Fotini Petrakli, Anastasia Gkika & Elias P. Koumoulos. (2019) 3D-Printed Lab-on-a-Chip Diagnostic Systems-Developing a Safe-by-Design Manufacturing Approach. Micromachines 10:12, pages 825.
Crossref
A A M Damanhuri, A S A Subki, A Hariri, B T Tee, M H F M Fauadi, M S F Hussin & M S S Mustafa. (2019) Comparative study of selected indoor concentration from selective laser sintering process using virgin and recycled polyamide nylon (PA12). IOP Conference Series: Earth and Environmental Science 373:1, pages 012014.
Crossref
Shirun Ding, Bing Feng Ng, Xiaopeng Shang, Hu Liu, Xuehong Lu & Man Pun Wan. (2019) The characteristics and formation mechanisms of emissions from thermal decomposition of 3D printer polymer filaments. Science of The Total Environment 692, pages 984-994.
Crossref
Qian Zhang, Michal Pardo, Yinon Rudich, Ifat Kaplan-Ashiri, Jenny P. S. Wong, Aika Y. Davis, Marilyn S. Black & Rodney J. Weber. (2019) Chemical Composition and Toxicity of Particles Emitted from a Consumer-Level 3D Printer Using Various Materials. Environmental Science & Technology 53:20, pages 12054-12061.
Crossref
Aika Y. Davis, Qian Zhang, Jenny P.S. Wong, Rodney J. Weber & Marilyn S. Black. (2019) Characterization of volatile organic compound emissions from consumer level material extrusion 3D printers. Building and Environment 160, pages 106209.
Crossref
A.B. Stefaniak, A.R. Johnson, S. du Preez, D.R. Hammond, J.R. Wells, J.E. Ham, R.F. LeBouf, S.B. MartinJr.Jr., M.G. Duling, L.N. Bowers, A.K. Knepp, D.J. de Beer & J.L. du Plessis. (2019) Insights Into Emissions and Exposures From Use of Industrial-Scale Additive Manufacturing Machines. Safety and Health at Work 10:2, pages 229-236.
Crossref
Abhishek Nandan, N. A. Siddiqui & Pankaj Kumar. (2018) Assessment of environmental and ergonomic hazard associated to printing and photocopying: a review. Environmental Geochemistry and Health 41:3, pages 1187-1211.
Crossref
C. Thibaut, A. Denneulin, S. Rolland du Roscoat, D. Beneventi, L. Orgéas & D. Chaussy. (2019) A fibrous cellulose paste formulation to manufacture structural parts using 3D printing by extrusion. Carbohydrate Polymers 212, pages 119-128.
Crossref
Phillip M. Potter, Souhail R. Al-Abed, Dean Lay & Slawomir M. Lomnicki. (2019) VOC Emissions and Formation Mechanisms from Carbon Nanotube Composites during 3D Printing. Environmental Science & Technology 53:8, pages 4364-4370.
Crossref
Peter Byrley, Barbara Jane George, William K. Boyes & Kim Rogers. (2019) Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis. Science of The Total Environment 655, pages 395-407.
Crossref
Jianwei Gu, Michael Wensing, Erik Uhde & Tunga Salthammer. (2019) Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer. Environment International 123, pages 476-485.
Crossref
Królikowski Tomasz, Knitter Remigiusz, Błażejewski Andrzej, Głowiński Sebastian & Kamiński Kazimierz. 2019. Sustainable Design and Manufacturing 2019. Sustainable Design and Manufacturing 2019 485 494 .
Jocelyn E. Behm, Brenna R. Waite, S. Tonia Hsieh & Matthew R. Helmus. (2018) Benefits and limitations of three-dimensional printing technology for ecological research. BMC Ecology 18:1.
Crossref
Aleksandr B. Stefaniak, Lauren N. Bowers, Alycia K. Knepp, M. Abbas Virji, Eileen M. Birch, Jason E. Ham, J. R. Wells, Chaolong Qi, Diane Schwegler-Berry, Sherri Friend, Alyson R. Johnson, Stephen B. MartinJrJr, Yong Qian, Ryan F. LeBouf, Quinn Birch & Duane Hammond. (2018) Three-dimensional printing with nano-enabled filaments releases polymer particles containing carbon nanotubes into air. Indoor Air 28:6, pages 840-851.
Crossref
Peng Zhao, Chengchen Rao, Fu Gu, Nusrat Sharmin & Jianzhong Fu. (2018) Close-looped recycling of polylactic acid used in 3D printing: An experimental investigation and life cycle assessment. Journal of Cleaner Production 197, pages 1046-1055.
Crossref
Sonette Du Preez, Alyson Johnson, Ryan F. LeBouf, Stephanus J.L. Linde, Aleksandr B. Stefaniak & Johan Du Plessis. (2018) Exposures during industrial 3-D printing and post-processing tasks. Rapid Prototyping Journal 24:5, pages 865-871.
Crossref
Yih-Lin Cheng, Li-Ci Zhang, Freeman Chen & Yao-Hsuan Tseng. (2018) Particle Emissions of Material-Extrusion-Type Desktop 3D Printing: the Effects of Infill. International Journal of Precision Engineering and Manufacturing-Green Technology 5:4, pages 487-497.
Crossref
I. Gümperlein, E. Fischer, G. Dietrich-Gümperlein, S. Karrasch, D. Nowak, R. A. Jörres & R. Schierl. (2018) Acute health effects of desktop 3D printing (fused deposition modeling) using acrylonitrile butadiene styrene and polylactic acid materials: An experimental exposure study in human volunteers. Indoor Air 28:4, pages 611-623.
Crossref
F L Chan, R House, I Kudla, J C Lipszyc, N Rajaram & S M Tarlo. (2018) Health survey of employees regularly using 3D printers. Occupational Medicine 68:3, pages 211-214.
Crossref
Albert E. Patterson, Parvathavadhani Bahumanyam, Raghu Katragadda & Sherri L. Messimer. (2018) Automated assembly of discrete parts using fused deposition modeling. Rapid Prototyping Journal 24:2, pages 249-260.
Crossref
David Rejeski, Fu Zhao & Yong Huang. (2018) Research needs and recommendations on environmental implications of additive manufacturing. Additive Manufacturing 19, pages 21-28.
Crossref
Parham Azimi, Torkan Fazli & Brent Stephens. (2017) Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies. Journal of Industrial Ecology 21:S1, pages S107-S119.
Crossref
Fabio A. Cruz Sanchez, Hakim Boudaoud, Sandrine Hoppe & Mauricio Camargo. (2017) Polymer recycling in an open-source additive manufacturing context: Mechanical issues. Additive Manufacturing 17, pages 87-105.
Crossref
Ohhun Kwon, Chungsik Yoon, Seunghon Ham, Jihoon Park, Jinho Lee, Danbi Yoo & Yoojin Kim. (2017) Characterization and Control of Nanoparticle Emission during 3D Printing. Environmental Science & Technology 51:18, pages 10357-10368.
Crossref
Marina E. Vance, Valerie Pegues, Schuyler Van Montfrans, Weinan Leng & Linsey C. Marr. (2017) Aerosol Emissions from Fuse-Deposition Modeling 3D Printers in a Chamber and in Real Indoor Environments. Environmental Science & Technology 51:17, pages 9516-9523.
Crossref
Chengchen Rao, Fu Gu, Peng Zhao, Nusrat Sharmin, Haibing Gu & Jianzhong Fu. (2017) Capturing PM2.5 Emissions from 3D Printing via Nanofiber-based Air Filter. Scientific Reports 7:1.
Crossref
Neelam Bharti & Shailendra Singh. (2017) Three-Dimensional (3D) Printers in Libraries: Perspective and Preliminary Safety Analysis. Journal of Chemical Education 94:7, pages 879-885.
Crossref
L. Stabile, M. Scungio, G. Buonanno, F. Arpino & G. Ficco. (2017) Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature. Indoor Air 27:2, pages 398-408.
Crossref
James Norman, Rapti D. Madurawe, Christine M.V. Moore, Mansoor A. Khan & Akm Khairuzzaman. (2017) A new chapter in pharmaceutical manufacturing: 3D-printed drug products. Advanced Drug Delivery Reviews 108, pages 39-50.
Crossref
Jukka Pakkanen, Diego Manfredi, Paolo Minetola & Luca Iuliano. 2017. Sustainable Design and Manufacturing 2017. Sustainable Design and Manufacturing 2017 776 785 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.