Citations (2234)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (70)
Mohamadreza Afrasiabi & Markus Bambach. (2023) Modelling and simulation of metal additive manufacturing processes with particle methods: A review. Virtual and Physical Prototyping 18:1.
Read now
Read now
S. Hussain, N. Tönnißen, E. Soares Barreto, E. Gärtner, A. Kostka, H. Springer, V. Uhlenwinkel & N. Ellendt. (2023) Effect of substrate temperature on in-situ precipitation during laser powder bed fusion of Fe-TiB2 high modulus steel. Virtual and Physical Prototyping 18:1.
Read now
Read now
A. Sola & A. Trinchi. (2023) Boron-induced microstructural manipulation of titanium and titanium alloys in additive manufacturing. Virtual and Physical Prototyping 18:1.
Read now
Read now
Osezua Ibhadode, Zhidong Zhang, Jeffrey Sixt, Ken M. Nsiempba, Joseph Orakwe, Alexander Martinez-Marchese, Osazee Ero, Shahriar Imani Shahabad, Ali Bonakdar & Ehsan Toyserkani. (2023) Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook. Virtual and Physical Prototyping 18:1.
Read now
Read now
T. N. Prasanthi, C. Sudha & S. Saroja. (2023) An overview on the microstructure and properties of Fe/Ti based dissimilar joints. Materials Science and Technology 39:17, pages 2595-2615.
Read now
Read now
Hongyu Chen, Konrad Kosiba, C. Suryanarayana, Tiwen Lu, Yang Liu, Yonggang Wang & Konda Gokuldoss Prashanth. (2023) Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites. International Materials Reviews 68:8, pages 1192-1244.
Read now
Read now
Zhao Chen, Xiaoli Wen, Weili Wang, Xin Lin, Haiou Yang, Lianyang Chen, Haibin Wu, Wenhui Li & Nan Li. (2023) Compositive role of TiB2 in microstructure optimization and wear-resistant improvement of selective-laser-melted TiB2p/CrCoFeNiMn high-entropy composite. Materials Research Letters 11:11, pages 964-972.
Read now
Read now
Satish Prakash Karlapudy, T. Nancharaiah & V. V. Subba Rao. (2023) Influence of different build orientation and laser scan strategies on surface quality, Mechanical and Material Characteristics of 18 Ni-300 maraging steel processed through DMLS. Australian Journal of Mechanical Engineering 21:4, pages 1381-1395.
Read now
Read now
J.Z. Li & Z.C. Fan. (2023) Laser additive processing effect on microsegregation of 25Cr-35NiBr Fe-based superalloy. Materials and Manufacturing Processes 0:0, pages 1-15.
Read now
Read now
S. Talebi & M. Sadighi. (2023) Simulation of compression behavior of porous structure based on different space-filling unit cells under quasi-static loading. Mechanics Based Design of Structures and Machines 51:5, pages 2535-2549.
Read now
Read now
L. F. Arenas, B. Miranda-Alcántara, N. Kaishubayeva, A. A. M. Abahussain, F. F. Rivera, C. Ponce de León & F. C. Walsh. (2023) Nickel-coated 3D-printed titanium electrodes for electrochemical flow reactors. Transactions of the IMF 101:3, pages 119-125.
Read now
Read now
Syamak Hossein Nedjad, Mehmet Yildiz & Abdollah Saboori. (2023) Solidification behaviour of austenitic stainless steels during welding and directed energy deposition. Science and Technology of Welding and Joining 28:1, pages 1-17.
Read now
Read now
Aidin Farzaneh, Mahyar Khorasani, Ehsan Farabi, Ian Gibson, Martin Leary, AmirHossein Ghasemi & Bernard Rolfe. (2022) Sandwich structure printing of Ti-Ni-Ti by directed energy deposition. Virtual and Physical Prototyping 17:4, pages 1006-1030.
Read now
Read now
Julien Lesseur, Benoit Tranchand, Thibaut Mancier, Armand Montauzier, Céline Larignon & Simon Perusin. (2022) On the use of X-ray microtomography to control artificial defect geometries produced by metal additive manufacturing. Nondestructive Testing and Evaluation 37:5, pages 611-630.
Read now
Read now
Wadea Ameen, Abdulrahman Al-Ahmari, Naveed Ahmed, Wasim Alshammary, Sachin Salunkhe & Hussein. M.A. Hussein. (2022) Investigation the effect of electron beam melting parameters on overhang structure deformation. Materials Technology 37:10, pages 1586-1593.
Read now
Read now
Yu Yin, Qiyang Tan, Michael Bermingham, Ning Mo, Jingqi Zhang & Ming-Xing Zhang. (2022) Laser additive manufacturing of steels. International Materials Reviews 67:5, pages 487-573.
Read now
Read now
Majid Laleh, Anthony E. Hughes, Wei Xu, Ian Gibson & Mike Y. Tan. (2021) A critical review of corrosion characteristics of additively manufactured stainless steels. International Materials Reviews 66:8, pages 563-599.
Read now
Read now
O.O. Marenych, A.G. Kostryzhev, Z. Pan, H. Li & S. van Duin. (2021) Application of wire arc additive manufacturing for repair of Monel alloy components. Australian Journal of Mechanical Engineering 19:5, pages 609-617.
Read now
Read now
Alexandr I. Ivaneev, Mikhail S. Ermolin, Petr S. Fedotov, Stéphane Faucher & Gaëtane Lespes. (2021) Sedimentation Field-flow Fractionation in Thin Channels and Rotating Coiled Columns: From Analytical to Preparative Scale Separations. Separation & Purification Reviews 50:4, pages 363-379.
Read now
Read now
Ahmet Taşdemir & Serkan Nohut. (2021) An overview of wire arc additive manufacturing (WAAM) in shipbuilding industry. Ships and Offshore Structures 16:7, pages 797-814.
Read now
Read now
Bakhtiyar Mohammad Nafis, Reece Whitt, Ange-Christian Iradukunda & David Huitink. (2021) Additive Manufacturing for Enhancing Thermal Dissipation in Heat Sink Implementation: A Review. Heat Transfer Engineering 42:12, pages 967-984.
Read now
Read now
K. Ren, Y. Chew, N. Liu, Y. F. Zhang, J. Y. H. Fuh & G. J. Bi. (2021) Integrated numerical modelling and deep learning for multi-layer cube deposition planning in laser aided additive manufacturing. Virtual and Physical Prototyping 16:3, pages 318-332.
Read now
Read now
Ashley Reichardt, Andrew A. Shapiro, Richard Otis, R. Peter Dillon, John Paul Borgonia, Bryan W. McEnerney, Peter Hosemann & Allison M. Beese. (2021) Advances in additive manufacturing of metal-based functionally graded materials. International Materials Reviews 66:1, pages 1-29.
Read now
Read now
Yaojie Wen, Baicheng Zhang, Shuying Liu, Wei Cai, Pei Wang, Coryl Jing Jun Lee, Junda Ma & Xuanhui Qu. (2020) A novel experimental method for in situ strain measurement during selective laser melting. Virtual and Physical Prototyping 15:sup1, pages 583-595.
Read now
Read now
H.X. Yang, S.J. Li, W.T. Hou, Y.L. Hao, R. Yang & R.D.K. Misra. (2020) Recoverable strain in a new biomedical Ti-24Nb-4Zr-8Sn alloy with cellular structure fabricated by electron beam melting. Materials Technology 35:13-14, pages 881-886.
Read now
Read now
G. Ravi, N. Murugan & R. Arulmani. (2020) Microstructure and mechanical properties of Inconel-625 slab component fabricated by wire arc additive manufacturing. Materials Science and Technology 36:16, pages 1785-1795.
Read now
Read now
Zhao GaoLe, Jiang Yun, Hu XiaoAn, Huang Jia, Wu JinWu & Wang Yun. (2020) High-temperature mechanical properties of nickel-based superalloys manufactured by additive manufacturing. Materials Science and Technology 36:14, pages 1523-1533.
Read now
Read now
S. L. Sing & W. Y. Yeong. (2020) Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments. Virtual and Physical Prototyping 15:3, pages 359-370.
Read now
Read now
S.P. Leo Kumar & D. Avinash. (2020) Review on effect of Ti-alloy processing techniques on surface-integrity for biomedical application. Materials and Manufacturing Processes 35:8, pages 869-892.
Read now
Read now
Jan Suchy, Libor Pantelejev, David Palousek, Daniel Koutny & Jozef Kaiser. (2020) Processing of AlSi9Cu3 alloy by selective laser melting. Powder Metallurgy 63:3, pages 197-211.
Read now
Read now
Vedant Chahal & Robert M. Taylor. (2020) A review of geometric sensitivities in laser metal 3D printing. Virtual and Physical Prototyping 15:2, pages 227-241.
Read now
Read now
F. C. Walsh, L. F. Arenas & C. Ponce de León. (2020) A virtuous cycle in materials engineering and surface finishing: design-print-image. Transactions of the IMF 98:2, pages 65-72.
Read now
Read now
L. F. Arenas, N. Kaishubayeva, C. Ponce de León & F. C. Walsh. (2020) Electrodeposition of platinum on 3D-printed titanium mesh to produce tailored, high area anodes. Transactions of the IMF 98:1, pages 48-52.
Read now
Read now
M. G. Jiang, Z. W. Chen, J. D. Tong, C. Y. Liu, G. Xu, H. B. Liao, P. Wang, X. Y. Wang, M. Xu & C. S. Lao. (2019) Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting. Materials Research Letters 7:10, pages 426-432.
Read now
Read now
Wei Wu, Jiaxiang Xue, Zhanhui Zhang & Ping Yao. (2019) Comparative study of 316L depositions by two welding current processes. Materials and Manufacturing Processes 34:13, pages 1502-1508.
Read now
Read now
Manu Srivastava, Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee & T. K. Kundra. (2019) A Review on Recent Progress in Solid State Friction Based Metal Additive Manufacturing: Friction Stir Additive Techniques. Critical Reviews in Solid State and Materials Sciences 44:5, pages 345-377.
Read now
Read now
Arya Prasad & Balasubramanian Kandasubramanian. (2019) Fused deposition processing polycaprolactone of composites for biomedical applications. Polymer-Plastics Technology and Materials 58:13, pages 1365-1398.
Read now
Read now
M. Wang, Q. Wang, X. Lin & W. D. Huang. (2019) Microstructure and mechanical properties of laser solid formed 30Cr–Mn–Si–Ni–2A ultra-high-strength steel. Science and Technology of Welding and Joining 24:5, pages 457-464.
Read now
Read now
Wonjong Jeong, Young-Sam Kwon & Dongsik Kim. (2019) Three-dimensional printing of tungsten structures by directed energy deposition. Materials and Manufacturing Processes 34:9, pages 986-992.
Read now
Read now
Xihe Liu, Congcong Zhao, Xin Zhou, Florian Eibl, Zhijian Shen, Wei Liu & Wilhelm Meiners. (2019) CNT-reinforced AlSi10Mg composite by selective laser melting: microstructural and mechanical properties. Materials Science and Technology 35:9, pages 1038-1045.
Read now
Read now
Hossein Eskandari Sabzi. (2019) Powder bed fusion additive layer manufacturing of titanium alloys. Materials Science and Technology 35:8, pages 875-890.
Read now
Read now
J. M. Torralba, P. Alvaredo & Andrea García-Junceda. (2019) High-entropy alloys fabricated via powder metallurgy. A critical review. Powder Metallurgy 62:2, pages 84-114.
Read now
Read now
Luis I. Escano, Niranjan D. Parab, Lianghua Xiong, Qilin Guo, Cang Zhao, Tao Sun & Lianyi Chen. (2019) Investigating Powder Spreading Dynamics in Additive Manufacturing Processes by In-situ High-speed X-ray Imaging. Synchrotron Radiation News 32:2, pages 9-13.
Read now
Read now
Niranjan D. Parab, Cang Zhao, Ross Cunningham, Luis I. Escano, Benjamin Gould, Sarah Wolff, Qilin Guo, Lianghua Xiong, Christopher Kantzos, Joseph Pauza, Kamel Fezzaa, Aaron Greco, Anthony Rollett, Lianyi Chen & Tao Sun. (2019) High-speed Synchrotron X-ray Imaging of Laser Powder Bed Fusion Process. Synchrotron Radiation News 32:2, pages 4-8.
Read now
Read now
Mingyue Zheng, Shaoming Zhang, Qiang Hu, Jun Xu, Weimin Mao, Liangliang Lu, Huijun He, Yingjie Liu & Wendong Zhao. (2019) A novel crucible-less inert gas atomisation method of producing titanium powder for additive manufacturing. Powder Metallurgy 62:1, pages 15-21.
Read now
Read now
Chaolin Tan, Kesong Zhou, Wenyou Ma, Bonnie Attard, Panpan Zhang & Tongchun Kuang. (2018) Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties. Science and Technology of Advanced Materials 19:1, pages 370-380.
Read now
Read now
Zhigang Zak Fang, James D. Paramore, Pei Sun, K. S. Ravi Chandran, Ying Zhang, Yang Xia, Fei Cao, Mark Koopman & Michael Free. (2018) Powder metallurgy of titanium – past, present, and future. International Materials Reviews 63:7, pages 407-459.
Read now
Read now
A du Plessis, I Yadroitsava, I Yadroitsev, SG le Roux & DC Blaine. (2018) Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing. Virtual and Physical Prototyping 13:4, pages 266-281.
Read now
Read now
Alessandro Salmi, Flaviana Calignano, Manuela Galati & Eleonora Atzeni. (2018) An integrated design methodology for components produced by laser powder bed fusion (L-PBF) process. Virtual and Physical Prototyping 13:3, pages 191-202.
Read now
Read now
Nikit Deoray & Balasubramanian Kandasubramanian. (2018) Review on Three-Dimensionally Emulated Fiber-Embedded Lactic Acid Polymer Composites: Opportunities in Engineering Sector. Polymer-Plastics Technology and Engineering 57:9, pages 860-874.
Read now
Read now
Xuhui Zi, Chao Chen, Xiaojun Wang, Pengwei Wang, Xiaoyong Zhang & Kechao Zhou. (2018) Spheroidisation of tungsten powder by radio frequency plasma for selective laser melting. Materials Science and Technology 34:6, pages 735-742.
Read now
Read now
Alexander J. Dunbar & Abdalla R. Nassar. (2018) Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing. Virtual and Physical Prototyping 13:1, pages 14-19.
Read now
Read now
D. Brown, C. Li, Z. Y. Liu, X. Y. Fang & Y. B. Guo. (2018) Surface integrity of Inconel 718 by hybrid selective laser melting and milling. Virtual and Physical Prototyping 13:1, pages 26-31.
Read now
Read now
Stéphane Gorsse, Christopher Hutchinson, Mohamed Gouné & Rajarshi Banerjee. (2017) Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Science and Technology of Advanced Materials 18:1, pages 584-610.
Read now
Read now
T. Borkar, R. Conteri, X. Chen, R. V. Ramanujan & R. Banerjee. (2017) Laser additive processing of functionally-graded Fe–Si–B–Cu–Nb soft magnetic materials. Materials and Manufacturing Processes 32:14, pages 1581-1587.
Read now
Read now
Shahir M. Yusuf & Nong Gao. (2017) Influence of energy density on metallurgy and properties in metal additive manufacturing. Materials Science and Technology 33:11, pages 1269-1289.
Read now
Read now
J. Tuominen, J. Näkki, H. Pajukoski, L. Hyvärinen & P. Vuoristo. (2016) Microstructural and abrasion wear characteristics of laser-clad tool steel coatings. Surface Engineering 32:12, pages 923-933.
Read now
Read now
C. Körner. (2016) Additive manufacturing of metallic components by selective electron beam melting — a review. International Materials Reviews 61:5, pages 361-377.
Read now
Read now
W. J. Sames, F. A. List, S. Pannala, R. R. Dehoff & S. S. Babu. (2016) The metallurgy and processing science of metal additive manufacturing. International Materials Reviews 61:5, pages 315-360.
Read now
Read now
Youwen Yang, Ping Wu, Xin Lin, Yong Liu, Hong Bian, Yuanzhuo Zhou, Chengde Gao & Cijun Shuai. (2016) System development, formability quality and microstructure evolution of selective laser-melted magnesium. Virtual and Physical Prototyping 11:3, pages 173-181.
Read now
Read now
D. Greitemeier, C. Dalle Donne, F. Syassen, J. Eufinger & T. Melz. (2016) Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V. Materials Science and Technology 32:7, pages 629-634.
Read now
Read now
D.H. Dai & D.D. Gu. (2016) Tailored reinforcement/matrix interface and thermodynamic mechanism during selective laser melting composites. Materials Science and Technology 32:7, pages 617-628.
Read now
Read now
M. Wang, X. Lin & W. Huang. (2016) Laser additive manufacture of titanium alloys. Materials Technology 31:2, pages 90-97.
Read now
Read now
L.-C. Zhang, H. Attar, M. Calin & J. Eckert. (2016) Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications. Materials Technology 31:2, pages 66-76.
Read now
Read now
C. Y. Yap, C. K. Chua & Z. L. Dong. (2016) An effective analytical model of selective laser melting. Virtual and Physical Prototyping 11:1, pages 21-26.
Read now
Read now
Anton S. Tremsin, Yan Gao, Laura C. Dial, Francesco Grazzi & Takenao Shinohara. (2016) Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy. Science and Technology of Advanced Materials 17:1, pages 324-336.
Read now
Read now
Xiao Zhao, Qingsong Wei, Bo Song, Ying Liu, Xiwang Luo, Shifeng Wen & Yusheng Shi. (2015) Fabrication and Characterization of AISI 420 Stainless Steel Using Selective Laser Melting. Materials and Manufacturing Processes 30:11, pages 1283-1289.
Read now
Read now
Qian Peng, Zhangui Tang, Ousheng Liu & Zhiwei Peng. (2015) Rapid prototyping-assisted maxillofacial reconstruction. Annals of Medicine 47:3, pages 186-208.
Read now
Read now
Matthew E. Lynch, Wenjiong Gu, Tahany El-Wardany, Arthur Hsu, Daniel Viens, Aaron Nardi & Michael Klecka. (2013) Design and topology/shape structural optimisation for additively manufactured cold sprayed components. Virtual and Physical Prototyping 8:3, pages 213-231.
Read now
Read now
Dongdong Gu & Guoquan Zhang. (2013) Selective laser melting of novel nanocomposites parts with enhanced tribological performance. Virtual and Physical Prototyping 8:1, pages 11-18.
Read now
Read now
Articles from other publishers (2164)
H.Y. Ma, J.C. Wang, P. Qin, Y.J. Liu, L.Y. Chen, L.Q. Wang & L.C. Zhang. (2024) Advances in additively manufactured titanium alloys by powder bed fusion and directed energy deposition: Microstructure, defects, and mechanical behavior. Journal of Materials Science & Technology 183, pages 32-62.
Crossref
Crossref
Yuqi He, Fengying Zhang, Yuhong Dai, Kexin Zhao, Zimeng Ye, Zerong Yu, Chao Xia & Hua Tan. (2024) Enhanced low cycle fatigue properties of selective laser melting Ti–6Al–4V with fine-tuned composition and optimized microstructure. Journal of Materials Science & Technology 180, pages 129-140.
Crossref
Crossref
Jun Hu, Xin Lin & Yunlong Hu. (2024) High wear resistance and strength of Hastelloy X reinforced with TiC fabricated by laser powder bed fusion additive manufacturing. Applied Surface Science 648, pages 159004.
Crossref
Crossref
Bo Yao, Nan Kang, Xiangyu Li, Dou Li, Mohamed EL Mansori, Jing Chen, Haiou Yang, Hua Tan & Xin Lin. (2023) Toward understanding the microstructure characteristics, phase selection and magnetic properties of laser additive manufactured Nd-Fe-B permanent magnets. International Journal of Extreme Manufacturing 6:1, pages 015002.
Crossref
Crossref
Kaitlyn M. Mullin, John H. Martin, Christopher S. Roper, Carlos G. Levi & Tresa M. Pollock. (2024) Transpiration cooling of a porous Nb-based alloy in high heat flux conditions. International Journal of Thermal Sciences 196, pages 108758.
Crossref
Crossref
Hao Yi, Le Jia, Jialuo Ding & Huijun Li. (2024) Achieving material diversity in wire arc additive manufacturing: Leaping from alloys to composites via wire innovation. International Journal of Machine Tools and Manufacture 194, pages 104103.
Crossref
Crossref
Vani Shankar, Hemant Kumar, R. Kannan, C.R. Das, A. Nagesha, V. Karthik, A. Moitra & M. Vasudevan. (2024) Studies on high-temperature fatigue behaviour and mechanism for conventionally cast and directed energy deposited forms of Alloy 625. International Journal of Fatigue 178, pages 108005.
Crossref
Crossref
Lei Wang. 2024. Handbook of Liquid Metals. Handbook of Liquid Metals
1
39
.
Sudipto Datta, Yusuf Olatunji Waidi & Arbind Prasad. 2023. Advanced Materials and Manufacturing Techniques for Biomedical Applications. Advanced Materials and Manufacturing Techniques for Biomedical Applications
383
409
.
Yong Hu, Yudong Lin, Lei Yang, Siqi Wu, DianYu Tang, Chunze Yan & Yusheng Shi. (2023) Additive Manufacturing of Carbon Fiber-reinforced Composites: A Review. Applied Composite Materials.
Crossref
Crossref
Jose M. Costa, Elsa W. Sequeiros & Manuel F. Vieira. (2023) Fused Filament Fabrication for Metallic Materials: A Brief Review. Materials 16:24, pages 7505.
Crossref
Crossref
Zhanyong Zhao, Jianbin Wang, Wenbo Du, Peikang Bai & Xiayu Wu. (2023) Numerical simulation and experimental study of the 7075 aluminum alloy during selective laser melting. Optics & Laser Technology 167, pages 109814.
Crossref
Crossref
Yufei Chen, Xiancheng Zhang, Donghong Ding, Xiaowei Wang, Kaiming Zhang, Yixin Liu, Tiwen Lu & Shantung Tu. (2023) Integration of interlayer surface enhancement technologies into metal additive manufacturing: A review. Journal of Materials Science & Technology 165, pages 94-122.
Crossref
Crossref
Kumar Kanishka & Bappa Acherjee. (2023) Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges. Journal of Manufacturing Processes 107, pages 574-619.
Crossref
Crossref
Daniil Bochkov, Tresa Pollock & Frederic Gibou. (2023) A numerical method for sharp-interface simulations of multicomponent alloy solidification. Journal of Computational Physics 494, pages 112494.
Crossref
Crossref
Juan Ignacio Ahuir-Torres, Gregory J. Gibbons, Geoff West, Amit Das & Hiren R. Kotadia. (2023) Understanding the corrosion behaviour of Al-Mg alloy fabricated using a Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) process. Journal of Alloys and Compounds 969, pages 172300.
Crossref
Crossref
Konrad Kosiba, Tobias Gustmann, Jong Tae Kim, Jinwoo Seok, Juree Jung, Lukas Beyer, Sergio Scudino, Lars Giebeler, Junhee Han & Julia K. Hufenbach. (2023) Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions. Journal of Alloys and Compounds 967, pages 171773.
Crossref
Crossref
Bharat Mehta, Karin Frisk & Lars Nyborg. (2023) Advancing novel Al-Mn-Cr-Zr based family of alloys tailored for powder bed fusion-laser beam process. Journal of Alloys and Compounds 967, pages 171685.
Crossref
Crossref
Abdrakhman Naizabekov, Marina Samodurova, Evgenii Bodrov, Sergey Lezhnev, Olga Samoilova, Evgeny Trofimov, Dmitry Mikhailov, Ksenia Litvinyuk, Svetlana Trofimova, Yuliya Latfulina, Evgeniy Panin & Kirill Pashkeev. (2023) Use of laser cladding for the synthesis of coatings from high-entropy alloys reinforced with ceramic particles. Case Studies in Construction Materials 19, pages e02541.
Crossref
Crossref
Asim Rashid & Aditya Gopaluni. (2023) A Review of Residual Stress and Deformation Modeling for Metal Additive Manufacturing Processes. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 2:4, pages 100102.
Crossref
Crossref
Md Hosne Mobarak, Md. Aminul Islam, Nayem Hossain, Md. Zobair Al Mahmud, Md. Thohid Rayhan, Nushrat Jahan Nishi & Mohammad Asaduzzaman Chowdhury. (2023) Recent advances of additive manufacturing in implant fabrication – A review. Applied Surface Science Advances 18, pages 100462.
Crossref
Crossref
Andrew House, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreizin & Murat Guvendiren. (2023) Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing. Progress in Additive Manufacturing 8:6, pages 1573-1585.
Crossref
Crossref
Ilija Djekić, Branko Velebit, Branimir Pavlić, Predrag Putnik, Daniela Šojić Merkulov, Anica Bebek Markovinović & Danijela Bursać Kovačević. (2023) Food Quality 4.0: Sustainable Food Manufacturing for the Twenty-First Century. Food Engineering Reviews 15:4, pages 577-608.
Crossref
Crossref
Dong Wu, Wenya Li, Xiawei Yang, Yangfan Zou, Yu Su & Yaxin Xu. (2023) Heat Treatment Effects on the Microstructure, Mechanical and Wear Properties of an Al 2024 Cold Spray Additive Manufactured Deposit. Journal of Thermal Spray Technology 32:8, pages 2378-2393.
Crossref
Crossref
Kashif Ishfaq, Muhammad Dawar Azhar Khan, Muhammad Atyab Azhar Khan, Muhammad Arif Mahmood & Muhammad Asad Maqsood. (2023) A correlation among industry 4.0, additive manufacturing, and topology optimization: a state-of-the-art review. The International Journal of Advanced Manufacturing Technology 129:9-10, pages 3771-3797.
Crossref
Crossref
Natan Nudelis & Peter Mayr. (2023) Process Parameter Prediction in Laser Powder Bed Fusion Using an Artificial Neural Network. Key Engineering Materials 964, pages 59-64.
Crossref
Crossref
M. Rangapuram, S. Babalola, J. W. Newkirk, L. N. Bartlett, F. W. Liou, K. Chandrashekhara & Stephen R. Cluff. (2023) Multiphysics modeling and experimental validation of high-strength steel in laser powder bed fusion process. Progress in Additive Manufacturing.
Crossref
Crossref
M. R. Stoudt & R. E. Ricker. (2023) The Influence of δ-Phase on the Environmentally Assisted Cracking Resistance of an Additively Manufactured Nickel-Based Superalloy. Metallurgical and Materials Transactions A.
Crossref
Crossref
Hui Liu, Hanyang Yu, Chuan Guo, Xuliang Chen, Shiyu Zhong, Lin Zhou, Amr Osman & Jian Lu. (2023) Review on Fatigue of Additive Manufactured Metallic Alloys: Microstructure, Performance, Enhancement, and Assessment Methods. Advanced Materials.
Crossref
Crossref
Hongbin Li, Zhuang Jiang, Zhihua Li, Yubao Peng, Qiushuang Zhang & Xinyi Xiao. (2023) The Interface Strengthening of Multi-Walled Carbon Nanotubes/Polylactic Acid Composites via the In-Loop Hybrid Manufacturing Method. Polymers 15:22, pages 4426.
Crossref
Crossref
Matteo Gavazzoni, Stefano Beretta, Laura Boniotti, Emiliano Di Carmine, Luciano Gallazzi, Romano Iazurlo & Stefano Foletti. (2023) Structural assessment of a multi-functional additively manufactured space component with bulk-lattice hybrid architecture. Thin-Walled Structures 192, pages 111158.
Crossref
Crossref
Payam Seraj, Abbas Akbarzadeh & Mohsen Mohammadi. (2023) Finite element heat transfer analysis in selective laser melting of AlSi10Mg alloy using bi-directional scan strategy: Enhanced thermal conductivity considerations. Journal of Materials Research and Technology 27, pages 6008-6020.
Crossref
Crossref
Kyung Young Kim, Jae H. Kim, Dae Won Yun, P.L. Narayana, Jong Hun Kim, Je In Lee & Jae-Keun Hong. (2023) Enhancing the mechanical properties and corrosion resistance of commercially pure titanium using tungsten carbide composites fabricated via additive manufacturing. Journal of Materials Research and Technology 27, pages 5070-5081.
Crossref
Crossref
Qing Wang, Deyin Kong & Zhihui Zhang. (2023) Ultra-high strength and high toughness 24CrNiMo alloy steel fabricated by laser powder bed fusion and subsequent quenching. Journal of Materials Research and Technology 27, pages 5109-5127.
Crossref
Crossref
Shuang–Shuang Li, Xin Yue, Qing–Yuan Li, He–Li Peng, Bai–Xin Dong, Tian–Shu Liu, Hong–Yu Yang, Jun Fan, Shi–Li Shu, Feng Qiu & Qi–Chuan Jiang. (2023) Development and applications of aluminum alloys for aerospace industry. Journal of Materials Research and Technology 27, pages 944-983.
Crossref
Crossref
Qin Peng, Yunhu Zhang, Sigurd Wenner, Bin Yang, Benjamin Milkereit, Jette Broer, Armin Springer, Christoph Schick & Olaf Keßler. (2023) Rapid solidification of Al-Si alloys using differential fast scanning calorimetry. Journal of Alloys and Compounds 965, pages 171346.
Crossref
Crossref
Abdul Hai Alami, Abdul Ghani Olabi, Adnan Alashkar, Shamma Alasad, Haya Aljaghoub, Hegazy Rezk & Mohammad Ali Abdelkareem. (2023) Additive manufacturing in the aerospace and automotive industries: Recent trends and role in achieving sustainable development goals. Ain Shams Engineering Journal 14:11, pages 102516.
Crossref
Crossref
Can Wang, Dingyong He, Li Cui, Xingye Guo, Zhen Tan & Xu Wu. (2023) Influence of surface pretreatment on porosity and microstructure of laser welding in AlSi10Mg alloys sheets fabricated by laser powder bed fusion. Welding in the World 67:11, pages 2449-2462.
Crossref
Crossref
Arpit Kumar Singh, Anshu Sahu & Palani Iyamperumal Anand. (2023) Unraveling spatial variations of graphenization of Kapton polyimide via CO2 laser interaction: a comprehensive theoretical simulation and Raman spectroscopy mapping study. Applied Physics A 129:11.
Crossref
Crossref
Dong-Il Jung, Kwang-Kyu Lee, Tae-Hwan Kim & Dong-Gyu Ahn. (2023) A Study on Powder Deposition Characteristics of Binder Jetting Process According to Design of Scraper with Multi-steps. Journal of the Korean Society of Manufacturing Process Engineers 22:10, pages 94-102.
Crossref
Crossref
Zhanwei Yuan, Jie Bai, Fengchun Chang, Fuguo Li, Rui Ma, Junchao Zheng & Junyu Ren. (2023) Anisotropy of Hastelloy X Prepared by Selective Laser Melting After Hot Isostatic Pressuring and Heat Treatment. Journal of Materials Engineering and Performance.
Crossref
Crossref
Qing Chai, Chaoxin Jiang, Chunjie Huang, Yingchun Xie, Xingchen Yan, Rocco Lupoi, Chao Zhang, Peter Rusinov & Shuo Yin. (2023) Printing Cu on a Cold-Sprayed Cu Plate via Selective Laser Melting—Hybrid Additive Manufacturing. Journal of Manufacturing and Materials Processing 7:6, pages 188.
Crossref
Crossref
Shuilong Huang, Qingjun Chen, Li Ji, Kan Wang & Guosheng Huang. (2023) Microstructure and Internal Friction Behavior of Laser 3D Printed Fe-Based Amorphous Composites. Acta Metallurgica Sinica (English Letters).
Crossref
Crossref
Muhammad Waqas, Dingyong He, Zhen Tan, Peng Yang, Mu Gao & Xingye Guo. (2023) A study of selective laser melting process for pure zinc and Zn10mg alloy on process parameters and mechanical properties. Rapid Prototyping Journal 29:9, pages 1923-1939.
Crossref
Crossref
Zhiyong Li, Xiuli He, Shaoxia Li, Xinfeng Kan, Yanjun Yin & Gang Yu. (2023) Sulfur-induced transitions of thermal behavior and flow dynamics in laser powder bed fusion of 316L powders. Thermal Science and Engineering Progress 45, pages 102072.
Crossref
Crossref
Yiting Zhang, Liangyun Lan & Quanqiang Shi. (2023) Microstructural evolution and precipitated phase characteristics in the fusion zone for the as-repaired Inconel 718 alloy by directed energy deposition additive manufacturing. Materials Characterization 204, pages 113222.
Crossref
Crossref
An Wang, Qianglong Wei, Zijue Tang, Pengyuan Ren, Xiaolin Zhang, Yi Wu, Haowei Wang, Anton Du Plessis, Jie Huang, Kaiming Hu & Hongze Wang. (2023) Effects of processing parameters on pore defects in blue laser directed energy deposition of aluminum by in and ex situ observation. Journal of Materials Processing Technology 319, pages 118068.
Crossref
Crossref
Merve G. Özden & Nicola A. Morley. (2023) Optimizing laser additive manufacturing process for Fe-based nano-crystalline magnetic materials. Journal of Alloys and Compounds 960, pages 170644.
Crossref
Crossref
Yixuan Chen, Weihao Wang, Yao Ou, Daiyun Li, Hai Chang, Yingna Wu, Rui Yang, Zirong Zhai & Changpeng Li. (2023) Effect of high preheating on the microstructure and mechanical properties of high gamma prime Ni-based superalloy manufactured by laser powder bed fusion. Journal of Alloys and Compounds 960, pages 170598.
Crossref
Crossref
Ilaria Roveda, Itziar Serrano-Munoz, Jan Haubrich, Guillermo Requena & Mauro Madia. (2023) Influence of post-process heat treatments on the fatigue crack propagation behaviour of a PBF-LB/M AlSi10Mg alloy. International Journal of Fatigue 175, pages 107808.
Crossref
Crossref
Svenja Ehmsen, Li Yi, Moritz Glatt, Barbara S. Linke & Jan C. Aurich. (2023) Reusable unit process life cycle inventory for manufacturing: high speed laser directed energy deposition. Production Engineering 17:5, pages 715-731.
Crossref
Crossref
Yannick Naunheim, Alice Perrin, Christian E. Oliver, Katherine Stone & Christopher A. Schuh. (2023) A Limit to Accelerated Free-Sintering: Nano-Phase Separation Interferes With Organic Debinding. Metallurgical and Materials Transactions A 54:10, pages 4041-4052.
Crossref
Crossref
Thabiso Hopewell Sibisi, Mxolisi Brendon Shongwe, Lerato C. Tshabalala & Ipfi Mathoho. (2023) LAM additive manufacturing: a fundamental review on mechanical properties, common defects, dominant processing variables, and its applications. The International Journal of Advanced Manufacturing Technology 128:7-8, pages 2847-2861.
Crossref
Crossref
Svyetlichnyy Dmytro, Bajda Szymon & Krzyzanowski Michal. (2023) An extended laser beam heating model for a numerical platform to simulate multi-material selective laser melting. The International Journal of Advanced Manufacturing Technology 128:7-8, pages 3451-3470.
Crossref
Crossref
Mohammad Abedi, Dmitry Moskovskikh, Andrey Nepapushev, Veronika Suvorova, Haitao Wang & Valentin Romanovski. (2023) Advancements in Laser Powder Bed Fusion of Carbon Nanotubes-Reinforced AlSi10Mg Alloy: A Comprehensive Analysis of Microstructure Evolution, Properties, and Future Prospects. Metals 13:9, pages 1619.
Crossref
Crossref
F. Impaziente, L. Giorleo & F. Mazzucato. (2023) Selective laser melting of H13 tool steel powder: effect of process parameter on complex part production. Progress in Additive Manufacturing.
Crossref
Crossref
Yufeng Zhou, Jingbo Chen, Xuying Liu & Jianwei Xu. (2023) Three/Four-Dimensional Printed PLA Nano/Microstructures: Crystallization Principles and Practical Applications. International Journal of Molecular Sciences 24:18, pages 13691.
Crossref
Crossref
Leonidas Gargalis, Leonidas Karavias, Joachim S. Graff, Spyros Diplas, Elias P. Koumoulos & Evangelia K. Karaxi. (2023) Novel Powder Feedstock towards Microstructure Engineering in Laser Powder Bed Fusion: A Case Study on Duplex/Super Duplex and Austenitic Stainless-Steel Alloys. Metals 13:9, pages 1546.
Crossref
Crossref
Cijun Shuai, Desheng Li, Xiong Yao, Xia Li & Chengde Gao. (2023) Additive manufacturing of promising heterostructure for biomedical applications. International Journal of Extreme Manufacturing 5:3, pages 032012.
Crossref
Crossref
Y. Chen, Y.T. Tang, D.M. Collins, S.J. Clark, W. Ludwig, R. Rodriguez-Lamas, C. Detlefs, R.C. Reed, P.D. Lee, P.J. Withers & C. Yildirim. (2023) High-resolution 3D strain and orientation mapping within a grain of a directed energy deposition laser additively manufactured superalloy. Scripta Materialia 234, pages 115579.
Crossref
Crossref
Weiming Ji, Runhua Zhou, Priyanka Vivegananthan, Mao See Wu, Huajian Gao & Kun Zhou. (2023) Recent progress in gradient-structured metals and alloys. Progress in Materials Science, pages 101194.
Crossref
Crossref
T. Mukherjee, J.W. Elmer, H.L. Wei, T.J. Lienert, W. Zhang, S. Kou & T. DebRoy. (2023) Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components. Progress in Materials Science 138, pages 101153.
Crossref
Crossref
Hadi Fallahi, Mojtaba Sadighi & Saeed Saber Samandari. (2023) Compressive mechanical properties of open-cell cubic and rhombic dodecahedron lattice structures of variable cross section fabricated by fused deposition modeling. Mechanics of Materials 184, pages 104712.
Crossref
Crossref
Lingzhi Wu, Dil Faraz Khan, Cong Zhang, Ruijie Zhang, Xue Jiang, Yongwei Wang, Geng Liu, Haiqing Yin, Jie Su & Xuanhui Qu. (2023) Microstructure and mechanical characterization of additively manufactured Fe11Cr8Ni5Co3Mo martensitic stainless steel. Materials Characterization 203, pages 113106.
Crossref
Crossref
Konrad Kosiba, Daniel Wolf, Matthias Bönisch, Kai Neufeld, Ruben Hühne, Tobias Gustmann, Jozef Bednarčík, Hongyu Chen, Xiaoliang Han, Volker Hoffmann, Lukas Beyer, Uta Kühn, Sergio Scudino, Lars Giebeler & Julia K. Hufenbach. (2023) Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating. Journal of Materials Science & Technology 156, pages 1-19.
Crossref
Crossref
Haishun Liu, Yangyang Jiang, Dengfeng Yang, Qi Jiang & Weiming Yang. (2023) Pores and cracks in the metallic glasses prepared by laser powder bed fusion. Journal of Materials Research and Technology 26, pages 3070-3089.
Crossref
Crossref
Jiang Bi, Liukun Wu, Shide Li, Zhuoyun Yang, Xiangdong Jia, Mikhail Dmitrievich Starostenkov & Guojiang Dong. (2023) Beam shaping technology and its application in metal laser additive manufacturing: A review. Journal of Materials Research and Technology 26, pages 4606-4628.
Crossref
Crossref
Nooruddin Ansari, Dong-Hyun Lee, E-Wen Huang, Jayant Jain & Soo Yeol Lee. (2023) Anisotropic microstructure, nanomechanical and corrosion behavior of direct energy deposited Ti–13Nb–13Zr biomedical alloy. Journal of Materials Research and Technology 26, pages 2682-2694.
Crossref
Crossref
Zhao Chen, Xiaoli Wen, Weili Wang, Xin Lin, Haiou Yang, Ze Jiang, Lianyang Chen, Haibin Wu, Wenhui Li & Nan Li. (2023) Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB2-modified CoCrFeMnNi high-entropy alloy using laser powder bed fusion. Journal of Materials Research and Technology 26, pages 1198-1213.
Crossref
Crossref
Ruiyao Zhang, Xiangwei Li, Xiaodong Hou, Jiahao Mo, Jeferson Araújo de Oliveira, Fei Wang, Youzhao Zhang, Jun Li, Sanjooram Paddea, Hongbiao Dong & Shuyan Zhang. (2023) Residual stress mapping in additively manufactured steel mould parts using asymmetric and multiple cuts contour method. Journal of Manufacturing Processes 102, pages 1000-1009.
Crossref
Crossref
Eun-Jung Kim, Choon-Man Lee & Dong-Hyeon Kim. (2023) Study on the characteristics of functionally graded materials from Ni-20cr to Ti-6Al-4V via directed energy deposition. Journal of Alloys and Compounds 955, pages 170263.
Crossref
Crossref
Zezhou Kuai, Zhonghua Li, Bin Liu, Yanlei Chen, Huodong Li & Peikang Bai. (2023) Microstructure and mechanical properties of CuCrZr/316L hybrid components manufactured using selective laser melting. Journal of Alloys and Compounds 955, pages 170103.
Crossref
Crossref
Ritin Mathews, Kishore Mysore Nagaraja, Runyu Zhang, Sumair Sunny, Haoliang Yu, Deon Marais, Andrew Venter, Wei Li, Hongbing Lu & Arif Malik. (2023) Temporally continuous thermofluidic–thermomechanical modeling framework for metal additive manufacturing. International Journal of Mechanical Sciences 254, pages 108424.
Crossref
Crossref
M.H. Nie, P.F. Jiang, Y.X. Zhou, Y.L. Li & Z.H. Zhang. (2023) Studies on the 316/NiTi functionally gradient ultra-thick coatings fabricated with directed energy deposition: Microstructure, crystallography and wear mechanism. Applied Surface Science 630, pages 157497.
Crossref
Crossref
Ahmet Turnali, S. Amir H. Motaman, Yuling Chang, Bernd Böttger, Alexandros Serafeim, Lennart Sayk, Nicolas J. Peter, Silvia Richter, Alexander Schwedt, Simon Höges & Christian Haase. (2023) Evolution of microstructural heterogeneities in additively manufactured low-alloy steel. Additive Manufacturing 78, pages 103859.
Crossref
Crossref
Fatih Uzun, Hector Basoalto, Konstantinos Liogas, Jingwei Chen, Igor P. Dolbnya, Zifan Ivan Wang & Alexander M. Korsunsky. (2023) Voxel-based full-field eigenstrain reconstruction of residual stresses in additive manufacturing parts using height digital image correlation. Additive Manufacturing 77, pages 103822.
Crossref
Crossref
Wei Wang, Daniel S Balint, Amir A Shirzadi, Yaping Wang, Junyi Lee, Lee Aucott & Jun Jiang. (2023) Imparted benefits on mechanical properties by achieving grain boundary migration across voids. Acta Materialia 256, pages 119103.
Crossref
Crossref
Ruiyao Liu, Guofeng Yao, Zezhou Xu, Xue Guo, Jianyong Li, Zhenglei Yu, Ping Liang, Zhihui Zhang & Chunyang Han. (2023) Mechanical Characteristics Analysis of 3D-printing Novel Chiral Honeycomb Array Structures Based on Functional Principle and Constitutive Relationship. Journal of Bionic Engineering 20:5, pages 1917-1929.
Crossref
Crossref
Mulla Ahmet Pekok, Rossitza Setchi, Michael Ryan, Emmanuel Brousseau, Quanquan Han & Dongdong Gu. (2023) Graphene nanoplatelets reinforced Al-Cu-Mg composite fabricated using laser powder bed fusion: microstructure, mechanical properties, and wear behaviour. The International Journal of Advanced Manufacturing Technology 128:3-4, pages 1597-1613.
Crossref
Crossref
M. Rangapuram, S. K. Dasari, J. W. Newkirk, K. Chandrashekhara, H. Misak, P. R. Toivonen, D. Klenosky, T. Unruh & J. Sam. (2023) Performance evaluation of composite sandwich structures with additively manufactured aluminum honeycomb cores with increased bonding surface area. Polymer Composites 44:9, pages 5357-5368.
Crossref
Crossref
Olivier Guillon, Wolfgang Rheinheimer & Martin Bram. (2023) A Perspective on Emerging and Future Sintering Technologies of Ceramic Materials. Advanced Engineering Materials 25:18.
Crossref
Crossref
Po-Sung Chen, Pei-Hua Tsai, Tsung-Hsiung Li, Jason Shian-Ching Jang, Jacob Chih-Ching Huang, Che-Hsin Lin, Cheng-Tang Pan & Hsuan-Kai Lin. (2023) Development and Fabrication of Biocompatible Ti-Based Bulk Metallic Glass Matrix Composites for Additive Manufacturing. Materials 16:17, pages 5935.
Crossref
Crossref
Abdulaziz Kurdi, Thamer Tabbakh & Animesh Kumar Basak. (2023) Microstructural and Nanoindentation Investigation on the Laser Powder Bed Fusion Stainless Steel 316L. Materials 16:17, pages 5933.
Crossref
Crossref
Gürkan Kaya, Uğur Köklü, Tevfik Oğuzhan Ergüder, Furkan Cengiz & Fatih Yıldız. (2023) Effects of build orientation and hatch spacing on high-speed milling behavior of L-PBF 316L stainless steel. Materials Testing 0:0.
Crossref
Crossref
Kun Zhou & Changjun Han. 2023. Metal Powder–Based Additive Manufacturing. Metal Powder–Based Additive Manufacturing
120
159
.
Kun Zhou & Changjun Han. 2023. Metal Powder–Based Additive Manufacturing. Metal Powder–Based Additive Manufacturing
75
119
.
Kun Zhou & Changjun Han. 2023. Metal Powder–Based Additive Manufacturing. Metal Powder–Based Additive Manufacturing
75
159
.
R. Raghu, P. Chandramohan, D. Pradeesh Kumar & Amar Singh. (2023) Structural Characterization and Strength Assessment of Laser Powder Bed Fusion Manufactured CM247LC Nickel Based Super Alloy. Journal of Materials Engineering and Performance.
Crossref
Crossref
S. Ashish Daniel & P. Suya Prem Anand. (2023) A New Approach to Estimate Unknown Process Parameters of Laser-Based Powder Bed Fusion: Printed SS316L Using Box–Behnken Method. Journal of Materials Engineering and Performance.
Crossref
Crossref
Weibo Huang & Yimin Zhang. (2022) Investigation on fatigue life prediction and reliability design of 304 stainless steel manufactured by laser metal deposition. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability 237:4, pages 823-835.
Crossref
Crossref
Timileyin David Oyedeji, Yangyiwei Yang, Herbert Egger & Bai-Xiang Xu. (2023) Variational quantitative phase-field modeling of nonisothermal sintering process. Physical Review E 108:2.
Crossref
Crossref
I.F. Ostrovski, A. Rabelo, S. Bodziak, J.C.G. Milan, F.H. Lafratta, V.L. Soethe Parucker & D.A. Duarte. (2023) Effect of the plasma nitriding on the mechanical properties of the 18Ni300 steel obtained by selective laser melting. Surface and Coatings Technology 466, pages 129688.
Crossref
Crossref
Bin Wu, Jingjing Liang, Yizhou Zhou, Yanhong Yang, Jinguo Li & Xiaofeng Sun. (2023) Investigation on tensile deformation and fracture behavior of a Ni-based superalloy specially designed for additive manufacturing. Materialia 30, pages 101828.
Crossref
Crossref
Hailong Cheng, Xinchun Luo & Xin Wu. (2023) Recent research progress on additive manufacturing of high-strength low-alloy steels: Focusing on the processing parameters, microstructures and properties. Materials Today Communications 36, pages 106616.
Crossref
Crossref
P. Landau, T. Saffar, I. Orion, O. Girshevitz & E. Tiferet. (2023) Helium bubble formation in additive manufactured L-PBF AlSi10Mg. Journal of Nuclear Materials 582, pages 154473.
Crossref
Crossref
Zhiguang Zhu, Zhiheng Hu, Hang Li Seet, Tingting Liu, Wenhe Liao, Upadrasta Ramamurty & Sharon Mui Ling Nai. (2023) Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications. International Journal of Machine Tools and Manufacture 190, pages 104047.
Crossref
Crossref
Jun Ge, Selvum Pillay & Haibin Ning. (2023) Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review. Journal of Materials Engineering and Performance 32:16, pages 7073-7122.
Crossref
Crossref
Federico Venturi & Robert Taylor. (2023) Additive Manufacturing in the Context of Repeatability and Reliability. Journal of Materials Engineering and Performance 32:15, pages 6589-6609.
Crossref
Crossref
Martin Švec, Pavel Solfronk, Iva Nováková, Jiří Sobotka & Jaromír Moravec. (2023) Comparison of the Structure, Mechanical Properties and Effect of Heat Treatment on Alloy Inconel 718 Produced by Conventional Technology and by Additive Layer Manufacturing. Materials 16:15, pages 5382.
Crossref
Crossref
Binquan Jin, Qing Wang, Lizhong Zhao, Anjian Pan, Xuefeng Ding, Wei Gao, Yufeng Song & Xuefeng Zhang. (2023) A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys. Metals 13:8, pages 1327.
Crossref
Crossref
Kudakwashe Nyamuchiwa, Robert Palad, Joan Panlican, Yuan Tian & Clodualdo AranasJr.Jr.. (2023) Recent Progress in Hybrid Additive Manufacturing of Metallic Materials. Applied Sciences 13:14, pages 8383.
Crossref
Crossref
Aurabinda Swain, M. Jegatheesan, Amman Jakhar, Prasenjit Rath & Anirban Bhattacharya. (2023) Numerical Model for Simulation of Melting and Microstructure Evolution during a Multi-layered Laser Melting Process. Journal of Materials Engineering and Performance.
Crossref
Crossref
Shengxuan Zhou, Shuo Yi, Xiaojie Du, Zhenlin Xu, Yinsheng He, Hui Zhang & Yizhu He. (2023) Corrosion Resistance Enhancement of Selective Laser Melted Cost‐Effective Interstitial Medium‐Entropy Alloy via Deep Cryogenic Treatment. Advanced Engineering Materials.
Crossref
Crossref
Peter Kozový, Michal Šajgalík, Mário Drbúl, Jozef Holubják, Jaromír Markovič & Richard Joch. (2023) Identification of Residual Stresses after Machining a Gearwheel Made by Sintering Metal Powder. Manufacturing Technology.
Crossref
Crossref
Fatih Akkoyun, Zihni Alp Cevik, Koray Ozsoy, Ali Ercetin & Ibrahim Arpaci. (2023) Image Processing Approach to Investigate the Correlation between Machining Parameters and Burr Formation in Micro-Milling Processes of Selective-Laser-Melted AISI 316L. Micromachines 14:7, pages 1376.
Crossref
Crossref
Amir Mostafaei, Reza Ghiaasiaan, I-Ting Ho, Seth Strayer, Kai-Chun Chang, Nima Shamsaei, Shuai Shao, Santanu Paul, An-Chou Yeh, Sammy Tin & Albert C. To. (2023) Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship. Progress in Materials Science 136, pages 101108.
Crossref
Crossref
Fei Wang, Le Kang, Shiqi Lin, Haozhou Tang & Tiechui Yuan. (2023) High compressive plasticity refractory medium entropy alloy fabricated by laser powder bed fusion using elemental blended powders. Materials Science and Engineering: A 880, pages 145363.
Crossref
Crossref
Zhonghua Li, Zezhou Kuai, Bin Liu, Yanlei Chen, Huodong Li, Yanyang Wang, Wenjuan Huo, Min Wei, Huirong Yang & Peikang Bai. (2023) Selective laser melting of 316L–CuCrZr bimetallic structure via IN718 transition layer. Journal of Materials Research and Technology 25, pages 3819-3834.
Crossref
Crossref
Chan Woong Park, Raj Narayan Hajra, Sung Hoon Kim, Se-Hwan Lee & Jeoung Han Kim. (2023) Optimizing multi-interlayered additive manufacturing for high strength robust joints in Inconel 718 and Ti–6Al–4V alloys. Journal of Materials Research and Technology 25, pages 855-872.
Crossref
Crossref
Y. Hong, D.D. Dong, G.P. Zou, Y. Li, S.S. Lin, T.C. Kuang, Y.Z. Wu & M.J. Dai. (2023) The corrosion response of the heterogeneous nitriding structure originated from the laser additive manufactured steel. Corrosion Science 218, pages 111188.
Crossref
Crossref
Qipeng Liu, Wen Li, Kun Yang, Yuehua Gao, Lei Wang & Xihua Chu. (2023) Analytical investigation into the powder distribution and laser beam-powder flow interaction in laser direct energy deposition with a continuous coaxial nozzle. Advanced Powder Technology 34:7, pages 104058.
Crossref
Crossref
Philipp Kürnsteiner, Pere Barriobero-Vila, Priyanshu Bajaj, Frédéric De Geuser, Markus B. Wilms, Eric A. Jägle & Dierk Raabe. (2023) Designing an Fe-Ni-Ti maraging steel tailor-made for laser additive manufacturing. Additive Manufacturing 73, pages 103647.
Crossref
Crossref
Steffen Czink, Victor Lubkowitz, Stefan Dietrich & Volker Schulze. (2023) Process development for the hybrid additive manufacturing of metallic structures on polymer substrates. Additive Manufacturing Letters 6, pages 100132.
Crossref
Crossref
M. V. Nadezhkin, D. V. Orlova & S. A. Barannikova. (2023) Study of Local Deformation in an Additively Manufactured Steel Composite. Russian Physics Journal 66:3, pages 307-313.
Crossref
Crossref
Muhammad Arif Mahmood, Asif Ur Rehman, M. Mustafa Azeem, Abedalkader Alkhouzaam & Marwan Khraisheh. (2023) On the development of part-scale FEM modeling for laser powder bed fusion of AISI 316L stainless steel with experimental verification. The International Journal of Advanced Manufacturing Technology 127:5-6, pages 2229-2255.
Crossref
Crossref
Yuan-Zhai Xu, Lin Zhang, Chong-Feng Shao, Qin-Wen Tan, Zhi-Gang Zang, Bing-Tian Lang, Zhong-Zheng Chen, Yan-Jie Song, Xiao-Jun Wang & Qin-Jun Peng. (2023) Multilevel synergically controlling wavefront correction of a high-power slab laser system. Applied Optics 62:17, pages 4618.
Crossref
Crossref
Tae-Geon Kim, Gwang-Yong Shin, Ki-Yong Lee & Do-Sik Shim. (2023) Study on Wear Behavior of 630 Stainless Steel Fabricated by Sequential Metal Additive Manufacturing (Powder Bed Fusion and Directed Energy Deposition). Journal of the Korean Society for Precision Engineering 40:6, pages 483-492.
Crossref
Crossref
Yuheng Liu, Kazufumi Nose, Masayuki Okugawa, Yuichiro Koizumi & Takayoshi Nakano. (2023) Fabrication and Process Monitoring of 316L Stainless Steel by Laser Powder Bed Fusion with µ-Helix Scanning Strategy and Narrow Scanning Line Intervals. MATERIALS TRANSACTIONS 64:6, pages 1135-1142.
Crossref
Crossref
Yuta Yanase, Hajime Miyauchi, Hiroaki Matsumoto & Kozo Yokota. (2023) Hierarchical Analysis of Phase Constituent and Mechanical Properties of AlSi10Mg/SiC Composite Produced by Laser-Based Powder Bed Fusion. MATERIALS TRANSACTIONS 64:6, pages 1125-1134.
Crossref
Crossref
Yingmeng Xiao, Guian Qian, Jingyu Sun, Filippo Berto, Jose A.F. Correia & Youshi Hong. (2023) Effects of temperature on tensile and fracture performance of Ti6Al4V alloy fabricated by laser powder bed fusion. Theoretical and Applied Fracture Mechanics 125, pages 103931.
Crossref
Crossref
Deyu Yue, Dongming Li, Xu Zhang, Bingzhi Chen, Ruixian Qin & Zhaoyi Wang. (2023) Tensile behavior of AlSi10Mg overhanging structures fabricated by laser powder bed fusion: Effects of support structures and build orientation. Materials Science and Engineering: A, pages 145375.
Crossref
Crossref
Qian Liu, Jiajun Lu, Zairan Luo, Jiang Yi, Minglin He, Yonghua Zhao & Shuai Wang. (2023) Enhancing corrosion resistance of additively manufactured 316L stainless steel by fabricating pillar arrays. Materials & Design 230, pages 111940.
Crossref
Crossref
Milad Hamidi Nasab, Maurizio Vedani, Roland E. Logé, Navid Sohrabi, Amir Mohammad Jamili, Anton du Plessis & Stefano Beretta. (2023) An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces. Materials Characterization 200, pages 112907.
Crossref
Crossref
Jingbo Liu, Yucheng Yang, Hong Wu, Yang Yang, Yaojia Ren, Qingge Wang, Solomon-Oshioker Agbedor, Xiaolan Wu, Yalin Lu, Yang Zhang & Ian Baker. (2023) Wear and corrosion of an additively-manufactured AlMgScZrMn alloy. Materials Characterization 200, pages 112829.
Crossref
Crossref
Seong Jun Park, Do Hyun Kim, Ho Gi Ju, Seong Je Park, Sukjoon Hong, Yong son & Il Hyuk Ahn. (2023) Increased interlayer bonding strength of short carbon fiber composite fabricated by material extrusion via warm isostatic pressing (WIP) process. Journal of Materials Research and Technology.
Crossref
Crossref
Yudong An, Shaoxian Zheng, Xuming Pang & Jibin Pu. (2023) Effect of laser remelting on copper‑nickel alloy coating prepared by extreme high-speed laser cladding. Journal of Manufacturing Processes 95, pages 497-507.
Crossref
Crossref
Gongwen Gan, Bangjian Yang, Xi Zhang, Zhongyin Zhu, Bing Chen & Guoqing Gou. (2023) Tuning the mechanical properties of powder bed fusion printed CoCrFeNiMn high-entropy alloys by annealing and hot isostatic pressing. Journal of Alloys and Compounds 946, pages 169376.
Crossref
Crossref
Qiang Wang, Jinlong Jia, Yue Zhao & Aiping Wu. (2023) In situ measurement of full-field deformation for arc-based directed energy deposition via digital image correlation technology. Additive Manufacturing 72, pages 103635.
Crossref
Crossref
Rui Xu & Wenguang Nan. (2023) Analysis of the metrics and mechanism of powder spreadability in powder-based additive manufacturing. Additive Manufacturing 71, pages 103596.
Crossref
Crossref
Lubin Song, Shulin Yuan, Lv Zhao, Yaxin Zhu, Shuang Liang, Minsheng Huang, Aude Simar & Zhenhuan Li. (2023) Deciphering phase stress partition and its correlation to mechanical anisotropy of laser powder bed fusion AlSi10Mg. Additive Manufacturing 71, pages 103594.
Crossref
Crossref
Displaying 200 of 2234 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list