Citations (642)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (160)
Guillaume Dessevre, Jacques Lamothe, Robert Pellerin, Maha Ben Ali, Pierre Baptiste & Vincent Pomponne. (2023) Comparison of pull management policies for a divergent process with DDMRP buffers: an industrial case study. International Journal of Production Research 61:23, pages 8022-8042.
Read now
Read now
Ahmed Gailan Qasem, Faisal Aqlan, Abdulrahman Shamsan & Mohammed Alhendi. (2023) A simulation-optimisation approach for production control strategies in perishable food supply chains. Journal of Simulation 17:2, pages 211-227.
Read now
Read now
Matthias Thürer, Nuno O. Fernandes, Stefan Haeussler & Mark Stevenson. (2023) Dynamic planned lead times in production planning and control systems: does the lead time syndrome matter?. International Journal of Production Research 61:4, pages 1268-1282.
Read now
Read now
S. Serhat Karakutuk & M. Arslan Ornek. (2023) A goal programming approach to lean production system implementation. Journal of the Operational Research Society 74:1, pages 403-416.
Read now
Read now
Marcello Braglia, Leonardo Marrazzini & Luca Padellini. (2022) COBACABANA: a real industrial application in a job shop system. Production Planning & Control 33:11, pages 1061-1077.
Read now
Read now
Safa Chabouh, Sondes Hammami, Eric Marcon & Hanen Bouchriha. (2022) A pull-strategy for the appointment scheduling of surgical patients in a hospital-integrated facility. Health Systems 11:3, pages 172-188.
Read now
Read now
Nuno O. Fernandes, Matthias Thürer & Mark Stevenson. (2022) Direct Workload Control: simplifying continuous order release. International Journal of Production Research 60:4, pages 1424-1437.
Read now
Read now
Mark L. Spearman, David L. Woodruff & Wallace J. Hopp. (2022) CONWIP Redux: reflections on 30 years of development and implementation. International Journal of Production Research 60:1, pages 381-387.
Read now
Read now
Andrea Grassi, Guido Guizzi, Liberatina Carmela Santillo & Silvestro Vespoli. (2021) Assessing the performances of a novel decentralised scheduling approach in Industry 4.0 and cloud manufacturing contexts. International Journal of Production Research 59:20, pages 6034-6053.
Read now
Read now
Philipp Neuner & Stefan Haeussler. (2021) Rule based workload control in semiconductor manufacturing revisited. International Journal of Production Research 59:19, pages 5972-5991.
Read now
Read now
Yann Jaegler, Anicia Jaegler, Fatima Zahra Mhada, Damien Trentesaux & Patrick Burlat. (2021) A new methodological support for control and optimization of manufacturing systems in the context of product customization. Journal of Industrial and Production Engineering 38:5, pages 341-355.
Read now
Read now
Gustavo Bagni, Moacir Godinho Filho, Matthias Thürer & Mark Stevenson. (2021) Systematic review and discussion of production control systems that emerged between 1999 and 2018. Production Planning & Control 32:7, pages 511-525.
Read now
Read now
Hermann Lödding & Christoph Koch. (2021) Value stream analysis and design for make-to-order companies. Production Planning & Control 32:4, pages 322-334.
Read now
Read now
Matthias Thürer, Nuno O. Fernandes, Mark Stevenson, Ting Qu & George Q. Huang. (2021) Self-Organizing Material Flow Control using Smart Products: An Assessment by Simulation. Journal of Industrial and Production Engineering 38:2, pages 148-156.
Read now
Read now
Nuno O. Fernandes, Matthias Thürer, Mark Stevenson & Sílvio Carmo-Silva. (2020) Lot synchronization in make-to-order shops with order release control: an assessment by simulation. International Journal of Production Research 58:21, pages 6724-6738.
Read now
Read now
Sandrine Dumoulinneuf, Lucile Faure, Anicia Jaegler, Anne-Lise Antomarchi & Patrick Burlat. (2020) Pilotage ConWip en contexte mixte MTO/MTS. Logistique & Management 28:2, pages 114-124.
Read now
Read now
Oladipupo Olaitan, Erlend Alfnes, Jørn Vatn & Jan Ola Strandhagen. (2019) CONWIP implementation in a system with cross-trained teams. International Journal of Production Research 57:20, pages 6473-6486.
Read now
Read now
Jersone Tasso Moreira Silva, Jose Humberto Ablanedo-Rosas & Dennys Eduardo Rossetto. (2019) A longitudinal literature network review of contributions made to the academy over the past 55 years of the IJPR. International Journal of Production Research 57:15-16, pages 4627-4653.
Read now
Read now
A.S. Xanthopoulos, G. Chnitidis & D.E. Koulouriotis. (2019) Reinforcement learning-based adaptive production control of pull manufacturing systems. Journal of Industrial and Production Engineering 36:5, pages 313-323.
Read now
Read now
Matthias Thürer, Nuno O. Fernandes, Mark Stevenson, Ting Qu & Cong Dong Li. (2019) Centralised vs. decentralised control decision in card-based control systems: comparing kanban systems and COBACABANA. International Journal of Production Research 57:2, pages 322-337.
Read now
Read now
Matthias Thürer, Nuno O. Fernandes, Nick Ziengs & Mark Stevenson. (2019) On the meaning of ConWIP cards: an assessment by simulation. Journal of Industrial and Production Engineering 36:1, pages 49-58.
Read now
Read now
Romain Miclo, Matthieu Lauras, Franck Fontanili, Jacques Lamothe & Steven A. Melnyk. (2019) Demand Driven MRP: assessment of a new approach to materials management. International Journal of Production Research 57:1, pages 166-181.
Read now
Read now
Vladimir Modrak & Zuzana Soltysova. (2018) Development of operational complexity measure for selection of optimal layout design alternative. International Journal of Production Research 56:24, pages 7280-7295.
Read now
Read now
Yann Jaegler, Anicia Jaegler, Patrick Burlat, Samir Lamouri & Damien Trentesaux. (2018) The ConWip production control system: a systematic review and classification. International Journal of Production Research 56:17, pages 5736-5757.
Read now
Read now
Yavuz A. Bozer & Francisco J. Aldarondo. (2018) A simulation-based comparison of two goods-to-person order picking systems in an online retail setting. International Journal of Production Research 56:11, pages 3838-3858.
Read now
Read now
Matthias Thürer & Mark Stevenson. (2018) On the beat of the drum: improving the flow shop performance of the Drum–Buffer–Rope scheduling mechanism. International Journal of Production Research 56:9, pages 3294-3305.
Read now
Read now
Rajesh Piplani & Alvin Wei Hern Ang. (2018) Performance comparison of multiple product kanban control systems. International Journal of Production Research 56:3, pages 1299-1312.
Read now
Read now
Tullio A.M. Tolio & Andrea Ratti. (2018) Performance evaluation of two-machine lines with generalized thresholds. International Journal of Production Research 56:1-2, pages 926-949.
Read now
Read now
Matthias Thürer, Ting Qu, Mark Stevenson, Cong Dong Li & George Q. Huang. (2017) Deconstructing bottleneck shiftiness: the impact of bottleneck position on order release control in pure flow shops. Production Planning & Control 28:15, pages 1223-1235.
Read now
Read now
Matthias Thürer, Nuno O. Fernandes, Mark Stevenson & Ting Qu. (2017) On the backlog-sequencing decision for extending the applicability of ConWIP to high-variety contexts: an assessment by simulation. International Journal of Production Research 55:16, pages 4695-4711.
Read now
Read now
Joshua Prakash & Jeng Feng Chin. (2017) Effects of inventory classifications on CONWIP system: a case study. Journal of Management Analytics 4:3, pages 296-320.
Read now
Read now
Guodong Huang, Jie Chen, Xiuli Wang, Yiqun Shi & Houping Tian. (2017) From loop structure to policy-making: a CONWIP design framework for hybrid flow shop control in one-of-a-kind production environment. International Journal of Production Research 55:12, pages 3374-3391.
Read now
Read now
You Li, Zhibin Jiang & Wenyou Jia. (2017) API-based two-dimensional dispatching decision-making approach for semiconductor wafer fabrication with operation due date–related objectives. International Journal of Production Research 55:1, pages 79-95.
Read now
Read now
Matthias Thürer & Mark Stevenson. (2016) Card-based delivery date promising in pure flow shops with order release control. International Journal of Production Research 54:22, pages 6798-6811.
Read now
Read now
Matthias Thürer, Mark Stevenson & Charles W. Protzman. (2016) Card-based production control: a review of the control mechanisms underpinning Kanban, ConWIP, POLCA and COBACABANA systems. Production Planning & Control 27:14, pages 1143-1157.
Read now
Read now
George Liberopoulos, Chrissoleon T. Papadopoulos, James MacGregor Smith, Horst Tempelmeier & Tullio Tolio. (2016) New developments in stochastic models of manufacturing and service operations. International Journal of Production Research 54:20, pages 6102-6104.
Read now
Read now
Jeong C. Seo, Yong H. Chung, Byung H. Kim & Sang C. Park. (2016) Backward capacity-filtering for electronics Fabs. Production Planning & Control 27:11, pages 925-933.
Read now
Read now
Guodong Huang, Jie Chen, Xiuli Wang & Yiqun Shi. (2016) An approach of designing CONWIP loop for assembly system in one-of-a-kind production environment. International Journal of Computer Integrated Manufacturing 29:7, pages 805-820.
Read now
Read now
PoTsang B. Huang, James C. Chen, Cheng-Wei Yu & Chih-Cheng Chen. (2016) Integration of simulation and neural network in forecasting the throughput for TFT-LCD colour filter fabs. International Journal of Computer Integrated Manufacturing 29:3, pages 298-308.
Read now
Read now
Andrew Manikas, Mahesh Gupta & Lynn Boyd. (2015) Experiential exercises with four production planning and control systems. International Journal of Production Research 53:14, pages 4206-4217.
Read now
Read now
Guodong Huang, Jie Chen, Xiuli Wang & Yiqun Shi. (2015) A simulation study of CONWIP assembly with multi-loop in mass production, multi-products and low volume and OKP environments. International Journal of Production Research 53:14, pages 4160-4175.
Read now
Read now
Yacob Khojasteh & Ryo Sato. (2015) Selection of a pull production control system in multi-stage production processes. International Journal of Production Research 53:14, pages 4363-4379.
Read now
Read now
Nur Amalina Muhammad, Jeng Feng Chin, Shahrul Kamarrudin, Mohd Azizi Chik & Joshua Prakash. (2015) Fundamental simulation studies of CONWIP in front-end wafer fabrication. Journal of Industrial and Production Engineering 32:4, pages 232-246.
Read now
Read now
John Darlington, Mark Francis, Pauline Found & Andrew Thomas. (2015) Design and implementation of a Drum-Buffer-Rope pull-system. Production Planning & Control 26:6, pages 489-504.
Read now
Read now
Moacir Godinho Filho, Artur Boschi, Antonio Freitas Rentes, Matthias Thurer & Thiago Moreno Bertani. (2015) Improving Hospital Performance by Use of Lean Techniques: An Action Research Project in Brazil. Quality Engineering 27:2, pages 196-211.
Read now
Read now
J. Prakash & J.F. Chin. (2015) Modified CONWIP systems: a review and classification. Production Planning & Control 26:4, pages 296-307.
Read now
Read now
Joshua Prakash & Jeng Feng Chin. (2014) Implementation of hybrid parallel kanban-CONWIP system: A case study. Cogent Engineering 1:1.
Read now
Read now
Mitchell A. Millstein & Joseph S. Martinich. (2014) Takt Time Grouping: implementing kanban-flow manufacturing in an unbalanced, high variation cycle-time process with moving constraints. International Journal of Production Research 52:23, pages 6863-6877.
Read now
Read now
You Li, Zhibin Jiang & Wenyou Jia. (2014) An integrated release and dispatch policy for semiconductor wafer fabrication. International Journal of Production Research 52:8, pages 2275-2292.
Read now
Read now
Egon Müller, Juri Tolujew & Florian Kienzle. (2014) Push-Kanban – a kanban-based production control concept for job shops. Production Planning & Control 25:5, pages 401-413.
Read now
Read now
J. Prakash & J.F. Chin. (2014) Comparison between production controls in multi-stage multi-product manufacturing environments: two case studies. Production & Manufacturing Research 2:1, pages 477-500.
Read now
Read now
Rodrigo Reyes Levalle, Manuel Scavarda & Shimon Y. Nof. (2013) Collaborative production line control: Minimisation of throughput variability and WIP. International Journal of Production Research 51:23-24, pages 7289-7307.
Read now
Read now
Paolo Renna, Luciano Magrino & Renato Zaffina. (2013) Dynamic card control strategy in pull manufacturing systems. International Journal of Computer Integrated Manufacturing 26:9, pages 881-894.
Read now
Read now
Massimo Bertolini, Marcello Braglia, Giovanni Romagnoli & Francesco Zammori. (2013) Extending value stream mapping: the synchro-MRP case. International Journal of Production Research 51:18, pages 5499-5519.
Read now
Read now
M.H. Aziz, Erik
L.J. Bohez, Roongrat Pisuchpen & Manukid Parnichkun. (2013) Petri Net model of repetitive push manufacturing with Polca to minimise value-added WIP. International Journal of Production Research 51:15, pages 4464-4483.
Read now
Read now
Stephan Biller, Semyon
M. Meerkov & Chao-Bo Yan. (2013) Raw material release rates to ensure desired production lead time in Bernoulli serial lines. International Journal of Production Research 51:14, pages 4349-4364.
Read now
Read now
Mozafar Saadat, Melissa
C.L. Tan, Mohammad Owliya & Guiovanni Jules. (2013) Challenges and trends in the allocation of the workforce in manufacturing shop floors. International Journal of Production Research 51:4, pages 1024-1036.
Read now
Read now
Sourish Sarkar & John
P. Shewchuk. (2013) Use of advance demand information in multi-stage production-inventory systems with multiple demand classes. International Journal of Production Research 51:1, pages 57-68.
Read now
Read now
W.L. Yeung. (2012) Agent-based manufacturing control based on distributed bid selection and publish-subscribe messaging: a simulation case study. International Journal of Production Research 50:22, pages 6339-6356.
Read now
Read now
N. Ziengs, J. Riezebos & R. Germs. (2012) Placement of effective work-in-progress limits in route-specific unit-based pull systems. International Journal of Production Research 50:16, pages 4358-4371.
Read now
Read now
K.K. Starkov, A.Y. Pogromsky & J.E. Rooda. (2012) Performance analysis for tandem manufacturing lines under variable structure production control method. International Journal of Production Research 50:8, pages 2363-2375.
Read now
Read now
Shahram Taj, Galia Novakova Nedeltcheva, George Pfeil & Michael Roumaya. (2012) A spread-sheet model for efficient production and scheduling of a manufacturing line/cell. International Journal of Production Research 50:4, pages 1141-1154.
Read now
Read now
Y.T. Tai, W.L. Pearn & J.H. Lee. (2012) Cycle time estimation for semiconductor final testing processes with Weibull-distributed waiting time. International Journal of Production Research 50:2, pages 581-592.
Read now
Read now
Amos
H.C. Ng, Jacob Bernedixen & Anna Syberfeldt. (2012) A comparative study of production control mechanisms using simulation-based multi-objective optimisation. International Journal of Production Research 50:2, pages 359-377.
Read now
Read now
Shiqing Yao, Zhibin Jiang, Na Li, Na Geng & Xiao Liu. (2011) A decentralised multi-objective scheduling methodology for semiconductor manufacturing. International Journal of Production Research 49:24, pages 7227-7252.
Read now
Read now
Kung-Jeng Wang, Chun-Chih Chiu, D.C. Gong & T.C. Hou. (2011) An efficient job-releasing strategy for semiconductor turnkey factory. Production Planning & Control 22:7, pages 660-675.
Read now
Read now
M. Di Mascolo & J.-M. Bollon. (2011) Use of path algebra tools for a unified description of a large class of pull control policies. International Journal of Production Research 49:3, pages 611-636.
Read now
Read now
L Mönch, J Zimmermann, S J Mason & J W Fowler. (2011) Multiple orders per job formation and release strategies in large-scale wafer fabs: a simulation study. Journal of Simulation 5:1, pages 25-43.
Read now
Read now
Jing-Wen Li. (2011) Comparing Kanban with CONWIP in a make-to-order environment supported by JIT practices. Journal of the Chinese Institute of Industrial Engineers 28:1, pages 72-88.
Read now
Read now
Seonmin Kim, James F. Cox & Victoria J. Mabin. (2010) An exploratory study of protective inventory in a re-entrant line with protective capacity. International Journal of Production Research 48:14, pages 4153-4178.
Read now
Read now
Doraid Dalalah & Omar Al-Araidah. (2010) Dynamic decentralised balancing of CONWIP production systems. International Journal of Production Research 48:13, pages 3925-3941.
Read now
Read now
De-bi Cao, Yong Yin & Ikou Kaku. (2010) A criterion of production model selection for building material with delivery delay. International Journal of Production Research 48:12, pages 3429-3443.
Read now
Read now
D.E. Koulouriotis, A.S. Xanthopoulos & V.D. Tourassis. (2010) Simulation optimisation of pull control policies for serial manufacturing lines and assembly manufacturing systems using genetic algorithms. International Journal of Production Research 48:10, pages 2887-2912.
Read now
Read now
R. Germs & J. Riezebos. (2010) Workload balancing capability of pull systems in MTO production. International Journal of Production Research 48:8, pages 2345-2360.
Read now
Read now
MandyamM. Srinivasan & S. Viswanathan. (2010) Optimal work-in-process inventory levels for high-variety, low-volume manufacturing systems. IIE Transactions 42:6, pages 379-391.
Read now
Read now
Jan Riezebos. (2010) Design of POLCA material control systems. International Journal of Production Research 48:5, pages 1455-1477.
Read now
Read now
PedroL. Gonzalez-R, Jose M. Framinan & Rafael Ruiz-Usano. (2010) A multi-objective comparison of dispatching rules in a drum–buffer–rope production control system. International Journal of Computer Integrated Manufacturing 23:2, pages 155-167.
Read now
Read now
Jing-Wen Li. (2010) Simulation study of coordinating layout change and quality improvement for adapting job shop manufacturing to CONWIP control. International Journal of Production Research 48:3, pages 879-900.
Read now
Read now
Michael Masin & Vittal Prabhu. (2009) AWIP: A simulation-based feedback control algorithm for scalable design of self-regulating production control systems. IIE Transactions 41:2, pages 120-133.
Read now
Read now
Qing Liu & Dao Huang. (2009) Dynamic card number adjusting strategy in card-based production system. International Journal of Production Research 47:21, pages 6037-6050.
Read now
Read now
Jannes Slomp, Jos A.C. Bokhorst & Remco Germs. (2009) A lean production control system for high-variety/low-volume environments: a case study implementation. Production Planning & Control 20:7, pages 586-595.
Read now
Read now
David Claudio & Ananth Krishnamurthy. (2009) Kanban-based pull systems with advance demand information. International Journal of Production Research 47:12, pages 3139-3160.
Read now
Read now
B.K. Choi & J.C. Seo. (2009) Capacity-filtering algorithms for finite-capacity planning of a flexible flow line. International Journal of Production Research 47:12, pages 3363-3386.
Read now
Read now
Nasim Nahavandi. (2009) CWIPL II, a mechanism for improving throughput and lead time in unbalanced flow line. International Journal of Production Research 47:11, pages 2921-2941.
Read now
Read now
N. Maggio, A. Matta, S.B. Gershwin & T. Tolio. (2009) A decomposition approximation for three-machine closed-loop production systems with unreliable machines, finite buffers and a fixed population. IIE Transactions 41:6, pages 562-574.
Read now
Read now
Pedro L. González-R & Jose M. Framinan. (2009) The pull evolution: from Kanban to customised token-based systems. Production Planning & Control 20:3, pages 276-287.
Read now
Read now
Velusamy Subramaniam, Yang Rongling, Chen Ruifeng & Surya Prakash Singh. (2009) A WIP control policy for tandem lines. International Journal of Production Research 47:4, pages 1127-1149.
Read now
Read now
Chao Qi, Appa Iyer Sivakumar & Stanley B. Gershwin. (2009) An efficient new job release control methodology. International Journal of Production Research 47:3, pages 703-731.
Read now
Read now
Qiguo Gong, Shouyang Wang & K. K LAi. (2009) Stochastic analysis of TPS: expose and eliminate variability by highly specifying WCP. International Journal of Production Research 47:3, pages 751-775.
Read now
Read now
S. Ioannidis & V. S. Kouikoglou. (2008) Revenue management in single-stage CONWIP production systems. International Journal of Production Research 46:22, pages 6513-6532.
Read now
Read now
Dominique Perdaen, Dieter Armbruster, Karl Kempf & Erjen Lefeber. (2008) Controlling a re-entrant manufacturing line via the push–pull point. International Journal of Production Research 46:16, pages 4521-4536.
Read now
Read now
Muh-Cherng Wu, Shau-Jie Chiou & Chen-Fu Chen. (2008) Dispatching for make-to-order wafer fabs with machine-dedication and mask set-up characteristics. International Journal of Production Research 46:14, pages 3993-4009.
Read now
Read now
N. Bahaji & M. E. Kuhl. (2008) A simulation study of new multi-objective composite dispatching rules, CONWIP, and push lot release in semiconductor fabrication. International Journal of Production Research 46:14, pages 3801-3824.
Read now
Read now
H. Jodlbauer & A. Huber. (2008) Service-level performance of MRP, kanban, CONWIP and DBR due to parameter stability and environmental robustness. International Journal of Production Research 46:8, pages 2179-2195.
Read now
Read now
H. Jodlbauer. (2008) A time-continuous analytic production model for service level, work in process, lead time and utilization. International Journal of Production Research 46:7, pages 1723-1744.
Read now
Read now
Kumar Satyam & Ananth Krishnamurthy. (2008) Performance evaluation of a multi-product system under CONWIP control. IIE Transactions 40:3, pages 252-264.
Read now
Read now
B. Lee, Y. H. Lee, T. Yang & J. Ignisio. (2008) A due-date based production control policy using WIP balance for implementation in semiconductor fabrications. International Journal of Production Research 46:20, pages 5515-5529.
Read now
Read now
Katsuhiko Takahashi, Katsumi Morikawa & Ying-Chuan Chen. (2007) Comparing kanban control with the theory of constraints using Markov chains. International Journal of Production Research 45:16, pages 3599-3617.
Read now
Read now
Mohammad Mehdi Sepehri & Nasim Nahavandi. (2007) Critical WIP loops: a mechanism for material flow control in flow lines. International Journal of Production Research 45:12, pages 2759-2773.
Read now
Read now
Pyung-Hoi Koo, Robert Bulfin & Shie-Gheun Koh. (2007) Determination of batch size at a bottleneck machine in manufacturing systems. International Journal of Production Research 45:5, pages 1215-1231.
Read now
Read now
Kyung Hwan Kang & Young Hoon Lee. (2007) Make-to-order scheduling in foundry semiconductor fabrication. International Journal of Production Research 45:3, pages 615-630.
Read now
Read now
L. Wang & V. Prabhu. (2006) Parallel algorithm for setting WIP levels for multi-product CONWIP systems. International Journal of Production Research 44:21, pages 4681-4693.
Read now
Read now
Y. H. Lee, S. Chung, B. Lee & K. H. Kang. (2006) Supply chain model for the semiconductor industry in consideration of manufacturing characteristics. Production Planning & Control 17:5, pages 518-533.
Read now
Read now
H. Jodlbauer
. (2005) Range, work in progress and utilization. International Journal of Production Research 43:22, pages 4771-4786.
Read now
Read now
Abraham Grosfeld-Nir & Michael Magazine
. (2005) A simulation study of pull systems with ascending/descending buffers and stochastic processing times. International Journal of Production Research 43:17, pages 3529-3541.
Read now
Read now
H.-P. Hsu & C.-T. Su
. (2005) The implementation of an activity-based costing collaborative planning system for semiconductor backend production. International Journal of Production Research 43:12, pages 2473-2492.
Read now
Read now
S.-H. Chung
, W. L. Pearn & H.-Y. Kang. (2005) Control wafers inventory management in the wafer fabrication photolithography area. Production Planning & Control 16:3, pages 286-296.
Read now
Read now
M. Stevenson
, L. C. Hendry & B. G. Kingsman
. (2005) A review of production planning and control: the applicability of key concepts to the make-to-order industry. International Journal of Production Research 43:5, pages 869-898.
Read now
Read now
MICHAEL MASIN, YALET. HERER & EZEYM. DAR-EL. (2005) Design of self-regulating production control systems by Tradeoffs Programming. IIE Transactions 37:3, pages 217-232.
Read now
Read now
Sarah M. Ryan
& Jumpol Vorasayan. (2005) Allocating work in process in a multiple-product CONWIP system with lost sales. International Journal of Production Research 43:2, pages 223-246.
Read now
Read now
W. Masuchun, S. Davis
& J. W. Patterson. (2004) Comparison of push and pull control strategies for supply network management in a make-to-stock environment. International Journal of Production Research 42:20, pages 4401-4419.
Read now
Read now
S.-G. Koh & R. L. Bulfin. (2004) Comparison of DBR with CONWIP in an unbalanced production line with three stations. International Journal of Production Research 42:2, pages 391-404.
Read now
Read now
Katsuhiko Takahashi. (2003) Comparing reactive Kanban systems
. International Journal of Production Research 41:18, pages 4317-4337.
Read now
Read now
JoseM. Framinan, PedroL. González & Rafael Ruiz-Usano. (2003) The CONWIP production control system: Review and research issues. Production Planning & Control 14:3, pages 255-265.
Read now
Read now
S. Kim, K. R. Davis & J. F. Cox$suffix/text()$suffix/text(). (2003) Investigation of flow mechanisms in semiconductor wafer fabrication. International Journal of Production Research 41:4, pages 681-698.
Read now
Read now
Katsuhiko Takahashi & Nobuto Nakamura. (2002) Comparing reactive Kanban and reactive CONWIP. Production Planning & Control 13:8, pages 702-714.
Read now
Read now
John W Fowler, Gary L Hogg & Scott J Mason. (2002) Workload control in the semiconductor industry. Production Planning & Control 13:7, pages 568-578.
Read now
Read now
S. T Enns & Myriam Prongué Costa. (2002) The effectiveness of input control based on aggregate versus bottleneck work loads. Production Planning & Control 13:7, pages 614-624.
Read now
Read now
R Cigolini & A Portioli-Staudacher. (2002) An experimental investigation on workload limiting methods within ORR policies in a job shop environment. Production Planning & Control 13:7, pages 602-613.
Read now
Read now
Young
Hoon Lee & Taeheon Kim. (2002) Manufacturing cycle time reduction using balance control in the semiconductor fabrication line. Production Planning & Control 13:6, pages 529-540.
Read now
Read now
GEORGE LIBEROPOULOS & YVES DALLERY. (2002) Base stock versus WIP cap in single-stage make-to-stock production-inventory systems. IIE Transactions 34:7, pages 627-636.
Read now
Read now
Göran Svensson. (2002) Dyadic Vulnerability in Companies' Inbound and Outbound Logistics Flows. International Journal of Logistics Research and Applications 5:1, pages 13-43.
Read now
Read now
YOUNGHOON LEE, JONGKWAN PARK & SOOYOUNG KIM. (2002) Experimental study on input and bottleneck scheduling for a semiconductor fabrication line. IIE Transactions 34:2, pages 179-190.
Read now
Read now
JoseM. Framinan & Rafael Ruiz-Usano. (2002) On transforming job-shops into flow-shops. Production Planning & Control 13:2, pages 166-174.
Read now
Read now
J. Wayne Patterson, LawrenceD. Fredendall & ChristopherW. Craighead. (2002) The impact of non-bottleneck variation in a manufacturing cell. Production Planning & Control 13:1, pages 76-85.
Read now
Read now
B. Baynat, J. A. Buzacott & Y. Dallery. (2002) Multiproduct Kanban-like Control Systems. International Journal of Production Research 40:16, pages 4225-4255.
Read now
Read now
Oliver Holthaus & Chandrasekharan Rajendran. (2002) A study on the performance of scheduling rules in buffer-constrained dynamic flowshops. International Journal of Production Research 40:13, pages 3041-3052.
Read now
Read now
José Mireles$suffix/text()$suffix/text(), FrankL. Lewis & Ayla Gürel. (2002) Deadlock avoidance for manufacturing multipart re-entrant flow lines using a matrix-based discrete event controller. International Journal of Production Research 40:13, pages 3139-3166.
Read now
Read now
Abraham Grosfeld-Nir & Michael Magazine. (2002) Gated MaxWIP: A strategy for controlling multistage production systems. International Journal of Production Research 40:11, pages 2557-2567.
Read now
Read now
Senthil Sowrirajan & F. Fred Choobineh. (2001) A Dynamic AGV Dispatcher for a C-CONWIP Controlled Job Shop. Journal of Design and Manufacturing Automation 1:1-2, pages 81-105.
Read now
Read now
TAYFUR ALTIOK & BENJAMIN MELAMED. (2001) The case for modeling correlation in manufacturing systems. IIE Transactions 33:9, pages 779-791.
Read now
Read now
Sheng-Hung Chang, Kelvin Chang & Rong-Kwei Li. (2001) A COMBINED SHOP FLOW CONTROL METHOD FOR THE WAFER FABRICATION FACTORIES. Journal of the Chinese Institute of Industrial Engineers 18:4, pages 59-72.
Read now
Read now
CARLOSD. PATERNINA-ARBOLEDA & TAPASK. DAS. (2001) Intelligent dynamic control policies for serial production lines. IIE Transactions 33:1, pages 65-77.
Read now
Read now
STANLEYB. GERSHWIN. (2000) Design and operation of manufacturing systems: the control-point policy. IIE Transactions 32:10, pages 891-906.
Read now
Read now
SARAHM. RYAN, BRUNO BAYNAT & F. FRED CHOOBINEH. (2000) Determining inventory levels in a CONWIP controlled job shop. IIE Transactions 32:2, pages 105-114.
Read now
Read now
B. GOLANY, E.M. DAR-EL & N. ZEEV. (1999) Controlling shop floor operations in a multi-family, multi-cell manufacturing environment through constant work-in-process. IIE Transactions 31:8, pages 771-781.
Read now
Read now
E.M. DAR-EL, Y.T. HERER & M. MASIN. (1999) CONWIP-based production lines with multiple bottlenecks: performance and design implications. IIE Transactions 31:2, pages 99-111.
Read now
Read now
Shu-Hsing Chung & Hung-Wen Huang. (1999) 晶圓製造廠生產作業控制策略之設計. Journal of the Chinese Institute of Industrial Engineers 16:1, pages 93-113.
Read now
Read now
ANAND IYER & RONALDG. ASKIN. (1998) Modeling and simulating operating policies for manufacturing cells. IIE Transactions 30:9, pages 785-794.
Read now
Read now
IZAK DUENYAS & PRAYOON PATANA-ANAKE. (1998) Base-stock control for single-product tandem make-to-stock systems. IIE Transactions 30:1, pages 31-39.
Read now
Read now
S. GSTETTNER & H. KUHN‡. (1996) Analysis of production control systems kanban and CONWIP. International Journal of Production Research 34:11, pages 3253-3273.
Read now
Read now
Jishnu Hazra & Abraham Seidmann. (1996) Performance Evaluation of Closed Tree-Structured Assembly Systems. IIE Transactions 28:7, pages 591-599.
Read now
Read now
K. VENKATESH, M.-C. ZHOU, M. KAIGHOBADI & R. CAUDILL. (1996) A Petri net approach to investigating push and pull paradigms in flexible factory automated systems. International Journal of Production Research 34:3, pages 595-620.
Read now
Read now
S. T. ENNS. (1995) An integrated system for controlling shop loading and work flow. International Journal of Production Research 33:10, pages 2801-2820.
Read now
Read now
ROBERTJ. GRAVES, JOHNM. KONOPKA & R.
JOHN MILNE. (1995) Literature review of material flow control mechanisms. Production Planning & Control 6:5, pages 395-403.
Read now
Read now
S. LINGAYAT, J. MITTENTHAL & R. M. O'KEEFE. (1995) An order release mechanism for a flexible flow system. International Journal of Production Research 33:5, pages 1241-1256.
Read now
Read now
JOHNA. MUCKSTADT & SRIDHARR. TAYUR. (1995) A comparison of alternative kanban control mechanisms. I. Background and structural results. IIE Transactions 27:2, pages 140-150.
Read now
Read now
DAVID JACOBS & SEMYONM. MEERKOV. (1995) A system-theoretic property of serial production lines: improvability. International Journal of Systems Science 26:4, pages 755-785.
Read now
Read now
X. CHAO, S. K. DAS & P. NAGENDRA. (1995) Prioritization of kanbans in the case of a single station serving multiple downstream stations. International Journal of Production Research 33:2, pages 377-389.
Read now
Read now
S. B. BAHOUTH & B. L. FOOTE. (1994) Managing a two-bottleneck job shop with a two-machine flow shop algorithm. International Journal of Production Research 32:10, pages 2463-2477.
Read now
Read now
REHA UZSOY, CHUNG-YEE LEE & LOUISA. MARTIN-VEGA. (1994) A REVIEW OF PRODUCTION PLANNING AND SCHEDULING MODELS IN THE SEMICONDUCTOR INDUSTRY PART II: SHOP-FLOOR CONTROL. IIE Transactions 26:5, pages 44-55.
Read now
Read now
T.-M. CHANG & Y. YIH. (1994) Determining the number of kanbans and lotsizes in a generic kanban system: a simulated annealing approach. International Journal of Production Research 32:8, pages 1991-2004.
Read now
Read now
I. DUENYAS. (1994) Estimating the throughput of a cyclic assembly system. International Journal of Production Research 32:6, pages 1403-1419.
Read now
Read now
T. M. CHANG & Y. YIH. (1994) Generic kanban systems for dynamic environments. International Journal of Production Research 32:4, pages 889-902.
Read now
Read now
K. L. DONOHUE & M. L. SPEARMAN. (1993) Improving the design of stochastic production lines: an approach using perturbation analysis. International Journal of Production Research 31:12, pages 2789-2806.
Read now
Read now
S. L. JOHNS & B. HON. (1993) Control mechanisms for stable lead times. International Journal of Production Research 31:2, pages 429-441.
Read now
Read now
DINGWEI WANG & THOMJ. HODGSON. (1992) Computation reduction for a large-scale Markov process model to analyse multistage production systems. International Journal of Production Research 30:10, pages 2411-2420.
Read now
Read now
IZAK DUENYAS & WALLACEJ. HOPP. (1992) CONWIP ASSEMBLY WITH DETERMINISTIC PROCESSING AND RANDOM OUTAGES. IIE Transactions 24:4, pages 97-109.
Read now
Read now
LARRYM. RODERICK, DONT. PHILLIPS & GARYL. HOGG. (1992) A comparison of order release strategies in production control systems. International Journal of Production Research 30:3, pages 611-626.
Read now
Read now
WALLACEJ. HOPP & MARKL. SPEARMAN. (1991) Throughput of a constant work in process manufacturing line subject to failures. International Journal of Production Research 29:3, pages 635-655.
Read now
Read now
Articles from other publishers (482)
Abhijit Gosavi & Aparna A. Gosavi. (2024) CONWIP control in the digitized world: The case of the cyber-physical jobshop. International Journal of Production Economics 270, pages 109169.
Crossref
Crossref
Aruna Prabhu, K Raghunandana & P Yogesh Pai. (2024) Workload Control in Flow Shops with Bottleneck Shifting and Process Time Variability. Production Engineering Archives 30:1, pages 48-56.
Crossref
Crossref
Aruna Prabhu, K Raghunandana, Pai P Yogesh & Augustine B.V. Barboza. (2024) Investigation of Workload Control Methods for Shops with Re-Entrant Flows. Management Systems in Production Engineering 32:1, pages 145-155.
Crossref
Crossref
Matthias Thürer, Nuno O. Fernandes, Hermann Lödding & Mark Stevenson. (2024) Material flow control in make-to-stock production systems: an assessment of order generation, order release and production authorization by simulation. Flexible Services and Manufacturing Journal.
Crossref
Crossref
Ping Chong Chua, Seung Ki Moon, Yen Ting Ng & Huey Yuen Ng. 2024. Digital Manufacturing. Digital Manufacturing
213
245
.
Hermann Lödding. 2019. Handbuch Logistik. Handbuch Logistik
1
21
.
Minwei Huang, Li Li & Qingyun Yu. (2023) Chaotic-Analysis-Based Optimization of Release Policies for Re-entrant Manufacturing Systems. Chaotic-Analysis-Based Optimization of Release Policies for Re-entrant Manufacturing Systems.
Khouloud Elloumi, Chaouki Saidi & Mounir Benaissa. (2023) Design of a fuzzy controller for intelligent control of an adaptive ConWIP system. Design of a fuzzy controller for intelligent control of an adaptive ConWIP system.
Felix Paschko, Steffi Knorn, Abderrahim Krini & Markus Kemke. (2023) Material flow control in Remanufacturing Systems with random failures and variable processing times. Journal of Remanufacturing 13:2, pages 161-185.
Crossref
Crossref
Kürşat YILDIZ, Volkan BAŞARAN & Mehmet Akif YERLİKAYA. (2023) Lojistikte İtme-Çekme Stratejisinin Önceliklendirilmesinde Bütünleşik Yöntem Önerisi: İzmir Alsancak Limanı ile Kemalpaşa Lojistik Üssü ÖrneğiIntegrated Method Proposal for Prioritizing Push-Pull Strategy in Logistics: The Example of İzmir Alsancak Port And Kemalpaşa Logistics Center. İnsan ve Toplum Bilimleri Araştırmaları Dergisi 12:2, pages 819-844.
Crossref
Crossref
Latifa Benhamou, Samir Lamouri, Patrick Burlat & Vincent Giard. (2023) Digital Twin: An Added Value for Digital CONWIP in the Context of Industry 4.0. Sustainability 15:13, pages 9874.
Crossref
Crossref
Theodor Freiheit. (2023) A discrete state Markov chain model and decomposition solution method for the transient behaviour of buffered long serial transfer lines. Journal of Manufacturing Systems 68, pages 493-507.
Crossref
Crossref
Stefan Haeussler, Philipp Neuner & Matthias Thürer. (2022) Balancing earliness and tardiness within workload control order release: an assessment by simulation. Flexible Services and Manufacturing Journal 35:2, pages 487-508.
Crossref
Crossref
Narpat Ram Sangwa & Kuldip Singh Sangwan. (2022) Leanness assessment of a complex assembly line using integrated value stream mapping: a case study. The TQM Journal 35:4, pages 893-923.
Crossref
Crossref
Rafael Diaz & Ali Ardalan. (2023) Innovating in data-driven production environments: simulation analysis of Net-CONWIP priority rule. Industrial Management & Data Systems 123:5, pages 1569-1598.
Crossref
Crossref
Silvestro Vespoli, Andrea Grassi, Guido Guizzi & Valentina Popolo. (2023) Generalised Performance Estimation in Novel Hybrid MPC Architectures: Modeling the CONWIP Flow-Shop System. Applied Sciences 13:8, pages 4808.
Crossref
Crossref
T.A. Arno Kasper, Martin J. Land & Ruud H. Teunter. (2023) Non-hierarchical work-in-progress control in manufacturing. International Journal of Production Economics 257, pages 108768.
Crossref
Crossref
Federica Costa, Kaustav Kundu, Matteo Rossini & Alberto Portioli-Staudacher. (2022) Comparative study of bottleneck-based release models and load-based ones in a hybrid MTO-MTS flow shop: an assessment by simulation. Operations Management Research 16:1, pages 33-48.
Crossref
Crossref
Li Li, Qingyun Yu, Kuo-Yi Lin, Yumin Ma & Fei QiaoLi Li, Qingyun Yu, Kuo-Yi Lin, Yumin Ma & Fei Qiao. 2023. Data-Driven Scheduling of Semiconductor Manufacturing Systems. Data-Driven Scheduling of Semiconductor Manufacturing Systems
135
182
.
Matthias Thürer, Shan Shan Li, Can Yang, Ting Qu & George Q. Huang. 2023. Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures. Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures
649
661
.
Guido Vinci Carlavan & Daniel Alejandro Rossit. 2023. Intelligent and Transformative Production in Pandemic Times. Intelligent and Transformative Production in Pandemic Times
573
581
.
Xiuli Wu, Xiaoyan Yan & Ling Wang. (2022) Optimizing job release and scheduling jointly in a reentrant hybrid flow shop. Expert Systems with Applications 209, pages 118278.
Crossref
Crossref
Sameer Prasad, Jason Woldt, Harish Borra & Nezih Altay. (2020) Migrant supply chain networks: an empirically based typology. Annals of Operations Research 319:1, pages 1331-1358.
Crossref
Crossref
David J. Eckman, Matthew Plumlee & Barry L. Nelson. (2022) Plausible Screening Using Functional Properties for Simulations with Large Solution Spaces. Operations Research 70:6, pages 3473-3489.
Crossref
Crossref
Nuno O. Fernandes, Matthias Thürer, Mark Stevenson & Silvio Carmo-Silva. (2022) Improving Urgency-Based Backlog Sequencing of Jobs: An Assessment by Simulation. Machines 10:10, pages 935.
Crossref
Crossref
Manuel Tomé De Andrade e Silva & Américo Azevedo. (2022) Self-adapting WIP parameter setting using deep reinforcement learning. Computers & Operations Research 144, pages 105854.
Crossref
Crossref
Panagiotis D. Paraschos, Alexandros S. Xanthopoulos, Georgios K. Koulinas & Dimitrios E. Koulouriotis. (2022) Machine learning integrated design and operation management for resilient circular manufacturing systems. Computers & Industrial Engineering 167, pages 107971.
Crossref
Crossref
Guido Vinci-Carlavan & Daniel Alejandro Rossit. (2022) Personalized production in Industry 4.0: a CONWIP approach. Personalized production in Industry 4.0: a CONWIP approach.
Fernando José Gómez Paredes, Moacir Godinho Filho, Matthias Thürer, Nuno O. Fernandes & Charbel José Chiappeta Jabbour. (2020) Factors for choosing production control systems in make-to-order shops: a systematic literature review. Journal of Intelligent Manufacturing 33:3, pages 639-674.
Crossref
Crossref
Silvestro Vespoli, Guido Guizzi, Elisa Gebennini & Andrea Grassi. (2021) A novel throughput control algorithm for semi-heterarchical industry 4.0 architecture. Annals of Operations Research 310:1, pages 201-221.
Crossref
Crossref
Anne-Lise Dumoutier, Jérôme Lions & Patrick Burlat. (2022) Les apports du Jumeau Numérique pour le pilotage en flux tiré Conwip. Revue Française de Gestion Industrielle 36:1, pages 112-123.
Crossref
Crossref
Jon Lerche, Peter EnevoldsenOlli Seppänen. (2022) Application of Takt and Kanban to Modular Wind Turbine Construction. Journal of Construction Engineering and Management 148:2.
Crossref
Crossref
Nataša Tošanović & Nedeljko Štefanić. (2022) Influence of Bottleneck on Productivity of Production Processes Controlled by Different Pull Control Mechanisms. Applied Sciences 12:3, pages 1395.
Crossref
Crossref
Chen-Yang Cheng, Shu-Fen Li, Chia-Leng Lee, Ranon Jientrakul & Chumpol Yuangyai. (2022) A Comparative Study of Unbalanced Production Lines Using Simulation Modeling: A Case Study for Solar Silicon Manufacturing. Sustainability 14:2, pages 697.
Crossref
Crossref
Sebastian Eberlein & Michael Freitag. (2022) A pull principle for the material supply of low-volume mixed-model assembly lines. Procedia CIRP 107, pages 1385-1390.
Crossref
Crossref
S. Carmo-Silva, Matthias Thürer, Fernando J. Gómez, Moacir Godinho Filho & Nuno O. Fernandes. (2022) Materials Flow Control in Multi-cell Manufacturing Systems: The C-CONWIP System. IFAC-PapersOnLine 55:10, pages 2294-2299.
Crossref
Crossref
Xiaoyan Yan & Xiuli Wu. (2022) IMOEA/D to optimize job release problem for a reentrant hybrid flow shop. Computers & Industrial Engineering 163, pages 107800.
Crossref
Crossref
Mesut Ulu & Semra Birgün. 2022. Digitizing Production Systems. Digitizing Production Systems
347
356
.
Nataša Tošanović & Nedeljko Štefanić. (2021) Evaluation of Pull Production Control Mechanisms by Simulation. Processes 10:1, pages 5.
Crossref
Crossref
S. Eberlein, S. Schukraft & M. Freitag. (2021) Simulation-based Design of a Pull Material Supply System for Low Volume Unpaced Assembly Lines: A Case Study in the Aerospace Industry. Simulation-based Design of a Pull Material Supply System for Low Volume Unpaced Assembly Lines: A Case Study in the Aerospace Industry.
Displaying 200 of 642 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list