Advanced search
Publication Cover
Materials Research Letters Volume 2, 2014 - Issue 4
Submit an article Journal homepage
12,705
Views
415
CrossRef citations to date
0
Altmetric
Original Reports

Synergetic Strengthening by Gradient Structure

X. L. WuState Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing100190, People's Republic of ChinaCorrespondence[email protected]
,
P. JiangState Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing100190, People's Republic of China
,
L. ChenState Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing100190, People's Republic of China
,
J. F. ZhangState Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing100190, People's Republic of China
,
F. P. YuanState Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing100190, People's Republic of China
&
Y. T. ZhuDepartment of Materials Science and Engineering, North Carolina State University, Raleigh, NC27695, USA;School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing210094, People's Republic of ChinaCorrespondence[email protected]
Pages 185-191 | Received 02 Apr 2014, Accepted 12 Jun 2014, Published online: 02 Jul 2014

Citations (415)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (28)

Jie Kuang, Xiaolong Zhao, Xinpeng Du, Jinyu Zhang, Gang Liu, Jun Sun, Guangming Xu & Zhaodong Wang. (2023) Ductilizing Al-Mn strips via gradient texture. Materials Research Letters 11:6, pages 430-438.
Read now
Liangliang Yuan, Mingxing Guo, Dexian Qiao, Zanyang Liu & Linzhong Zhuang. (2023) Super-high formability of Al-5.0Zn-1.5Mg-1.5Cu (wt.%) alloy via gradient heterogeneous structure. Materials Research Letters 11:2, pages 99-107.
Read now
X. X. Dong, Y. F. Shen & Y. T. Zhu. (2023) Moderating strain hardening rate to produce high ductility and high strength in a medium carbon TRIP steel. Materials Research Letters 11:1, pages 69-75.
Read now
Khaled F. Adam & David P. Field. (2022) Developing novel heterogenous microstructures to balance between strength and ductility without restoration processes in commercial Al alloys. Mechanics of Advanced Materials and Structures 29:16, pages 2371-2379.
Read now
Behzad Sadeghi, Pasquale Cavaliere, Catalin Iulian Pruncu, Martin Balog, Moara Marques de Castro & Rajni Chahal. (2022) Architectural design of advanced aluminum matrix composites: a review of recent developments. Critical Reviews in Solid State and Materials Sciences 0:0, pages 1-71.
Read now
Yindong Shi, Wei Shang, Tingting Wang, Xiliang Zhang, Shunxing Liang, Zheng Lv, Lina Wang, Hongji Liu, Zhenguo Xing & Dong Xu. (2022) Enhancing mechanical properties of metallic materials by architecting gradient structures. Materials Science and Technology 38:4, pages 254-267.
Read now
Yuri Estrin, Yan Beygelzimer, Roman Kulagin, Peter Gumbsch, Peter Fratzl, Yuntian Zhu & Horst Hahn. (2021) Architecturing materials at mesoscale: some current trends. Materials Research Letters 9:10, pages 399-421.
Read now
Yuntian Zhu, Kei Ameyama, Peter M. Anderson, Irene J. Beyerlein, Huajian Gao, Hyoung Seop Kim, Enrique Lavernia, Suveen Mathaudhu, Hael Mughrabi, Robert O. Ritchie, Nobuhiro Tsuji, Xiangyi Zhang & Xiaolei Wu. (2021) Heterostructured materials: superior properties from hetero-zone interaction. Materials Research Letters 9:1, pages 1-31.
Read now
Xing Fang, Qiqi Xue, Kaiyuan Yu, Runguang Li, Daqiang Jiang, Lei Ge, Yang Ren, Changfeng Chen & Xiaolei Wu. (2020) Superior strength-ductility synergy by hetero-structuring high manganese steel. Materials Research Letters 8:11, pages 417-423.
Read now
Run Geng, Qinglong Zhao, Feng Qiu & Qichuan Jiang. (2020) Simultaneously increased strength and ductility via the hierarchically heterogeneous structure of Al-Mg-Si alloys/nanocomposite. Materials Research Letters 8:6, pages 225-231.
Read now
M. Pourbashiri, C. Poletti, M. Sedighi & C. Sommitsch. (2020) Strengthening mechanisms of Al wires processed by equal channel angular torsion drawing. Materials Science and Technology 36:1, pages 65-82.
Read now
Xiaohui Yan, Xiangchen Meng, Lan Luo, Yuhai Jing, Guangbin Yi, Jian Lu & Yong Liu. (2019) Mechanical behaviour of AZ31 magnesium alloy with the laminate and gradient structure. Philosophical Magazine 99:24, pages 3059-3077.
Read now
Sumin Shin, Chaoyi Zhu, Cheng Zhang & Kenneth S. Vecchio. (2019) Extraordinary strength-ductility synergy in a heterogeneous-structured β -Ti alloy through microstructural optimization. Materials Research Letters 7:11, pages 467-473.
Read now
Mu-Xin Yang, Run-Guang Li, Ping Jiang, Fu-Ping Yuan, Yan-Dong Wang, Yun-Tian Zhu & Xiao-Lei Wu. (2019) Residual stress provides significant strengthening and ductility in gradient structured materials. Materials Research Letters 7:11, pages 433-438.
Read now
Yuntian Zhu & Xiaolei Wu. (2019) Perspective on hetero-deformation induced (HDI) hardening and back stress. Materials Research Letters 7:10, pages 393-398.
Read now
Yinghui Wei, Huiqi Cui, Huan Wei, Baosheng Liu, Huayun Du & Lifeng Hou. (2019) Improving mechanical properties for pure irons by local surface mechanical attrition treatment. Materials Science and Technology 35:10, pages 1257-1264.
Read now
Ruixiao Zheng, Guodong Li, Zhe Zhang, Yitan Zhang, Shengyu Yue, Xu Chen, Kei Ameyama & Chaoli Ma. (2019) Manipulating the powder size to achieve enhanced strength and ductility in harmonic structured Al alloy. Materials Research Letters 7:6, pages 217-224.
Read now
C.W. Shao, P. Zhang, X.G. Wang, Q. Wang & Z.F. Zhang. (2019) High-cycle fatigue behavior of TWIP steel with graded grains: breaking the rule of mixture. Materials Research Letters 7:1, pages 26-32.
Read now
Fuping Yuan, Dingshun Yan, Jiangda Sun, Lingling Zhou, Yuntian Zhu & Xiaolei Wu. (2019) Ductility by shear band delocalization in the nano-layer of gradient structure. Materials Research Letters 7:1, pages 12-17.
Read now
Zhiqiang Fu, Benjamin E. MacDonald, Zhiming Li, Zhenfei Jiang, Weiping Chen, Yizhang Zhou & Enrique J. Lavernia. (2018) Engineering heterostructured grains to enhance strength in a single-phase high-entropy alloy with maintained ductility. Materials Research Letters 6:11, pages 634-640.
Read now
Song Lei, Yindong Shi, Lina Wang, Ming Li, Yulong Zhang & Yajun Zhao. (2018) Enhancing the mechanical properties of low-carbon steel by a graded dislocation microstructure. Materials Science and Technology 34:15, pages 1854-1860.
Read now
Xiaolei Wu & Yuntian Zhu. (2017) Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Materials Research Letters 5:8, pages 527-532.
Read now
Xiangde Bian, Fuping Yuan, Yuntian Zhu & Xiaolei Wu. (2017) Gradient structure produces superior dynamic shear properties. Materials Research Letters 5:7, pages 501-507.
Read now
Rui Yuan, Irene J. Beyerlein & Caizhi Zhou. (2017) Homogenization of plastic deformation in heterogeneous lamella structures. Materials Research Letters 5:4, pages 251-257.
Read now
Muxin Yang, Yue Pan, Fuping Yuan, Yuntian Zhu & Xiaolei Wu. (2016) Back stress strengthening and strain hardening in gradient structure. Materials Research Letters 4:3, pages 145-151.
Read now
R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer & Y.T. Zhu. (2016) Fundamentals of Superior Properties in Bulk NanoSPD Materials. Materials Research Letters 4:1, pages 1-21.
Read now
Xianghai An, Qingyun Lin, Shiding Wu & Zhefeng Zhang. (2015) Improved Fatigue Strengths of Nanocrystalline Cu and Cu–Al Alloys. Materials Research Letters 3:3, pages 135-141.
Read now
J.Y. Li, W. Li, M.J. Jin & X.J. Jin. (2015) Strain-Induced Reverse Phase Transformation in Nanocrystalline Co-Ni Alloys. Materials Research Letters 3:2, pages 107-113.
Read now

Articles from other publishers (387)

A.X. Li, X.S. Liu, R. Li, S.B. Yu, M.H. Jiang, J.S. Zhang, C.N. Che, D. Huang, P.F. Yu & G. Li. (2024) Double heterogeneous structures induced excellent strength–ductility synergy in Ni40Co30Cr20Al5Ti5 medium-entropy alloy. Journal of Materials Science & Technology 181, pages 176-188.
Crossref
Hao Ran, Peihao Ye, Fengjiao Guo, Mingsai Wang, Wuli Su, Xue Chen, Si Gao, Nobuhiro Tsuji, Yuntian Zhu, Xiaochong Lu & Chongxiang Huang. (2024) Superior strength-ductility combination resulted from hetero-zone boundary affected region in Cu-Fe layered material. Journal of Materials Science & Technology 181, pages 209-219.
Crossref
Zhongchen Zhou, Qingzhong Mao, Jiansheng Li, Yanfang Liu, Shuaizhuo Wang, Wei Jiang, Chongxiang Huang & Yusheng Li. (2024) Mechanical properties and fracture behavior in copper-brass heterostructured fibers. Materials Science and Engineering: A 890, pages 145922.
Crossref
Xingfu Li, Jinxu Zhang, Cong Li, Zhengrong Fu, Yulan Gong, Hongjiang Pan, Zhilong Tan, Yuntian Zhu & Xinkun Zhu. (2024) Elucidating the mechanical response and microstructure evolution of the constituent layers in gradient-structured Cu alloys. Journal of Materials Research and Technology 28, pages 316-326.
Crossref
Peng Jing, Yu Wang, Yuankai Zhou & Wenchao Shi. (2023) Modulating strengthening ability of layer-grained fcc metals with distinct stacking fault energy: Molecular dynamics simulation. Materials Today Nano 24, pages 100425.
Crossref
Mingyang Chen, Shengdan Liu, Kezhun He, Xu Zheng & Guilong Jia. (2023) The effect of precipitate-free zone on mechanical properties in Al-Zn-Mg-Cu aluminum alloy: Strain-induced back stress strengthening. Journal of Alloys and Compounds 969, pages 172426.
Crossref
Yuelun Leng, Tong Wu, Yong Hu, Kun Bo & Shijie Liu. (2023) Effects of TiB2 content and gradient structure on microstructural characterization and mechanical properties of TiB2/Al7050 composites. Ceramics International 49:23, pages 37638-37649.
Crossref
Dingge Fan, Cuiju Wang, Xuanchang Zhang, Kaibo Nie & Kunkun Deng. (2023) Hot Tensile Deformation Mechanism and Fracture Behavior of the ZW31/PMMC Laminate. Materials 16:23, pages 7446.
Crossref
Jiapeng Zheng, Gongbin Tang, Fenghua Su, Tao Li, Zhongwei Liang & Xiaochu Liu. (2023) Facile fabrication of aluminium alloys with gradient nanostructures incorporating α-Al2O3 particles for enhanced tribological properties. Tribology International 189, pages 108921.
Crossref
Ming Ji, Lujun Huang, Rui Zhang, Shuai Wang, Fengbo Sun, Fanchao Meng, Lin Geng, Guangquan Tang & Hongwei Zhang. (2023) Architecture design and significant toughness enhancement of Ti6Al4V based composites with gradient laminate distributed TiB. Materials Characterization 205, pages 113253.
Crossref
Zhongkai Li, Yujie Liu, Yanfei Wang, Jun Hu, Lei Xu, Jianjun Wang, Chunming Liu & Yuntian Zhu. (2023) Hierarchical strain band formation and mechanical behavior of a heterostructured dual-phase material. Journal of Materials Science & Technology 162, pages 25-37.
Crossref
Xiang Chen, Weizhang Wang, Min Wang, Guangsheng Huang, Junlei Zhang & Fusheng Pan. (2023) Optimizing the strength and ductility of pure aluminum laminate via tailoring coarse/ultrafine grain layer thickness ratio. Journal of Materials Research and Technology 27, pages 7394-7406.
Crossref
Shibiao Zhong, Jiqiang Chen, Shengci Li, Jieke Ren, Jiale Miao, Ting Xing, Jialin Guo & Olanrewaju A. Ojo. (2023) A scalable method for preparing Al–Mg–Si–Cu alloy profile with varies heterogeneous structures and their relationship with mechanical properties. Journal of Materials Research and Technology 27, pages 92-104.
Crossref
Y.Q. Zhang, M. Zhan, X.G. Fan & K. Yang. (2023) Forming of pure titanium tubes by combined spinning-ultrasonic surface rolling process: Microstructure and mechanical properties. Journal of Manufacturing Processes 105, pages 70-83.
Crossref
Zhengyang Luo, Jiahao Li, Tengfeng Feng, Kejie Lu & Xinkai Ma. (2023) Optimizing heterostructure parameters for enhanced mechanical performance of Al0.1CoCrFeNi high entropy alloy. Materials Science and Engineering: A 885, pages 145623.
Crossref
Longfei Zeng, Luming Zeng, Peng Xu, Weijiang Liu, Tongxiang Liang, Weirong Li & Xuehui Zhang. (2023) Enhanced strength-ductility synergy in high-entropy alloys via architecting three-level gradient hierarchical nanostructure. Materials Science and Engineering: A 885, pages 145597.
Crossref
J. Guo, O.V. Mishin, Q.S. Mei, X. Huang & G.L. Wu. (2023) Deformation-induced contaminants and thermal stability variations in copper processed by high pressure surface rolling. Materials Letters 349, pages 134840.
Crossref
Zongchi Wang, Shouwen Shi, Jingtai Yu, Bingbing Li, Yajing Li & Xu Chen. (2023) Combining multiscale structure and TRIP effect to enhance room temperature tensile properties of 304 stainless steel by cryogenic cyclic plastic strengthening. Scripta Materialia 234, pages 115581.
Crossref
Kuo Yang, Yihan Wang, Mingxing Guo, Hu Wang, Yongda Mo, Xueguang Dong & Huafen Lou. (2023) Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: A review. Progress in Materials Science 138, pages 101141.
Crossref
Yufei Chen, Tiwen Lu, Xiyu Chen, Binhan Sun, Ning Yao, Kaishang Li, Jihang Qiu, Xiaoqi Hu, Xian-Cheng Zhang & Shan-Tung Tu. (2023) Optimized bilateral ultrasonic surface rolling process assisting directed energy deposition of thin-walled medium-entropy alloy with high mechanical performance. Additive Manufacturing 78, pages 103887.
Crossref
Wanzhi Qiang, Qi Wu & Lianchun Long. (2023) Grain Distribution for Optimal Strength in Homogeneous and Gradient Nano‐Grained Coppers. Advanced Engineering Materials 25:17.
Crossref
Jiangli Ning, Bosong Gao, Jialiao Zhou, Liansheng Chen, Guangze Tang & Shubo Li. (2023) In-Situ Study on the Tensile Deformation and Fracture Mechanism of a Bimodal-Structured Mg-Gd-Y Alloy. Materials 16:17, pages 5978.
Crossref
Dhruv Bajaj, Aihan Feng, Shoujiang Qu, Zhuo Chen, Dongyang Li & Daolun L. Chen. (2023) Deformation Behavior of 3D‐Printed High‐Entropy Alloys: A Critical Review. Advanced Engineering Materials.
Crossref
Junye Li, Guanghui Wang, Maofei Zhang, Jiahao Li, Xiaotian Fang & Xinkai Ma. (2023) Strengthening mechanisms of a heterostructured pure aluminum with extraordinary mechanical properties. Materials Characterization 202, pages 113049.
Crossref
Shifeng Lin, Zhengwang Zhu, Zengqian Liu, Shaofan Ge, Dingming Liu, Hong Li, Zhengkun Li, Huameng Fu, Aimin Wang, Zhefeng Zhang, Haifeng Zhang & Robert O. Ritchie. (2023) A damage-tolerant Ti-rich multiphase metallic-glass composite with hierarchically heterogeneous architecture. Composites Part B: Engineering 263, pages 110818.
Crossref
Yaxin Zhang & Hao Lyu. (2023) The Effect of Rolling Texture on the Plastic Deformation of Nano-Gradient Aluminum. Nanomaterials 13:15, pages 2214.
Crossref
Pravin Kavle, Aiden M. Ross, Jacob A. Zorn, Piush Behera, Eric Parsonnet, Xiaoxi Huang, Ching‐Che Lin, Lucas Caretta, Long‐Qing Chen & Lane W. Martin. (2023) Exchange‐Interaction‐Like Behavior in Ferroelectric Bilayers. Advanced Materials.
Crossref
Cong Li, Xingfu Li, Zhengrong Fu, Hongjiang Pan, Yulan Gong & Xinkun Zhu. (2023) An Overview on Recent Works of Heterostructured Materials Fabricated by Surface Mechanical Attrition Treatment. MATERIALS TRANSACTIONS 64:7, pages 1429-1440.
Crossref
Liwei Lan, Hongwei Zhang, Zheyu Yang, Changchun Li, Xiaohu Hao, Wenxian Wang & Zeqin Cui. (2023) Significant transitions of microstructure and mechanical properties in laser additive manufacturing AlCoCrFeNi2.1 eutectic high-entropy alloy under heat treatment. Journal of Materials Research and Technology 25, pages 6250-6262.
Crossref
Yanke Liu, Guohao Qin, Wei Wang, Yan Ma, Muxin Yang, Sihai Jiao, Xiaolei Wu & Fuping Yuan. (2023) Effects of layer thickness on deformation-induced martensite transformation and tensile behaviors in a multilayer laminate. Journal of Materials Research and Technology.
Crossref
Yifei Zhou, Liang Liu, Rui Bao, Jianhong Yi, Jingmei Tao & Caiju Li. (2023) Achieving Good Strength–Plasticity Compatibility in Cu Composites via Carbon Nanotube‐Induced Heterogeneous Bimodal Structure. Advanced Engineering Materials 25:13.
Crossref
Zhongxia Shang, Tianyi Sun, Jie DingNicholas A. RichterNathan M. HeckmanBenjamin C. WhiteBrad L. Boyce, Khalid Hattar, Haiyan Wang & Xinghang Zhang. (2023) Gradient nanostructured steel with superior tensile plasticity. Science Advances 9:22.
Crossref
Rae Eon Kim, Gangaraju Manogna Karthik, Auezhan Amanov, Yoon-Uk Heo, Sang Guk Jeong, Gang Hee Gu, Hyojin Park, Eun Seong Kim, Do Won Lee & Hyoung Seop Kim. (2023) Superior gradient heterostructured alloys fabricated by laser powder bed fusion via annealing and ultrasonic nanocrystal surface modification. Scripta Materialia 230, pages 115422.
Crossref
Yunhao Fan, Gaoming Zhu, Jun-Sang Park, Xuan Zhang, Zhe Song, Huamiao Wang, Xiaoqin Zeng & Leyun Wang. (2023) The role of Ca on the microstructure and tensile properties of Mg-Al-Zn-Ca alloys. Materialia 29, pages 101787.
Crossref
Tianle Li, Fujian Zhou, Lianzhu Long, Bin Wang, Zejun Tang & Xifeng Li. (2023) Fatigue crack growth and mechanical properties of laminated TC4/TB8 titanium alloys fabricated by diffusion bonding. Materials Characterization 200, pages 112825.
Crossref
Xiangcheng Cui, Weihua Hu, Xing Lu & Yunzhuo Lu. (2023) Laser additive manufacturing of laminated bulk metallic glass composite with desired strength-ductility combination. Journal of Materials Science & Technology 147, pages 68-76.
Crossref
Xiaoxiao Geng, Junheng Gao, Yuhe Huang, Shuize Wang, Yu Zhang, Guilin Wu, Haitao Zhao, Honghui Wu & Xinping Mao. (2023) A novel dual-heterogeneous-structure ultralight steel with high strength and large ductility. Acta Materialia 252, pages 118925.
Crossref
Yuandong Liu, Wei Li, Yidan Sun, Linbo Chen, Guoqi Chang & Guisheng Deng. (2023) Effect of ultrasonic surface rolling process on microstructure and properties of rolled Mg-Y-Nd-Zr alloy. Journal of Materials Science 58:22, pages 9362-9381.
Crossref
Yang Guo, Pingwei Xu & Yu Liang. (2023) A longitudinal gradient architecture achieves better tensile properties in Ti6242 alloy. Journal of Materials Research and Technology 24, pages 8002-8013.
Crossref
Wenhuan Chen, Guojia Liu, Yuyang Gao, Weijun He, Zejun Chen & Bin Jiang. (2023) Fabrication of dual-gradient microstructure and their effects on the mechanical properties of commercial pure Ti. Journal of Materials Research and Technology 24, pages 3309-3322.
Crossref
Qiong He, Mingsai Wang, Bo Yang, Fengjiao Guo, Hao Ran, Wei Wei, Chao Zhang, Yu Zhai, Qingyuan Wang, Wenquan Cao & Chongxiang Huang. (2023) Microstructure Heterogeneity and Mechanical Properties of a High-Strength Ductile Laminated Steel by Electron Beam Welding. Materials 16:8, pages 3211.
Crossref
Sai Zhou, Zhaoyang Hou, Nana Liu, Yuan Niu, Chang Li, Zhen Wang, Jinguo Wang, Lei Gao & Kejun Dong. (2023) Optimal grain size distribution in gradient nano-grained nickel. Vacuum 210, pages 111854.
Crossref
Jianfeng Zhao, Baoxi Liu, Yanfei Wang, Yanxiang Liang, Jicheng Li & Xu Zhang. (2023) Dispersed strain bands promote the ductility of gradient nano-grained material: A strain gradient constitutive modeling considering damage effect. Mechanics of Materials 179, pages 104599.
Crossref
M.Y. He, Y.F. Shen, N. Jia, Peter K. Liaw & L. Zuo. (2023) Achieving sustainable strain hardening in a carbon-doped CuFeMnNi high-entropy alloy via dual-level heterogeneous microstructures. Journal of Alloys and Compounds 939, pages 168831.
Crossref
Xu Zhang, Jianfeng Zhao, Guozheng Kang & Michael Zaiser. (2023) Geometrically necessary dislocations and related kinematic hardening in gradient grained materials: A nonlocal crystal plasticity study. International Journal of Plasticity 163, pages 103553.
Crossref
Guolong Liu, Shuai Liu, Dongmei Zhang, Yunli Feng & Fucheng Zhang. (2023) Regulation on Annealing Multiscale Laminar Structure and Mechanical Characteristics of Plain Medium Carbon Steel by Warm Pre-deformation Extent. Metallurgical and Materials Transactions A 54:4, pages 1364-1378.
Crossref
Hao Lyu, Yaxin Zhang, Yuan Bao & Jiahui Zhang. (2023) The Effect of Initial Texture on the Plastic Deformation of Gradient Aluminum. Materials 16:7, pages 2603.
Crossref
Yu Zhou, Ke Wang, Xin Wen, Renlong Xin, Jingfeng Wang & Qing Liu. (2023) Achieving synergy enhancement of strength and ductility in Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy by fabricating a new multiscale microstructure. Scripta Materialia 226, pages 115233.
Crossref
Tianle Li, Qianwen Zhang, Yanbin Han, Lina Zhao, Dayong An, Huiping Wu, Xifeng Li & Jun Chen. (2023) Two kinds of α/β phase transformations and enhanced strengths of the bonded interface in laminated Ti alloys. Materials Science and Engineering: A 869, pages 144811.
Crossref
Xiliang Zhang, Shengjia Gai, Tao Liu, Yindong Shi, Yanhui Wang, Qian Zhou, Zhenguo Xing, Hongji Liu & Zhibo Zhai. (2023) Simultaneous improvement of yield strength and ductility in medium Mn steel by combining gradient structure and TRIP effect. Materials Characterization 197, pages 112650.
Crossref
Ruoxu Liu, Desong Chen, Meigui Ou & Yu Liang. (2023) The effect of initial grain size on the strength property of copper with gradient microstructure. Journal of Materials Research and Technology.
Crossref
Zhongchen Zhou, Jiansheng Li, Qingzhong Mao, Yu Yue, Shuaizhuo Wang & Yusheng Li. (2023) Heterostructured copper-brass laminates with gradient transition layer. Journal of Materials Research and Technology 23, pages 5534-5546.
Crossref
Xueqin Pang, Yuning Zeng, Songqing Li, Zizhao Li, Pengyu Shen, Baoyu Zhang & Wenjun Deng. (2023) Controllable gradient and concurrent improvements of strength-ductility in gradient-structured sheet fabricated by plastic flow machining. Journal of Materials Research and Technology 23, pages 4479-4498.
Crossref
Hamed Shahmir, Mohammad Sajad Mehranpour, Seyed Amir Arsalan Shams & Terence G. Langdon. (2023) Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering. Journal of Materials Research and Technology 23, pages 3362-3423.
Crossref
Wanzhi Qiang, Qi Wu & Lianchun Long. (2023) Synergistic Strengthening of Dislocation and Heterodeformation Induced in Gradient Nanograined Copper Film: A Molecular Dynamics Study. physica status solidi (a) 220:6.
Crossref
Yuanjun Ma, Yutian Ding, Yubi Gao, Jianjun Chen & Xingmao Wang. (2023) Strengthening the Mechanical Properties of Inconel 625 Superalloy with Gradient Nanotwinned Structure. Journal of Materials Engineering and Performance.
Crossref
Guolong Liu, Kun Liu, Minghe Zhang, Jiangli Ning & Yunli Feng. (2023) Effect of cold rolling reduction ratio on microstructure and mechanical properties of Fe–10Mn–4Al-0.4C steel containing δ ferrite. Materials Science and Engineering: A, pages 144715.
Crossref
Jianying Wang, Jianpeng Zou, Hailin Yang, Xixi Dong, Peng Cao, Xiaozhou Liao, Zhilin Liu & Shouxun Ji. (2023) Ultrastrong and ductile (CoCrNi)94Ti3Al3 medium-entropy alloys via introducing multi-scale heterogeneous structures. Journal of Materials Science & Technology 135, pages 241-249.
Crossref
Yanfei Yin, Wenjuan Kou, Yongqing Zhao, Xiang Li, Binjie Zhang, Jianwei Xu & Weidong Zeng. (2023) Deformation behavior and fracture mechanism of laminated Ti/Ti-50 Nb alloy with diffusion layer. Journal of Alloys and Compounds 933, pages 167754.
Crossref
Jianqiang Zhou, Xiangdu Xu, Zhidan Sun, Delphine Retraint, Xianjie Zhang & Hongqian Xue. (2023) Predicting gradient mechanical behaviour of a shot-peened structure. International Journal of Solids and Structures 262-263, pages 112063.
Crossref
Yuchen Peng, Zonghua Xie, Changchao Su, Yuefang Zhong, Zushan Tao, Dongyang Zhuang, Jiahui Zeng, Hongqun Tang & Zhengbing Xu. (2023) Inhomogeneous Microstructure Evolution of 6061 Aluminum Alloyat High Rotating Speed Submerged Friction Stir Processing. Materials 16:2, pages 579.
Crossref
Yuhao Tao, Wenqiang Cheng & Wei Wang. (2023) Atomistic tensile deformation mechanisms in a CrCoNi medium-entropy alloy with gradient nano-grained structure at cryogenic temperature. Frontiers in Materials 9.
Crossref
Liliana Romero-Resendiz, Muhammad Naeem & Yuntian Theodore Zhu. (2023) Heterostructured Materials by Severe Plastic Deformation: Overview and Perspectives. MATERIALS TRANSACTIONS.
Crossref
Yuntian Zhu & Xiaolei Wu. (2023) Heterostructured materials. Progress in Materials Science 131, pages 101019.
Crossref
Donghwa Bae, Sangeun Park, Jae Bok Seol, Dong Jun Lee, Auezhan Amanov, Hyokyung Sung & Jung Gi Kim. (2023) Microstructural evolution and mechanical properties of laser-powder bed fusion processed 316L stainless steel with an ultrasonic-nanocrystalline surface modification. Materials Science and Engineering: A 862, pages 144436.
Crossref
Yanfei Wang, Xiaolong Ma, Fengjiao Guo, Zhifu Zhao, Chongxiang Huang, Yuntian Zhu & Yueguang Wei. (2023) Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure. Materials & Design 225, pages 111593.
Crossref
Wanting Sun, Jiasi Luo, Yim Ying Chan, J.H. Luan & Xu-Sheng Yang. (2023) An extraordinary-performance gradient nanostructured Hadfield manganese steel containing multi-phase nanocrystalline-amorphous core-shell surface layer by laser surface processing. Journal of Materials Science & Technology 134, pages 209-222.
Crossref
Hao Wu, Meng Huang, Yiping Xia, Xuewen Li, Rengeng Li, Chenglu Liu, Weimin Gan, Tiqiao Xiao, Lin Geng, Qing Liu & Guohua Fan. (2023) The importance of interfacial stress-affected zone in evading the strength-ductility trade-off of heterogeneous multi-layered composites. International Journal of Plasticity 160, pages 103485.
Crossref
Zhaopeng Tong, Wenbin Wan, Huaile Liu, Wangfan Zhou, YunXia Ye & Xudong Ren. (2023) Combination of annealing and laser shock peening for tailoring microstructure and mechanical properties of laser directed energy deposited CrMnFeCoNi high-entropy alloy. Additive Manufacturing 61, pages 103345.
Crossref
Yuntian Zhu & Xiaolei Wu. 2023. Introduction to Heterostructured Materials. Introduction to Heterostructured Materials 1 14 .
Yuntian Zhu & Xiaolei Wu. 2023. Introduction to Heterostructured Materials. Introduction to Heterostructured Materials 51 106 .
Yongju Kim, Jaimyun Jung, Hyung Keun Park & Hyoung Seop Kim. (2022) Importance of Microstructural Features in Bimodal Structure–Property Linkage. Metals and Materials International 29:1, pages 53-58.
Crossref
Zhuangzhuang Liu, Xinbo Ni, Wei Sun, Kesong Miao, Yiping Xia, Hao Wu, Zhi Wang & Guohua Fan. (2022) Interfacial-constraint-mediated pyramidal slip of hexagonal titanium at room temperature. Scripta Materialia 221, pages 114974.
Crossref
Yuzhong Miao, Meini Yuan, Zhiqiang Fan, Xidong Wang, Zhaocan Li, Xiaosheng Zhou & Honglin Wang. (2022) Effect of hot-pressing temperature on microstructure and the improvement of residual Al on tensile ductility of Ti/Al3Ti heterogeneous structure. Materials Science and Engineering: A 860, pages 144291.
Crossref
S.L. Cai, D.Q. Li, S.C. Liu, J.J. Si, J. Gu, L.X. Zhou, Y.F. Cheng & C.C. Koch. (2022) Cryogenic reciprocating torsion induced nanoscale precipitation in aluminum wire with exceptional strength and electrical conductivity. Materials Science and Engineering: A 860, pages 144276.
Crossref
Xiliang Zhang, Zerun Jia, Tao Liu, Yindong Shi, Hongji Liu, Xinyue Wang, Yanhui Wang, Xiaoyan Liu & Qian Zhou. (2022) Enhancing the strength–ductility synergy of medium-Mn steel by introducing multiple gradient structures. Materials Science and Engineering: A 860, pages 144268.
Crossref
T.H. Chou, W.P. Li, H.W. Chang, X.H. Du, W.S. Chuang, T. Yang, Y.T. Zhu & J.C. Huang. (2022) Quantitative analysis of hetero-deformation induced strengthening in heterogeneous grain structure. International Journal of Plasticity 159, pages 103482.
Crossref
Yinuo Guo, Haijun Su, Peixin Yang, Zhonglin Shen, Di Zhao, Yong Zhao, Yuan Liu & Haotian Zhou. (2022) New insight into tailorable eutectic high entropy alloys with remarkable strength–ductility synergy and ample shaping freedom fabricated using laser powder bed fusion. Additive Manufacturing 60, pages 103257.
Crossref
Lin XU, Jia-hao WANG, Rui-zhi WU, Chun-bo ZHANG, Hua-jie WU, Le-gan HOU & Jing-huai ZHANG. (2022) High specific strength MWCNTs/Mg-14Li-1Al composite prepared by electrophoretic deposition, friction stir processing and cold rolling. Transactions of Nonferrous Metals Society of China 32:12, pages 3914-3925.
Crossref
Bo Li, Chun-Ming Niu, Tian-Long Zhang, Gong-Yu Chen, Gang Zhang, Dong Wang, Xiao-Ye Zhou & Jia-Ming Zhu. (2022) Advances of machining techniques for gradient structures in multi-principal-element alloys. Rare Metals 41:12, pages 4015-4026.
Crossref
Wenqiang Cheng, Guohao Qin, Muxin Yang, Wei Wang & Fuping Yuan. (2022) Excellent tensile properties and deformation mechanisms in a FeCoNi-based medium entropy alloy with dual-heterogeneous structures. Journal of Applied Physics 132:17.
Crossref
Wenhuan Chen, Weijun He, Nianchun Luo, Yizhi Tang, Zejun Chen & Bin Jiang. (2022) Effect of layer thickness on the enhanced strength and ductility of laminated Ti/Al composite. Materials Science and Engineering: A 859, pages 144230.
Crossref
Chunquan Liu, Xianhua Chen, Yaobo Hu, Wei Zhang, Yusheng Zhang, Jianbo Li & Fusheng Pan. (2022) Microstructure and mechanical properties of gradient ultrafine-grained Mg-Gd-Zr alloy. Journal of Materials Research and Technology 21, pages 3896-3908.
Crossref
Gang Hee Gu, Rae Eon Kim, Eun Seong Kim, Jungwan Lee, Auezhan Amanov & Hyoung Seop Kim. (2022) Multi-layered heterostructured CoCrFeMnNi high-entropy alloy processed using direct energy deposition and ultrasonic nanocrystalline surface modification. Journal of Materials Research and Technology 21, pages 2880-2890.
Crossref
Linbo Chen, Wei Li, Yidan Sun & Mei Luo. (2022) Effect of microstructure evolution on the mechanical properties of a Mg–Y–Nd–Zr alloy with a gradient nanostructure produced via ultrasonic surface rolling processing. Journal of Alloys and Compounds 923, pages 166495.
Crossref
G.M. Karthik, Yongju Kim, Eun Seong Kim, Alireza Zargaran, Praveen Sathiyamoorthi, Jeong Min Park, Sang Guk Jeong, Gang Hee Gu, Auezhan Amanov, Tamas Ungar & Hyoung Seop Kim. (2022) Gradient heterostructured laser-powder bed fusion processed CoCrFeMnNi high entropy alloy. Additive Manufacturing 59, pages 103131.
Crossref
Shuaishuai Liu, Dabiao Xia, Hong Yang, Guangsheng Huang, Feixiang Yang, Xianhua Chen, Aitao Tang, Bin Jiang & Fusheng Pan. (2022) Mechanical properties and deformation mechanism in Mg-Gd alloy laminate with dual-heterostructure grain size and texture. International Journal of Plasticity 157, pages 103371.
Crossref
Yanyun Zhao, Mengtian Liang, Shaojun Liu & Weihua Zhang. (2022) High-temperature fatigue behavior and cyclic deformation of a gradient nanostructured RAFM steel. International Journal of Fatigue 163, pages 107013.
Crossref
Songjiang Lu, Qianhua Kan, Bo Zhang, Chao Yu & Xu Zhang. (2022) Synergetic-Deformation-Induced Strengthening in Gradient Nano-Grained Metals: A 3D Discrete Dislocation Dynamics Study. Metals 12:9, pages 1478.
Crossref
Xingfu Li, Zhenghong Zhang, Yunhua Bai, Yifeng Liu, Yang Liu, Cong Li, Zhengrong Fu, Hongjiang Pan, Jingran Yang & Xinkun Zhu. (2022) The effect of mechanical incompatibility and strain delocalization on the mechanical properties of gradient structure Cu-4.5Al alloy. Materials Science and Engineering: A 853, pages 143693.
Crossref
Like Xu, Zhifeng Huang, Qiang Shen & Fei Chen. (2022) Atomistic simulations of plasticity heterogeneity in gradient nano-grained FCC metals. Materials & Design 221, pages 110929.
Crossref
Qinghang Wang, Haowei Zhai, Lintao Liu, Hongbo Xia, Bin Jiang, Jun Zhao, Daolun Chen & Fusheng Pan. (2022) Novel Mg-Bi-Mn wrought alloys: The effects of extrusion temperature and Mn addition on their microstructures and mechanical properties. Journal of Magnesium and Alloys 10:9, pages 2588-2606.
Crossref
Songjiang Lu, Jianfeng Zhao, Minsheng Huang, Zhenhuan Li, Guozheng Kang & Xu Zhang. (2022) Multiscale discrete dislocation dynamics study of gradient nano-grained materials. International Journal of Plasticity 156, pages 103356.
Crossref
Yanfei Wang, Yuntian Zhu, Zhijie Yu, Jianfeng Zhao & Yueguang Wei. (2022) Hetero-zone boundary affected region: A primary microstructural factor controlling extra work hardening in heterostructure. Acta Materialia, pages 118395.
Crossref
Hao Lyu, Yaxin Zhang & Haoshuai Li. (2022) The Effect of Grain Size Gradient on Plastic Deformation of Gradient Aluminum. Metallurgical and Materials Transactions A 53:9, pages 3428-3440.
Crossref
Rui Yuan. (2022) Revealing the effects of concomitant grain coarsening and refinement on the internal variable evolution and mechanical properties of gradient nanostructured nickel. Materials Today Communications 32, pages 104080.
Crossref
L. Romero-Resendiz, M. El-Tahawy, T. Zhang, M.C. Rossi, D.M. Marulanda-Cardona, T. Yang, V. Amigó-Borrás, Y. Huang, H. Mirzadeh, I.J. Beyerlein, J.C. Huang, T.G. Langdon & Y.T. Zhu. (2022) Heterostructured stainless steel: Properties, current trends, and future perspectives. Materials Science and Engineering: R: Reports 150, pages 100691.
Crossref
Yuxi Mu, Pingwei Xu, Yu Liang, Song Xiang & Cunhong Yin. (2022) Improving the tensile ductility in the fully pearlitic steel using sequential refinement of colony and laminated structure. Materials Science and Engineering: A 851, pages 143642.
Crossref
Bo Peng, Jinchuan Jie, Jia Liu, Jianping Qu, Mingfei Wang, Jia Sun, Xiaohu Chen, Zheng Ren & Tingju Li. (2022) Synergetic strengthening of heterogeneous interface far beyond rule of mixture in Cu/1010 steel bimetal laminar composite. Materials Science and Engineering: A 851, pages 143609.
Crossref
Wuqiang Ai, Yaojun Lin & Fei Chen. (2022) Microstructure and mechanical properties of Ti–Mg lightweight heterostructured materials. Materials Science and Engineering: A 850, pages 143560.
Crossref
Yonggang Wang, Zhenyu Ding, Zengliang Gao & Xiaogui Wang. (2022) Fabrication and mechanical properties of fully austenitic gradient nanostructured 310S stainless steel. Journal of Materials Science 57:32, pages 15530-15548.
Crossref
Gennaro Salvatore Ponticelli, Luca Di Salvo, Michele Giuliani, Riccardo Panciroli & Stefano Guarino. (2022) Induced back stress hardening and strengthening effect by repetitive progressive tensile loading of laser-powder bed fused 316L stainless steel. The International Journal of Advanced Manufacturing Technology 121:7-8, pages 5125-5138.
Crossref
V. K. Beura, Y. Karanth, K. Darling & K. Solanki. (2022) Role of gradient nanograined surface layer on corrosion behavior of aluminum 7075 alloy. npj Materials Degradation 6:1.
Crossref
Xingyu Li, Ning Xiong, Lin Zhang & Xuanhui Qu. (2022) A novel through-length gradient structure assisted strength-ductility synergy in hot-rolled tungsten. Materials & Design 219, pages 110775.
Crossref
Xihang Zhao, Zhenming Yue, Ge Wang, Zan Li & Celal Soyarslan. (2022) Role of GNDs in bending strength gain of multilayer deposition generated heterostructured bulk aluminum. Materials & Design 219, pages 110769.
Crossref
Huan Liu, Bo Gao, Yi Yang, Mengning Xu, Xingfu Li, Cong Li, Hongjiang Pan, Jingran Yang, Hao Zhou, Xinkun Zhu & Yuntian Zhu. (2022) Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy. Journal of Materials Research and Technology 19, pages 220-229.
Crossref
Christoph Stangl, Eva Kollmannsberger, Tatiana A. Zimogliadova, Manja Krüger & Holger Saage. (2022) Influence of a fine-grained surface structure on the tensile behaviour of a beta stabilised intermetallic γ-TiAl-based alloy. Intermetallics 146, pages 107566.
Crossref
Wuqiang Ai, Zewen Yu & Yaojun Lin. (2022) Synthesis of Ni-Cu Heterostructures with SPS to Achieve a Balance of Strength and Plasticity. Metals 12:7, pages 1093.
Crossref
Yanyun Zhao, Mengtian Liang, Shaojun Liu & Weihua Zhang. (2022) Enhanced fatigue property by fabricating a gradient nanostructured surface layer in a reduced-activation steel. Progress in Natural Science: Materials International 32:3, pages 385-391.
Crossref
Chen-Yun He, Xiao-Feng Yang, Hao Chen, Yong Zhang, Guang-Jian Yuan, Yun-Fei Jia & Xian-Cheng Zhang. (2022) Size-dependent deformation mechanisms in copper gradient nano-grained structure: A molecular dynamics simulation. Materials Today Communications 31, pages 103198.
Crossref
Feng Qin, Wenjun Lu & Jianjun Li. (2022) Enhanced resistance to shear instability by gradient nanolayered structures in sputtered Cu/Zr composites. Materials Science and Engineering: A 846, pages 143253.
Crossref
B. Sadeghi, P. Cavaliere & Catalin Iulian Pruncu. (2022) Architecture dependent strengthening mechanisms in graphene/Al heterogeneous lamellar composites. Materials Characterization 188, pages 111913.
Crossref
Jianqiang Zhou & Zhidan Sun. (2022) Numerical characterization of shot peening induced work hardening gradient and verification based on FEM analysis. International Journal of Solids and Structures 244-245, pages 111586.
Crossref
Zhenmin Lai, Yongjin Mai, Hongyi Song, Junjie Mai & Xiaohua Jie. (2022) Heterogeneous microstructure enables a synergy of strength, ductility and electrical conductivity in copper alloys. Journal of Alloys and Compounds 902, pages 163646.
Crossref
Yiping Xia, Kesong Miao, Hao Wu, Lin Geng, Chao Xu, Ching-Shun Ku & Guohua Fan. (2022) Superior strength-ductility synergy of layered aluminum under uniaxial tensile loading: The roles of local stress state and local strain state. International Journal of Plasticity 152, pages 103240.
Crossref
Yaofei Sun, Zhibao Hou, Zhenqiang Yao & Yongxiang Hu. (2022) Gradient structure and mechanical behavior induced by multiple laser peening in 304 austenitic stainless steel. The International Journal of Advanced Manufacturing Technology 120:5-6, pages 3383-3392.
Crossref
Jingyu Li, Feng Jiang, Yanguo Li, Ming Zhang, Chen Chen, Zhinan Yang & Fucheng Zhang. (2022) Effect of warm-rolling on the strength and ductility of multilayered composite steel. Materials Science and Engineering: A 841, pages 143043.
Crossref
Feng Jiang, Yaomin Wang, Zhinan Yang, Chen Chen & Fucheng Zhang. (2022) Mechanism of increased strength and ductility of martensite-austenite composite steel with different thickness ratios. Materials Science and Engineering: A 841, pages 143035.
Crossref
Tianyi Han, Yong Liu, Danni Yang, Nan Qu, Mingqing Liao, Zhonghong Lai, Meng Jiang & Jingchuan Zhu. (2022) Effect of annealing on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion additive manufacturing. Materials Science and Engineering: A 839, pages 142868.
Crossref
Hao Ding, Xiping Cui, Zhiqi Wang, Tao Zhao, Yuchen Wang, Yuanyuan Zhang, Hongtao Chen, Lujun Huang, Lin Geng & Junfeng Chen. (2022) A new strategy for fabrication of unique heterostructured titanium laminates and visually tracking their synchronous evolution of strain partitions versus microstructure. Journal of Materials Science & Technology 107, pages 70-81.
Crossref
Yi Yang, Yulan Gong, Xingfu Li, Huan Liu, Cong Li, Jingran Yang, Hongjiang Pan, Baipo Shu, Chao Deng, Junqi Fang & Xinkun Zhu. (2022) Effect of bimodal grain size and gradient structure on heterogeneous deformation induced (HDI) stress and mechanical properties of Cu. Materials Research Express 9:3, pages 035004.
Crossref
Nan Wang, Yongnan Chen, Gang Wu, Qinyang Zhao, Zhen Zhang, Lixia Zhu & Jinheng Luo. (2022) Non-equivalence contribution of geometrically necessary dislocation and statistically stored dislocation in work-hardened metals. Materials Science and Engineering: A 836, pages 142728.
Crossref
Gang Hee Gu, Eun Seong Kim, Hyeonseok Kwon, Sujung Son, Rae Eon Kim, Taek Gwon Oh & Hyoung Seop Kim. (2022) Fabrication of multi-gradient heterostructured CoCrFeMnNi high-entropy alloy using laser metal deposition. Materials Science and Engineering: A 836, pages 142718.
Crossref
Saeed Taali, Mohammad Reza Toroghinejad, Moritz Kuglstatter & Heinz Werner Höppel. (2022) Grain boundary engineering in roll-bonded copper to overcome the strength-ductility dilemma. Journal of Materials Research and Technology 17, pages 3198-3204.
Crossref
Jie Sheng, Jiafu Wei, Zhengning Li, Kun Man, Weiqian Chen, Guocai Ma, Yuehong Zheng, Faqi Zhan, Peiqing La, Yanchun Zhao & Abdelrahim Husain. (2022) Micro/nano-structure leads to super strength and excellent plasticity in nanostructured 304 stainless steel. Journal of Materials Research and Technology 17, pages 404-411.
Crossref
Junyu Chen, Binqi Liu, Leilei Xing, Wei Liu, Liping Lei & Gang Fang. (2022) Toward tunable mechanical behavior and enhanced elastocaloric effect in NiTi alloy by gradient structure. Acta Materialia 226, pages 117609.
Crossref
Rui Yuan. (2022) Establishing a quantitative relationship between strain gradient and hetero-deformation-induced stress in gradient-structured metals. Acta Mechanica 233:3, pages 961-989.
Crossref
Jiateng Ma, Yang Zhou, Weijun He, Bin Jiang & Qing Liu. (2021) Study on Microstructures and Mechanical Properties of Layered and Layered‐Gradient Zr/Ti Materials. Advanced Engineering Materials 24:3.
Crossref
Desong Chen, Xiqin Mao, Meigui Ou & Yu Liang. (2022) Mechanical properties of gradient structured copper obtained by ultrasonic surface rolling. Surface and Coatings Technology 431, pages 128031.
Crossref
Bhupendra Sharma, Koki Yagi, Sanjay K. Vajpai, Hiroshi Fujiwara & Kei Ameyama. (2022) A novel Bimodal Milling (BiM) approach to achieve harmonic structured SUS316L with controlled microstructure and outstanding mechanical performance. Powder Technology 399, pages 117188.
Crossref
Yu Zhang, Hua Ding, Haokun Zhu, Xuedong Zhou, Yutong Zhang & Nan Jia. (2022) Superior strength-ductility combination achieved via double heterogeneities of microstructure and composition: An example of medium manganese steel. Materials Science and Engineering: A 834, pages 142443.
Crossref
Xiang Chen, Baoxuan Zhang, Qin Zou, Guangsheng Huang, Shuaishuai Liu, Junlei Zhang, Aitao Tang, Bin Jiang & Fusheng Pan. (2022) Design of pure aluminum laminates with heterostructures for extraordinary strength-ductility synergy. Journal of Materials Science & Technology 100, pages 193-205.
Crossref
Yanfei Wang, Yueguang Wei, Zhifu Zhao, Hao Long, Zhongya Lin, Fengjiao Guo, Qiong He, Chongxiang Huang & Yuntian Zhu. (2022) Activating dispersed strain bands in tensioned nanostructure layer for high ductility: The effects of microstructure inhomogeneity. International Journal of Plasticity 149, pages 103159.
Crossref
Wei Jiang, Yuntian Zhu & Yonghao Zhao. (2022) Mechanical Properties and Deformation Mechanisms of Heterostructured High-Entropy and Medium-Entropy Alloys: A Review. Frontiers in Materials 8.
Crossref
Praveen Sathiyamoorthi & Hyoung Seop Kim. (2022) High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties. Progress in Materials Science 123, pages 100709.
Crossref
Hamid Azizi, Javad Samei, Hatem S. Zurob, David S. Wilkinson & David Embury. (2022) A novel approach to producing architectured ultra-high strength dual phase steels. Materials Science and Engineering: A 833, pages 142582.
Crossref
Piotr Bazarnik, Aleksandra Bartkowska, Yi Huang, Karol Szlązak, Bogusława Adamczyk-Cieślak, Jordi Sort, Malgorzata Lewandowska & Terence G. Langdon. (2022) Fabrication of hybrid nanocrystalline Al–Ti alloys by mechanical bonding through high-pressure torsion. Materials Science and Engineering: A 833, pages 142549.
Crossref
Xuefei Tao & Yukui Gao. (2022) Effects of wet shot peening on microstructures and mechanical properties of a 2060-T8 aluminum-lithium alloy. Materials Science and Engineering: A 832, pages 142436.
Crossref
Shengguo Ma, Yanjie Li, Shuo Li, Bin Xu, Tuanwei Zhang, Zhiming Jiao, Dan Zhao & Zhihua Wang. (2022) Synergetic strengthening and deformation mechanisms in gradient Al0.1CoCrFeNi high-entropy alloy. Materials Science and Engineering: A 829, pages 142165.
Crossref
Kinnera Rambabu, P. Gandhi, Modem Susmitha & K Sravanthi. (2022) A review on different techniques to produce gradient structured material. Materials Today: Proceedings 60, pages 2262-2265.
Crossref
Xingfu Li, Masashi Nakatani, Jingran Yang, Jinxu Zhang, Bhupendra Sharma, Hongjiang Pan, Kei Ameyama, Junqi Fang & Xinkun Zhu. (2022) Investigation of mechanical properties and microstructural evolution in Cu─Al alloys with gradient structure. Journal of Alloys and Compounds 890, pages 161835.
Crossref
Ji Hoon Kim, Guiyoung Gu, Min-Hyeok Kwon, Minseo Koo, Eun-Young Kim, Jin-Kyung Kim, Jae Sang Lee & Dong-Woo Suh. (2022) Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite. Acta Materialia 223, pages 117506.
Crossref
Yuntian T. Zhu & Ruslan Z. Valiev. 2022. Comprehensive Structural Integrity. Comprehensive Structural Integrity 162 195 .
Wei Zhang, Yan Du, Wei-Zhong Han, Wang-Tu Huo & Jiang-Jiang Hu. (2021) Gradient Microstructure Induced Synergetic Strengthening in Strain-Softening Zn Alloy. Metallurgical and Materials Transactions A 53:1, pages 12-17.
Crossref
Cheng Zhang, Cheng Peng, Jin Huang, Yanchun Zhao, Tingzhuang Han, Guangang Wang, Liang Wu & Guangsheng Huang. (2021) Improving Mechanical Properties of Mg–Sc Alloy by Surface AZ31 Layer. Metals 11:12, pages 2021.
Crossref
C.L. Zhang, X.Y. Bao, D.D. Zhang, W. Chen, J.Y. Zhang, J. Kuang, G. Liu & J. Sun. (2021) Achieving superior strength-ductility balance in a novel heterostructured strong metastable β-Ti alloy. International Journal of Plasticity 147, pages 103126.
Crossref
Yanfei Wang, Yuntian Zhu, Xiaolei Wu, Yueguang Wei & Chongxiang Huang. (2021) Inter-zone constraint modifies the stress-strain response of the constituent layer in gradient structure异构域交互约束重塑梯度结构成分层的应力-应变响应. Science China Materials 64:12, pages 3114-3123.
Crossref
Przemysław Snopiński, Anna Woźniak & Mariusz Król. (2021) Mechanical and Tibological Properties of SLM AlSi10Mg Alloy Subjected to ECAP. Solid State Phenomena 326, pages 33-50.
Crossref
Jonghyun Jeong, Yukyeong Lee, Jeong Min Park, Dong Jun Lee, Ikgeun Jeon, Hoon Sohn, Hyoung Seop Kim, Tae-Hyun Nam, Hyokyung Sung, Jae Bok Seol & Jung Gi Kim. (2021) Metastable δ-ferrite and twinning-induced plasticity on the strain hardening behavior of directed energy deposition-processed 304L austenitic stainless steel. Additive Manufacturing 47, pages 102363.
Crossref
Yuntian Zhu. (2021) Introduction to Heterostructured Materials: A Fast Emerging Field. Metallurgical and Materials Transactions A 52:11, pages 4715-4726.
Crossref
S. Fida Hassan. (2021) Designing heterogeneous microstructured superior strength-ductility magnesium by blend-press-sinter powder metallurgy process. The International Journal of Advanced Manufacturing Technology 117:5-6, pages 1547-1555.
Crossref
Qing Miao, Wenfeng Ding, Jiuhua Xu, Lijie Cao, Hongcai Wang, Zhen Yin, Chenwei Dai & Weijie Kuang. (2021) Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy. International Journal of Extreme Manufacturing 3:4, pages 045102.
Crossref
Jingran Yang, Le Xu, Hongliang Gao, Xingfu Li, Hongjiang Pan, Baipo Shu, Takamoto Itoh, Yuntian Zhu & Xinkun Zhu. (2021) Effect of global constraint on the mechanical behavior of gradient materials. Materials Science and Engineering: A 826, pages 141963.
Crossref
Shuang Zhang, Fei Wang & Ping Huang. (2021) Enhanced Hall-Petch strengthening in graphene/Cu nanocomposites. Journal of Materials Science & Technology 87, pages 176-183.
Crossref
Jianfeng Zhao, Michael Zaiser, Xiaochong Lu, Bo Zhang, Chongxiang Huang, Guozheng Kang & Xu Zhang. (2021) Size-dependent plasticity of hetero-structured laminates: A constitutive model considering deformation heterogeneities. International Journal of Plasticity 145, pages 103063.
Crossref
Wufan Chen, Panpan Wan, Qingkun Zhao & Haofei Zhou. (2021) Constitutive Description of Extra Strengthening in Gradient Nanotwinned Metals. Nanomaterials 11:9, pages 2375.
Crossref
Qiong He, Wei Wei, Ming-Sai Wang, Feng-Jiao Guo, Yu Zhai, Yan-Fei Wang & Chong-Xiang Huang. (2021) Gradient Microstructure Design in Stainless Steel: A Strategy for Uniting Strength-Ductility Synergy and Corrosion Resistance. Nanomaterials 11:9, pages 2356.
Crossref
Qian Cheng, Yanfei Wang, Wei Wei, Fengjiao Guo, Qiong He, Mingsai Wang & Chongxiang Huang. (2021) Superior strength-ductility synergy achieved by synergistic strengthening and strain delocalization in a gradient-structured high-manganese steel. Materials Science and Engineering: A 825, pages 141853.
Crossref
Fei Liang, Zhe-Xuan Wang, Yan-Wen Luo, Bin Zhang, Xue-Mei Luo & Guang-Ping Zhang. (2021) Enhancing co-deformation ability of nanograined Ni-W layers in the Ni/Ni-W laminated composites. Acta Materialia 216, pages 117138.
Crossref
Jilong Geng, Zhifeng Yan, Hongxia Zhang, Yongquan Liu, Peng Dong, Shuo Yuan & Wenxian Wang. (2021) Microstructure and Mechanical Properties of AZ31B Magnesium Alloy via Ultrasonic Surface Rolling Process. Advanced Engineering Materials 23:9.
Crossref
Dong Geun Kim, Yong Hee Jo, Taejin Song, Hyoung Seop Kim, Byeong-Joo Lee, Seok Su Sohn & Sunghak Lee. (2021) Excellent strength-ductility combination of multi-layered sheets composed of high-strength V10Cr10Fe50Co30 high entropy alloy and 304 austenitic stainless steel. Materials Science and Engineering: A 823, pages 141727.
Crossref
Zhenxin Duan, Xiaolei Song, Ying Han, Wen Pei & Hua Chen. (2021) Enhancing high-temperature strength and ductility of γ-TiAl matrix composites with controllable dual alloy structure. Materials Science and Engineering: A 823, pages 141723.
Crossref
Jianfeng Zhao, Xiaochong Lu, Jinling Liu, Chen Bao, Guozheng Kang, Michael Zaiser & Xu Zhang. (2021) The tension-compression behavior of gradient structured materials: A deformation-mechanism-based strain gradient plasticity model. Mechanics of Materials 159, pages 103912.
Crossref
Jia-Lin Wu, Ming-Guo Zhai, Bo Hu, Hua-Feng Zhang, Xu Chu, Ning-Chao Zhou, Le Zhang & Hong Zhang. (2021) Garnet perspectives on the metamorphic history and tectonic significance of Paleoproterozoic high-pressure mafic granulites from the northern Hengshan, North China Craton. Lithos 394-395, pages 106139.
Crossref
Yanhui Liu, Zhaozhao Liu & Miao Wang. (2021) Gradient microstructure evolution under thermo-mechanical coupling effects for a nickel-based powder metallurgy superalloy－Dynamic recrystallization coexist with static recrystallization. Journal of Materials Processing Technology 294, pages 117142.
Crossref
Yang ZHOU, Wei-jun HE, Jia-teng MA, Ze-jun CHEN & Qing LIU. (2021) Annealing hardening and deformation behavior of layered gradient Zr–Ti composite. Transactions of Nonferrous Metals Society of China 31:8, pages 2358-2371.
Crossref
Xiaomeng Zhou, Lingyi Sun, Wenwei Sun & Xiangyang Mao. (2021) Study on the Stability of Microstructure and Mechanical Properties of Gradient Refined Microstructure on Low-Carbon Steel Surface. Journal of Materials Engineering and Performance 30:8, pages 5667-5672.
Crossref
J. H. Zhang, X. M. Liu, G. S. Zhang, W. K. Deng, J. Y. Hao, M. Li & D. F. Guo. (2021) Microstructure evolution and formation of gradient structure in Zr upon surface corrugation rolling treatment. Journal of Materials Science 56:22, pages 12898-12908.
Crossref
Shuang Qin, Muxin Yang, Fuping Yuan & Xiaolei Wu. (2021) Simultaneous Improvement of Yield Strength and Ductility at Cryogenic Temperature by Gradient Structure in 304 Stainless Steel. Nanomaterials 11:7, pages 1856.
Crossref
Sumit Ghosh, Nitish Bibhanshu, Satyam Suwas & Kaushik Chatterjee. (2021) Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility. Materials Science and Engineering: A 820, pages 141540.
Crossref
Shuo Ma, Liming Fu & Aidang Shan. (2021) Enhancing strength-ductility of the aluminum bronze alloy by generating high-density ultrafine annealing twins. Materials Characterization 177, pages 111057.
Crossref
Haojie Kong, Zengbao Jiao, Jian Lu & Chain Tsuan Liu. (2021) Low-carbon advanced nanostructured steels: Microstructure, mechanical properties, and applications新型低碳纳米钢: 微观组织、机械性能与应用. Science China Materials 64:7, pages 1580-1597.
Crossref

Displaying 200 of 415 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.